Rotated a picture went into savingbeen in savings for 3days cannot delete or get to my other photos iphone 5s question need help
question; on i pnone 5s rotated a photo in my photos been in saving mode for 3 days cannot delete or cancel also can't get to any more of my pics
Reset the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should reboot and release the problem you are experiencing.
Similar Messages
-
I've recently spilt a little bit of water on my Macbook Pro 13" and some of it went into the keyboard, the first thing I did was get paper towels and dry it off, everything is except now the speakers sound different, and a little bit lower in volume, basically the speakers just sound weird, there's no word to describe it, I can't really hear any bass from my speakers
Liquid spills, why your MacBook chassis is a one-way valve for spills
After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
contact Apple for in shop diagnostics and cost estimation ....possible parts replacement. -
The problem is not happening with any other device that I have. My iPad, iPhone and another laptop all connect fine. In fact, it's not even the connection. The computer will connect to the net. It just will not open any page. It starts to open and then hangs and hangs. It will not move. Weird since it worked great for three weeks and then all of the sudden, nothing. Click on Safari and I have short hope that it will move and NOTHING! Any thoughts why it would hang up like this and only with this specific network?
This is a known Lion issue, hopefully solved in 10.7.3. But may not be solved immediatly after updating, that was my case.
To make it work i followed those steps.
1.- Restart
2.- Lion 10.7.2 Update
3.- Uninstall netwokrs
4.- Shut down
5.- SMC reset
6.- Reinstall networks
I dont know whether all the above steps are necessary, but for me the update didn't work properly before SMC reset. (I am running a MBA mid2011)
Hope it helps,
Cheers -
Please help!
Yes, i'v already signed in apple & the iCloud is on as usual, but it is still not working.
I have no problem to download the new app or redownload the apps I'v purchased before at 'search tab', but I can't get a list of my previous purchased but not installed on my iPhone Apps at the 'Updates/Purchases tab' in App Store. I never had this problem until I updated my iPhone 4S software from iOS 5 to iOS 6. -
When mousing over the page where I can see what is displayed it brings up my desktop,please help!
#1:Open Properties
#2: Click compatibility
#3: Click change settings for all users
#4: Under settings click all of the boxes except the first one.
That's how I got it to work -
My Nano suddenly went into voice over mode and I cannot make it stop.
It started reading menus and options when I turned it on recently; I didn't go near any setup screens. It talks even after I've selected and started to listen to a pod cast. It will start over again in the middle of the pod cast for no apparent reason. I've already tried restoring factor settings.
#1:Open Properties
#2: Click compatibility
#3: Click change settings for all users
#4: Under settings click all of the boxes except the first one.
That's how I got it to work -
My screen went into a jumbo screen view and I can't get it to return to normal
How do I get my iPhone out of JUMBO screen view and back to normal
Jme218,
Let's get this annoyance fixed! Most phones have an Accessability feature that will allow zooming in on the screen. On your phone please go to Settings>General>Accessibility>Zoom (OFF). Keep us posted if this does not work for you.
SandyS_VZW
Follow us on Twitter @VZWSupport -
I started to replace my ipod 4g screen but the silver plate that goes on top of the battery won't go back into place. It's not lining up with the screw holes so i can't finish the repair. Please I'm begging you all to help me with some advice and tips!!!!!!!!!!!!!! It will be greatly appreeciated. ASAP
Your best bet is to email the company that sold you the screen for advice. Or you could search on YouTube for repair instructions. Hopefully, you will see where you went wrong. Apple will not do an out-of-warranty replacement on an iPod that has been opened.
-
local provider Qwest nstalled "Bing" onto my internet without my permission , and since then, i cant log into my Gmail acct. Wont recognize my name or PW. no log in for over 2 weeks now. Getting desperate. i have asked for help using online support dozens of times with no reply from mozilla
Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution! -
I am running a script from my banking facility which asks me to load an image of the front and back of the check. I never had a problem before, but this time when I try to load the images either directly from the scanner, or from previously saved jpg files I get an error window message that says - Error Java heap space,
Ed MarcatoI am running a script from my banking facility which asks me to load an image of the front and back of the check. I never had a problem before, but this time when I try to load the images either directly from the scanner, or from previously saved jpg files I get an error window message that says - Error Java heap space,
Ed Marcato -
cant use my facetime keeps saying "an error occured during activation. try again" ????? need help
http://support.apple.com/kb/ts4268
-
Premiere Elements preview window is freezing again!! Had this problem 1 month ago and fixed by going back to older Nvide driver. Problem is back. I am so frustated with Elemnets and thinking of going to Pinnacle Studio??
