ROSS CPU didn't work with kernel patch 112233-07

Just noticed my HyperSPARC (ROSS CPU for S10/S20) had problem with kernel patch.
Got 2 X 180Mhz ROSS CPUs running fine with Solaris 9 (kernel level 112233-07) on S20 until applied the Recommended patches set (kernel level 112233-12), once the patches set installed and reboot, the S20 won't boot up anymore and showed some error on the kernel...
Reinstall again the Solaris 9 (kernel level 112233-07), and applied the Recommended patches set without kernel patch 112233-12, system boot up fine without issue.
Was looking around but didn't find anyone else got same issue (even on Sunsolve site) like me, maybe the box is too old to play with...
Cheers,

Oops, put wrong patch ID in subject...

Similar Messages

  • This Built-in didn't work with me ....... why?

    this Built-in didn't work with me ....... why?
    show_view
    and
    hide_view
    is suppose to add anything for them until they work?

    Check the 'raise on entry' property of your canvases, and 'hide on exit' property of the windows they're in. If your current item is on a canvas with Raise on Entry = Yes, for instance, trying to show another view on top of it without navigating to an item on that canvas won't have any effect.

  • When i update my iPhone 4s through iOS 7 with my mac, i tunes told me that an upgrade was necessary to sync with the new iOS 7 and of course i updated my iTunes to the ultimate version but my mac didn't work with this version of i tunes. What can i do

    when i update my iPhone 4s through iOS 7 with my mac, i tunes told me that an upgrade was necessary to sync with the new iOS 7 and of course i updated my iTunes to the ultimate version but my mac didn't work with this version of i tunes. What can i do

    Hello,
    Only option is upgrading your Mac's OSX, since Apple will not allow iOS to go backwards.
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 4GB at least, more if you can afford it)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
    Other countries...
    http://support.apple.com/kb/HE57
    It looks like they might still have it...
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

  • I had a Tascam US 122 usb interface, but it didn't work with OSX Mavericks. What model would work with this? Would the US-144 mkii work with my system?

    I had a Tascam US 122 usb interface, but it didn't work with OSX Mavericks. What model would work with this? Would the US-144 mkii work with my system?
    Thanks!

    You didn't mention the kind of track in GB you are trying to create, but if you are connecting the keyboard with a guitar chord to the Tascam, you will need to set up a Real Instrument Track in GB to hear anything. If your keyboard has a midi out, use a midi cable to the midi input of the Tascam, create Software Instrument Track, and you will hear something. But with a guitar chord, it won't send the right signal to a Software Instrument Track. The headphone jack in the Tascam monitors the signal coming back to it out of GB (if you choose the US-122 as your monitor in GB's preferences), so you wouldn't hear your keyboard if the track is not set up correctly. It could be the drivers, but since you didn't mention the type of keyboard or the type of GB track, I thought that might be a possible answer as well.
    eMac   Mac OS X (10.3.8)  

  • KMC didn´t work with pcd write-protect mode

    Hello,
    I have activated the write-protect mode for the PCD in our Portal. Everything is working fine.
    After restarting the portal-server, the kmc-component didn´t work anymore. After disabling the write-protect mode and restarting the server, kmc works again.
    I read a sap-note (1148777), that this problem was fixed with SPS 15 KMC-Patch 1. Our portal is on SPS 15 with latest patch-releases.
    Any idea ?
    Thx for your reply!
    Oliver

    The concurrent mark sweep collector you get with -Xincgc isn't a compacting collector. It doesn't move objects. So while it can grow the heap if needed, it can't give those pages back to the operating system, as you want by turning -XX:MaxHeapFreeRatio= down that far.

  • Reading the EDI X12 file not working with the patch 8233048

    Hi
    I have installed the latest path 8233048 on my windowsXP system, now I am not able to see the File being polled and processed.
    In b2b.log I can see the last message as "oracle.tip.adapter.b2b.data.MsgListener:run start listening on message" after that no log.
    In b2b_dc_transport.log, I can see only
    2009.02.07 at 20:35:45:236: B2BStarter thread: (DEBUG) TransportProperties.TransportProperties():http.receiver.registry_port=5110;smtp.receiver.protocol=imap;PROTOCOL_ENDPOINT=null;file.receiver.polling_interval=30;polling_interval=30;http.receiver.instance_name=IP;
    2009.02.07 at 20:35:45:266: B2BStarter thread: (DEBUG) initialize TransportReceiver: [IRIS_Transport_Server < file > < IRIS >]
    2009.02.07 at 20:35:45:266: B2BStarter thread: (DEBUG) FileReceiver.init() started ....
    2009.02.07 at 20:35:45:287: B2BStarter thread: (DEBUG) FileReceiver.init() completed.
    Could you please tell me if I need to do any changes.
    This is working on b2b with only patch: 5907304 which is installed in another windows XP system.
    The same configuration with the latest patch is not working.
    Edited by: Praveena Paruchuru on Mar 7, 2009 7:56 AM

    Hi Dheeraj,
    I have restarted my system many times, not only B2B.
    I have taken the print out of both the tip.properties and compared line by line and wanted to check out which line was making it not to function.
    I added the mismatching lines one by one by one, it was working for all teh updates. Finally I changed it to my new tip.properties.
    Then surprisingly it is working.

