Rotation of label using smartforms by 90 deg using zebra printer

Hi,
I am facing one problem using smartforms for label printing. Since the zebra printer which is being used requires 90 deg rotation of form for the normal smartform design. I have even tried using ZPL commands by using ^FWR  command in the window attributes but the text within that window only gets rotated and each line gets overwritten on one another. Please let me know if it s possible to rotate the complete form in smartform for label printing using zebra printer.
Thanks and Regards
Anand

Hi Anand,
Check my previous thread below about this:
Re: print label landscape to zebra printer - text position wrong & overlapping
regards,
Aidan

Similar Messages

  • Problem with printing barcodes to a Zebra printer via Smartform

    Hi
    I am trying to create a printed label from smartforms, being directed to a zebra printer.  The label must include a barcode.
    Via oss notes 750002 and 750772 I have imported the LZEB2 device type.
    In SE73 I have created a system bar code on the new technology.
    In the smart form style, I create a character type with this barcode font.
    The barcode prints okay and can be read when it has up to 10 characters.
    However we need a long bar code of appoximately 22 characters.
    I can find no supported barcode type which will let me write a barcode of this length
    The max length in the smartform style for the barcode format is always coming up as 50mm which is too short.
    I have tried with using a printer bar code prefix and suffix with the native zebra ZPI-II commands, attaching to command nodes on either side of the text node in the smart form,  But this does not seem to work.
    Any advice ?
    Thanks

    sounds like the variable containing the barcode data is too short...is it at least 22 characters long?

  • PO Fonts in Bold using smartforms

    We are using smartforms.
    We are using the SO10 Text for the Labels.
    we are storing the Chinese, Japanese, Korean and other labels in SO10 like Sales Contact, Payments Terms in the above languages.
    But when we click on the PO output form we are not able to get any of the labels in Bold.
    We have tried doing bold in so10 but it does not work. It does not show up in bold in the PO output form.
    Is there a way to accomplish this in smartforms
    Thanks
    Srini

    Hi Chaithanya,
    For declaring Internal table in Form Interface you need to do like this:
    IT_KOMV      LIKE  KOMV
    The structure you are giving in Associated Type should exist in DATA Dictionary(TCode -SE11). If the structure you are passing ITAB_HOLD does not exist in DATA Dictionay then you need to create it Otherwise you can not pass the data to smartform.
    ALTERNATIVE SOLUTION:
    And you can also declare internal table in TYPES Tab of "Global Definations" in smartform.
    If you have declared ITAB_HOLD by your own the you might be filling it with different structures. Then insted of passing ITAB_HOLD in smartform pass different tables to smartform.
    Declare Internal Table in TYPES Tab of "Global Defination". And fill it with the different tables you are getting from Form interface. To fill this internal table create PROGRAM LINES & concatenate the data of different tables into Internal table. & use it.
    You can Pass N numbers of tables & structures in smartfroms Form interface.
    Reward points if helpful answer.
    Ashvender

  • 90u00B0 grad rotation of label (Smartform)

    Hallo Friends,
    Problem:
    In the smartform that I am working has Portrait format. But I want to print out using a Zebra printer in Landscape format (W=16cm; L=20cm) I mean just turn the print out 90 degree.
    What I did:
    So, I choose the checkbox LANDSCAPE format (DINA4) in the smartform. The printer still prints in Portrait
    I then created a new Paper Format (W=16cm; L=20cm). On printing I get the error message: Zebra does not suppot paper format.
    OSS tip:
    After searching in OSS I got the hinweis 750772 which I implemented.
    Problem:
    After impletation of the OSS:- 750772 the labek printing was rotated 90° but output was totaly mogged up.
    can someone help please.

