Rotate screen - help!! N95 not 8gb
When i play my music (and slide my phone down to do it), my nokia automatically rotates to landscape which is cool, but then when i close it it doesn't rotate back unless i slide up to reveal the keypad and then back down again. Now i have tried to download rotateMe using all this symbian signed business but have had no luck - i'm probably too thick in fairness! Is there any settings on my phone to sort it out so it goes back to portrait screen without sliding up and down? Or even better a freeware application which automatically turns to landscape and back to portrait when you turn the phone which unlike rotateMe you don't have to get signed????
Thanks for your help
Andrew
28-Jul-2008 09:36 AM
cjlim wrote:
You don't need Rotateme for the N95 8gb because it has ASR built in. Goto Menu>Tools>Settings>Personalisation>Display Set Rotate screen to auto.
Check the thread title mate.
Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers
Similar Messages
-
Will not: rotate screen, camera will not work, iPad will not turn off, sound on side.
Ipad will not turn off, sound button does not work, camera does not work, screen will not rotate. Have new ios and update.
Reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset. -
I upgraded the software/firmware on my N95 as I get a new n97 tomorrow (not sure if that is a good thing or a bad one?). Anyway now that I have upgraded it I can not get it to sync with my laptop? Laptop is windows vista and office 2007. I have tried a search, but no luck.
Anyone help?
Paulif you have a problem to restore your data on the n95 and pc suite cannot do it, you can try a software called "noki" from http://www.nokisoft.com/ it is able to open your backup made with pc suite.
If you need backup the data to restore them on the n97, you can use the function "switch" on the n97 that will copy almost all data from your n95 -
Hi i have only had my nano for a week and already its driving me mad. everything was fine up until this morning, i went to play one of my games and the screen went mad and now its only showing half of what its supposed to. i havent dropped it or anything. i dont know whats going on.
that happened to mine once. just press the menu and center buttons simultaneously until the screen goes blank and the apple logo appears. this takes care of most any problems you might have. it's very useful
if that doesn't work, connect the Pod to the computer and click the restore button on the main iPod screen of iTunes
Happy Listening!
-MD55 -
Hello,
I just downloaded the newest firmware for the n95 8gb.
I had the heard that the newest firmware allows for auto rotate screen from portrait to landscape and vice versa.
Is this true and if so how do I enable this feature?
Thank you....29-Jul-2008 12:02 AM
cjlim wrote:
v20.0.016 is the latest version for the N95-2. I think you guys may have the N95-4 which is the US only version of the N95 8gb
Yes, sure !!
Check I've said having an RM-421 phone. That's the N95-4 or N95 NAM. The N95-2 is RM-320.
Should I assume that americans (not only north-americans) don't need to rotate their screens ??? :-)
Nokia - "Connecting people" making them to support themselves after wasting USD800+ on a inflatable dinghy "Flagship" :-(
PS: DON'T EDIT MY SIGNATURE PLEASE !!! -
Facetime keeps rotating screen when not moving, restart not helps
I am using ipad2, OS 4.3.1. facetime keeps rotating screen when not moving, and I restart ipad2 but it does not help. Is this due to earlier version of OS or it's a bug of facetime?
It is odd that your screen will only rotate without you touching your iPad, during a factime call. In all the factime calls I've made, I've never had my screen rotate if I wasn't touching my unit. I will say that the gyro on both my iPads is pretty sensitive and I've found it quite easy to get the screen to rotate with a simple movement of my iPad.
The only other suggestion I have is one that will take more effort and work and still, it may not solve your problem. It is one Apple will request you do, before making an appointment with the Genius bar, so you might as well do this.
You should back up your iPad, then restore your iPad from the backup. If that does not solve the problem, the last option is to do a full restore of your iPad as a new unit. Then, you'll sync over the content you want from Apps, to music, to pictures, etc. Again, before you do either a restore from backup, do back it up.
If all that doesn't solve your problem, make an appointment with the Genius Bar at your Apple store. If they find you have a deffective unit, they will replace it.