  • [SOLVED] Photoshop CS2 stops working with kernel 2.6.27

    after upgrade to 2.6.27 my PS CS2 under wine stopped working with the error:
    I tried to downgrade/upgrade/recompile wine (1.1.6/1.1.5/1.1.7) but  no impact
    I have full copy of my old root partition on hda5 and when I boot to this one PS is working properly
    any clue where to look for problems ?
    thanks
    Last edited by zyghom (2008-10-28 19:52:12)

    removing ~/.wine and installing PS CS2 from the scratch solved the problem
    wine devs refused this bug anyway ;(

  • Skype didn't work with free trial, will it work if...

    I tried a skype free trial once, it was like a dollar free, and couldn't call anyone. I'd like to use skype, specially since these days it seems there is way less delay. But i don't wanna buy service if its not gonna work for me. Last time i would call numbers but people wouldn't get the call, so i gave up. Could i get a free trial again? It's been awhile and i was using a different OS at the time so i'd like to try it again.

    I didn't work for me as well. It's a shame. Skype offering something that doesn't work.
    I paid the "free", tried to make a call to a cell phone in another country and...bang! 20 cents per minute.

  • Real Player download not working since I updated FF.... It didn't work with the latest version of FF so I reinstalled vrevious FF but still can't get Real Player to work again.

    I lost the Real Player download capabillity when FF updated to FF4..... The plug ins for Real Player still show on the add on screen but no " download this video" shows when I mouse over a video.... I tried reverting to earlier version of FF which had worked well for Real Player donloads but it no longer works either.
    How can I get Real Player to work with FF again?

    Many thanks b Noir
    This is a copy of ONEof the keys  in the registry I changed  as told by Apple support today. I also have changed others as instructed by GEAR  software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others  they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so  I downloaded the software and installed again.
    Sorry, just this minute went to insert image  and it is giving me a message saying this sort of content  is not allowed?.
    The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr  SiRem GEARAspiWDN.
    The GEARsoftware info about manually deleting  GEAR drive is from:
    http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
    I hope you can help

  • Fixed Loop Component didn't work with Variables

    Hi All,
    I am developing a classic planning application using EPM 11.1.2.2
    I am writing a business rule in which i need to iterate "N" times. The value of this "N" is always stored in an execution variable.
    The business rule work absolutely fine if i provide some static value in the "Value" field of fixed loop.
    In case if i provided execution variable in "Value" field of fixed loop the loop didn't iterate. However the rule validated and deployed successfully.
    Please note i am developing my business rules using EPM Calculation Manager.
    Following Code Works
    {index} = 10;
    LOOP (10)
    Following Code Didn't Work
    {index} = 10;
    LOOP ({index})

    AlpBurak already explained it for you. I'm a big fan of loop (and Alp) so just adding to what Alp said.
    You can add a higher number in loop and come out of it by setting a break (1, if you are using a variable then set the variable value to 1)
    Oracle Essbase Technical Reference
    Regards
    Celvin
    http://www.orahyplabs.com

