Rotating video clip but losing audio?

this is my situation:
i took a video clip with my digital camera vertically instead of horizontally. so when everything on my camera was imported to iphoto that video clip was imported as a quicktime video. now im trying to figure out a way to rotate the vertical clip so that i dont have to turn my head 90 degrees everytime i watch it. in trying to figure out how to do that, i found an apple download called MPEG Streamclip. That allows me to rotate the clip however two things happens:
1) the audio is no longer there (the output volume is turned all the way up on the macbook... i promise. i checked at least a dozen times)
2) the video is now cropped weirdly so that the height is equal to the original width of the vertical video.
help? ive never used imovie before or any of these programs... i just want to enjoy my video...

Here are the instructions for using Streamclip.
You need to be sure to Export to DV--that should prreserve your audio. Before you Export to DV from Streamclip, Set the Zoom to 75% to preserve your dimensions.
Here's how to do it. Put the video clip into iMovie. Export the unrotated clip from iMovie to your desktop as a Full Quality Quicktime movie. Open the Quicktime Movie with Streamclip. From the Streamclip file menu, select Export to DV. When you do that, a panel will open up giving you choices to rotate (i.e., 90%CW (clockwise), etc.) Select the rotation you want. Set the zoom to 75%. Then export the .dv to your desktop and drag the rotated clip into your iMovie project. I have rotated several video clips in this fashion. I understand that you can rotate clips with Quicktime Pro, too, but I have never done it that way (because I don't have Quicktime Pro).

Similar Messages

I added background music to the video clip, but I only hear noise, no video clip audio or the background music audio

I added background music to the video clip in iMovie, the playback runs ok on the right corner preview screen, if I share it to movie clip or itunes or theather, I only hear noise, no video clip audio or the music audio
If I don't put additional audio to the clip. audio effect or music background, the video plays normally
I detached the audio from the video clip and deleted it, that way it was possible to listen to the music background and see the actual video clip, but no audio from the video clip.
How can I have both?

Hi
My first thought is -
Where are the original Audio file ?
If it was on an Audio-CD then the CD is Ejected and one tries to play the movie - it can not find it = Silence.
You are using an Non-Destructive Video editor - meaning that You have raw material - Video, Audio and photos but no Movie in Project - only a text document directing How You want it to be played. So if Audio is not where it was when this document were created - iMovie can not find it and e.g. audio goes silent.
Yours thinking - Bengt W

Can you keep the audio of one video clip but add another clip?

Can you keep the audio of one video clip but add another clip?
I want to edit in other clips during an interview with a person, but have the interviewee's voice in the background?

There are several way to do this;
Replace with clip...
http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d27a .html#WSA009AFF1-4D78-43cc-B60D-5B46E5ACB117

I'm a new user and learning, I bought and installed Premiere Pro cs6. I got a nice video clip but has a baby cried in the background and very annoying. My question is, is this noise remover is separate from the cs6 or I need to get this software downloa

I'm a new user and learning, I bought and installed Premiere Pro cs6. I got a nice video clip but has a baby cried in the background and very annoying. I have tried all of the sounds in Prem cs6 but didn't work. My question is, do I need to get a separate sound software download and install to be able to use it?

In the CS versions, there was some audio capability in PrPro but you needed to get a separate audio program for major work. Lessening a baby definitely qualifies as major work. That's lessening, i dont mean eliminating. Adobe's audio program is Audition. There are others "out there'. In the CC versions one just downloads Audution also.
Neil

Does version 12 support producing video clip with AMR audio codec?

From some documents i used as reference to proceude some videos for my phone Premiere Elements 8 can produce video clips with AMR audio codec. I bought today the Premiere elements 12 but I can not find a way to set AMR audio codec for my video clip. Only AAC audio codec seems available. Is it possible to add AMR codec to 12 version?

