Rotation lag/frame drop in built-in apps

rotation in the default apps is HORRIBLE. Laggy and frame drops were the norm. Especially the App Store, where the animation took over half a sec to start and very jittery during the animation. third party apps seems fine for some reason. Anyone else experiencing the same problem?

Hi DX
My modem is not rebooting by itself. Are you downloading a lot putting the modem in heavy use? If so that might be the reason why it is rebooting as the cable modem telstra provides have a small NAT table, which causes the modem to reboot when the table is filled up in heavy use. 
I think my problem lies either on the copper wire itself or the modem. It has been raining in Melbourne these few days so I  have a strong feeling the rain damamged the copper wire  

Similar Messages

  • All included(exept frame drops)

    Hi all,
    since i ve been told i was in the wrong forum by some ubber poster, here i go again.
    I did my 1st ever music video only using my mc book pro. (i actually forgot my external hard drive to do my normal job as a musician).
    it was actually pretty fun to do both video and music only with the webcam and the built in mike of the laptop.
    I only used what was in the machine, no outboard gears, goin' back and forth between I Movie and logic pro, after recording thru photo booth.
    there:
    http://www.youtube.com/user/TheDigitalwarz?feature=mhum
    i still had a problem though: frame drop between i movie and logic.
    (meaning i was not on the same clock lock everytime)
    it costed me lots of time relocking the 'beat'.
    Any Ideas?
    Cheers

    FWIW, posting in the right forum will mean that more people that are familiar with your software applications will see your post, thereby increasing your chances of getting proper advice in a timely manner.
    And since you're using iMovie, you should probably post this question in the appropriate iMovie forum - they are located here: http://discussions.apple.com/category.jspa?categoryID=141
    That said, if you had been using one of the Pro video apps (FCE or FCP) the answer would probably be to make sure the format, audio sampling rate and bit depth of the audio matches that of the Sequence settings. In most cases it would be AIFF, 48khz, 16 bit. However, iMovie works completely different from the Pro apps so that may not make a difference.
    -DH

  • Frame dropping when Chinese Pinyin-10 key Keyboard pops up

    Almost all the Apps are effected by this issue in iOS 8.1, even you creating a new message can cause this noticable frame drop when Chinese Pinyin-10 key keyboard pops up.
    Note that:
    (1) This issue never occurs in iOS 7.1.X, 8.0 and 8.02, and full QWERTY keyboard is fine.
    (2) If turn on Settings->Accessibility->Increase Contrast->Reduce Transparency,  Chinese Pinyin-10 key Keyboard also works fine.
    I have to use full keyboard instead now. Please fix this.

    Kurtis614 wrote:
    I bought my device from China-Unicom.
    Thanks, I was curious because I think only devices bought in china have the Chinese Pinyin 10 keyboard, it is missing for everyone else.

  • Help!  Frames Dropped During Live Capture

    I am trying to switch over to Adobe Premiere from Final Cut Pro, but am having a serious problem with frames being dropped during capture.  When I do have frames dropped, it doesn't even save the video that it was capturing.  All that I get is a corrupt file that won't open.
    I'm using a Mac Pro with 3.0Ghz Dual Core Xeon Processor, 9GB 667MHz RAM, and a BlackMagic Decklink SDI card, and am trying to capture 720p 59.94fps video over SDI.  I am capturing to an interal 1TB 7200RPM dedicated scratch disk that is not used for ANTYHING but live capture.  The OS is 10.6.8.
    I only have 3 capture options in Premiere using the Blackmagic card: 8-bit, 10-bit or DVCHDPRO.  I want to use 8-bit, because DVCHDPRO is 960x720 instead of 1280x720.  But, I have tried DVCHDPRO and it did not work either.  I can successfully capture video for 5-10 minutes, but then I always get the Warning that frames were dropped and Premiere fails to save the video properly so that it can be opened.
    I have used BlackMagic's speed test app and determined that my internal hard drive's data rate is plenty sufficient for both 8-bit and DVCHDPRO.
    Final Cut Pro 6 has always captured perfectly fine using this exact setup.  It even gives me a lot more capture options for the BlackMagic card - I'm not sure why I'm limited to only those 3 capture settings in Premiere.
    I would really appreciate some help to point me in the right direction to get this resolve.  Thanks!

