Rotation de la video une fois importée sous elements p. 8

bonjour,
peut-on tourner la video ( ou une section ) d'un quart de tour dans la fenêtre  ligne de montage une fois sélectionnée
merci

Cliquez avec le bouton droit sur le clip sur l'axe temporel et sélectionnez Propriétés. Ouvrez la Motion propriétés et définissez la Rotation à 90 degrés ou - 90 degrés.

Similar Messages

  • Pourquoi une animation responsive (en% par rapport à la fenêtre) fonctionne dans le preview de Edge et ne marche plus une fois importée en .oam dans MUSE ?

    Pourquoi une animation responsive (en% par rapport à la fenêtre) fonctionne et s'adapte à la bonne taille dans le preview de Edge et ne marche plus une fois importée en .oam dans MUSE (taille fixe) ?
    Merci à la communauté

    Illustrator CC uses the Pantone Plus series, there is no CMYK definition for the spot colours in these series.
    The CMYK conversion is now based on the CMYK profile in your Color Settings.
    This is a good thing, since most of the Pantone colours cannot be accurately reproduced in CMYK, colour management provides a way to simulate the spot colours as close as possible for your combination of ink, paper and press.
    The CMYK values that were previously given by Pantone were just one way of simulating the spot colours and would give different results when another ink, paper, press combination was used.
    Sometimes the CMYK values from Pantone were completely off and you give a perfect example with the Pantone 1797 U colour.
    Printing that ink on uncoated stock would never give you such a bright saturated red as the Pantone provided CMYK values would suggest
    If you want to have a better preview of the colour, use the Overprint Preview option, that comes closer to the final printed result. The Overprint preview in CC and CS versions give s you an almost identical preview (almost because the Lab values differ slightly).
    There are ways to use the old libraries, but why should you if Pantone itself stopped giving CMYK numbers?

  • Les hyperliens d'une animation en .oam (Edege Animate) ne marchent plus une fois importée dans Muse

    J'ai réalisé une petite animation dans Edge animate avec un lien vers un URL  sur une des images (action > clic). Tout marche parfaitement dans Edge animate.
    Une fois le fichier .oam (généré par Edge) importé dans Muse, l'animation se joue bien mais les hyperliens réalisés dans Edge animate ne fonctionnent plus, lorsque que je prévisualise la page ou le site dans n'importe quel navigateur.
    Y'a t il une solutions pour que les hyperliens qui fonctionnaient dans edge animate se jouent une fois le .oam importé dans Muse ? Merci à toutes les bonnes volontés qui peuvent résoudre ce problème

    J'ai réalisé une petite animation dans Edge animate avec un lien vers un URL  sur une des images (action > clic). Tout marche parfaitement dans Edge animate.
    Une fois le fichier .oam (généré par Edge) importé dans Muse, l'animation se joue bien mais les hyperliens réalisés dans Edge animate ne fonctionnent plus, lorsque que je prévisualise la page ou le site dans n'importe quel navigateur.
    Y'a t il une solutions pour que les hyperliens qui fonctionnaient dans edge animate se jouent une fois le .oam importé dans Muse ? Merci à toutes les bonnes volontés qui peuvent résoudre ce problème

  • Les hyperliens d'un fichier .oam (edge animate) ne marche plus une fois importé .dans Muse

    J'ai réalisé une petite animation dans Edge animate avec un lien vers un URL  sur une des images (action > clic). Tout marche parfaitement dans Edge animate

    J'ai réalisé une petite animation dans Edge animate avec un lien vers un URL  sur une des images (action > clic). Tout marche parfaitement dans Edge animate

  • Pourquoi les hyperliens réalisés dans Edge animate ne fonctionnent plus dans Muse, une fois le fichier Edge .oam importé dans Muse ?

    Pourquoi les hyperliens réalisés dans Edge animate (action sur une image>clic>lien>url) ne fonctionnent plus dans Muse, une fois le fichier Edge .oam importé dans Muse ?
    (Dans Muse, l’animation se joue, mais les hyperliens réalisés dans Edge ne fonctionnent plus, alors qu’il fonctionnaient dans l’aperçu du navigateur de Edge.).
    Y’a t-il une solution ? Merci aux bonnes volontés.

