Rotate a video clip and arbitrary amount (not as much as 90 degrees)
I would like to rotate a video clip by a small amount (3-5 degrees) because I didn't have my tripod level when I shot it. This is something I can do in Photoshop with stills. I think it may be possible in FCE if I enlarge the image first. Can anyone talk me through it. I've checked the previous discussions and can't find the full answer to this.
Thanks
John
1. Make sure the footage is not interlaced.
That means it should be progressive, which is the same as Field Dominance: None.
2. Open the clip in the Viewer.
3. Click on the Motion Tab.
4. Adjust Rotation.
5. Adjust Scale to eliminate black around the edges.
Similar Messages
-
I am trying to put a transition between two clips and it's not going.
I am working in FInal Cut Pro X and until now have had no problem putting trasitions into my timeline. Now I'm trying to put it between two video clips and it's not even moving there. Is there something I might have turned off that's not allowing me to do this
You mean red like this
That's the end of the media. No handles for an overlap. You can still do a full overlap transition, but it will shorten the project and shift the content. -
When I rotate my video clip so that is isn't viewed sideways, it has black bars on both sides and some of picture is missing. Can I rotate the image so it plays rightside up without the black bars? The image was taken by an iPhone. I am viewing it on PC
Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution! -
Does anyone know if/how to rotate a video clip in iphoto? I shot it so that it plays sideways on my computer and I cannot figure out how to rotate it. Thanks.
You can't do that in iPhoto. You'll need a video editor like iMovie for the job.
Regards
TD -
iPod nano version 6: random turn off, volume controls don't work, does not turn off, skip does not work. Two years old! Next version of nano has no clip and same amount of storage. I do not want to give up my version 6!
Make a Genius Bar appointment at your nearest Apple Store and pay $75 USD for an out-of-warranty replacement.
-
Is there any way to rotate a video clip in FCE. The video needs to be rotated into an upright position. It is on its left side.
I might add that I found Effects >Perspective >Rotate, but it elongates the video and is now out of proportion.
So is there a way to do this where it doesn't tweak the video itself?
Thanks
Message was edited by: pjkinannHmmm......something happens to the video when it's rotated. It doesn't play well, and seems like it's in slow motion. The video is of piano playing so now the fingers are way behind the touching of the keyboard and the audio. It's weird. I guess rotating the video also distorts it in that respect?
It also cuts off half of the video image. So where as the entire keyboard could be viewed before, now only 1/2 the keyboard can be viewed.
So is this just something that one has to accept when rotating a video? that it will be changed completely? and will not sync up -- movement to audio? Or should it still sync?
Message was edited by: pjkinann -
Can you help me rotate my video clip in iMovie ? I followed the instructions in the Help menu, but was stuck on Step 3 - after I had selected the entire Clip and then was unable to click on the "Cropping Button".
Are you in the timeline? You can't access the crop button if the clip is in the browser.
-
Video clips and animated content works on AC ?
Hi
I have to show a PPT presentation which includes an AVI video clip, but it does not work > black area instead of the video
Another problem when I try to share an application with animated contents (Stellarium, a program that shows stars and constellations on a virtual sky) : it's laggy and dirty on the screen (see the pictures)
[URL=http://www.hostingpics.net/viewer.php?id=860565Sanstitre3.jpg][IMG]http://img11.hostingpics.net/thumbs/mini_860565Sanstitre3.jpg[/IMG][/URL] [URL=http://www.hostingpics.net/viewer.php?id=765489Sanstitre1.jpg][IMG]http://img11.hostingpics.net/thumbs/mini_765489Sanstitre1.jpg[/IMG][/URL]
My question: is the animated content (video clips, 3D animations etc...) working with Adobe Connect ?
Thanks a lot !I have the same question regarding the animated content and Adobe Connect.
Thanks,
http://www.FreeMBB.com -
How do I adjust video clip and audio start times?
I cant figure out how to adjust the start time of video clips and songs. I want my music and video clips to start at different times. I am trying to have music and pictures start at the same time at the begining of the movie then transition into my videos at a specific time. Also i am wondering if there is a way to combine the whole video and image segment into one block and be able to shift it up and down the timeline? Does anyone know how to do this? Thanks
FreshlySnipes wrote:
… I want my music and video clips to start at different times. ...
instead of adding music to the background, 'stick' the music-clip to your video clip => the music appears as a green bar, you can move, shorten etc as any other clip.
… if there is a way to combine the whole video and image segment into one block and be able to shift it up and down the timeline? …
not in iMovie.
this is one of the major features (grouping and magentic timeline) of FCPX -
My iphone 4 microphone won't record sound on video clips and doesn't work with Skype
This is the first time I have used the forum. My iphone4 microphone won't record sound on video clips, and won't work with Skype.
I have checked that I have the latest software. I have restarted phone. I am not sure how to perform the other things you mentioned , restore and reset as new... Would I lose any data by doing these? Thanks for the reply.
-
How can I match sound quality between video clips and audio clips?