  • CDROM/DVD not working with kernel 2.6.15

    I just upgraded to 2.6.15 kernel, unfortunately my  CDROM/DVD drive no longer works. It did well with the 2.6.12 kernel series. I provide the attached data for you:
    [root@dragonheart leviathan]# lshwd
    00:00.0 Host bridge: Intel Corp.|875 DRAM Controller / Host-Hub Interface (intel-agp)
    00:03.0 PCI bridge: Intel Corp.|82875P Processor to PCI to CSA Bridge (unknown)
    00:1c.0 PCI bridge: Intel Corp.|Enterprise Southbridge Hublink PCI-X Bridge (unknown)
    00:1d.0 USB Controller: Intel Corp.|Enterprise Southbridge USB 1.1 UHCI (uhci_hcd)
    00:1d.1 USB Controller: Intel Corp.|Enterprise Southbridge USB 1.1 UHCI (uhci_hcd)
    00:1d.4 System peripheral: Intel Corp.|Enterprise Southbridge Watchdog Timer (unknown)
    00:1d.5 PIC: Intel Corp.|Enterprise Southbridge IOxAPIC (unknown)
    00:1d.7 USB Controller: Intel Corp.|Enterprise Southbridge USB 2.0 EHCI (ehci-hcd)
    00:1e.0 PCI bridge: Intel Corp.|82820 815e (Camino 2) Chipset PCI (hw_random)
    00:1f.0 ISA bridge: Intel Corp.|Enterprise Southbridge ISA Bridge (ichxrom)
    00:1f.2 IDE interface: Intel Corp.|IDE (SATA) (ata_piix)
    00:1f.3 SMBus: Intel Corp.|Enterprise Southbridge SMBUS (i2c-i801)
    02:01.0 Ethernet controller: Intel Corp.|82547EI Gigabit Ethernet Controller (e1000)
    04:02.0 VGA compatible controller: ATI Technologies Inc.|Radeon 7000/Radeon VE (radeon)
    04:07.0 Multimedia audio controller: C-Media Electronics Inc.|CM8738 (snd-cmipci)
    04:08.0 Ethernet controller: Realtek Semiconductor|TTP-Monitoring Card V2.0 (8139too)
    003:001 USB Hub: Virtual|Hub (hub)
    002:001 USB Hub: Virtual|Hub (hub)
    001:001 USB Hub: Virtual|Hub (hub)
    ---:--- Mouse: Generic PS/2 Wheel Mouse [/dev/psaux] (msintellips/2)
    [root@dragonheart leviathan]# hwdetect --show-modules
    AGP    : agpgart intel-agp
    IDE    : ide-core generic
    SCSI   : sd_mod
    SATA   : ata_piix libata
    USB    : usb-storage usblp usbhid usbcore ehci-hcd uhci-hcd
    NET    : 8139cp 8139too e1000 mii ppp_generic slhc
    SOUND  : snd-mixer-oss snd-pcm-oss snd-seq-oss snd-seq-device snd-seq-midi-event snd-hwdep snd-page-alloc snd-rawmidi snd-timer snd snd-mpu401-uart snd-opl3-lib snd-cmipci soundcore
    OTHER  : hw_random lp ppdev rtc i2c-i801 i2c-core evdev gameport pcspkr serio_raw parport parport_pc pci_hotplug shpchp

    Check lsmod if libata is installed.
    I remember seeing something that libata needed to be added manually to make DVD/CD work.

  • JRE/JDK 1.3.1_19 Not working with OS Patched Windows 2003 Server DST 2007

    Hello:
    We are trying to upgrade our 1.3.1_03 application with 1.3.1_19. It worked fine in a machine (WIndows Server 2003) where OS was not patched for DST. However, as far as I could see if the OS is patched the DST compliant java (1.3.1_19) is not working.
    I go to the jre/bin and try to do a java -version and I see nothing from OS patched machine.
    Non-OS Patched machines, it works and I could see the java version.
    Has anybody faced this problem?
    Really appreciate any suggestion.
    Cheers,
    Abdullah

    Hey
    came across same problem. but dont know for sure if it is the DST patch that is the problem. if you have come across anything further update on the issue let us know.
    Cheers

  • USB Storage devices not working with kernel in repositories [Solved]

    I am experiencing a quite vexing problem with my USB Mass Storage devices, when I plug one in I get the following error in my dmesg:
    [ 1811.976758] usb 2-2: new high speed USB device number 5 using ehci_hcd
    [ 1812.101854] scsi7 : usb-storage 2-2:1.0
    [ 1813.102576] scsi 7:0:0:0: Direct-Access     Verbatim STORE N GO       2.68 PQ: 0 ANSI: 2
    [ 1813.103818] sd 7:0:0:0: [sdb] 3913728 512-byte logical blocks: (2.00 GB/1.86 GiB)
    [ 1813.104327] sd 7:0:0:0: [sdb] Write Protect is off
    [ 1813.104331] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
    [ 1813.105567] sd 7:0:0:0: [sdb] No Caching mode page present
    [ 1813.105572] sd 7:0:0:0: [sdb] Assuming drive cache: write through
    [ 1813.107560] sd 7:0:0:0: [sdb] No Caching mode page present
    [ 1813.107565] sd 7:0:0:0: [sdb] Assuming drive cache: write through
    [ 1813.108340]  sdb: sdb1
    [ 1813.112180] sd 7:0:0:0: [sdb] No Caching mode page present
    [ 1813.112186] sd 7:0:0:0: [sdb] Assuming drive cache: write through
    [ 1813.112190] sd 7:0:0:0: [sdb] Attached SCSI removable disk
    [ 1813.196828] sdb: detected capacity change from 2003828736 to 0
    In the /dev/ folder on the device shows up, not the partitions. When I try to open it with cfdisk I get "FATAL ERROR: Cannot open disk drive". I am pretty sure it iss neither a hardware problem with my laptop or my usb devices, as they both work on my dual-booted Ubuntu. My usb ports in general seem to be functioning, I can still charge a phone through them and use my built in USB webcam.
    I am not sure where exactly this issue lies, it started after I upgraded to 3.0.7 (among other updates) from the normal repositories, but still persisted after I downgraded to 3.0.6.
    My attempts at Googling have so far revealed mainly hardware errors, which don't seem to fit with the devices working on another OS on the same pc.
    Thanks.
    Last edited by MartianW (2011-11-09 16:30:15)