Neurona17
Adobe typically supports only current version, and, if you purchased from it, is strict on "within 30 days of purchase": for money back on that current version purchase. I do not believe such a thing as a "change the license for other earlier release such as 8 or 9" exists at Adobe. But, you could ask. If you wish to purchase one of those earlier versions that supports AMR export, you might still find some online.
Is the before import conversion of AMR to WAV a viable alternative?
You wrote
Unfortunately so far I have not been able to generate any useful video clip for my system with this 12 version.
Is this in regard to the AMR requirement or to any video without the AMR audio?
Online I have seen that there is a download for the AMR audio codec. Does your system now show that you have such a codec installed on your computer. If not, I am not sure if download of this codec would place it in the Premiere Elements Publish+Share export settings choices, similar to import of some .avi video codecs. (Sometimes 3rd party codecs can create problem, so proceed with caution if you pursue that AMR audio codec idea.
Please update us on your progress when you get a chance.
Thanks.
ATR

Video plays but no audio. Help!

I have a 2011 MacBook Air with the proper configurations and Mountain Lion. I am trying to take an online course. The video plays but no audio. I have tried all the suggested fixes, but nothing works. Everything else works on my computer with no problem. I need help fast. Any ideas or known issues?

Sorry, I read the forum rules . Thanks for the reply, but I haven't actually updated the Nvidia drivers in a while. Right now they are on 311.06. I keep them at the stock clock speed as well. Also have a slightly overclocked i5 2500k. but that never effected Adobe products before.
I wonder, does VLC Player at all affect clip playback? I think I saw there little traffic cone.
Yup. Is PP CC using VLC instead of Quicktime? And/or would that have an effect on playback? Also how would I correct that? I imagine uninstalling VLC would.
Well, I uninstalled VLC, and now the Quicktime logo shows up just before the thumbnail loads instead of the VLC logo. I'm gonna assume that means that PPCC is using quicktime, but I STILL get no video in preview playback!
Starting to get frustrated.

How come when I view flash videos my videos stop, but the audio plays and I see rainbow colored lines up and down the video.

How come when I view flash videos my videos stop, but the audio plays and I see rainbow colored lines up and down the video. I attached a image below.

ATR, just to make sure you understand me, all my video clips in my folders appear as the first frame of the video clip when I view my folders as (small, medium, large)icons instead of lists, when saved as .avi files but when saved as .mp4 files, those icons display as a graphic icon of filmstrip with a musical note on it. I do have various other methods to open with (quick time, windows media, winamp or real player) but prefer real player because I like it's quick and easy trimmer that comes along with it, since so many of my videos are just pet antics where you need to clip off the boring beginning and ends of the video.
I did go on a few of the icons and right clicked, Open With, and tried quick time and also Windows Media and it did nothing as far as how the file was saved for display, and they opened the same no matter which player I used...the actual video opens and plays right at it's first frame... but it's the way it is visually displayed in STORAGE that bugs me because it isn't immediately apparent to me what it is a video of (weddings, outside the house, pet antics)... it makes me have to actually title things and read titles where before I let it just be dates because I had the visual of that first frame as a reference. Obviously, this is a problem for unedited videos only, as anything I actually work with, I do give a title along with the date of the video.
I also just realized this seems to be the way ALL videos that are wrapped in .mp4 are displayed, as my bloggie camera's videos appear the same way. Now I know why! My other videos display as .avi's so I see the frame. Puzzle solved. Guess I'll just have to learn to live with it, as it seems to be how things display with the various formats.
Now I need to watch some tutorials to learn how this Premiere program works! It's all new to me, since this is the first time I've been able load any of my videos onto it. I haven't even been able to figure out how to trim on it yet!

Using time remapping w/AE CS4 to freeze time/video freezes but not audio

Ok I do alot of editing of sports. One thing I like to do is freeze the moment when a special play is about to happen, highlight the player (via masking), then resume play. I had no problem with this in CS3. Now when I use the same workflow in CS4 the video freezes but the audio doesn't. So when I play it back I see the video freeze BUT the audio is still playing...hence now my audio is not synced up with the video. Didn't do this in CS3. My workflow: from PP -rightclick clip- replace w/ AE comp- AE loads my clip in a comp- I enable time remapping- extend the duration of the comp by 5 sec- find the point I want to freeze-set a key frame-copy key frame to origninal position- now I have a 2 second freeze between 2 keyframes. When I check the comp in PP the video freezes where I want it to but the audio keeps playing during the freeze....even after render. Thoughts?

