Rotate external Monitor on T60

Is is possible to rotate an external monitor on a T60 running XP?
Thanks in advance for any help.
David
Moderator Note; please update your profile with your correct country location as per the forum rules. Products, options and services vary from market to market. Knowing your location helps us help you
Message Edited by andyP on 11-06-2008 11:26 PM

I would suggest looking at the monitors manufacturer's web site for possible drivers or software.
I read an article from a very old OS "how to" that if you held down the option key while opening System Preferences and continued to hold the option key while you selected Displays, you might get an an option to rotate. I can't test it since I don't have an external monitor.

Similar Messages

Rotate external monitor on OSX 10.8.2

Seems to be an OSX "feature" not to being able to rotate an extarnal monitor to portrait mode.
Got a j5create USB graphic card, also tried a USB 3.0 DiplayLink but nothing works. At least the j5create does get the external display to work, but I can't rotate it.
Is there any solution? Is it a driver problem or do I have to wait for an OSX update?

I would suggest looking at the monitors manufacturer's web site for possible drivers or software.
I read an article from a very old OS "how to" that if you held down the option key while opening System Preferences and continued to hold the option key while you selected Displays, you might get an an option to rotate. I can't test it since I don't have an external monitor.

Rotating external monitor on 10.10.2 also rotates LCD of laptop

Hi,
I am using Late 2013 15" Retina Mackbook Pro with OS X 10.10.2. I bought a DELL U2414H as my external monitor today. However, when I tried to rotate it by 90 degrees, the LCD screen of my MBP rotated as well. I am connecting U2414H to my MBP with display port and enabled DisplayPort 1.2. The resolutions on both screen are set to the default value. Please help me with it.
Best,
Alan

What happens if you specify that Displays have Separate Spaces?

Aero switches off when extern monitor is rotated by Nvidia ControlPanel

Please see subject
Aero works fully when desktop is expanded to the 2nd monitor in normal view.
any workaround ?
Message was edited by: mhoffmann
sorry, I forgot to mention my hw: Satellite a100-02b ( geforce go 7600 )
.. and when I reboot Vista behaves a bit strange.
a few seconds all seems ok but then it sets back the external monitor to 16-bit colour and minimum Vfrequency ( 60 HZ )
and a message pops up that the "Desktop windows manager" has been closed due to a problem.
Is this perhaps because..
1) It's an old CRT, not specially known ( standard pnp-driver )?
2) the vista capability of the graphics adapter is not sufficient in this configuration ?
I heard somewhere that there is a switch in the registry, that disables the dwm.exe's test, whether the hardware is
able to support the aero-technologies. would that be a way to fix that ?

Hi,
and thanks!
> Anyway, I try to understand what you did on the
> notebook
> You have switched the display to the second external
> monitor then you have changed the display position
> (you have rotated the display) and you have tried to
> use the Aero on the external monitor.
> Am I right???
No I've EXPANDED the desktop to the 2nd monitor. In normal view Aero works right then on BOTH monitors.
Only when I rotate the extern monitor this problem occurs.
I think, that this special configuration is a bit unique ( but very comfortable to work on )
and therefore not foreseen ( eeh, sorry for my english ) by the programmers of the drivers or
the dwm-team at MS.
ok, when I add the 1280*800 of the laptop screen and the 768*1024 of the CRT
I end up at 2048*1024 ( the unused area included )which is quite near to the absolute maximum of 2048*1536 the graphics adapter
supports on ONE monitor at all. Perhaps that's just too much...
on the http://support.toshiba-tro.de/kb0/TSB7101O90002R01.htm you mentioned, the limit for aero with my 128 MByte VideoRam
would be 2.304.000 pixels - but only when one monitor is in use. There's no information about multi-monitor use.
so what, Aero is not that important, but when I have some time again, I will experiment a bit...
Ciao !

T60 - external monitor

I just installed a new 19 inch external monitor for my notebook T60. I would like to use the new monitor exclusively and close my notebook, while I am working. when I close my notebook, the new monitor goes into standby mode.
what settings do I need to change? thanks.
Solved!
Go to Solution.

billryan37, welcome to the forum,
you need to change the settings in power management, windows and Lenovo to be doubley safe, so that when closing the lid it does nothing rather than go into standby or something else.
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

T60 win7 x1400 external monitor crashes...

hi, i am running a t60 with x1400 and a postville ssd. at the moment my computer crashes regualry after a while when i connect an external monitor. doesn't matter if direct or via docking station. nor it makes a difference if i have to external monitors connected. short before the computer crashes the cursor will trasnform from a pointer to the thing you can see on the attached image. cursor will be still functional. up to 60 seco nds later the computer crashes showing a disturbed view on the monitor. you can't see the original content of the monitor anymore. not shure if it helps preventing from crashing moving the mouse from left to right monitor and clicking right mouse button. sometimes the cursor recovers..
http://wahllokal.es/cursor.jpg

I have the same problem on my T60P! I am not having heat issues; I believe that the issue is that Lenovo has not released a Win7 x64 driver for the video card. I have an ATI Mobility FireGL V5250, and the latest driver that windows can find is from 12/1/2008. Lenovo has no driver for Win7 in their matrix, and the Vista driver will not work. I have all other updates installed from Lenovo, and am running BIOS ver. 2.25
Lenovo, PLEASE request an updated driver from ATI for these computers!
ATI has the drivers written, it is just up to Lenovo to request the driver be compiled for our computers! I run an external monitor via DVI-D at 1900x1200 resolution, and this causes the computer to crash at least 4-5 times per day. Sometimes I get a BSOD, sometimes it locks up, sometimes it just goes black. If I don't have an external display connected, I never have any issues.
Lenovo, please support us!

HT3131 Is there a way to use 2 external monitors with the MacBook Pro in closed clamshell mode?

My internal display on my MBP is having issues and occasionally displays white lines all over the screen. The current external monitor displays properly. Is there a way to use two extrernal monitors intead of one external + the internal display?
==========
Model Name:          MacBook Pro (17-inch, Early 2009)
Model Identifier:          MacBookPro5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.93 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          6 MB
Memory:          8 GB
Bus Speed:          1.07 GHz
NVIDIA GeForce 9400M:
Chipset Model:          NVIDIA GeForce 9400M
Type:          GPU
Bus:          PCI
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0863
Revision ID:          0x00b1
ROM Revision:          3436
gMux Version:          1.7.10
NVIDIA GeForce 9600M GT:
Chipset Model:          NVIDIA GeForce 9600M GT
Type:          GPU
Bus:          PCIe
PCIe Lane Width:          x16
VRAM (Total):          512 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0647
Revision ID:          0x00a1
ROM Revision:          3436
gMux Version:          1.7.10
Displays:
Color LCD:
Display Type:          LCD
Resolution:          1920 x 1200
Pixel Depth:          32-Bit Color (ARGB8888)
Main Display:          Yes
Mirror:          Off
Online:          Yes
Built-In:          Yes
Cinema HD:
Display Type:          LCD
Resolution:          1920 x 1200
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          *************
Mirror:          Off
Online:          Yes
Rotation:          Supported

Hi Mike, this isn't the first such problem report I've seen, perhaps another option...
http://eshop.macsales.com/item/Newer%20Technology/VIDU2DVIA/

Dual monitor (w/laptop): external monitor is blank.

