Rotating and cropping, then rotating back again

I need to crop my clip that I made in the vertical orientation.  I needed to crop out the top and bottom areas, so I rotated the clip to the horizontal position.  I was able to crop out the parts I needed.  My question now is, is it possible to rotate it back to the original orientation (vertical) with my saved cropping?  I haven't been able to figure out if I can do that.

Correct, becasue Crop takes away from the edges only.  Scale is the physical size of the clip.

Similar Messages

  • How can I transfer video taken with my iPhone to my iPad WITHOUT using a computer or iTunes? I'm going to Europe for a month and want to use my iPhone to take pics and video, then come back to the hotel room and use my iPad to edit/store each evening.

    How can I transfer video taken with my iPhone to my iPad WITHOUT using a computer or iTunes? I'm going to Europe for a month and want to use my iPhone to take pics and video, then come back to the hotel room and use my iPad to edit/store each evening. I don't want to use my iPad to take the video...too large/bulky. And I WON'T have a computer with me...I purchased the iPad to take with me so I could use the RDC to my home computer and avoid taking my computer at all. Is this possible?

    here is a cheaper solution than camera kit and a lot easier if you have WIFI available.
    I use the PhotoSync APP (I think its a $1.99) will transfer videos and photos over WIFI to any other IOS device or even PC/MAC. Great app since I like doing video and photos on my IPHONE and transfer to IPAD2 without synching through computer or doing cloud based storage.
    You can even send photos/videos from your MAC/PC to your IOS devices that way too. Makes it so much easier.
    Here is the link;
    http://www.photosync-app.com/

  • TS3048 My bluetooth mouse usually loss with unknown reasons and it then automatic connected again after some clicks.

    Dear Sir or Madam,
    I have bough my Macbook Pro since 8 months ago and it seams quite good upto now, however in these days my Bluetooth mouse ussually lossed with unknow reasons and it then automatic connected again after some clicks.
    I have check mouse battery as well as relevent reasons like turn-on, but it still repeated and I don't know what is exact problem, it due to my mouse or my mac?
    Thank you very much and looking forward to your help.
    BR

    Check your Bluetooth, do you have a bunch of stuff listed in there that you are no longer using?
    Or another peripheral you stored away in a cabinet near by?

  • Imac asking to be shut down and restarted, then does it again???

    My computer all of a sudden starts telling me to press the power button to shut down and then to restart again. Also "Finder" not working once computer started up as well as safari just disapearing. Ran a hardware test and got harware " detect error 4MEM/9/40000000:0xa908b918" error message
    Just realized its been 1 year and didn't buy apple care : (
    Can someone please tell me what this means??

    Hi acj1978
    Welcome to Apple Discussions
    Sure sounds like a Kernel Panic do to a bad, incompatible or a partially dislodged RAM module.
    *If you have just recently upgraded the RAM:*
    1. Check to be sure that all the modules are in spec and full seated in there slots.
    2. Go back to using only the original modules that came in the iMac.
    *If you only have the factory RAM and not upgraded:*
    1. Check to be sure that both modules are fully seated.
    2. Try the modules one at a time to see if it will boot on either one.
    When installing or upgrading RAM you have to push real hard on each module with both thumbs to fully seat them in the slots. For assistance, see > http://support.apple.com/kb/HT3918
    For replacement RAM, see > http://eshop.macsales.com/shop/apple/memory/iMac
    If you are not comfortable working in the RAM bay yourself, take it to your Local Apple Store or Apple Service Provider and have them check it out.
    Dennis

  • I received an apple update yesterday and since then my back button on the upper left of screen does not work. How can it be fixed.

    I received an automatic upgrade for my Mac Air and since then I have not been able to use my upper left back button. How can this be fixed. I don't want to go back to History to get back to the page I had been using.

    Make an appointment at the genius bar and get the phone replaced.

  • I am trying to download the update to Photo Effects (Lite) v 3.0.0, for several weeks now without success. I press the update button and it goes away, then comes back again without any change. Can someone help please?

