Rotating pages when double-printing Adobe Acrobat XI Pro

Why when I combine files in Adobe Acrobat XI Professional do some landscape pages rotate when double printing? Note it's only some and there doesn't appear to be any method to it, as adding or removing random pages from the document affects which pages rotate.
Any help would be great, thanks.

It Might help if I can spell let see if I can do better:
It had the ability to uncheck any choice.It would print as it was.
The way its setup now its an either/or Proposition when printed.
Landscape the way it prints is to turn it on its side to print; but; you turn the page to view as landscape
It doesn't or not supposed to, affect the content.
In otherwords its not supposed to chop off some of the content, just so you can look at, in Portriat mode.
example a house in Landscape should look roughly like:
When its rotated
Would be same size same position, but laying on its side.
When paper turned Land scape position you would have your doument as written in Landscape.

Similar Messages

When I install adobe acrobat XI PRO, it converts everything on my computer to an adobe icon, and when I try to open it, it open adobe acrobat. For example, I can't open word, excel, internet explorer, or any other document or program because it thinks its

When I install adobe acrobat XI PRO, it converts everything on my computer to an adobe icon, and when I try to open it, it open adobe acrobat. For example, I can't open word, excel, internet explorer, or any other document or program because it thinks its acrobat.

Hi Kate,
Please refer to this KB doc. for the solution Application, file icons change to Acrobat/Reader icon
Let me know if the issue persist.
Regards,
Aadesh

Graphics in FrameMaker 9 lost when converted in Adobe Acrobat 9 Pro

Since upgrading to FrameMaker 9, some graphics that appear fine in FrameMaker become black boxes in the PDFs created by Adobe Acrobat 9 Pro. By finding the original graphic and reimporting it, the problem is solved, but the original graphic is not always available. Is there any other workaround to this problem created by the software? Suggestions would be gratefully appreciated!

I use Save As PDF (book). When I print to PDF, I don't get the problem (but I don't get the bookmarks)
I think you find in many places on this forum that the best practices for making a PDF is to print to the Adobe PDF printer, either directly or indirectly (saving the ps file and distilling with Distiller). It is my understanding that there are problems with Save As PDF.
In any event, you should be able to get bookmarks by printing to Adobe PDF printer. In the Print dialog, select Generate Acrobat Data and click PDF Setup. In the PDF setup dialog > Bookmarks tab, select Generate PDF Bookmarks and select the formats to bookmark. It is the same dialog that displays when you do Save As PDF.
Because your graphics are COPIED into the Frame files, I know of no way to get them out again from the Frame file. That is why I always import graphics by reference, so that the original graphic is always available if needed for editing or reimportation.
If you absolutely need a graphic file AND the Frame to PDF workflow is working properly, you can always create the PDF for the page with the graphic (turning OFF all resampling and compression). Then open the file in Illustrator and delete all but the graphic; then save as PDF or eps. Or open the PDF in Acrobat Professional and export the image (if a bitmap) or delete all but the graphic and save as PDF.

Text cut of on very bottom of page when I print - Photosmart 6520; Macbook Pro

I don't know what's going on, but when I print two-sided from a word doc on my mac, the the lower half of the text at the very bottom of each page cuts off. Can anyone help me fix this problem? I'd really appreciate it.

Hi bkflores32,
Thank you for visiting the HP Support Forums! I see when you print a 2 sided document from Word to your HP Photosmart 6520 it cuts off the lower half of text on the bottom of each page. I would first like us to make sure it is not the hardware, please print out the 2 page document as single pages, now I want you to make a 2 sided copy. Does this cut off the bottom text or does this come out with no print quality issues?
If the copy comes out fine, please let me know the following:
1. What is your current Mac OS X?
2. Did you recently upgrade your Mac OS X?
3. Are all Apple updates installed and up to date?
I look forward to hearing from you.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Printing Problems wtih Adobe Acrobat X Pro

I am having problems printing Adobe Acrobat X Pro forms. When I try to print, information entered into text fields will not print.

Since it just appeared to happen with the latest update of Acrobat 10.1.2, can you check to see if it's related to any of these known issues?
http://kb2.adobe.com/cps/928/cpsid_92870.html

PDF prints from Acrobat 8 Pro, but not from Acrobat 9 Pro

I have a PDF that prints fine when I print from Acrobat 8 Pro, but when I open the same PDF in Acrobat 9 Pro, only portions of each page actually print out.
All systems running Windows XP Pro, SP3
A8P 8.1.2
A9P 9.1.1
Any ideas?

Well, for those following this thread or needing a solution, I found a work-around though I'm still not sure why the initial problem exists.
In Acrobat 9 Pro, once you have the main print dialogue box open, follow the steps below:
1) Click ADVANCED
2) Select PRINT AS IMAGE
3) Set DPI to 300
4) Click OK
5) Make any other typical print setup adjustments as you normally would and finish printing as usual

Is Adobe Acrobat X Pro seems to be a downgrade

Adobe Acrobat X Pro does not have the editing features I need. Did I just overwrite my more upgraded version of Adobe Acrobat when I downloaded Adobe Acrobat X Pro from the Creative Cloud? Please advise.