    Hello KPN,
    Yes, I know about the sap-notes and have tried the tips too. However, the printout is all mugged up on the same line. This my problem. I will try with new-line command and see if the lines print would be seperated line for line.
    Do you have an example for me, with screen shots etc?
    However, thanks. I have given points
    Blacky.
    Edited by: BlackMoses on Mar 10, 2008 8:09 AM

  • Label printing at Goods Receipt using SMARTFORMS and Zebra software

    Hi Experts,
    Upon designing a functional design for the printing of labels upon goods receipt and a re-print through MB90 I would like to understand the procedure on how the label gets printed. From what I understand the following steps are done:
    A label is designed in the Zebra application tool.
    The file is downloaded from the application and uploaded into SAP
    A SMARTFORM is created in SAP and assifned to a new output type.
    The new output type is assigned to the Zebra Printer.
    Is there any need for an abap program to be written, if so when and what is its purpose?

    Output Type WEE1 uses sap print program  SAPM07DR.
    Can the following data fields be retrieved from this program:
    Material Number (MSEG-MATNR)
    Bin Number (MSEG-LGPLA)
    Material Description (Feed (MAKT-MATNR) Get (MAKT-MAKTX))
    Supplier Name: Feed (MSEG-MBLNR) get (MSEG-EMLIF)
    MSEG-EMLIF=LFA1-LIFNR
    Feed (LFA1-LIFNR) get (LFA1-NAME1)
    Supplier Material Number: Feed (EKPO-EBELN) get (EKPO-IDNLF)
    PO number and Item: Feed (MSEG-MBLNR) get (MSEG-EBELN) and (MSEG-EBELP)
    GRN Date: Feed (MKPF-MBLNR) get (MKPF-BLDAT)

  • BarTender for Zebra Barcode Label printing using Smartform

    HI Experts,
    Does anyone know how to use BarTender 7.10 software to create barcode labels for Zebra printer?
    I have to include a jpg Logo into the Label using BarTender.
    But when I test using the Zebra printer - the logo/picture won't print out.
    Any idea?
    Thank You.
    Best Regards,
    CW

    Hi There,
    I had problems with using Bartender when I tried to print a logo onto my labels, but I contacted a [labelling company |www.iidsolutions.net] who specialise in barcode label printing and the bartender software,  they sorted out my problem but then after a chat with them I decided it would be easier to get them to print the labels for me as I had loads of changes and they were quite cheap.  See if they can help you. :~)
    Good luck.
    Dave.

  • Label printing on ZEBRA printer TLP2844 with smartform

    Hi Gurus,
    Requirement:
    Print label on Zebra printer with smartform
    1. i have created a smartform with desired layout
    2. and trying to print on Zebra printer
    Questions:
    1. smartform is not printing on zebra printer
    2. suggest me if there are any ways to print smartform on zebra printer
    3. does it requires any native programming language for printing labels on zebra printer
    Best Regards,
    Krishna

    hi Krishna,
    This printer does not support ZPL2 so I thnk you cnnot use the device types like LZEB2. It should work to print via windows and a device type like SAPWIN or SWINCF.
    Regards,
    Aidan

  • How can you rotate the labels on the category axis of a graph in Illustrator and have it stay the same when updating the graph data?

    I am needing to create a line graph with dates consisting of MM/DD/YY along the category axis. I would like to rotate the labels 45 degrees and have them stay when I update the graph. I have read about manually doing it, I even made an action to make it faster, but it still seems inefficient. Is there a setting that I could use to automatically create my labels as rotated? Thanks.

    Hi Gravy Train,
    I'm curious about why you are using 2 loops.   You mentioned one is for monitoring and one is for DAQ....what do you mean by that?   What is the overall goal of this piece of code.   Also, I noticed that you are not closing the task.   Since this is just a subset, I realize you could be closing it in your actual code, but just in case you're not.....it is very important that you close all tasks when you are down acquiring data.
    Best Regards,
    Starla T  

  • Unable to print chinese characters in Smartforms use Zebra printer

    Hi,all.
    My printer is Zebra ZM400 300dpi,I created a new output device 'TestDevice' and use the Lzeb3 Device type.
    In my smartofrms i used the Zebra command to rotated text.Now the smartforms counld not print chinese characters but '#' instead.(style font 'ANDALE_S')
    Anyone could help me....
    Thanks Advance.
    Andy Lee.