Kipperpatty
Check List
(Please correct me if indicated...I am assuming NTSC set up....
Assuming that your Panasonic is recording 1080p (1920 x 1080 @ 30 progressive frames per second), then your project preset should be
NTSC
DLSR
1080p
DLSR [email protected]
You can check the project settings being set under Premiere Elements Timeline workspace, Edit Menu/Project Settings/General and the regardings for Editing Mode, Timebase, Frame Rate, Pixel Aspect ratio (even if the fields appear to be grayed out). If the above project preset was set, then the Project Settings dialog should look like
What computer operating system are you using? Go back to the NVIDIA web site and look for video card update around May 2013 instead of August 2013. Is there one? If so, try that version of the NVIDIA GeForce driver. See the Announcements at the top of this forum for the links involved to get this information and update. If you need help on this, please tell me the name of your computer operating system and NVIDIA GeForce and I will make suggestion.
Do you still have the latest version of QuickTime installed on your computer with Premiere Elements 10? If you go to Premiere Elements 10, Share/Computer/QuickTime, do you see presets for the QuickTime category?
When you import these files into a new project with the project preset mentioned above,
a. In Project Media, do you see a thumbnail for it (image in thumbnail)?
b. When you drag the file to the Timeline, do you see the file represented there Video 1/Audio 1 with content?
c. When you press the play button of the Edit area monitor, do you see the file playback completely?
d. When you double click the file's thumbnail in Project Media, does that bring up the Preview Window with the Set In and Set Out points?
Please take one question at a time to consider and work through each with the project opened before you. Skip over anything that you do not understand or cannot work through in the opened project. We will work through all.
Thanks.
ATR -
I just hooked up to my computer to down load new songs it said new version of software is avalable, after down load I pod went into restor mode. Is there any way to get it to work beside the restore? and will I loose all my photos and vidios?
Best Not to interupt the Update Processs...
See Here for Details on what is happening...
Updating to iOS 5
http://support.apple.com/kb/HT4972
Post back if you have any issues... -
After updating to itunes 10.4 restarted my pc windows 7 64 bit, my ipod touch 3rd gen went into restore mode,when trying to restore it works for several minutes then says it cannot be restored, unexpected error occured (1604) I have followed the reslution checklists, still wont work, any thoughts?
Hi
Cannot offer any thoughts other then i am having the same problem. updated my itunes windows7 32bit ipod touch 4th gen. went into restore mode lost over 700 songs. i dont get any error messages i just cannot get into itunes store. Firewall is allowing access, etc resolution checklists done, and nothing.
Hopefully this issue is fixed up soon... -
My Ipod went into recovery mode and my games are gone, how do i get them back?
My ipod went into recovery mode and restored. How do i get my games back on itunes and everything? Please help!
Amanda,
Any and all apps can be redownloaded for free. For more information, see this article.
http://support.apple.com/kb/ht2519
B-rock
Maybe you are looking for
-
URGENT!! Default Vendor Payment Methods
Hello SAP Folks, Question: Is there a way to default a vendor payment method when the payment method is not defined while creating the invoice? Let's say in the vendor master there are 3 payment methods .. Wire, ACH payments and Checks ... there is
-
User getting print output with logo and footer is cut
Hi Experts, User is trying to print a PDF from Portal system and the print output comes with the logo cut at the top on the right handside and footer cut at the bottom Please can you let me know what could be the issue and how to investigate the issu
-
ORA-01034 ORACLE NOT AVAILABLE
hi everybody, i'm trying to install a second instance on Oracle8.1.7 on Sun Enterprise 250 (with Solaris 8). the previous instance has this init.ora file: open_cursors = 300 max_enabled_roles = 30 db_block_buffers = 10240 shared_pool_size = 52437800
-
Wireless-B BEFW11S4 "wireless B" LED light...
I'm trying to set up a wireless router with my DSL but I'm having a problem. I followed the directions (plugged the cord from the modem into the internet slot on the router and the other cord from an internet port on the router to the computer) but
-
ICC Profiles and ACGetWorkingSpaceProfile
Is there any way to override the default ICC profile that is returned by a call to ACGetWorkingSpaceProfile? The default profile returned for kACWorkingCMYK is "Acrobat 5 Reader CMYK". We would like to insert a custom ICC profile for the case where t