    Randal,
    It might be a bit tough on a fast computer, especially if the BIOS are not set to show POST at boot-up, a common setting nowadays. As Steve says, the exact key will differ by your BIOS brand.
    You may not actually see the particular logo screen, that Steve is talking about. I'd do a cold-boot and immediately tap the ESC key. If this does not get you into your BIOS Setup, then repeat, but tap the F1 key. When I say "immediately," I mean immediately upon hitting the Power On button.
    With older computers, you had about 5 sec. to get into Setup, but not anymore. On my laptop, I still have trouble hitting the F8 key fast enough to boot Windows into Safe Mode. I miss it, more than I get it. Could also be that I've been away from gaming for too many decades, and my gunfighter reflexes ain't what they used to be, but I'll just blame it on faster computers. I have the same problem with trying to flush my Preferences in Adobe programs, gotta' hit the Shift-Ctrl-Alt key at precisely the right time. [Exact key combo does differ with some Adobe programs]
    Also, if you can give us the name of your BIOS, say "Award," we might be able to give the exact key to hit for Setup. If you have the MoBo manual, it will be in there, plus the correct key. You still have to be quick, however.
    Good luck,
    Hunt

  • Save frame to photos in photos.app

    When you view a video in the new photos.app, on the drop down menu from the little cog there is an option that says "export frame to photos"
    Does this work for anyone? Where does the frame go?

    The Photos.app stores the preference settings in a file in your hidden User Library.  If this file has become corrupted, you can see all kinds of problems with the graphical user interface - missing menu items, etc.
    To remove this file, do the following.
    Quit Photos, if it is running.
    Reveal your user library and delete this folder:  ~/Library/Containers/com.apple.Photos/
    To reveal the hidden User Library:
    Bring the Finder forward by clicking on the Desktop or the Finder icon in the Dock.
    Select your user/home folder (with the house icon in the Finder sidebar)
    With that Finder window as the front window, press the key combination ⌘J to bring up the View options.
    In the View options panel enable ’Show Library Folder’. That will make your user library folder visible in your Home folder.
    Open your Home folder, then the Library folder, then Containers.
    Move the complete folder com.apple.Photos to your desktop. Move the entire folder, not just the contents.
    Now restart the Mac and try again.  If all is well, delete the folder from the Desktop.
    Be aware, that removing the Preferences will reset all preferences you set using the Preferences panel in Photos. You will have to set them again.  Also, Photos will not remember the location of your Photos library. If the library is not in the default location in your Pictures folder, you have to open it directly by double clicking it.

  • GE70-Apache Pro w7 extrem frame drops

    Hi There ,
    Ive just got a MSI GE70 -Apache Pro w7 but if i cant play battlefield 4 multiplayer without frame drops if i set the settings on medium and  it drops down to 29 fps with micro lags  i think it uses the Intel graphics instead oft the GTX 860 but how can i change that ive Seen people playing on ultra with this GPU.
    Specs:
    I7 4710hq
    8gb RAM
    Gtx860
    Windows 7
    Plesse help.
    BTW: sorry for my english i'm From Germany.

    Quote from: jannes.oppermann on 11-January-15, 17:06:52
    Hi There ,
    Ive just got a MSI GE70 -Apache Pro w7 but if i cant play battlefield 4 multiplayer without frame drops if i set the settings on medium and  it drops down to 29 fps with micro lags  i think it uses the Intel graphics instead oft the GTX 860 but how can i change that ive Seen people playing on ultra with this GPU.
    Specs:
    I7 4710hq
    8gb RAM
    Gtx860
    Windows 7
    Plesse help.
    BTW: sorry for my english i'm From Germany.
    start up your game bf4 tell me if your power button is orange when game is runing if so then nvidia is active if not it will be blue which means intel
    Intel = Blue
    Nvidia = Orange

