Rotating an image does not rotate the canvas

When I use "rotate image" from the IMAQ library the pixels are rotated, but the image size( in respect to X and Y size) remains the same. If you start out with an image where X and Y are very different you end up with an image where lots of pixels are clipped and lots are black.
Is there a way to "rotate" the X and Y outline together with the image, short of converting to a 2-D pixel array and rotate that one?
Gabi
7.1 -- 2013
CLA

gabi,
unfortunately, the picture control cannot be rotated, so far as I have ever seen. You will probably need to do this within the picture control itself. I would suggest just enlarging the control and centering the image. Fill in the rest of the image with black so that you don't have to worry about the background (or use white and figure out how to backfill with white.)
I know it sounds difficult, but it is your only choice. Even the opsys to do this would perform the same operation. Its just not done for you yet.
Perhaps someone out there knows a shortcut. If so, it will save you some time, and I will learn something as well.
Good luck

Similar Messages

My Still Image will not fill the Canvas????

I want to create the effect of panning down through space.
I took a still frame from a movie in FCP sized at 720 x 576 and brought it into Photoshop, and made the canvas 720 x 1146 and copied the image and pasted it on top of itself. So my image is now 720 x 1146, and I exported it as a .psd and brought it into FCP.
When dragged from the Browser and into the Timeline, the image does not take the full width of the Canvas. It seems long enough, though now not wide enough to fill the Canvas. What is going on?
Thanks.

well 720x576 is PAL. Why you've got a 640x480 sequence only you can say, if you want it to be 720x576 then you should make a new sequence and choose an appropriate sequence setting.
The reason your still is displaying small in the centre of the frame is that fcp is automatically scaling the 1146 pixels down to fit the 480 pixel height of the sequence. If you set the canvas view size to a small size (25 or 50% and turn on overlays you can click on the corner of the wireframe around you still and drag to resize it to fill the width of the frame and overlap the top and bottom. Move the playhead to the frame you want the tilt down to start and then you can click anywhere within the wireframe to reposition the still. Double click the still in the timeline to load it in the viewer, then go to the motion tab and make a keyframe here, then move the playhead to where the tilt down will end and make another keyframe.

I have a 27" Viewsonic 1080p monitor connected to an oldish Mac Pro with an ATI Radeon X1900 XT Graphics card. The problem is that the image does not fill the screen?!?!?

I know the image can fill the monitor, because at start up, the white Apple logo screen fills it up. But once the system starts up, there are bands of black framing the image. I have searched extensively on the internet and found the following clues, none of which solved the problem:
1) In the Windows world you can get software from ATI called Catalyst Converter that gives you the cpaobility to scale the image. This software/feature is not available for Mac users.
2) Viewsonic's web site has a trouble shooting tool. This came up in response to the topic "you have recently upgraded to a larger monitor"
"This could be an issue if you have an older Apple using the system's onboard memory to support both the system and video display. Even if you have enough onboard RAM to support a higher resolution, it will not since the system will use some of the memory. Because the true video RAM available is much smaller than the total onboard amount, the system limits the size of the image. You will need to contact Apple to get an upgrade in onboard RAM or update the complete system."
I have 2GB of RAM, so lack of RAM memory does not seem to be an issue. I am running OS 10.6.8
Does anyone have any clue how to solve this problem. It is frustrating to have a 27" monitor behaving like a 25" monitor.
Thanks in advance for sharing any experience on this.
JD in PA

http://www.xlr8yourmac.com/Graphics/radeon_X1900XT/X1900XT_dust_buildup.html#sto rytop
http://www.xlr8yourmac.com/Graphics/X1900XT_Overheating/ATI_X1900_artifacts.html
http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
http://www.amazon.com/Apple-ATI-Radeon-5770-MC742ZM/dp/B003Z6QH6M/
http://www.amazon.com/PCIe-Power-Cable-nVidia-Video/dp/B002UR1654/
http://www.amazon.com/gp/product/B0036Q7MV0/

The "save image" does not transfer the photo from facebook to ipad album. Is there another way to save a picture from facebook to the iPad album?