I'm moving this thread over to our download/installation forum.
For general Creative Cloud Membership questions, here is the FAQ link:
http://www.adobe.com/products/creativecloud/faq.html
-Dave

When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background. i am on a Windows 7

When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background.
i am on a Windows 7 professional PC, 64-bit.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Adobe Acrobat 9 Pro Extended, Version 9.5.0, crashes when printing

Hello,
Adobe Acrobat 9 Pro Extended, Version 9.5.0, crashes when printing:
Problemsignatur:
Problemereignisname:    APPCRASH
Anwendungsname:    Acrobat.exe
Anwendungsversion:    9.5.0.270
Anwendungszeitstempel:    4f03f71d
Fehlermodulname:    Acrobat.dll
Fehlermodulversion:    9.5.0.270
Fehlermodulzeitstempel:    4f03f251
Ausnahmecode:    c0000005
Ausnahmeoffset:    006ccadd
Betriebsystemversion:    6.1.7601.2.1.0.256.1
Gebietsschema-ID:    1031
Zusatzinformation 1:    0a9e
Zusatzinformation 2:    0a9e372d3b4ad19135b953a78882e789
Zusatzinformation 3:    0a9e
Zusatzinformation 4:    0a9e372d3b4ad19135b953a78882e789
Thank you very much for your help.

I do have the same problem but I'm OSX 10.6.8
I have a Phaser 7500, and it works fine with ID, PS, AI, and Acrobat Reader 9.5
But crashes with Acrobat Pro 9.5 and Lightroom 3.6
Latest drivers for the Phaser in installed, tried the Repais Acrobat Installation but
it' says it isn't necesary
Process:         AdobeAcrobat [6142]
Path:            /Applications/Adobe Acrobat 9 Pro/Adobe Acrobat Pro.app/Contents/MacOS/AdobeAcrobat
Identifier:      com.adobe.Acrobat.Pro
Version:         9.5.0 (9.5.0)
Code Type:       X86 (Native)
Parent Process: launchd [178]
Date/Time:       2012-01-23 17:35:51.285 +0100
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          573578 sec
Per-App Interval Since Last Report: 318700 sec
Per-App Crashes Since Last Report:   1
Anonymous UUID:                      2FBD03A6-9A6E-407D-B683-2DA98F1D700F
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000030000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread

Adobe Acrobat 9 Pro do not open when printing a pdf document. Can anyone help?

Adobe Acrobat 9 Pro do not open when printing a pdf document, instead I open it with Adobe Reader X to be able to print.
Can anyone help?

Hi Edna,
It sounds like Adobe Reader X is your default PDF file handler. Launch Adobe Reader X. Choose Edit > Preferences > General. Click the 'Select Default PDF Handler' button at the bottom and choose Acrobat 9 from the drop-down menu. Click Apply, then OK.
Restart your computer. Acrobat 9 should now be your default PDF file handler again.
-David

How to setup a four page PDF in Adobe Acrobat 9 Pro to print only one of four pages?

Hello,
I have a request from a end-user to setup a four page PDF in Adobe Acroat 9 PDF to only allow printing of one specific page of the four page PDF.
The end-user will abe able to view the four pages in the PDF - however - the PDF would only allow printing of one page. The PDF would need to be pre-set for the end-user. Is there a setting Adobe Acrobat 9 Pro to allow this type of specific pre-set printing.
I appreciate your help. I hope to hear from you soon.

No, Acrobat can't do that.

I want to reinstall our Adobe Acrobat XI Pro because we have begun to get error messages. I followed the initial instructions but when I logged in I couldn't find "My Orders" page which is required to locate my order and install. Any ideas?

I want to reinstall our Adobe Acrobat XI Pro because we have begun to get error messages. I followed the initial instructions but when I logged in I couldn't find "My Orders" page which is required to locate my order and install. Any ideas?

Barbara,
If you are looking for your serial number, sign in to your Adobe account. On the Manage Accounts page that appears, all of your registered products and their serial numbers are listed in the Plans & Products section. For more information on locating serial numbers,please see Find a serial number
Here is the link to download and install the software:
Acrobat XI, X
Pattie

Gray becomes green when a Adobe 8.1.0 PDF is printed with Acrobat 9 Pro ...?

Hello,
when the PDF file which was created with Adobe 8.1 is printed with Adobe Acrobat 8 Pro the gray is as it should be.
If the same file is printed to the same printer (same settings) with Adobe Acrobat 9 Pro on another Workstation in the same office the gray becomes kind of green.
I noticed the grayscale Option in the Adobe Acrobat 9 Pro was set to Dot Gain 20% instead of Gray Gamma 2.2, so i changed it but the gray still gets printed as a green.
I really would appreciate any help!

Martha:
Acrobat 9 installation is fraught with problems. All four writers who tried to install it at one customer location had problems getting the A'9 to work properly after installation -- and the problems were all slightly different.
And so too were the responses given by Adobe support. In one case A'Support recommended running a cleanup tool, in one case it insisted that the program should install with the same serial number as the Tech Comm Suite that putatively includes A'9, and in another case it simply "punted" and gave the I.T. folks a new, separate serial number to circumvent the otherwise unresolvable installation problems.
Apparently we can add sending people with A'9 problems to the FrameMaker forum to that list...
Cheers & hope this helps,
Riley

When installing adobe acrobat 11 pro it stops at stopping printer spool nad I get error 1921?

When I try installing Acrobat 11 pro it stops at stoppimg print spool and I get error 1921.

Try the forum for Adobe Acrobat.

When I open Adobe Acrobat, the menu onthe left is always set to 'Layers'. I have tried to change it to 'Pages' without any luck. Can anyone suggest a fix?

When I open Adobe Acrobat X, the menu on the left is always set to 'Layers'. How can I change it to always be set to 'Pages'?

Most of the time you see something like that. The image in question has a color profile other then sRGB. Some image viewers/displayers are color managed and others are not. So the image do not look the same in all of the applications you use. So colors seem to change.
Try converting it to sRGB color and see if then looks the same all around. Also I think PC and Mac displays are set to different gamma something like 1.8 and 2.2
Though I'm colorblind I even see color variations.

Rotating pages when double-printing Adobe Acrobat XI Pro

Similar Messages

Maybe you are looking for