Hi! just installed arch for the first time a day ago. Right now what I'm working on is on getting my second monitor running (mostly for development purposes... and movies ^__^).
I'm using Arch64 with the open ATI driver and KDE. Whenever I connect the external monitor, the monitor seems to detect a connection occurred (the "check video cable" message disappears when I connect it and comes back when I disconnect it), and so does KDE. When I open my display settings, it tells me a new monitor was connected and asks me if I want to configure it.
Then I choose to configure and use the two monitors giving the following screens (right now I'm at college testing with monitors in there, thus the low resolution, but behavior seems to be exactly the same):
(EDIT: resized. In case of wishing to read full images, just take the "resized/" out of the URI)
However pretty the full screenshot looks like (... I just mean that even if it looks like the second monitor is working), the monitor remains blank.
Using arandr (xrandr's gui), it is exactly the same result. I might be doing something wrong (almost certainly I am ) (EDIT: decided it was a good idea to show what I did with xrandr).
In /home/<myuser>/.xinitrc my file looks like this:
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
xrandr --output VGA-0 --mode 1440x900 --pos 1600x0 --rotate normal --output LVDS --mode 1600x900 --pos 0x0 --rotate normal --output HDMI-0 --off
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
exec ck-launch-session startkde
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
The laptop's model is Toshiba Satellite L775d. I'm not sure what other information should be required in this situation, but I will be loving to give anything that isn't compromising
Thank you!
(PS: so far Arch has treated me nicely let's see for how long)
Last edited by Mamsaac (2012-03-16 12:24:27)

Thank you for your response!
# xrandr
Screen 0: minimum 320 x 200, current 3040 x 900, maximum 8192 x 8192
VGA-0 connected 1440x900+1600+0 (normal left inverted right x axis y axis) 410mm x 256mm
1440x900 59.9*+
1280x1024 75.0 60.0
1280x960 60.0
1152x864 75.0
1024x768 75.1 60.0
832x624 74.6
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
LVDS connected 1600x900+0+0 (normal left inverted right x axis y axis) 382mm x 214mm
1600x900 60.1*+
1440x900 59.9
1280x854 59.9
1280x800 59.8
1280x720 59.9
1152x768 59.8
1024x768 59.9
800x600 59.9
848x480 59.7
720x480 59.7
640x480 59.4
I wondered the same. I initially only used KDE for it (that's how it worked in other distros, but I'm guessing Fedora and Kubuntu have way more stuff on top). I moved to xrandr later after searching for options and I did select "Ignore" when KDE asked me to configure and just went ahead with xrandr. The same still happens.
Thanks, I hope I gave the right information.
EDIT: Adding some extra information. I tried rebooting with the CRT cable connected. When the kernel initiated its loading, the messages only appeared on the external monitor. It was afterwards (it was pretty quick, but I will assume it was when radeon's modeset hit) that the external monitor went blank again and, in that situation, the laptop's monitor went blank (so none of the two monitors worked... and I was so hopeful!)
Last edited by Mamsaac (2012-03-16 12:14:51)

External Monitor no longer working after install of 10.4.3

Hi:
I am having some major issues after the last update with my external monitor, Dell 1905FP. I have a PowerBook G4 15in, 1.5 processor. Prior to the update I had no issues utlizing the monitor while closing the clamshell but after the update I was unable to utilize the rotation to portrait view on my monitor, with the clamshell closed. It would work on standard view to close the clamshell and then wake the computer utilizing a USB device or bluetooth keyboard.
I decided to after repairing permissions, disk utility, utilizing a DVI and the Analog cord with adaptor, creating a test user account, resetting PRAM and NVRAM and such to try reapplying the combo updater. This further broke the problem as I was unable to close the clamshell and wake the computer up to utilize the external monitor, even in standard (landscape view). When I do close the clamshell with the external monitor hooked up and then wake the computer with my mouse or keyboard the external monitor does power on and shows a lot of static and such not allowing me to see my desktop, but I can see the mouse cursor.
The external monitor works just fine, so long as I leave the lid open and if it goes to sleep with the clamshell open, it wakes just fine and the monitor works. This problem only occurs when I close the clamshell. I prefer the clamshell closed because it gives me the full screen that I desire in portrait mode due to the great amount of writing I do (it allows me to see a full 1 1/2 pages of text in Word while writing).
Another monkey wrench is that I was able to use another monitor, a 17in CRT and it worked just fine, I could close the clamshell and wake the computer utilizing my mouse as I have always been able to. However, I do not believe the Dell monitor is broken, given it will work with a PC laptop perfectly.
Does anyone have a clue on what this issue could be and a possible fix. I have used my Mac exclusively for a little over a year and I am just learning how to troubleshoot this. My thoughts would be to throw away the preferences in the system and then try hooking up the monitor again (as if it were a new monitor)but I have no idea what preferences to throw away.
Any help is appreciated!
Michelle

I answered this question on my own. I was able to utilize Pacifist and reinstalling the video card drivers and display profiles. Now everything works as it should.

Can I use an external monitor in portrait mode?

I do not yet own a Mac, but I am doing up-front research to know what to expect.
I currently have a Samsung 204T LCD monitor (DVI) which allows rotating the display into portrait mode.
I know that OS X supports using an external monitor to extend or mirror the desktop. Can an external monitor be configured for operating in portrait mode? I would expect that this requires the video driver to rotate the display before sending it to the monitor.

I will leave this answer to my original question.
I called Apple and was completely disappointed with their answer. They indicated that they would not answer such a question, since they deemed it to be "outside of the scope of Apple support" since my question was deemed "not a consumer-oriented
question."
So yesterday, I took my Samsung SyncMaster 204T monitor to the local Apple retailer to try it out on an actual system. I specifically tried it out on the 24" iMac with the nVidia 7300GT graphics card, since that is the system I was interested in.
It turned out that this monitor works beautifully in portrait mode with the above system using Tiger 10.4.8.
So, I went and bought it!!