Hi guys,
First of all let me say that I enjoy using the latest Media Encoder. However, as a novice, I have two related problems.
1.I am recording video to use with PowerPoint slides in Adobe Captivate. I am encoding the video with best quality FLV. This produces very good video,
but with a degraded audio track, even though I had filtered the audio in soundbooth. The post encoding sounds like it did before Soundbooth corrections.
2. Some of the video recording has been set cut into audio clips to be used as background narration behind PowerPoint. The logic behind this is: that if both are
recorded at the same time, the voice quality should match.
This is far from the outcome. I have tried MP3 for the audio which of course produced the best sound- but is entirely unlike the rest of the video. I have also encoded the audio with Windows Waveform preset figuring that since the soundbooth edit was a .wav file, that there should be a reasonable match. Wrong again!
So, the audio quality of all clips is poor, and the difference between the encoded video clips, and the audio encoded clips spoils the otherwise professional result in Captivate.
Please help, all of you experts.Thank you.
OS Windows 7 x 64; 3.2 MHz; 2 TB; 12 GB Ram-9GB ram allocated to Adobe.
My process is this:
1. The whole video and audio narration material is shot in one continuous video sesseion.
2. The microphone is only mono, but the camera is set to stereo. Noone can work out how to change the camera to mono.
3. In Premiere Pro 5, I select render and replace in SoundBooth.
4. In Soundbooth, I choose Add Multichannels.
5. In Multichannels, I delete the unwanted noisy channel, and any other unused channels.
6. With the remaining mono channel, I then select Export and Save As option, then Stereo.
7. Next I edit the stereo channels as needed.
8. The imported stereo won't automatically update in Premiere Pro, so in PPR I import the new edited stereo track.
9. I test this track in PPR, to check that it is playing R & L channels. It is. OK.
10 On the timeline, I proceed to cut apart this single stereo wavelength .
11.These clips are saved as Video, or Audio subclips.
12 From the video subclips, I export to Media Encoder, and choose either FLV4 match attributes (High Q). This I modify to custom 2 pass (Custom save).
The summary says that this is saved to MP3 Stereo.
13. I import this into Captivate 5, but the Video outcome is Left channel only. I have tested this on Media Player/Real Player where it is also L channel only.
14. I export my Audio subclips to Media player, and select MP3 option and this summary also reports stereo. The Audio outcome is stereo, when played in any player and in Captivate 5.
I cannot understand how a single, continuous track edited uniformly in Soundbooth to stereo, can produce different outcomes in Media player.
I would so appreciate a solution to this problem, because, in the Captivate 5 e-learning production, the switch between stereo audio (behind PowerPoints), and l. channel video is distracting. Naturally, the l. channel only is a thin sound. It is as if it had never been edited in SoundBooth at all. -
My current project is like many I have created in the past. I have removed the sound from my video clips and laid another soundtrack under the entire project. Now, when I add an iphoto still image to the project, when it goes back into video there is a popping sound. I've never had this happen in the past and have made many projects in the past just like this one. Any way to troubleshoot this issue? Thanks so much for your help.
BenWhat audio output are you using? What mac and version iMovie
-
Can I rotate a video clip in imovie
CCan I rotate a video clip in imovie
Hello Sandra Seaman,
Thanks for using Apple Support Communities.
Yes, you can rotate a clip in iMovie. Check out the link below for instructions.
Rotate a clip
Take care,
Alex H. -
Need to remove video clip and save audio track.
We are trying to remove a segment of video clip and save the audio track that goes with it. We intend to fill that open segment with transitions of still photos, all the while allowing the narrator, who has now been "clipped" to keep speaking.
We are using CS3 Premier Pro.
Any advise would be greatly appreciated! Thanks for your wisdom...
Mary M.
Yellowstone National Park.Mary,
I find that just Alt-clicking on the Video and hitting Delete to be the quickest method. That does exactly the same as Unlinking, with two keystrokes - Atl-click Video, Del key.
Hope that helps,
Hunt -
just got fcp, how do mute the sound on the video clip so it does not come through the audio track?
Please helpDon't edit the audio into the timeline. Or pull the audio level down to zero in the inspector or on the audio waveform in the timeline.
Maybe you are looking for
-
Wheel click does not work anymore
Hello, as an internet heavy user I use to open links in new tabs. That was very easy using the mouse wheel click. But since last update it doesnt work anymore neither Firefox nor Safari. I have a logitech mouse [1] and that's what I have checked prio
-
We just got Apple TV and need help with netflix. We don't see netflix as an option to select. Could someone advise how to set up netflix?
-
SQL Developer 3.2.10.09.57 Hangs
Is anyone else seeing SQL Developer 3.2.10.09.57 hang after using the Find DB Object function? I can reproduce this issue. I'm connected to 11gR2 instances. I have reverted to SQL Developer 3.1 due to this issue.
-
List Does not Exist (only on mac)
So I've tried trouble shooting this through any permissions and I've narrowed it down to one thing. Mac... I've tested (internally) creating events and creating tasks and what not on a PC and it works fine for the user. I have then tested the same us
-
h