I cannot transfer or copy pictures from Facebook to my iPad album. I tap the photo and it says save image but does not show up in my album.

Go to Settings>Privacy>Photos. See if you need to allow Facebook access to the photos app. Also look at the Facebook setting under Twitter and see if there is a setting in there that you need to enable. Finally go to Settings>General>Restrictions>Privacy>Facebook and make sure that it hasn't been disabled in there.

My edit text & Images does not display the options

The Font family, size, alignment box does not appear anymore. What happened?

Hi champsters,
Is this occurring with a specific pdf?
What version of Acrobat are you using?
Have you tried updating it to the latest patch and checked?
Regards,
Rave

Windows 8.1, BootCamp does not find the ISO image.

When I try to install Windows 8.1, BootCamp does not find the ISO image.
I purchased Windows 8.1 Pro, I downloaded the .exe requested file from a Windows computer, performed the steps recommended by Microsoft in order to create the ISO file saving it on a flash drive as well and, as a precaution, on a DVD too.
I performed the "Download the latest Windows Support Software from Apple" step directly into another flash drive and having it completed BootCamp displays the following message:
"The installer disc could not be found – Insert the Windows installer disc and wait a few seconds for the disc to be recognized. "
So happens that I have tried this using the DVD, pendrive and also copying the ISO file to the desktop and to the "Documents" folder as recommended in certain websites, but none of this has made the process go ahead. What can I do?
My equipment is a mid 2011 iMac running Mac OSX 10.10.1.

Dear Loner T,
thanks to my coworker, the solution was unpacking from that ISO file which I had recorded (according to the steps indicated by Microsoft), but now using Nero software (Windows) and then recording by the most common way in a new DVD. See the screen of the first DVD before unpacking:
This true saga only demonstrated that the generated ISO file as an option at the time of the Windows installation, is not for direct installation through BootCamp, and as a I could check, even for direct installation on a Windows PC. See the last DVD burned using Nero and again recorded:
The execution of BootCamp, was perfect
Thank you for attention to my problem!

When I open Photoshop CS6, the image does not show in Photoshop. The image IS open, i.e. the filename is shown on a tab and the image layers show in the layer panel. What is going on?

Both Photoshop and Bridge open as usual. But when I open an image, the image does not show in the image area. The image filename does show in a tab and the layers show in the layer panel. What is going on and how do I fix this.

I resolved the problem. It was somehow related to my using Microsoft
theme pictures. I set Windows to use the basic theme and the problem
went away. Thank you for the suggestions.
Jac

I am having problems opening images renerated in lightroom5 into cs6. Cs6 bridge does not see the lightroom libarary. If I open lightroom and right clik the image, edit in cs6, 6 opens but the picture doesnot follow. What is going on? Give me a hand.

I am having problems opening images renerated in lightroom5 into cs6. Cs6 bridge does not see the lightroom libarary. If I open lightroom and right clik the image, edit in cs6, 6 opens but the picture doesnot follow. What is going on? Give me a hand, thanks.

What edition of LR 5? What edition of ACR does PSCS 6 contain. If they are not parallel (same edition number x in [5 or 8].x ), is LR making a tiff or psd rendition of the image?

When i am editing in finalcut, my image does not look particularly good. do i need to export it at the end in order to see it in full high definition? thx

when i am editing in finalcut, my image does not look particularly good. do i need to export it at the end in order to see it in full high definition? thx

Open FCP X Preferences / Playback / Use Original... Media / Playback Quality...
How does the exported movie-file looks like...?
Regards
Nolan

I have Lightroom 3.6 and it does not recognize the raw images from my Canon 7d mark II, suggestions?

I have Lightroom 3.6 and it does not recognize the raw images from my canon 7d mark II, suggestions, do I need to upgrade?

Yes, you need an upgrade for native support in Lightroom. You need version 5.70 or higher; current version is 5.71.
Alternatively, you could use the most recent DNG converter and convert the raw files to DNG files before importing into Lightroom.

In the Program Panel, when I click the Spacebar (i.e., "Play"), the image does not advance.