[solved] ThinkPad connect with extern Monitor Problem

Hello community
I have installed arch on my T420 integrated HD 3000 and i have the Problem that when i start arch and the boot messages comes i can see the deamon starts ok,ok,ok who should be on the right side but on the NEC they was displayed 5 cm inside. Also when iam on the console and i type dmesg all the output scroll down and broke 5 cm from the roof. And when iam on openbox and i will maximize one window it would be maximized on the size from the Laptop LCD.
I have made an .xinitrc
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
#xrandr --output DP2 --auto --output LVDS --right-of LVDS
#xrandr --output DP1 --auto --output LVDS --auto --same-as DP1
xrandr -d DP2 -s 1900x1200
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# exec gnome-session
# exec startkde
# exec startxfce4
and here is my Xorg.0.log
[ 81.298]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 81.298] X Protocol Version 11, Revision 0
[ 81.298] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 81.298] Current Operating System: Linux bullitt 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012 x86_64
[ 81.298] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7b8780ba-278c-4d61-a1ec-ba2a6f96c6ba ro quiet
[ 81.299] Build Date: 27 August 2012 08:04:39AM
[ 81.299]
[ 81.299] Current version of pixman: 0.26.2
[ 81.299] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 81.299] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 81.306] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 7 16:33:34 2012
[ 81.307] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 81.308] (==) No Layout section. Using the first Screen section.
[ 81.308] (==) No screen section available. Using defaults.
[ 81.308] (**) |-->Screen "Default Screen Section" (0)
[ 81.308] (**) | |-->Monitor "<default monitor>"
[ 81.308] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 81.308] (==) Automatically adding devices
[ 81.308] (==) Automatically enabling devices
[ 81.308] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 81.308] Entry deleted from font path.
[ 81.308] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 81.308] Entry deleted from font path.
[ 81.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 81.308] Entry deleted from font path.
[ 81.308] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 81.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 81.308] Entry deleted from font path.
[ 81.308] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 81.308] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 81.308] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 81.308] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 81.308] (II) Loader magic: 0x7c8b00
[ 81.308] (II) Module ABI versions:
[ 81.308] X.Org ANSI C Emulation: 0.4
[ 81.308] X.Org Video Driver: 12.1
[ 81.308] X.Org XInput driver : 16.0
[ 81.308] X.Org Server Extension : 6.0
[ 81.308] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21ce rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[ 81.308] (II) Open ACPI successful (/var/run/acpid.socket)
[ 81.308] (II) LoadModule: "extmod"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 81.309] (II) Module extmod: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.0.0
[ 81.309] Module class: X.Org Server Extension
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension MIT-SCREEN-SAVER
[ 81.309] (II) Loading extension XFree86-VidModeExtension
[ 81.309] (II) Loading extension XFree86-DGA
[ 81.309] (II) Loading extension DPMS
[ 81.309] (II) Loading extension XVideo
[ 81.309] (II) Loading extension XVideo-MotionCompensation
[ 81.309] (II) Loading extension X-Resource
[ 81.309] (II) LoadModule: "dbe"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 81.309] (II) Module dbe: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.0.0
[ 81.309] Module class: X.Org Server Extension
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension DOUBLE-BUFFER
[ 81.309] (II) LoadModule: "glx"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 81.309] (II) Module glx: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.0.0
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (==) AIGLX enabled
[ 81.309] (II) Loading extension GLX
[ 81.309] (II) LoadModule: "record"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 81.309] (II) Module record: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.13.0
[ 81.309] Module class: X.Org Server Extension
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension RECORD
[ 81.309] (II) LoadModule: "dri"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 81.309] (II) Module dri: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.0.0
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension XFree86-DRI
[ 81.309] (II) LoadModule: "dri2"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 81.309] (II) Module dri2: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.2.0
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension DRI2
[ 81.309] (==) Matched intel as autoconfigured driver 0
[ 81.309] (==) Matched vesa as autoconfigured driver 1
[ 81.309] (==) Matched fbdev as autoconfigured driver 2
[ 81.309] (==) Assigned the driver to the xf86ConfigLayout
[ 81.309] (II) LoadModule: "intel"
[ 81.310] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 81.310] (II) Module intel: vendor="X.Org Foundation"
[ 81.310] compiled for 1.12.4, module version = 2.20.9
[ 81.310] Module class: X.Org Video Driver
[ 81.310] ABI class: X.Org Video Driver, version 12.1
[ 81.310] (II) LoadModule: "vesa"
[ 81.310] (WW) Warning, couldn't open module vesa
[ 81.310] (II) UnloadModule: "vesa"
[ 81.310] (II) Unloading vesa
[ 81.310] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 81.310] (II) LoadModule: "fbdev"
[ 81.310] (WW) Warning, couldn't open module fbdev
[ 81.310] (II) UnloadModule: "fbdev"
[ 81.310] (II) Unloading fbdev
[ 81.310] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 81.310] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 81.310] (--) using VT number 7
[ 81.313] drmOpenDevice: node name is /dev/dri/card0
[ 81.314] drmOpenDevice: open result is 8, (OK)
[ 81.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 81.314] drmOpenDevice: node name is /dev/dri/card0
[ 81.314] drmOpenDevice: open result is 8, (OK)
[ 81.314] drmOpenByBusid: drmOpenMinor returns 8
[ 81.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 81.314] drmOpenDevice: node name is /dev/dri/card0
[ 81.314] drmOpenDevice: open result is 9, (OK)
[ 81.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 81.314] drmOpenDevice: node name is /dev/dri/card0
[ 81.314] drmOpenDevice: open result is 9, (OK)
[ 81.314] drmOpenByBusid: drmOpenMinor returns 9
[ 81.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 81.314] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 81.314] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 81.314] (==) intel(0): RGB weight 888
[ 81.314] (==) intel(0): Default visual is TrueColor
[ 81.314] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 81.314] (**) intel(0): Relaxed fencing enabled
[ 81.314] (**) intel(0): Wait on SwapBuffers? enabled
[ 81.314] (**) intel(0): Triple buffering? enabled
[ 81.314] (**) intel(0): Framebuffer tiled
[ 81.315] (**) intel(0): Pixmaps tiled
[ 81.315] (**) intel(0): 3D buffers tiled
[ 81.315] (**) intel(0): SwapBuffers wait enabled
[ 81.315] (==) intel(0): video overlay key set to 0x101fe
[ 81.315] (II) intel(0): Output LVDS1 has no monitor section
[ 81.315] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 81.315] (II) intel(0): Output VGA1 has no monitor section
[ 81.340] (II) intel(0): Output HDMI1 has no monitor section
[ 81.380] (II) intel(0): Output DP1 has no monitor section
[ 81.393] (II) intel(0): Output HDMI2 has no monitor section
[ 81.406] (II) intel(0): Output HDMI3 has no monitor section
[ 81.464] (II) intel(0): Output DP2 has no monitor section
[ 81.506] (II) intel(0): Output DP3 has no monitor section
[ 81.507] (II) intel(0): EDID for output LVDS1
[ 81.507] (II) intel(0): Manufacturer: AUO Model: 213e Serial#: 0
[ 81.507] (II) intel(0): Year: 2010 Week: 33
[ 81.507] (II) intel(0): EDID Version: 1.4
[ 81.507] (II) intel(0): Digital Display Input
[ 81.507] (II) intel(0): 6 bits per channel
[ 81.507] (II) intel(0): Digital interface is undefined
[ 81.507] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 81.507] (II) intel(0): Gamma: 2.20
[ 81.507] (II) intel(0): No DPMS capabilities specified
[ 81.507] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 81.507] (II) intel(0): First detailed timing is preferred mode