I hope you get this resolved. -
after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!
you'll want to restore it using itunes and recovery mode
http://support.apple.com/kb/ht1808 -
I need to fix my ipod and i don't know how, i am hoping that if i leave it alone over night that it will fix itself,
its on the lock screen and i cant do anything with the screen, i tried restarting it and it didnt work, so because i restarted it, it is not connected to wifi.
please help.
will getting a new screen help? or is there an easier, less expensive way?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
ipod touch 4g wont connect to itunes or come out of recovery mode, its just stuck on the connect to itunes screen and will not come out, i tried doing a restore but something happened and now it wont finish or do anything else please help and my itunes will not see that its connected. i also tried going though control panel and restarting the service and nothing happens. also i tried redoing the driver but its saying it cannot find any drivers for it
lol ok nvm i fixed it
-
Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks
In the article Resolve iOS update and restore errors this is what it says about error 14:
Check your USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
To narrow down the issue, you can also change up your hardware:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
If necessary, resolve any further issues with the USB connection, then with your security software.
If you're still seeing the error message, check for hardware issues by following the next section. -
Vendor Help is not Displaying in the Front end Screen
Hi,
Iam Working in SRM 5.0, Extended Classic Scenario.
I have Replicated all the Vendors & Materials from ECC to SRM. While Iam trying to create SC, if i select the Preferred Vendor Search Help iam getting the vendor Pop Up Screen in that i have all the vendors which got replicated from the ECC to SRM. If i select a vendor which is related to the same Purchasing Org. its not coming into my Input box, but an error msg is displaying saying that.. "No vendor assigned" & "No vendors/contracts/info records exist". Can any one help me in this, its very urgent.
Points will be Rewarded.
Iam giving my personal E-mail id, u can send some of the docs which is related to this Issue.
[email protected]
Thanks
Girish.Hi Girish,
Apply this note and it should fix your problem:
<b>Note 845883 - Preferred vendor search help does not retrieve values</b>
Pls assign points for usefull answers !
Sundeep -
Part of my iPad screen display does not show. It was not dropped and neither is the screen broken. I was advised to see the local service provider for a diagnosis.
I had finally managed to find time to find a local service provider last week (not easy) and was disappointed to be advised of Apple's policy of one for one exchange i.e. they wont repair and said that i would have to replace with a whole unit. As my unit is no longer under warranty, it meant that I had to pay for the full price of a new unit!
I might as well have paid for the latest new unit but since my unit is only 2 years old at most, it would be a great waste of money.
How can this be? Does this mean apple's product is inferior and do not last since warranty is only for one year?
I sincerely hope there is a favourable solution otherwse my money is flushed down the drain.
HELP!!!I was using my iPad last night, shut the power off and when I turned it on this morning 2/3 of the screen is not working. It looks like the pandalela picture. What is the answer to fix this; is this a screen issue or and electronics issues. Has anybody else experienced this?
-
i have connected it to itunes like i was told to do and it wont do anything because its locked with a passcode and its frozen on the lock screen and will not let me enter myt passcode and after a while it just shuts off, it has been doing this for almost 48 hours. I was told to hold the home button and power button to shut it down and that I could then restart it and it would work... Nothing has helped, What can I try???
Reset the device by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.
If that does not resolve, restore the device via iTunes on the computer.
If all else fails, take the device to Apple (or whomever provides support in your country) for evaluation and possible replacement. -
Blank screen in itunes store-please help im not very technical and when i click on my itunes app the screen is blank how can i fix this please?
See if any of the following fix it.
Try logging out of your account on your phone by tapping on your id in Settings > iTunes & App Store and tap 'Sign Out' on the popup and then log back in.
If that doesn't fix it then try closing the iTunes store app via the phone's multitasking bar and see if it works properly when you open the app : double-click the home button to open the taskbar and then swipe or drag iTunes from there up and off the top of the screen to close it, and the click the home button to close the taskbar.
A third thing to try is a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot. -
after resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!
Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device
Maybe you are looking for
-
Dear All, I have the following scenario: 1. I need to checkin a document to UCM 2. Post the checkin, i need to generate an image dynamically using my custom java code & checkin that image also to UCM as a new revision of content id say img_001. 3. On
-
right bit of a dilemma i have a 20" imac alu 2.4 c2d 4gb ram 320gb hdd and attached is a samsung syncmaster 940bw which i have just bought off the cheap from pcworld UK what i want to do is use the samsung for viewing the video im editing, i know i c
-
my hp office jet 4500 wireless printer lost its connection. Tehre is nothing in the printer que. How do i reconnect my wirelss printer?
-
Can I prevent my book opening with the contents page?
After the intro video I would like my book to open with the first page full screen, not with the contents. Is this possible? Thanks
-
Hi, I just wanted to know if there's any reference to start J2EE. What would be the requirements before I start? Which is better to use IDE for J2EE, Eclipse or Netbeans? I am appreciate for the comments to be post on here. Thank you.