    Thanks very much Vivek for your help. wahou ! It’s work. great !
    Un grand merci.
    Le 16 févr. 2015 à 13:49, VivekPassan <[email protected]> a écrit :
    Pourquoi les hyperliens réalisés dans Edge animate ne fonctionnent plus dans Muse, une fois le fichier Edge .oam importé dans Muse ?
    created by VivekPassan <https://forums.adobe.com/people/VivekPassan> in Help with using Adobe Muse CC - View the full discussion <https://forums.adobe.com/message/7198771#7198771>
    Hello,
    I believe you are facing the similar issue as mentioned in the thread below. I am sure suggestions there will help you overcome the problem.
    I created a interactive navigation in edge animate and imported that in muse. The animations works fine, but the interactivity doesn’t work. ((for example if I click on the "home-Button", that site doesn’t open in my browser as it should be), Does anyone <https://forums.adobe.com/thread/1547404>
    Regards
    Vivek
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7198771#7198771 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7198771#7198771
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Help with using Adobe Muse CC by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 61>
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

  • Pourquoi les hyperliens d'une animation Edge Animate ne marchent plus, une fois le fichier en .oam importé dans Muse ?

    J'ai réalisé une petite animation dans Edge animate avec un lien vers un URL  sur une des images (action > clic > lien). Tout marche parfaitement dans Edge animate.
    Une fois le fichier .oam (généré par Edge) importé dans Muse, l'animation se joue bien mais les hyperliens réalisés dans Edge animate ne fonctionnent plus, lorsque que je prévisualise la page Muse ou le site dans n'importe quel navigateur.
    Y'a t il une solutions pour que les hyperliens qui fonctionnaient dans edge animate se jouent une fois le .oam importé dans Muse ? Merci à toutes les bonnes volontés qui peuvent résoudre ce problème

    J'ai réalisé une petite animation dans Edge animate avec un lien vers un URL  sur une des images (action > clic > lien). Tout marche parfaitement dans Edge animate.
    Une fois le fichier .oam (généré par Edge) importé dans Muse, l'animation se joue bien mais les hyperliens réalisés dans Edge animate ne fonctionnent plus, lorsque que je prévisualise la page Muse ou le site dans n'importe quel navigateur.
    Y'a t il une solutions pour que les hyperliens qui fonctionnaient dans edge animate se jouent une fois le .oam importé dans Muse ? Merci à toutes les bonnes volontés qui peuvent résoudre ce problème

  • Can I use Apple DVI to Video Adapter to import video to my macbook pro?

    I was wondering if i could use the Apple DVI to Video Adapter to import videos from my camcorder that don't have usb or firewire but have a S-video. to my laptop? and import them to iMovie

    Welcome to the Apple Community.
    If you mean without internet, then yes, providing it isn't a purchased video (The Apple TV may need to verify authorisation). If you mean without a network, then no.

  • How do i see video clips already imported in to an event?

    How do i see video clips already imported in to an event?
    I have already created and shared one movie project from the clips and from photos but now want to make another. However, when i go to the library it only shows me the content of the first project, including the photos, not all of the video clips i originally imported. I can't believe that I need to import them all again.

    It seems to me that you must have imported your clips using iMovie 9, (that's why they are all in the Events folder which belongs to iMovie 9).  Then you must have upgraded your current project to iMovie 10 which will have put the clips used in that project (but not all the others) into your iMovie 10 library.  iMovie 10 has a totally different storage arrangement for media.  You should be able to update your other iMovie 9 projects by choosing File > Update Projects  and Events in iMovie 10.  See: http://help.apple.com/imovie/mac/10.0.8/#/mov902ad0c31
    This does not stop you from continuing to use the projects in iMovie 9 though any further editing you do will not be transferred to the other version of iMovie.
    Geoff.