[ 81.507] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 81.507] (II) intel(0): redX: 0.610 redY: 0.350 greenX: 0.320 greenY: 0.560
[ 81.507] (II) intel(0): blueX: 0.150 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
[ 81.507] (II) intel(0): Manufacturer's mask: 0
[ 81.507] (II) intel(0): Supported detailed timing:
[ 81.507] (II) intel(0): clock: 110.0 MHz Image Size: 309 x 174 mm
[ 81.507] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0
[ 81.507] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
[ 81.507] (II) intel(0): Supported detailed timing:
[ 81.507] (II) intel(0): clock: 73.3 MHz Image Size: 309 x 174 mm
[ 81.507] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0
[ 81.507] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
[ 81.507] (II) intel(0): AUO
[ 81.507] (II) intel(0): B140RW02 V1
[ 81.507] (II) intel(0): EDID (in hex):
[ 81.507] (II) intel(0): 00ffffffffffff0006af3e2100000000
[ 81.507] (II) intel(0): 21140104901f11780261959c59528f26
[ 81.507] (II) intel(0): 21505400000001010101010101010101
[ 81.507] (II) intel(0): 010101010101f82a409a61840c30402a
[ 81.507] (II) intel(0): 330035ae10000018a51c409a61840c30
[ 81.507] (II) intel(0): 402a330035ae10000018000000fe0041
[ 81.507] (II) intel(0): 554f0a202020202020202020000000fe
[ 81.507] (II) intel(0): 004231343052573032205631200a00d0
[ 81.507] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 81.507] (II) intel(0): Printing DDC gathered Modelines:
[ 81.508] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 81.508] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 81.508] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 81.508] (II) intel(0): Printing probed modes for output LVDS1
[ 81.508] (II) intel(0): Modeline "1600x900"x60.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 81.508] (II) intel(0): Modeline "1600x900"x40.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 81.508] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 81.508] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 81.508] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 81.508] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 81.508] (II) intel(0): EDID for output VGA1
[ 81.533] (II) intel(0): EDID for output HDMI1
[ 81.573] (II) intel(0): EDID for output DP1
[ 81.586] (II) intel(0): EDID for output HDMI2
[ 81.600] (II) intel(0): EDID for output HDMI3
[ 81.657] (II) intel(0): EDID for output DP2
[ 81.657] (II) intel(0): Manufacturer: NEC Model: 67d1 Serial#: 0
[ 81.657] (II) intel(0): Year: 2011 Week: 33
[ 81.657] (II) intel(0): EDID Version: 1.4
[ 81.657] (II) intel(0): Digital Display Input
[ 81.657] (II) intel(0): 10 bits per channel
[ 81.657] (II) intel(0): Digital interface is DisplayPort
[ 81.657] (II) intel(0): Max Image Size [cm]: horiz.: 52 vert.: 32
[ 81.657] (II) intel(0): Gamma: 2.20
[ 81.657] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 81.657] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 81.657] (II) intel(0): First detailed timing is preferred mode
[ 81.657] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 81.657] (II) intel(0): redX: 0.679 redY: 0.310 greenX: 0.210 greenY: 0.686
[ 81.657] (II) intel(0): blueX: 0.149 blueY: 0.047 whiteX: 0.313 whiteY: 0.329
[ 81.657] (II) intel(0): Supported established timings:
[ 81.657] (II) intel(0): 720x400@70Hz
[ 81.657] (II) intel(0): 640x480@60Hz
[ 81.657] (II) intel(0): 640x480@67Hz
[ 81.657] (II) intel(0): 640x480@72Hz
[ 81.657] (II) intel(0): 640x480@75Hz
[ 81.657] (II) intel(0): 800x600@56Hz
[ 81.657] (II) intel(0): 800x600@60Hz
[ 81.657] (II) intel(0): 800x600@72Hz
[ 81.657] (II) intel(0): 800x600@75Hz
[ 81.657] (II) intel(0): 832x624@75Hz
[ 81.657] (II) intel(0): 1024x768@60Hz
[ 81.657] (II) intel(0): 1024x768@70Hz
[ 81.657] (II) intel(0): 1024x768@75Hz
[ 81.657] (II) intel(0): 1280x1024@75Hz
[ 81.657] (II) intel(0): 1152x864@75Hz
[ 81.657] (II) intel(0): Manufacturer's mask: 0
[ 81.657] (II) intel(0): Supported standard timings:
[ 81.657] (II) intel(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 81.657] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 81.657] (II) intel(0): #2: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
[ 81.657] (II) intel(0): #3: hsize: 1360 vsize 765 refresh: 60 vid: 49291
[ 81.657] (II) intel(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 81.657] (II) intel(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 81.657] (II) intel(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 81.657] (II) intel(0): #7: hsize: 1920 vsize 1200 refresh: 60 vid: 209
[ 81.657] (II) intel(0): Supported detailed timing:
[ 81.657] (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm
[ 81.657] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 81.657] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 81.657] (II) intel(0): Ranges: V min: 50 V max: 85 Hz, H min: 31 H max: 92 kHz, PixClock max 165 MHz
[ 81.657] (II) intel(0): Monitor name: PA241W
[ 81.657] (II) intel(0): Serial No: 18107120UB
[ 81.657] (II) intel(0): EDID (in hex):
[ 81.657] (II) intel(0): 00ffffffffffff0038a3d16700000000
[ 81.657] (II) intel(0): 21150104b5342078e2de45ad4f35af26
[ 81.657] (II) intel(0): 0c5054bfef8081c0818090408bc09500
[ 81.657] (II) intel(0): a940b300d100283c80a070b023403020
[ 81.657] (II) intel(0): 360006442100001a000000fd0032551f
[ 81.657] (II) intel(0): 5c10000a202020202020000000fc0050
[ 81.657] (II) intel(0): 41323431570a202020202020000000ff
[ 81.657] (II) intel(0): 00313831303731323055420a2020004b
[ 81.657] (II) intel(0): Printing probed modes for output DP2
[ 81.657] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 81.657] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 81.657] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 81.657] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
[ 81.657] (II) intel(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
[ 81.657] (II) intel(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 81.657] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 81.657] (II) intel(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 81.657] (II) intel(0): Modeline "1440x900"x84.8 157.00 1440 1544 1696 1952 900 903 909 948 -hsync +vsync (80.4 kHz e)
[ 81.657] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 81.657] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 81.657] (II) intel(0): Modeline "1360x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 81.657] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x800"x84.9 122.50 1280 1360 1496 1712 800 803 809 843 -hsync +vsync (71.6 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 81.657] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x768"x84.8 117.50 1280 1360 1496 1712 768 771 778 809 -hsync +vsync (68.6 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 81.658] (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz e)
[ 81.658] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 81.658] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 81.658] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 81.658] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 81.658] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 81.658] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 81.658] (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz e)
[ 81.658] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 81.658] (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz e)
[ 81.658] (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz e)
[ 81.700] (II) intel(0): EDID for output DP3
[ 81.700] (II) intel(0): Output LVDS1 connected
[ 81.700] (II) intel(0): Output VGA1 disconnected
[ 81.700] (II) intel(0): Output HDMI1 disconnected
[ 81.700] (II) intel(0): Output DP1 disconnected
[ 81.700] (II) intel(0): Output HDMI2 disconnected
[ 81.700] (II) intel(0): Output HDMI3 disconnected
[ 81.700] (II) intel(0): Output DP2 connected
[ 81.700] (II) intel(0): Output DP3 disconnected
[ 81.700] (II) intel(0): Using exact sizes for initial modes
[ 81.700] (II) intel(0): Output LVDS1 using initial mode 1600x900
[ 81.700] (II) intel(0): Output DP2 using initial mode 1600x900
[ 81.700] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 81.700] (II) intel(0): Kernel page flipping support detected, enabling
[ 81.700] (**) intel(0): Display dimensions: (310, 170) mm
[ 81.700] (**) intel(0): DPI set to (131, 134)
[ 81.700] (II) Loading sub module "fb"
[ 81.700] (II) LoadModule: "fb"
[ 81.701] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 81.701] (II) Module fb: vendor="X.Org Foundation"
[ 81.701] compiled for 1.12.4, module version = 1.0.0
[ 81.701] ABI class: X.Org ANSI C Emulation, version 0.4
[ 81.701] (II) Loading sub module "dri2"
[ 81.701] (II) LoadModule: "dri2"