    Same problem. I try to mount different devices. For each device same result.
    The file /var/log/error.log is full of this kind of messages:
    Nov  4 21:34:18 moria kernel: [  113.455195] sd 6:0:0:0: [sdb] No Caching mode page present
    Nov  4 21:34:18 moria kernel: [  113.455200] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Nov  4 21:35:29 moria kernel: [  184.077728] sd 7:0:0:0: [sdb] No Caching mode page present
    Nov  4 21:35:29 moria kernel: [  184.077736] sd 7:0:0:0: [sdb] Assuming drive cache: write through
    Nov  4 21:35:29 moria kernel: [  184.080720] sd 7:0:0:0: [sdb] No Caching mode page present
    Nov  4 21:35:29 moria kernel: [  184.080730] sd 7:0:0:0: [sdb] Assuming drive cache: write through
    Nov  4 21:35:30 moria kernel: [  184.808109] sd 7:0:0:0: [sdb] No Caching mode page present
    Nov  4 21:35:30 moria kernel: [  184.808116] sd 7:0:0:0: [sdb] Assuming drive cache: write through
    Nov  4 21:41:10 moria kernel: [  525.107109] sd 8:0:0:0: [sdb] No Caching mode page present
    Nov  4 21:41:10 moria kernel: [  525.107114] sd 8:0:0:0: [sdb] Assuming drive cache: write through
    Nov  4 21:41:10 moria kernel: [  525.110615] sd 8:0:0:0: [sdb] No Caching mode page present
    Nov  4 21:41:10 moria kernel: [  525.110619] sd 8:0:0:0: [sdb] Assuming drive cache: write through
    Nov  4 21:41:11 moria kernel: [  525.841487] sd 8:0:0:0: [sdb] No Caching mode page present
    Nov  4 21:41:11 moria kernel: [  525.841491] sd 8:0:0:0: [sdb] Assuming drive cache: write through

  • [SOLVED] HP Touchpad not detected or working with kernel 3.4.6-1

    On my HP Folio 13 (https://wiki.archlinux.org/index.php/HP_Folio_13), the touchpad stopped working tonight after upgrading to kernel 3.4.6-1.
    Downgrading back to 3.4.5 fixed it. I've tried AUR xf86-input-synaptics-led and the stock xf86-input-synaptics packages.
    Doesn't even seem to be detected, as there's not even a mention or reference to "synaptics" in /var/log/xorg.0.log, and it's nowhere to be found under /dev/inputs/.
    It isn't listed under "xinput -list" either (normally shows as "SynPS/2 Synaptics Touchpad").
    Last edited by sultanoswing (2012-07-26 08:18:15)

    anrxc wrote:Hello you need to rebuild synaptics-led with the new kernel if you have it installed. It replaces/overrides psmouse module in the kernel, and if it fails to load you would be left without a touchpad.
    Yep that was the problem. I'd forgotten I'd compiled and installed the psmouse module using synaptics-led (/face-palm)
    The AUR package, along with xf86-input-synaptics-led, did make the double-tap top-left corner hotspot work to turn the touch pad on and off. The LED light showing whether the pad is on or off never worked, however.
    So - I'm now back to stock xf86-input-synaptics and on kernel 3.4.6-1 and all is working as it should.

  • How to reduce CPU Utlisation while working with OLAP Cubes?

    Hi All,
    I am working on OLAP cubes on MS SQL Server 2005. I have imported the same in the OBIEE rpd and when I query it in answers, the CPU Utilisation increases to 98%.
    So the results also take pretty much time to get displayed.
    Is there any other method with which I can reduce the CPU usage?
    Regards,
    Apoorv

    Sorry, but that's like asking "My Data Warehouse is slow! What can I do?!".
    Starting from the top of the food chain it depends on:
    - how your report is built
    - what the logical SQL is that this report fires against the BI server
    - your logical business model
    - your physical model in the rpd
    - whether you use BI server aggregation or external aggregation for the cube source columns
    - the structure of your cube
    - whether your cube is pre-aggregated or not
    - whether you did any performance tuning or your cube
    ...and tons of other things. I can query 5 dimensions with thousands of dynamic and shared members against dynamic accounts (not stored) without performance impact if I'm hitting an optimized cube (or area of my cube) but have > 1min performance for another comparatively simple query which queries a non-aggregated cube and does aggregation within the BI server (just as an example).
    Start by verifying that your cube is nicely built.

Maybe you are looking for