    The update to Photo Effects (Lite) v 3.0.0 won't work. I've tried for several weeks without any result. I press the download button and it disappears, then reappears again. Can any one help, please?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
              /var/log ▹ appstore.log
    from the hierarchical list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    Each message in the log begins with the date and time when it was entered. Select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    ☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • My iPod touch 5 will not turn on, charge, is not recognized by computer or iTunes, will only be recognized when in recovery mode but then an error 1601 occurs and iPod then goes back to being dead and nothing happens

    My pod is literally not breathing, no screen display no matter what, I've tried everything, wondering if there's anything I've missed :( please help

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • I can't open attachments in my e-mail. It shows downloading and finishes then takes back to homepage.

    For the past several months I have not been able to open attachments in my e-mail. I did not have problems in the past. I have not done any updates or made any changes. It shows downloading and completes and takes me back to my homepage with all the icons.

    OK - I fixed this myself. On a hunch I used Firefox to check my plug-ins. I deleted all the old java plug-ins and installed the latest update and hotmail now works. How people with no computer knowledge at all solve their problems I'm blowed if I know. It shouldn't be this hard...

  • Trouble with Theme and cropping, then PhotoPresenter

    I posted a question here a month ago stating that I was having trouble with my photos being cut off when using a certain theme in iDVD. Eventually it was evident that in order to get the edgy theme I wanted without cropping I needed to use a different program. PhotoPresenter was suggested and I purchased it. Today I finally created a slideshow in this program, sent it to iDVD, and burned it. Upon viewing on the television all the pictures are very blurry/pixilated. It's not just a little....even a novice would notice. Is there something I can do to get a better quality slideshow?

    Last night I made a PhotoPresenter slideshow using the Color Planes theme. I have a series of a test image that go from .307 megapixels (640x480) to 19.66 megapixels (5120x3840). The PhotoPresenter produced slideshow looked as good as could be expected on a DVD and on my computer screen (actual size) I couldn't see any difference between the images.
    Yes, there is pixelation during the transitions, but that is part of the transition design.
    The test images are sharp and well exposed. You may be able to improve the image quality of your slideshow by doing some additional sharpening on your images before using them in PhotoPresenter.
    In addition, I followed the instructions in PhotoPresenter and opened iDVD before I sent the slideshow directly to iDVD. I did NOT create a movie file that I used in iDVD. Did you also go directly to iDVD?
    Later today I'll burn the disk image I made to a DVD-RW disc so I can play it on my 26" Sony Bravia HD TV set; I don't expect that to change my observations.

  • My dad gave me his old iphone 5 3 weeks ago and i synced  it today on itunes and everything then went back to his old settings what do i do

    HELP!!!

    You (or he) didn't clear the phone before you started using it. He must sign out of Settings/iCloud, then you can go to settings/General/Reset - Erase all content and settings.
    When you set it up use your Apple ID, not his. See: How to use multiple iPhone, iPad, or iPod devices with one computer - Apple Support

  • Itunes says "Itunes requires a new version of Apple Mobile Device Support . Please uninstall both Apple mobile device support and Itunes, then install Itunes again." I have did this and Itunes still continues to say this multiple times. Please help me!

    My ipod wont connect to Itunes!

    Try removing and reinstalling all the Apple software by:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • Friends... i have been using an iphone 3(4.1/8B117), i jailbroke my iphone and then mistakenly deleted some of the cydia files after which my iphone started rebooting,and since then its restarting againg and again..please help..i'll be glad !!!!

    Friends... i have been using an iphone 3(4.1/8B117), i jailbroke my iphone and then mistakenly deleted some of the cydia system files after which my iphone started rebooting,and since then its restarting again and again..only the apple logo appears in the black screen and my fone restarts again... guys please help..i'll be glad !!!!