[ 81.701] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 81.701] (II) Module dri2: vendor="X.Org Foundation"
[ 81.701] compiled for 1.12.4, module version = 1.2.0
[ 81.701] ABI class: X.Org Server Extension, version 6.0
[ 81.701] (==) Depth 24 pixmap format is 32 bpp
[ 81.702] (II) intel(0): [DRI2] Setup complete
[ 81.702] (II) intel(0): [DRI2] DRI driver: i965
[ 81.702] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
[ 81.704] (II) UXA(0): Driver registered support for the following operations:
[ 81.704] (II) solid
[ 81.704] (II) copy
[ 81.704] (II) composite (RENDER acceleration)
[ 81.704] (II) put_image
[ 81.704] (II) get_image
[ 81.704] (==) intel(0): Backing store disabled
[ 81.704] (==) intel(0): Silken mouse enabled
[ 81.704] (II) intel(0): Initializing HW Cursor
[ 81.704] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 81.707] (==) intel(0): DPMS enabled
[ 81.707] (==) intel(0): Intel XvMC decoder enabled
[ 81.707] (II) intel(0): Set up textured video
[ 81.707] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 81.707] (II) intel(0): direct rendering: DRI2 Enabled
[ 81.707] (==) intel(0): hotplug detection: "enabled"
[ 82.106] (--) RandR disabled
[ 82.107] (II) Initializing built-in extension Generic Event Extension
[ 82.107] (II) Initializing built-in extension SHAPE
[ 82.107] (II) Initializing built-in extension MIT-SHM
[ 82.107] (II) Initializing built-in extension XInputExtension
[ 82.107] (II) Initializing built-in extension XTEST
[ 82.107] (II) Initializing built-in extension BIG-REQUESTS
[ 82.107] (II) Initializing built-in extension SYNC
[ 82.107] (II) Initializing built-in extension XKEYBOARD
[ 82.107] (II) Initializing built-in extension XC-MISC
[ 82.107] (II) Initializing built-in extension SECURITY
[ 82.107] (II) Initializing built-in extension XINERAMA
[ 82.107] (II) Initializing built-in extension XFIXES
[ 82.107] (II) Initializing built-in extension RENDER
[ 82.107] (II) Initializing built-in extension RANDR
[ 82.107] (II) Initializing built-in extension COMPOSITE
[ 82.107] (II) Initializing built-in extension DAMAGE
[ 82.119] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 82.119] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 82.119] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 82.119] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 82.119] (II) AIGLX: Loaded and initialized i965
[ 82.119] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 82.119] (II) intel(0): Setting screen physical size to 423 x 238
[ 82.158] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 82.158] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 82.158] (II) LoadModule: "evdev"
[ 82.159] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 82.159] (II) Module evdev: vendor="X.Org Foundation"
[ 82.159] compiled for 1.12.3.901, module version = 2.7.3
[ 82.159] Module class: X.Org XInput Driver
[ 82.159] ABI class: X.Org XInput driver, version 16.0
[ 82.159] (II) Using input driver 'evdev' for 'Power Button'
[ 82.159] (**) Power Button: always reports core events
[ 82.159] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 82.159] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 82.159] (--) evdev: Power Button: Found keys
[ 82.159] (II) evdev: Power Button: Configuring as keyboard
[ 82.159] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 82.160] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 82.160] (**) Option "xkb_rules" "evdev"
[ 82.160] (**) Option "xkb_model" "evdev"
[ 82.160] (**) Option "xkb_layout" "de"
[ 82.160] (**) Option "xkb_variant" "nodeadkeys"
[ 82.193] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 82.193] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 82.193] (II) Using input driver 'evdev' for 'Video Bus'
[ 82.193] (**) Video Bus: always reports core events
[ 82.193] (**) evdev: Video Bus: Device: "/dev/input/event12"
[ 82.193] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 82.193] (--) evdev: Video Bus: Found keys
[ 82.193] (II) evdev: Video Bus: Configuring as keyboard
[ 82.193] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12/event12"
[ 82.193] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 82.193] (**) Option "xkb_rules" "evdev"
[ 82.193] (**) Option "xkb_model" "evdev"
[ 82.193] (**) Option "xkb_layout" "de"
[ 82.193] (**) Option "xkb_variant" "nodeadkeys"
[ 82.195] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 82.195] (II) No input driver specified, ignoring this device.
[ 82.195] (II) This device may have been added with another device file.
[ 82.195] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 82.195] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 82.195] (II) Using input driver 'evdev' for 'Sleep Button'
[ 82.195] (**) Sleep Button: always reports core events
[ 82.195] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 82.195] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 82.195] (--) evdev: Sleep Button: Found keys
[ 82.195] (II) evdev: Sleep Button: Configuring as keyboard
[ 82.195] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 82.195] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 82.195] (**) Option "xkb_rules" "evdev"
[ 82.196] (**) Option "xkb_model" "evdev"
[ 82.196] (**) Option "xkb_layout" "de"
[ 82.196] (**) Option "xkb_variant" "nodeadkeys"
[ 82.197] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 82.197] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc01e
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 82.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
[ 82.197] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 82.197] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 82.197] (II) No input driver specified, ignoring this device.
[ 82.197] (II) This device may have been added with another device file.
[ 82.197] (II) config/udev: Adding input device Integrated Camera (/dev/input/event10)
[ 82.197] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 82.197] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 82.197] (**) Integrated Camera: always reports core events
[ 82.197] (**) evdev: Integrated Camera: Device: "/dev/input/event10"
[ 82.197] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb221
[ 82.197] (--) evdev: Integrated Camera: Found keys
[ 82.197] (II) evdev: Integrated Camera: Configuring as keyboard
[ 82.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10/event10"
[ 82.197] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
[ 82.197] (**) Option "xkb_rules" "evdev"
[ 82.197] (**) Option "xkb_model" "evdev"
[ 82.197] (**) Option "xkb_layout" "de"
[ 82.197] (**) Option "xkb_variant" "nodeadkeys"
[ 82.198] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event17)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event18)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event19)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event20)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.199] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event5)
[ 82.199] (**) HID 046a:0101: Applying InputClass "evdev keyboard catchall"
[ 82.199] (II) Using input driver 'evdev' for 'HID 046a:0101'
[ 82.199] (**) HID 046a:0101: always reports core events
[ 82.199] (**) evdev: HID 046a:0101: Device: "/dev/input/event5"
[ 82.199] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
[ 82.199] (--) evdev: HID 046a:0101: Found keys
[ 82.199] (II) evdev: HID 046a:0101: Configuring as keyboard
[ 82.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input5/event5"
[ 82.199] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: KEYBOARD, id 11)
[ 82.199] (**) Option "xkb_rules" "evdev"
[ 82.199] (**) Option "xkb_model" "evdev"
[ 82.199] (**) Option "xkb_layout" "de"
[ 82.199] (**) Option "xkb_variant" "nodeadkeys"
[ 82.199] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event7)
[ 82.199] (**) HID 046a:0101: Applying InputClass "evdev keyboard catchall"
[ 82.199] (II) Using input driver 'evdev' for 'HID 046a:0101'
[ 82.199] (**) HID 046a:0101: always reports core events
[ 82.199] (**) evdev: HID 046a:0101: Device: "/dev/input/event7"
[ 82.199] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
[ 82.199] (--) evdev: HID 046a:0101: Found 1 mouse buttons
[ 82.199] (--) evdev: HID 046a:0101: Found scroll wheel(s)
[ 82.199] (--) evdev: HID 046a:0101: Found relative axes
[ 82.199] (II) evdev: HID 046a:0101: Forcing relative x/y axes to exist.
[ 82.199] (--) evdev: HID 046a:0101: Found absolute axes
[ 82.199] (II) evdev: HID 046a:0101: Forcing absolute x/y axes to exist.
[ 82.199] (--) evdev: HID 046a:0101: Found keys
[ 82.199] (II) evdev: HID 046a:0101: Configuring as mouse