In the Program Panel, when I click the Spacebar (i.e., "Play"), the image does not advance. When I click "Play" again (i.e., "Stop"), the still image confirms that we have moved on. Please, What must I do so that when I click the Spacebar (i.e., "Play"), the image does indeed advance? Thanks!

This pertains to Adobe Premiere Pro CS6:
Thanks for your prompt reply. This is my first post and I appreciate your patience. I imported media into the Project Panel. From there, I placed a few clips into a sequence in the Timeline. In the Timeline, I clicked on a clip. I then double clicked in Program Panel, and could then see the clip. However, when I click on the space bar, (i.e., "Play") in the Program Panel, the image in that panel does not advance. When I click "Play" again (i.e., "Stop"), the still image confirms that we have moved on a bit in the footage. (The audio plays normally, confirming that we are advancing in time. )
I want to be able to press the space bar in the Program Panel and to see the "motion picture" in the Program Panel.
Please, What must I do so that when I click the Spacebar (i.e., "Play") in the Program Panel, the image does indeed advance? Thanks!
Not sure I yet have the capabibility of providing a URL of the problem.
Thanks for your guidance,
David

Camileo S10 Camera does not remember the image-stabilizer setting

Hello Forum reader,
Is it normal that my Camileo S10 Camera does not remember the image-stabilizer setting?
I mostly use the 720px setting and stablilizer on, but after the camera is turned off the stabilizer is off again.
Greetzz.. Ben

Hi
This might be possible.
I remember that the focus does not work if the stabilization has been enabled
So maybe its an intention of the manufacturer that the stabilizer would be disabled again.
Greets

My computer (MacBook mid-2007) does not recognise the battery suddenly. A cross appears on the image. I have tried uninstalling and re-installing it but it didn't help. Is the battery dead?

My computer (MacBook mid-2007) does not recognise the battery suddenly. A cross appears on the image. I have tried uninstalling and re-installing it but it didn't help. Is the battery dead?

Welcome to the Apple Support Communities
Try resetting the SMC > http://support.apple.com/kb/HT3964
If it doesn't work, take the Mac to an Apple Store to get it diagnosed

I am using CS6 and when I go to save an image for Web the image does not retain its quality

I am using CS6 and when I go to save an image for Web the image does not retain its quality. The first week I did this it worked just fine and now the images save very pixely.
Here is a screenshot of my image on the artboard as I am editing it
Here is a screenshot of the image as I'm trying to save it for Web
As you can see, the image becomes pixely. I have tried to save it as every type of png and jpeg but nothing seems to work. I have no idea why it has started to do this. Please help!

Change None to Art optimized then click apply(alteast in CS5 there was an apply, believe they removed that in CS6 as so many people missed that part).

The source drive does not contain the HP Recovery Image

I'm trying to create a bootable USB stick with the Recovery disk creation utility of HP. After having moaned that my 8560w was running on battery, and that there was no room on a 16 GB FAT32 formated USB stick, I finally came to the next screen that says "The source drive does not contain the HP Recovery Image" which is wrong: partition D is primary, contains the recovery disk. So what ? No way to create a recovery disk ? Note also that I have no Recovery Manager (???) and that F11 has never worked (??????). HP decision to get out of the PC business is probably the best thing that could happen to customers.
pher
This question was solved.
View Solution.

Hi,
Check the below link:
Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 7)
Quote from this document:
"Use a blank USB flash drive with at least 32 GB of memory. HP recommends using a name brand from a manufacturer you trust."
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Swf does not load the images on the web

I made a swf that works perfectly on my computer.
The swf does not load the images, cal with the buttons, when I use the swf on the web.
I think the problem is due to the fact that the web changes the path of the file, that is called with the following variable:
var ImmageUrl: String = "MyFolder2 /" + MynamePic + ".jpg";
The path is C:/MyFolder1 "(with the swf)" /MyFolder2 "(with the pics)"
Any hint ?
Thank you.

When you place an swf in a web page, any files that the swf loads have to be targeted as if the swf is sitting in the same folder as the html page. If you have the swf in a different folder than the html page, then you need to adjust the paths for the files it loads so that it acts as if it is in the html page's folder.

Rotating an image does not rotate the canvas

Similar Messages

Maybe you are looking for