    Under the Terms of Use of this forum it is prohibited to discuss jail breaking. By jail breaking your iPhone you void any warranty you may have, forfeit any support from this forum, leave your iPhone vulnerable to malware and risk bricking your iPhone should you attempt future software updates or restoring your iPhone.

  • TS2621 My email opens then closes down again seconds later

    and the same issue with mail settings - tried restoring to factory settings then restoring from back up but still no result!
    Anybody have any idea whats going on?
    Thanks

    Hi Go to Settings Email  Accounts Delete email account then add back again. Do this with each account that is not working. Cheers Brian

  • My Iphone 4s automatically synced when I started ITunes. When it did this it saved all of my pictures on my computer to my phone. How do I reverse this and take the pictures back off of my iPhone?

    My Iphone 4s automatically synced when I started ITunes. When it did this it saved all of my pictures on my computer to my phone. How do I reverse this and take the pictures back off of my iPhone?

    Yeah, my iPhone 4S sometimes manages to connect to wifi for about 10 minutes now. I think there is a problem related with the antenna because when the phone heats up, the WIFI stops working. I had a similar experience with my older iPhone 4S which I bought from the U.S.A. (unlocked version) but after a couple of days, WIFI icon grayed out and I wasn't able to switch it on and off. Now the phone I'm using was bought in Turkey from a local carrier, (it's not locked I suppose) I'm planning on upgrading to an iPhone 6 and I will try to get my 4S repaired. I hope it is something related with software rather than hardware. Because a friend of mine sent his phone to the local Apple store to be fixed, they sent the phone back claiming that they had repaired it. But in about 2 days, the phone shut itself down and never turned off back again lol. I don't want to experience the same thing. But anyway, thanks for your answer. At least now I know that I'm not the only one that has this problem .

  • 4s trouble with wifi. it connects however is very slow then switches back to 3g

    If anyone out there could help I would appreciate it!
    iphone 4s brought as a replacement form Apple on the 6 September  2013 has developed an issue!
    I can connect to my home BT HomeSpot however its so slow and will then go back to 3g, so frustrating!  I have a BT Booster and the single is strong, we have no problem with any of our other devices.
    i've been to the Apple store twice now and they've said there is nothing wrong with the device as it works on there wifi!
    Can anyone help?

    I have brought the Virgin Media super hub back to the manufacturing original configuration then changed the user name and password. Only my iphone was connected. Then I've switched to 5 Ghz = 30Mbpm BANG!; went back to 2.4Ghz=dead. Now is getting worst. At the beginning it was picking at least 2Mbpm. Then 1. Then 0.something. Now it doesn't even connect. I'm pretty sure the iphone 5 must have 2 antennas and the one that uses 2.4Ghz is just gone.
    Any advice?

Maybe you are looking for

  • What´s happening with my iMac?

    After all, sorry for my english. From a couple of months ago, when I turn on my iMac I can see stranger lines and colours on the screen. Once OSX is ready, lines disappear. Yesterday I take a photo with my celular phone: http://personales.ya.com/atle

  • How to Fix the Macedonian Keyboard

    The Macedonian keyboard supplied with OS X 10.3/10.4 has an error, where the character з (U+0437) has been replaced by э (U+044D), so that it cannot be used to type this language. A corrected version of the keyboard, Macedonianz.keylayout, is availab

  • HU Movement History.

    Everytime a HU is moved (within warehouse) or Putaway-Picked is there a history maintained in SAP for this? Is HUMO the only transaction to view this? Which tab in HUMO details.

  • Maps in E72, compass and map rotation glitches

    The new OviMaps 3.03 and E72 with the magnetic compass has a few problems: - The compass "takes over" map rotation in E72, the map will not rotate according to GPS heading information at all. If the compass does not work (magnet nearby, inside a car

  • All Fields of data source doesn't appearing in source field of transf

    Hi all Bi experts, I am working on converting our OLD bw flow (3.x) into new BI7.0 flow. when I am trying to crate transformation from the context menu of data source I am not getting all fiels which are available at data source level.At data source