Rotate print 180 degrees

I am having problems with printing from SAP to an HP laserjet 4350 printer. The HP printer driver has the facility to rotate the page 180 degrees and works fine when printing test pages from the windows print server.
When printing from SAP to the network printer the page does not rotate.
Anyone any ideas as to how to fix this.
Regards..

Hi,
You may need to select the appropriate HP Device Type in SAP.
Go to SPAD --> Select the ouptut device which you are using (Say LP01) --> Check the device type.
Regards,
Firoz.

Similar Messages

When i transfer my photo to pc, they are all rotated for 180 degrees

Well,just like it says. I was trying to backup my photos to my hard disk to free up my phone space. But all photo are rotated for 180 degrees on my pc. It is immposible to watch those on pc. Did i do something wrong?

And why is not possible to import photos to phone in same way like exporting them??
<Edited By Host>

Rotating video 180 degrees?

I have a special need to be able to rotate certain clips within a video 180 degrees. I am mounting a small video camcorder in a mid-power model rocket and will be launching the camcorder to an altitude of approximately 5000'. During the ascent (Phase 1), the video will be oriented correctly. At apogee, the rocket will eject a small drogue parachute to create a rapid but controlled descent (Phase 2) until the altimeter senses roughly 500' altitude at which point, it will eject a large main parachute for a slow descent and soft landing (Phase 3). During Phase 2, the camcorder will be suspended upside down from the drogue parachute.
Is there a method in Adobe Premiere Elements 8.0 (or any other reasonably priced video editing software) that I can rotate the entire clip of Phase 2 (estimated at 30 to 120 seconds) by 180 degrees in order to compensate for the camcorder recording in an upside down orientation during this phase?
Thanks in advance for any help you can provide.

gambak
If you found rotation in your particular version from the information in this 5 year old thread, then please read no further.
If you need rotation in Premiere Elements 8 as did Allan Coleman, then, for the selected clip,
Properties Palette
Motion Panel expanded with the rotation feature found there.
If Premiere Elements 11, 12, or 13, then, for the selected clip
Applied Effect Tab
Applied Effect Palette
Motion Panel expanded with the rotation feature found there.
ATR

Problem with tx2510us 12.1" laptop. Screen is rotating 180 degrees

Hi,
I got a laptop tx2510us 8 months back. Whenever I try to use the keypad the screen is rotating to 180 degrees and keyboard stops working. I'm rotating the screen switching into notebook mode and using the pen to do the activities.
please help!!

pushing "rotate" button does not rotate scrren contents

Label and textfield flipped (180 degree)

i'd like to make an app with a pane divided in 2.
on the bottom part i have button, label, textfield normally displayed,
on the upper part i'll have other button, textfield ecc, rotated of 180 degree.
how can i make it?
thanks

i'm new to interface builder, i'm not able to find where i can change rotation of an object...
but perhaps i have found something following your suggestion:
#define RADIANS(degrees) ((degrees * M_PI) / 180.0)
CGAffineTransform rotateTransform = CGAffineTransformRotate(CGAffineTransformIdentity,
RADIANS(30.0));
myButton.transform = rotateTransform;
there is a way to make it in interface builder?
thanks

CR in vs 2005 (whatever version that it) - rotate a textobject 180 degrees.

I am sure that this horse has been flogged before ... somewhere ... but I have given up endlessly searching for it.
I need to rotate a report (onto a label, in fact) 180 degrees ... sometimes. The labels have a pre-printed footer and, depending on the label manufacturers, they may be inverted. I cannot trust that the user will be able to create a custom label to suit my needs so I must use a default 4"x2.5" portrate label as my "default" label.
I know that CR only allows limited rotation so how do I mimic a text object rotated 180 degrees?
Any ideas????

See if this helps:
[1205091 - Text rotation in web application using VS.NET 2005|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Also, make sure you have applied SP1:
https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Using external LG monitor with 180 degrees rotated display

Hey everyone,
I just got a 19" widescreen LG monitor and I have it mounted upside down, so I rotated the display 180 degrees. However, when I move my mouse over links, the arrow jumps a little and is incredibly aggrivating. Has anyone seen this problem? Does anyone know how to fix it? It happens in Safari too and I already tried re-calibrating my monitor and restarting. Thanks.

Me too, but my LG monitor just stopped working after I installed the recent "Thunderbolt Firmware Update".
Literally the monitor was working yesterday. This morning I installed the update and now it's broken. Great update.
Anyone have a fix?

Can I rotate 2nd display through 180 degrees on a mac mini?

Hi there,
I was wondering if it's possible to rotate a 2nd display through 180 degrees on the Mac Mini? I don't have one yet but if it's possible I'll probably be looking to get one.
Thanks for your help,
J

Yes;
System Preferences: Display: Rotation = Standard, 90°, 180°, or 270°.

Rotating still photo 180 degrees??

I have imported photos into FCX and require to have them rotate 180 degrees from small to large. What process do I go through to do this?

Select the images. Go to the inspector and under transform change the rotation value.