Hi,
I'm also having the same problem with CS4 version. I'm using Mpeg4 file shot on my canon 60d and it's freezing the video in places and continuing the sound. The whole clip is just over 2 mins and I don't have any effects at all.
Does anyone know how to solve this please???
Cheers!
Shan

I was having problems with video and audio on certain sites like youtube. I edited some settings in Realplayer and have video now, but no audio.

Went into preferences on Realplayer, Download and recording, then unchecked "Enable Web Downloading and Recording...". That got video going, but no audio still. (Interesting that the list of browsers below that check box did NOT include Firefox.

See:
*https://support.mozilla.org/kb/flash-113-doesnt-load-video-firefox
You can also try to clear the Flash local storage and settings.
*Windows Control Panel > Flash Player, click Delete All and Delete Data
Flash Website Storage Settings panel:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
Global Storage Settings Panel:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html
Did you also check the setting in the volume mixer when Firefox is using the flash plugin?
*https://support.mozilla.org/kb/No+sound+in+Firefox

Rotate Video Clips in iMovie

I am fairly new to this whole operating system, and while it works 5million times better than what I'm used to, there are still several kinks in the system that I need a bit of help working out:
I recently took a video on my digital camera that was oriented sideways. Consequently, when I try to watch it on my computer, either in Quicktime or in iMovie, it plays sideways. Is it possible (Without spending thirty dollars to "go pro" in Quicktime) to rotate my video clip 90 degrees so that I can watch my movie in its proper orientation?

Hi Lauren,
welcome to this forum
you HAVE to spend money you can pay Apple (to buy QTpro), or
www.geethree.com
www.stupendous-software.com
any maybe others, google for "iMovie plug-in"
free is the mind, but not software

Problem Synchronizing Multiple Video Clips to One Audio Clip

So i recently shot some video for a cool project I have coming up however I am having issues with Synchronizing the Audio and Videot together in Final Cut Pro X. I have used Final Cut Pro X since Day 1 that it came out and I thought I had a pretty good grasp on how Synchronizing Clips and MultiCam worked. I record my audio separately so in the past I would start recording on the TasCam Recorder (Wireless lav set up) I have, start recording on the DSLR and end up with both a video and audio clip. I would take these into Final Cut Pro and highlight both and use the "Synchronize Clips" command to pair them both into a single clip and then turn off the natural audio from the DSLR and begin my cuts. I thought I had done this with multiple clips before without issue but I seem to have a problem now.
Yesterday I shot 50 interviews. I pressed record on the Audio Recorder in the beggining and let it run for the full 2 hours, giving me one long audio file. Instead of wasting video space on my CF Card, I started and stopped recording for each of the 50 interviewees. My goal and what I thought would work was to highlight all 50 video clips and the 1 audio clip and say Synchronize Clips. This did not work. Upon looking at the Synchronize Clips in depth, i noticed that it synched all of my video stacked in the beggining in the first couple minutes. It didn't sync all of my clips, it merely just put them in the same timeline all up front.
I then tried to highlight all and do the same thing with MultiCam, however thought it matched a few more clips, it still had an issue of not synching the way I was hoping for.
I was wondering if anyone has had this issue in the past and what they might have done to fix it. Does FCPX have a limit on the number of clips it can Synchronize? Does anyone have any ideas for workflow for synchronizing all of these clips? In the future upcoming shoots should i resort back to starting and stopping audio recording the same way I start and stop video recording and then pairing individual interviews later?