  • I have lost my photos/videos when i imported from my ipad 2 to my new imac latest version and it's not reading the files.  I have downloaded iMac library manager and can see them. can someone shed some light please ?

    i have lost my photos/videos when i imported from my ipad 2 to my new imac latest version OS X 10.8.4
    and it's not reading the files.  I have downloaded iMac library manager and can see them.  when i go back into iphoto i'm getting the following message :
    Do you want to switch the current iPhoto Library from “iPhoto Library.photolibrary” to “iPhoto Library.photolibrary” and relaunch iPhoto?
    I don't know what to do - please help !!!!
    can someone shed some light please ?

    So it appears you have only one library on the hard drive. Apply the two fixes below in order as needed to that library:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

  • Can't select multiple video clips to import into iMovie

    Hi, i can't select multiple video clips to import into iMovie, it only lets me import one video at a time. Apple please fix in next update or if anyone has a solution please post.

    Obviously you can not select the video to import until after iMovie populates the list of videos that are available to be imported
    LN

  • 24 minute video did not import

    this and another video did not import. all the regular photos did.
    video from another camera imported a video earlier so I know its working.
    did not get any error message that the file was too big, etc.
    Ideas as to why the videos did not import? File too big? If so, how to fix?
    The videos are on a card on a Nikon Coolpix camera.

    thx. most videos taken are 1-3 minutes. One of the kids cranked out a long video and no one knew what to do about it. Never knew about image capture. Thx for the help. All the vids downloaded fine as you instructed.

  • Rotate and edit videos

        Im searching for a good app to rotate and edit videos I've taken. Im affraid to purchase any of them I get in search. imove and rotate HD came up. I go upon the rating but looking at them it seems the developers of those apps rate them to make them look better. When I actually read and research the apps they arent that great and have a lot of flaws.  I dont want to waist the time and money. From the looks of it all Apple doesnt test these apps thoroughly, which is ashame. Does anyone have any real suggestions?                                       

    Phoenix Mirage wrote:
        Im searching for a good app to rotate and edit videos I've taken. Im affraid to purchase any of them I get in search. imove and rotate HD came up. I go upon the rating but looking at them it seems the developers of those apps rate them to make them look better. When I actually read and research the apps they arent that great and have a lot of flaws.  I dont want to waist the time and money. From the looks of it all Apple doesnt test these apps thoroughly, which is ashame. Does anyone have any real suggestions?                                       
    Rediculous comment, even from a Windows user.
    For an Apple user this is easy, as described below. For Windows please ask the question on a Microsoft forum.
    You can do this using Quicktime Pro 7:
    Open MOV file in QT Pro (QT 7.6.6)
    Window -> Show Movie Properties
    select "Video Track"
    select "Visual Settings" from lower window
    check "Preserve Aspect Ratio"
    Click on appropriate rotation icon (MOV rotates!)
    Click back on the open MOV in Player Window
    FILE -> Save
    You can also do this using TransformMovie, available here:
    http://www.macupdate.com/info.php/id/21859
    Also, MPEG Streamclip can rotate video while maintaining the aspect ratio as well as the interlacing when converting to DV, which is what iMovie prefers as an input:
    http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
    There is also a plug-in for iMovie from GeeThree called rotate/scale that might do the job:
    http://geethree.com/slick/index.html
    Further useful information here:
    http://www.sjoki.uta.fi/~shmhav/SVCD_on_a_Macintosh.html#vert-horiz_rotate
    http://www.sjoki.uta.fi/~shmhav/SVCD_on_a_Macintosh.html#43-169

  • Why won't my video won't import into iMovie. There is a red ERROR message underneath clip.

    I just imported 40 out of 43 clips of HD video from my JVC HD Everio camera into iMovie '11. It's my first time using either equipment for editing. I selected import all but only 40 of the clips successfully imported. 3 of the clips were not able to be imported but I can still play the clips fine from the import window. The clips all have red error messages underneath them. This is an issue that I've seen posted other places online but it doesn't seem to be resolved. It's very frustrating for me, I've been researching online to try to fix this for hours now. The closest I have come to a solution involved deleting extra 3rd party plugins from my quicktime folder however I don't have a folder named "Quicktime" in my Library. So I don't know what to do. Please help!