[ 82.199] (II) evdev: HID 046a:0101: Configuring as keyboard
[ 82.199] (II) evdev: HID 046a:0101: Adding scrollwheel support
[ 82.199] (**) evdev: HID 046a:0101: YAxisMapping: buttons 4 and 5
[ 82.199] (**) evdev: HID 046a:0101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 82.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input7/event7"
[ 82.199] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: KEYBOARD, id 12)
[ 82.199] (**) Option "xkb_rules" "evdev"
[ 82.199] (**) Option "xkb_model" "evdev"
[ 82.199] (**) Option "xkb_layout" "de"
[ 82.199] (**) Option "xkb_variant" "nodeadkeys"
[ 82.199] (II) evdev: HID 046a:0101: initialized for relative axes.
[ 82.199] (WW) evdev: HID 046a:0101: ignoring absolute axes.
[ 82.199] (**) HID 046a:0101: (accel) keeping acceleration scheme 1
[ 82.199] (**) HID 046a:0101: (accel) acceleration profile 0
[ 82.199] (**) HID 046a:0101: (accel) acceleration factor: 2.000
[ 82.199] (**) HID 046a:0101: (accel) acceleration threshold: 4
[ 82.200] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event8)
[ 82.200] (**) HID 046a:0101: Applying InputClass "evdev pointer catchall"
[ 82.200] (II) Using input driver 'evdev' for 'HID 046a:0101'
[ 82.200] (**) HID 046a:0101: always reports core events
[ 82.200] (**) evdev: HID 046a:0101: Device: "/dev/input/event8"
[ 82.200] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
[ 82.200] (--) evdev: HID 046a:0101: Found 9 mouse buttons
[ 82.200] (--) evdev: HID 046a:0101: Found scroll wheel(s)
[ 82.200] (--) evdev: HID 046a:0101: Found relative axes
[ 82.200] (--) evdev: HID 046a:0101: Found x and y relative axes
[ 82.200] (II) evdev: HID 046a:0101: Configuring as mouse
[ 82.200] (II) evdev: HID 046a:0101: Adding scrollwheel support
[ 82.200] (**) evdev: HID 046a:0101: YAxisMapping: buttons 4 and 5
[ 82.200] (**) evdev: HID 046a:0101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 82.200] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/input/input8/event8"
[ 82.200] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: MOUSE, id 13)
[ 82.200] (II) evdev: HID 046a:0101: initialized for relative axes.
[ 82.200] (**) HID 046a:0101: (accel) keeping acceleration scheme 1
[ 82.200] (**) HID 046a:0101: (accel) acceleration profile 0
[ 82.200] (**) HID 046a:0101: (accel) acceleration factor: 2.000
[ 82.200] (**) HID 046a:0101: (accel) acceleration threshold: 4
[ 82.200] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/mouse1)
[ 82.200] (II) No input driver specified, ignoring this device.
[ 82.200] (II) This device may have been added with another device file.
[ 82.200] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 82.200] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 82.200] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 82.200] (**) AT Translated Set 2 keyboard: always reports core events
[ 82.200] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 82.200] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 82.200] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 82.200] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 82.200] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 82.200] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 82.200] (**) Option "xkb_rules" "evdev"
[ 82.200] (**) Option "xkb_model" "evdev"
[ 82.200] (**) Option "xkb_layout" "de"
[ 82.200] (**) Option "xkb_variant" "nodeadkeys"
[ 82.201] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 82.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 82.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 82.201] (II) LoadModule: "synaptics"
[ 82.201] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 82.201] (II) Module synaptics: vendor="X.Org Foundation"
[ 82.201] compiled for 1.12.2, module version = 1.6.2
[ 82.201] Module class: X.Org XInput Driver
[ 82.201] ABI class: X.Org XInput driver, version 16.0
[ 82.201] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 82.201] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 82.201] (**) Option "Device" "/dev/input/event11"
[ 82.203] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 82.203] (**) Option "TapButton1" "1"
[ 82.203] (**) Option "TapButton2" "2"
[ 82.203] (**) Option "TapButton3" "3"
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 82.203] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 82.204] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 82.204] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 82.204] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 82.204] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[ 82.204] (II) No input driver specified, ignoring this device.
[ 82.204] (II) This device may have been added with another device file.
[ 82.204] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event21)
[ 82.204] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 82.204] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 82.204] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event21"
[ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 82.204] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 82.204] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input21/event21"
[ 82.204] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 16)
[ 82.205] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 82.205] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
[ 82.205] (II) No input driver specified, ignoring this device.
[ 82.205] (II) This device may have been added with another device file.
[ 82.205] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 82.205] (II) No input driver specified, ignoring this device.
[ 82.205] (II) This device may have been added with another device file.
[ 82.205] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event9)
[ 82.205] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 82.205] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 82.205] (**) ThinkPad Extra Buttons: always reports core events
[ 82.205] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event9"
[ 82.205] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 82.205] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 82.205] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 82.205] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input9/event9"
[ 82.205] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 17)
[ 82.205] (**) Option "xkb_rules" "evdev"
[ 82.205] (**) Option "xkb_model" "evdev"
[ 82.205] (**) Option "xkb_layout" "de"
[ 82.205] (**) Option "xkb_variant" "nodeadkeys"
[ 82.222] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 82.222] (II) intel(0): Printing DDC gathered Modelines:
[ 82.222] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 82.222] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 82.415] (II) intel(0): Allocated new frame buffer 1920x1200 stride 7680, tiled
[ 106.807] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 117.740] (II) Open ACPI successful (/var/run/acpid.socket)
[ 117.740] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 117.767] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 117.767] (II) intel(0): Printing DDC gathered Modelines:
[ 117.767] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 117.767] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 117.959] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
I have connect my ThinkPad per Dockingstation Displayport (I try also DVI) with an NEC PA241W. It seems arch takes the 1600x900 resolution from the Laptop :-(
I dont know what to do makes the Kernel the Problem?
On my second PC i have there an Nvidia when i start arch for install all are perfect on my NEC i connected it with DVI
here is my xrandr
[frank@bullitt ~]$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 8192 x 8192
LVDS1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
1600x900 60.0*+ 40.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
1920x1200 60.0*+
1600x1200 60.0
1680x1050 60.0
1680x945 60.0
1400x1050 74.9 60.0
1600x900 60.0
1280x1024 85.0 75.0 60.0
1440x900 84.8 75.0 59.9
1280x960 85.0 60.0
1360x768 59.8 60.0
1280x800 84.9 74.9 59.8
1152x864 75.0
1280x768 84.8 74.9 59.9
1280x720 60.0
1024x768 85.0 75.1 70.1 60.0
1024x576 60.0
832x624 74.6
800x600 85.1 72.2 75.0 60.3 56.2
848x480 60.0
640x480 85.0 72.8 75.0 66.7 60.0
720x400 85.0 70.1
640x400 85.1
640x350 85.1
DP3 disconnected (normal left inverted right x axis y axis)
Does anybody have the same kind of connected an Laptop with an external Monitor and knows what was the Problem?
I like arch very much but so it doesnt make fun :-(
I hope someone can help me
the picture shows openbox with the Thunar maximized
Last edited by kerasi (2012-10-12 23:12:12)