Rotating a video clip 180 degree's

Hi there everyone,
I have some footage shot from a gopro hero silver 4. How can I turn a video clip 180 degree's?
Thanks in advance
Rchjr

Try rotate in Motion.
Or type in Rotate in the Search:
Adobe Premiere Pro Help | Adobe Premiere Pro Help

Rotating printouts -90 degrees

Hello,
Is there a way to rotate printout by given angle? During IFD compiling I have an 180 degree rotation option but it is not what I need.
Right now due to label/printer setup I need to make label designs using monitor pivot or have a neck-strain - see picture below to understand what I mean. I am not a 'superuser' of Designer so please take that in mind while you write any answer.
Thanks for support!

Greg & Heidi wrote:
How do I rotate the text in a cell 90 degrees?
Not a supported feature in Numbers.
If you would like this feature added to a future version, use the Provide Numbers Feedback item in the Application menu (in Numbers, the "Numbers" menu) to communicate your wishes to Apple.
Workarounds in the meantime:
• Put the text into a Text box, rotate the text box, and place the text box in front of the cell. Disadvantage: the text box is not anchored to the table, and will not automatically adjust to changes in size or position of the table.
• Set the format of the cell to Wrap. On a narrow cell this can give a result like this:
e
x
a
m
p
l
e
In a wider cell, the individual letters may be 'padded' with option-space characters left and right to ensure that only one letter (with the padding characters) will fit on a line. Example uses periods to represent the option spaces.
entered as:
.....E..... .....X..... .....A..... .....M..... .....P..... .....L..... .....E.....
appears as (option-spaces would not be visible):
.....E.....
.....X.....
.....A.....
.....M.....
.....P.....
.....L.....
.....E.....
Regards,
Barry

What is the quickest way to paint a straight brush stroke that is NOT on 90 or 180 degrees?

I do perspective drawing for interior designers and do the colouring in Photoshop. Think of old fashioned painting with a brush/copic marker against a ruler to get a straight line, but with varying thickness or opacity. I would like the same effect in Photoshop.
The closest that I have come is to press Shift before the brush stroke. That constrains the stroke, makes a very neat line AND allows me to vary the line/brush thickness as I paint.
Often the lines may need to be at an arbitrary angle which is NOT 90 or 180 degrees. The only way I know of for getting that brush stroke in the correct position is to make sure that each stroke is on a separate layer. Select the stroke/transform/rotate. Quite a few steps as opposed to the one it takes to draw the line in the correct position and angle with a brush/ copic marker on paper.
This becomes time consuming and difficult once you have many lines to paint and if you need to be accurate (as with perspective drawing). If you are working on a very large canvas the point of rotation can sometimes be very far from where you are working (i.e. on a vanishing point) and difficult to see without a lot of Zooming and moving around on the canvas.
To Stroke a path with the brush gives an unrealistic and even line thickness which does not look hand painted.
Any suggestions?
Has anyone ever used a ruler while drawing on a Cintiq? That may give the desired effect and be much quicker than selecting and rotating.

Thank you R_Kelly! Though it is still a bit tricky judging the angle as you rotate the page, your workaround is actually a bit quicker than having to rotate each line individually.
This allows me to see the line as it develops in place and I also don't necessarily need to create a new layer for each new brush stroke, if I work carefully. Very close to placing the ruler on the work space before drawing a line!
Thank you!

Mount imac 180 degrees?

I have a 27" iMac, 2011 vintage or so. For ergomatic reasons, I want to run the iMac rotated 180 degrees. This effectively lowers my screen height making it easier to read with progressive bifocal glasses.
Anyway, I have already turned my iMac upside down using a Vesa mount (and eliminated the factory mount/stand). There is a setting in Display settings that let's you switch the video and keep the video at 180 degrees, so I assume operating the iMac at 180 degrees (upside down) is OK? My question is this - will I do any harm to the iMac? It seems to be operating normally, and I use an app that lets me know the operating temperature. I can also adjust the fan speed to keep temperature in check. Assuming I keep an eye on operating temperatures, any reason this is not a good idea?

I had already done as much adjusting as I could to the monitor height and chair height. Still needed more adjustment, hence this unusual solution.

Way to flip video 180 degrees?

I'd like to mount a monitor underneath a shelf... is there a way in software to flip the image 180 degrees?
Thanks,
Jeff

Both VLC and QuickTime Player (at least the Pro version) can rotate their output. If you have ATI graphics you can download ATI Displays to rotate the entire screen.

All my pics turn 90 or 180 degrees when I open them on my computer?? HELP!

I have a few picture problems. First, when I open my pictures on my computer, they are randomly turned 90 or 180 degrees. So have to select and rotate to fix them. It's a pain in the butt!
Also, there are several folders in the DCIM folder. I can't delete them. Then when I open them, there are all of these "local disk" files. that are nothing and cannot be deleted. Anyone with any thoughts????????????

Hi there jjewson! I can certainly understand your concern here. I definitely want
to help you to get your pictures set up the way you want them to be once and
for all. With ios 8 you should have the option to rotate your pictures to the
point you want then once there, you should be able to save them. Do you back
your phone up to the iCloud or Verizon cloud? If the pictures saved in either
of those sources are set to the prior setting, they may be restoring on the
phone to the rotated version. I would log into your iCloud or Verizon Cloud and
check there as well. Hope this helps! Let me know how it goes.
bryans_vzw
Follow us at Twitter @vzwsupport

Rotate print 180 degrees

Similar Messages

Maybe you are looking for