  • Skydrive built in app wont let me update it and it doesn't work

    A day after the name change became official my built in skydrive app stopped working. Every time I click on the app it loads the clouds then goes to a message "This location can't be found, please try again later", then it flat crashes and I
    am back at the start screen. What the hell people, why? Also, why the hell can't I uninstall it then just re-install it? What on earth possessed you into believing that this app HAS TO BE BUILT IN, for god's sake Microsoft the damn thing is broken now and
    the only possible way I can think of to fix it would be to refresh the OS which I don't want to do because then I have to sit around and let it update all over again plus I would have to re-install my programs as well. I hope you not only fire the engineer
    who thought this was a good idea but I also hope you castrate him. This was truly a sad, unnecessary, stupid act to do. All you idiots had to do was make this no different from office 365 and I would have uninstalled it, re-installed it and probably saved
    us all the trouble. Also, it hasn't stopped me from using onedrive but the entire point of your built in app has become pointless, it doesn't work because of your name change for some reason and now I can't fix it without sacrificing a whole damn day to get
    back to where I am at. Would it be too much for you to make this onedrive app removable in your next firmware update? As of now, I have removed your office 365 because that was a pointless thing to have when I already have office 2007 but now I am stuck with
    this broken skydrive app that I can't fix, update, or remove without sacrificing my time. It is not easy re-installing a program like bluebeam revu you know and as of yesterday my photos app has now become just like the skydrive app, it doesn't work, my pictures
    are all there but the app itself keeps crashing. Seriously man, let us remove your trashy apps and let me re-install it already

    Hi,
    "A day after the name change became official my built in skydrive app stopped working"
    Did you point that SkyDrive changed to OneDrive?
    Did you move your OneDrive to another location or change its name?
    Please login OneDrive with web-based to check if you could access it successfully.
    Please refer to the following article to try the troubleshooter and check the service status:
    SkyDrive: FAQ
    http://windows.microsoft.com/en-in/windows-8/skydrive-app-faq
    Karen Hu
    TechNet Community Support

  • Macbook to TV - Frame dropping

    I have recently purchased a new Sony 32" LCD TV that only has supports a frame rate of 50Hz. However, this means that when I attach my macbook via a VGA cable to the TV to playback things on my Mac every few minutes the frame drops off for a few seconds and the screen goes blank saying there is no signal and then the picture reappears (the sound is not effected).
    However when I then try set up the display size etc you are not give the option of a 50Hz frame rate with any screen size, the smallest it goes to is 60Hz. Is there anyway to get around this problem to stop the frame dropping off every few minutes?

    rlps20, what you describe is not frame dropping. Frame dropping would not cause the screen to go blank. At worst frame dropping would look like a discontinuity in action. What you are dealing with is something else.
    Do you have the newer MB with DisplayPort on it? If so, check and make sure your Apple Mini DisplayPort to VGA Adapter has the latest firmware. Yes, the adapter has firmware in it. Strange but true.

  • Help please with FaceTime. The built in app seems to have disappeared from my iPad2. Bought it in Australia

    Help please with FaceTime. My built in app seems to have disappeared.

    If K Penguin's suggestion doesnt work, you will have to go to you iTunes and do a reset, that is if you do not have it in your back up library.

  • How to remove built in apps

    as mentioned above: How to remove built in apps on iPhone4 / IOS5

    Hmmm, strange....
    The Game Center is annoying for me, I don't understand why Apple insists that I should have it on MY phone

  • Can not buy a built-in app

    Hi all. Can you help buying built-in app, for example can not buy gems in Clash of Clans.
    It comes to "Please contact iTunes Store Support" to let you make this purchase.

    Certainly you can click the most appropriate options.
    Get started
    Itunes
    itunes store
    Account management
    Apple id disabled, or Topic is not listed, or any other appropriate response