    The error message appears under video clips already imported into iMovie. Like in this screenshot http://km.support.apple.com/resources/sites/APPLE/content/live/VIDEOS/0/VI57/en_ US/imovie-start-poster.jpg on my mac out of the 6 clips shown per row, only 5 of them have the word "imported" underneath them in white letters and then one of the clips has the word "error" underneath it.
    I don't think it's a corrupted file because yeah I can play the three clips just fine. The page that I read that had that fix in it (deleted plugins) was here: https://discussions.apple.com/thread/1893021?start=0&tstart=0 The correct answer is near the bottom of the page and was posted by iphonejunky. Maybe the fix would be that simple but like I said, I can't find a folder named quicktime in my library. I don't know if I'm just stupid or what.
    I don't think I have Flip4Mac installed because I never consciously installed it. I use VLC for playing most video. The clips imported are all .mov

  • I move my videos from camera roll to a new folder. After i turn off & on my phone, the videos disappears. The videos are very important to me. Please please help. how can i retrieve?

    i move my videos from camera roll to a new folder. after turn off & on again my phone, the videos disappears. the videos are very important to me. Is there any way i can retrieve it? please please help. thanks.

    Photo Stream is not a backup.
    Photo Stream has a limit so is temporary.
    iTunes does not handle the import of photos/videos from any digital camera including from the iPhone's Camera Roll.
    Photos/videos in the Camera Roll can be imported by your computer as with any other digital camera.

  • Bonjour, j'ai téléchargé Adobe photoshop CS6 sur mon ordinateur, quand j'ouvre le fichier on me demande de télécharger Adobe application Manager. Une fois les deux télécharger , la mise à jour d'application manager faite aucune fenêtre s'ouvre. Puis quand

    Bonjour, j'ai téléchargé Adobe photoshop CS6 sur mon ordinateur, quand j'ouvre le fichier on me demande de télécharger Adobe application Manager. Une fois les deux télécharger , la mise à jour d'application manager faite aucune fenêtre s'ouvre. Puis quand j'essai d'ouvrir photoshop pour l'installer une fenêtre adobe application manager s'ouvre qui dit: ECHEC de la mise à jour . les mises à mou n'ont pas pu être appliquées. ce correctif ne s'applique pas à votre cas. Rechercez les mises à jour disponible à partir du menu aide de votre produit pour consulter la liste des dernière mise à jour. Sauf que comme je vous l'ai expliqué , je n'ai aucun menu puisque que je n'arrive pas à installer photoshop .
    merci

    Bonjour,
    Ce forum ne concerne pas Creative Cloud.
    Merci de publier votre question sur le forum suivant: http://forums.adobe.com/community/creative_cloud

Maybe you are looking for

  • Posting customer invoice

    Hi All, I am trying to post customer invoice , i am getting the following error G/L account requires CO account assignment object. I do not want to give any cost center as it is a revenue posting. I tried checking the field status group attached to G

  • Message determination for PO auto email

    Folks, Have set up a condition record MN04 for setting up an email message. for a. Doc. type b. POrg c. Vendor However, the 'email' message type is not getting set when I create a PO? anything more I needed to check? Regards

  • Business logic in PL/SQL?

    Hello, I am designing a 3-tier, web-based intranet application for my client. It's going to be a WebSphere portal app with Struts, running on Oracle 8.1.7. One of the requirements is to implement the business logic in the back-end (PL/SQL), not in Ja

  • Map Representation help, resurrecting Molez

    I have searched the web and the forum for this, I even searched under scorched earth as that is a similar problem, but I haven't found anything. I am resurrecting an old DOS game called molez for a class project. The problem I am having is an efficie

  • What is a bilevel image ?

    Hello, I'm trying to create a tiff image using the CCITT T.6 bilevel compression, but the codec needs a bilevel image and I don't know what it is and how to create one. Can somebody help me ? Thanks in advance, Olivier