So i just read this in the support for FCPX
Final Cut Pro analyzes the clips for sync points such as markers you’ve added, timecode, file creation date, and audio content. If no sync points can be found, the clips are synced at their respective starting points.
This is what I am aiming for , however not what I am getting. The piece about how the clips sync via timecode, markers, and creation date/time intrigue me though. There is no timecode cause my external audio is just a wav file, but maybe I can get it to sync better via markers? Has anyone else had this issue? Maybe my audio file being close to 2 hours is too long?

Dragging video clips down into audio clips territory??

Now this is intriguing.
I didn't even think it was possible. Seems like this editor has dragged video clips down (at least one track down, if there were tracks) below the line I always assumed was VIDEO ABOVE, AUDIO BELOW. So this film has a whole bunch of video clips below the storyline. And we can still see them. I couldn't quite figure out her logic, though I'm sure it's legit, she's a great filmmaker ... she wanted to be able to remember (by seeing, even though they are invisible to the timeline) chunks of certain clips, interviews, that she wasn't using currently, but that she might want to use later.
But what might be the Apple logic for being able to do this? Very curious.
Ben

Thank you Tom.
Very interesting. Now I can try to imagine how I can use this ... I'm enjoying X, after initially hating it, now if only for the fact I keep being surprised by it.
Very much appreciated,
Ben

Sync multiple video clips with one audio track

I'm an FCPX noob, trying to sync some clips. I recorded a 1.5 hour concert with a DSLR along with an audio track using a separate digital recorder. I have seven video clips, all in sequence (stopping and restarting the camera because of clip length limitations) and one long audio track in WAV format. The audio track is longer than the combined video clips, and there are some short dead spaces in between the video clips when I turned off/on. Now I'm trying to sync them but when I do, the video clips get stacked together with lots of overlap.
I made a test with 3 minute video and audio clips and had no problem. But when I try to do the whole event, I get a jumbled mess.
I could cut the audio into pieces and sync each piece with its corresponding video, but that seems to defeat the sync process, as well as being a lot of work. And, wouldn't I end up with lots of overlap anyway, since my audio clips would have to be longer than my video clips?
Am I missing an easier way to do this, or a way to arrange things better? I can't imagine the problems with several cameras and several audio tracks; my project is actually pretty simple, since it is very linear.
Any suggestions? Thanks--

BobFromIN wrote:
Sorry to take so long getting back to you. Thank you for this advice, but I'm not sure I'm doing it correctly. Is there a way to set the angle on all of the clips at the same time?
Yes. Select all the clips you want in the browser, and then in the inspector fill in the camera angle with the value you want. This can be just about anything, it does not have to be a number. I prefer to name it something meaningful, like "wide" or something.

Trying to organise video clips but can not find them in iphoto under Movies but do appear idvd under movies.How can I get into iphoto movies section to edit and organise the video clips

In iphoto '08 in my Library section "Movies" doesn't show as a seperate folder so to find my video c;ips I have to go through 13,000 photos and yet in iDVD they do show up in the media area. How can I edit them and put them into specific files?

Tell me if a video has been recorded on its side! or even upside down, can you turn it round the proper way?
If you have Quicktime Pro you can rotate the video. There's a plugin for iMoive that can rotate clips. Go to MacUpdate.com and do a search for "rotate video" and you'll find several apps that can do the job and the plugin: MacUpdate: Search for '+rotate +video'
OT

Need to remove video clip and save audio track.

We are trying to remove a segment of video clip and save the audio track that goes with it. We intend to fill that open segment with transitions of still photos, all the while allowing the narrator, who has now been "clipped" to keep speaking.
We are using CS3 Premier Pro.
Any advise would be greatly appreciated! Thanks for your wisdom...
Mary M.
Yellowstone National Park.

Mary,
I find that just Alt-clicking on the Video and hitting Delete to be the quickest method. That does exactly the same as Unlinking, with two keystrokes - Atl-click Video, Del key.
Hope that helps,
Hunt

Rotating video clip but losing audio?

Similar Messages

Maybe you are looking for