@trilby
i use my Laptop at home 95% and at work 5%
so my first choice would be to have the perfect resolution on my NEC external and when i opened a window it would display there and i dont have to open my Laptop to move the screen to see it on my external or is it so that you must have opened the laptop display to move the windows?
And when i would take it at work it would be perfect if i see it on the laptop with his resolution 1600x900
i hope i explained it well.
@anoknusa
i change your config to this
xrandr --output LVDS1 --mode 1600x900 --pos 0x900 --rotate normal --output DP2 --mode 1920x1200 --pos 0x0 --rotate normal
when i start firefox it was displayes well on my external but when i opened xterm or thunar pcman i have to open my laptop and move from it up to the external do i make a mistake?
anoknusa wrote:I stuck that in a script to run when I start X; if the external monitor isn't plugged in, only the laptop display is used. This sets each screen to act as a seperate display; I can still drag windows between them if I wish, as well as assign windows to open on one screen or the other through DWM's configuration file. As mentioned earlier, this is also the only way (I think) to get each screen to display at its native resolution. Note that I specify the resolution for both my T520 LCD and my external monitor, and specify their positions (my external is mounted to the wall above my desk, directly above my laptop); change those as necessary.
what has xrandr to look like for my external monitor and laptop?
and what would the script look like for me?
external 1920x1200
T420 1600x900
and thank you for your patience and have a nice day
ps: i know iam very close to find a solution for my problem
Last edited by kerasi (2012-10-11 00:05:55)