  • Transitions double 1st frame/drop last frame: a solution

    I have found that Transitions in iMovie 5 are problematic. The first frame in a Transition doubles and the last frame drops out. This is not noticeable in a slideshow but can be very noticeable in an exported video.
    Transitions cannot be edited frame by frame unless one exports video out to a camera and then imports it back into iMovie. The original clips and transitions are now seamless clips. One can delete extra frames and then find and import the missing frames from original sources. HOWEVER, this process is incredibly frustrating and time consuming.
    THIS IS WHERE THINGS GET INTERESTING.
    To avoid the above, I thought I would add textless Titles over a few key clips and transitions where the glitching is most obvious. I had noticed that Titles longer than the clip they were inserted into, merge together the clip with its transition and following clip.
    i.e.,
    1. DEselect 'Over black' in the titles window.
    2. Select a title format and then a length longer than the 'glitched' transition.
    3. Split the clip so that the Title can be inserted.
    4. Insert a TEXTLESS Title that spands the clip, transition and into the next clip.
    5. Then edit out duplicate frames and insert missing frames from the the now 'single' clip.
    STILL just a piecemeal. STILL labour intensive.
    THIS IS WHERE IT GETS MORE INTERESTING.
    I tested this on a couple of clips and, LO AND BEHOLD, 'Title-merging' a clip with its transition and following clip results in the duplicated first frame of the transition DISAPPEARING and the previously dropped frame of the transition, REAPPEARING. A fix.
    One could blanket a video with long textless Titles (i.e., 45 seconds at a time with Rolling Credits) to fix the transition glitches.
    I know that this is not a great solution, but it does allow me to export video with the quality I need.
    Is there a better solution? (I find it ironic that years later, iMovie 2.1.2 is still, for me, the most successful of all the iMovie applications.)

    the duplicated and dropped frames move to the beginning and end of the added short (4 seconds, for example) texless title. Using a longer title (10 seconds, for example) fixed also this.
    if I understand your original reply correctly, it is important that the blanket transition ends in the middle of a clip and not a transition.
    In my tests I used a blanket title (did you invent this descriptive word?!) that spans some of the previous clip (I split it 1-2 seconds before the transition so I could add the blanket title), the transition and some (1-2 seconds) of the next clip.
    If it ends in a transition, the transition plays and then the ORIGINAL clip plays, duplicating the first part of the clip.
    I didn't quite follow. I just tried this with a 30 frame transition. Then I added a 1:15 blanket title 1:00 before the transition (so the blanket title ended in the middle of the transition). Result: The first frame of the blanket titles was duplicated and the last frame of the blanket title was dropped. Otherwise it played as expected.
    shift select the clips to establish a total length of the video clips and them add a title that ends just inside the last clip.
    Yes, I did just that to measure how long a title was needed. In my tests it seemed that it was important that the blanket title wasn't very short (<4 seconds) because then the problem frames were just moved to affect the title. Using a longer blanket title (10 seconds) seemed to fix the problem for both the transition AND the blanket title.
    <div class="jive-quote">With a textless title blanketing an entire video, my COMPRESSION TIME to Quicktime is incredibly shortened (1/3 to 1/2 the time).
    That's interesting. I've noticed that simple projects (i.e. not much cuts) export faster than real time to Full Quality .dv. But complex projects take MUCH longer to export as .dv. AFAIR this didn't matter in iMovie 1-4. Maybe the blanket title simplifies the relevant parts of the project?
    [sigh] I wish we didn't need to be aware of the plethora of obscure gotchas and workarounds like this. I don't expect there to be an iMovie HD 5 update anymore. I guess some bugs will be fixed and some brand new bugs will be introduced in v6.
    The same thing happened with iMovie 4 bugs. ...So this time I thought to quickly gather AND report all iMovie 5 bugs to Apple so they could quickly fix them during the first months. ...but it seems that the iLife team just isn't granted enough resources to fix them. Many known old bugs are again just described in the knowledgebase articles.

  • How can I see the whole week with calendar built-in app ?

    How can I see the whole week with calendar built-in app ? My husband has an ipad and he can see the whole week and the whole year... is it possible with iphone 4 ?

    What you see is what is available.
    Turning the iPhone into landscape mode with Month, Day, or List view selected provides the closest thing to seeing an entire week.

  • HT201272 How can I see the whole week with calendar built-in app ?

    How can I see the whole week with calendar built-in app ?  My husband has an ipad and he can see the whole week and the whole year... is it possible with iphone 4 ?

    You have posted in the itunes store forum.  This has nothing to do with the itunes store.

  • Most of my built in apps are erased on my brand new ipod touch 4g, like face time and apps store . How do i get them back, like face

    i need my built in apps back . Does any one know about this ?

    The built in Apps can not be deleted. Check other screens. Check existing folders. Check Settings - General - Restrictions.
    Stedman

Maybe you are looking for