External monitor stopped working after 10.6.7 update

I have a MacBook Pro, model identifier MacBookPro6,2 with an NVIDIA GeForce GT 330M.
When I updated last night from 10.6.6 to 10.6.7 I stopped being able to use my Dell S2409W external monitor.
I have tried resetting the pram, resetting the SMC, booting with extensions off.
When I plug in the cable to the external monitor the Mac screen goes blue for about 0.5 second and re-appears but nothing displays on the external monitor; a second monitor is not listed in the Display preferences and the monitor reports that it is not receiving a signal.
I don't see anything in the system.log when I plug or unplug the monitor cable (I'm not sure if I should).
At random intervals while the external monitor cable is plugged in the screen goes blue for a half second and then re-appears.
The screen does not go blue if I wiggle or flex the monitor cable.

I see this in the windowserver.log after reboot, login with shift-key, and the external monitor connected.
There might be a clue here but I don't have anything to compare it to since I haven't collected these data when the external monitor was working.
I'd be curious to see the same data from the windowserver.log for somebody else with a MacBook Pro with an external monitor connected that does work.
You can view this log with the console application located: /Applications/Utilities/console.
If you are willing to share these data please reboot, and hold the shift-key down when logging in to disable extensions (thanks). If you look at the time just when the desktop appears when you end up looking at the windowserver.log you'll be able to see the windowserver starting up about 10 seconds prior to this time.
Mar 22 21:31:26 [110] Server is starting up
Mar 22 21:31:27 [110] CGXMappedDisplayStart: Display0 : boot screen
Mar 22 21:31:27 [110] CGXMappedDisplayStart: Display0 : display alias 0x0 valid
Mar 22 21:31:27 [110] CGXMappedDisplayStart: Display1 : no display alias property
Mar 22 21:31:27 [110] CGXMappedDisplayStart: Display2 : display alias 0x0 valid
Mar 22 21:31:27 [110] MPFinalizeInitialization: Display 0x3f003e unit 2 alias mask 0x5
Mar 22 21:31:27 [110] MPFinalizeInitialization: Display 0x4272dc0 unit 0 alias mask 0x5
Mar 22 21:31:27 [110] GLCompositor: GL renderer id 0x01022612, GL mask 0x00000003, accelerator 0x00003137, unit 0, caps 0x00000003, vram 512 MB
Mar 22 21:31:27 [110] GLCompositor: GL renderer id 0x01022612, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192} extensions 0x0000000f
Mar 22 21:31:27 [110] GLCompositor: GL renderer id 0x01024300, GL mask 0x00000004, accelerator 0x00003c0b, unit 2, caps 0x00000003, vram 288 MB
Mar 22 21:31:27 [110] GLCompositor: GL renderer id 0x01024300, GL mask 0x00000004, texture units 8, texture max 8192, viewport max {8192, 8192} extensions 0x0000000f
Mar 22 21:31:27 [110] agc_attach: gMux mode is dynamic
Mar 22 21:31:28 [110] CGXPerformInitialDisplayConfiguration
Mar 22 21:31:28 [110] Display 0x4272dc0: MappedDisplay Unit 0; Vendor 0x610 Model 0x9cb7 S/N 0; online enabled built-in (0,0)[1680 x 1050], Rotation 0, base addr 0x102a00000
Mar 22 21:31:28 [110] Display 0x4272dc2: MappedDisplay Unit 2; Vendor 0x610 Model 0x9cb7 S/N 0; offline enabled built-in (2704,0)[1 x 1], Rotation 0, base addr 0x113800000
Mar 22 21:31:28 [110] Display 0x3f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1; offline enabled (2705,0)[1 x 1], Rotation 0, base addr 0x102a00000
Mar 22 21:31:28 [110] Display 0x4272dc0: MappedDisplay Unit 0; ColorProfile "Color LCD" (MD5 a23cb9c96f2fd096b7a058db0d319259)
Mar 22 21:31:28 [110] kCGErrorIllegalArgument: CGXSetWindowListTags: Operation on a window 0x2 not owned by caller (PID 202)
Mar 22 21:31:35 [110] kCGErrorIllegalArgument: CGXSetWindowListTags: Operation on a window 0x2 not owned by caller (PID 206)

Resolution 1920x1080 not available for an external monitor

Hi,
I've just bought a Tv Lcd + Monitor 24 Samsung P2470hn, I have a DisplayPort to DVI adapter and a DVI to HDMI cable to the monitor. But when a I go to System Preferences -> Displays, I only have resolutions up to 1600x900. The monitor supports 1920x1080 but it isn't available. What I'm doing wrong? Could it be the DVI to HDMI cable? The monitor has a DVI input.
One weird thing is that when I go to System Profiler -> Graphics/Displays I see that the external monitor has this
SyncMaster:
Resolution: 1600 x 900 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Television: Yes
Note the last item "Television: Yes" could be that the problem? if so how can I change it?
Thanks
Gabriel

I find it very annoying that I have to use MiniDisplay Port to VGA to get 1366x768 or 1920x1080 resolution options in the Display Control Pane. If I use MiniDisplay Port to HDMI, I get some old common resolutions, (some weird ones too like 1344x1024) as well as 720p, 1080i, and 1080p. 1080p would be great, except this is more of a "TV" video input rather than a "PC" monitor input, I either get overscan or underscan (depending on the "Overscan" check box).
Why, especially since it's all digital with HDMI, doesn't Apple include nice 1:1 Pixel mapping using HDMI? It's very frustrating! I've noticed some, (generally more expensive HDTVs, like my 63" Samsung Plasma), HDTVs will do "Just Scan" (as opposed to "OverScan" or "UnderScan") then the 1080p with HDMI works beautifully.
All of my VIZIO TVs, I have to use the VGA to get 1:1 Pixel mapping. At least, with a high quality VGA cable (even my 25 foot one from MonoPrice.com that would cost 10 times more at a local store) does convert back to digital (for LCD panel) without noticeable noise and pixel shifting (or ghosting, which I've seen with cheap VGA cables, weird, seeing analog distortions on a digital LCD display, but hey, bad analog in -bad analog looking image out). Plus, unless you have the newest Macs with audio supported through the MiniDisplay Port, you can only get the TV speakers to work with the "PC" VGA input and the "PC" audio input (3.5mm stereo phono jack) next to it. With an HDMI input, the TV will look for audio in the HDMI source and not from the "PC" audio input.

MacBook Air w/ 4 External Monitors

I have a MacBook Air with 4 External Monitors:
Dell UltraSharp 30"
2 x Dell UltraSharp 20" - Rotated 90 degrees
Samsung Sync Master Commercial Display 55" Mounted on the Wall
This is the main monitor setup w/o the Samsung:
http://www.digitaltigers.com/ultraflex-powertrio30.asp
The 30" is connect to the air using a MiniDP to DP connector and the other monitors are using Sewell DisplayLink USB to DVI connectors:
http://sewelldirect.com/Sewell-Minideck-USB-to-DVI-Display-Adapter.asp
Everything seems to be working smoothly EXCEPT there are times when I bring the MacBook Air to the office and connect it and all the display settings do not seem to be saved. The arrangement and monitor rotation is not the way it was when I left. I have even tired shutting the computer down, restarting it correcting the configuration and then saving and restarting again. When it boots back up the rotation is correct (somtimes) but other settings such as arrangement or background may not be correct.
Any thoughts?
I love the Air and I would hate to go back to my ThinkPad but if this won't work then I will need to.

Quick update, I downloaded the mostt recent drivers for the Sewell adapter and that seemed to work. Which is strange because I thought i had done this previously.
None the less it looks like we are good to go now.

External monitor simply not working - including with external dock (dual screen)

I can't get the external monitor (aka dual screen) to work on my T60 via the VGA port. My model is currently running Windows XP and has a ATI Radeon X1300 video card.
I'm 6 months out of warantee (although this problem started while in warantee but I can't convince Lenovo of that).
I've tried the following:
- ensuring "extend my monitor onto this desktop" in windows display properties
- disabling/enabling Presentation Director and trying all the schemes
- setting all different combinations of modes for resolution/colour on both (LCD + VGA) monitor
- trying two different monitors and cables (which did work with other computers)
- Updating the video drivers (from the Lenovo website) and Presentation Director to the latest versions
I then figured it might be a hardware fault, so I tried to see if the external monitor was activated on bootup. I made sure the "LCD + VGA" option on boot was selected in BIOS. Still no joy.
Finally, I figured the actual VGA connector was broken so I bought a compatible mini docking station (port replicator) and attached the VGA cable to that and even that didn't work.
What on earth could be wrong if it's not the software and not the VGA connector? The video card is working as its powering the LCD display?
Is my only option to give it in to repair (I can't afford that)?
Michael
Message Edited by mstrom on 07-03-2008 04:03 AM

T23FUN wrote:
Hi,
Does the external connections and cables work with another system. I'd do that first.
If all of it works with another system then it could be drivers or internal things but try that first.
There are some driver updates on the Lenovo site. Make sure your BIOS are updated and such.
Good Luck,
Yup, checked the cables and monitor with another system (actually with the same laptop using a USB->VGA adaptor which isn't a long-term fix)
Also updated to all the latest driver including a BIOS update (which I forgot to mention).
thanks,
Michael

Rotate external Monitor on T60

Similar Messages

Maybe you are looking for