    Hello Andy,
    If you use the device type LZEBU3 with font ANDALE_S, then when you print then the SAP system
    send a print control for activating the ANDALE font installed on the printer, and the text should
    be outputed over this font.
    When you get # during print then this means that the device type or the SAP font don't support
    this character(this was the original problem), when you get a "space" then this means that the
    font which is used by the printer don't support this character.
    I think this can have 2 causes in your case:
    1. The SAP system use the print control SF000 when you use ANDALE_S, which contains
    the print control ^CI17^F8 in HEX form. This should activate the ANDALE font on your printer.
    (You can find this under tr. SE73 -> Printer Fonts -> LZEBU3 -> ANDALE_S)
    You should check wheter this is the correct print control. You should find on the printer an option
    which list you all installed fonts, and also the print control which can be used for activating it.
    Compare this print control from the printer with the above print control from the SAP system.
    If you see a differnce then change the print control in the SAP system.(Before you do that please
    copy the device type LZEBU3 into customer namespace, don't change the original SAP device type)
    2. The font installed on the printer don't support the character which you use. Contact Zebra to confirm this, and ask for a ANDALE font which supports the character.
    Best regards,
    Norbert

  • How to have rotated axis labels in charts without embedding fonts?

    Hi all,
         I am trying to have slant/rotated axis labels in flex charts to avoid clutter in cases of large number of sample points. It was fairly easy to do this using 'labelRotation' method in AxisRenderer but this involved embedding fonts [ causes my swf to increase in size by atleast a 100KB which in my case is very high ]. My question is.. Can this be done without embedding the fonts? Maybe with the use of labelRenderer? Any alternatives that would solve the purpose without increase in swf size are also most appreciated as I ve been struggling with this for quiet a while.
    Thanks a ton,
    Siva

    Please check LabVIEW\Examples\picture\demos.llb\polar plot demo.vi
    But it has no zooming and cursors.
    Maybe you can modify that example and use XY plot instead of picture control. I mean for each function plot on the picture, you generate another function to replace it and generate XY data pairs.

  • Urgent!! Printing Barcode using smartforms

    req: need to print barcode using smartforms.
    【Settings】
    The following settings are made already
    1.  Style ( paragraph, character type(Syatem Barcode ) )is created and activated (T-code:Smartforms)
    2.  In the smartform I used the above style to print barcode  .
    ※TEXTTYPE = TEXT ELEMENT.
    【Execution】
    1.  I run the smartform in test mode with setting any print parameters
    2.  Trigger print preview
    【Problem】
    1. I am getting only BAR's no barcodes.
    The bracodes are not displayed properly.
    If I test the same system barcode in SE73 it displayed properly.
    Is there anyother settings are necessory?
    Plz help me in solving the peoblem

    Hi
    To Create a Bar code prefix:
    1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
    2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
    Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
    The place where you are using the field value use like this
    <C1> &itab-field& </C1>.
    You will get the field value in the form of barcode.
    Which barcode printer are you using ? Can you download this file and see.
    http://www.servopack.de/Files/HB/ZPLcommands.pdf.
    It will give an idea about barcode commands.
    Check this link:
    http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
    Check this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
    Hope this link ll be useful..
    http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
    Detailed information about SAP Barcodes
    A barcode solution consists of the following:
    - a barcode printer
    - a barcode reader
    - a mobile data collection application/program
    A barcode label is a special symbology to represent human readable information such as a material number or batch number
    in machine readable format.
    There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
    You can print barcodes from SAP by modifying an existing output form.
    Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
    Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
    Reward points for useful Answers
    Regards
    Anji

  • Command to move content left/right in Smartform label for zebra printer

    Issue : Command to move print content left/right in Smartform label for zebra printer.
    Requirement : If you changed the printer setting top position and left position, Print should start from a specific (X,Y) position.
    I am facing an issue while printing a smartfroms in different zebra printer.  We had tried all
    S_LZPL_SETUP_X  (Where X is LH/SPD/MD/PM/FT )
    But these command are not working in smartforms.
    We had used ZPL II printer command like u2018LH X,Yu2019  and u2018FT,X,Yu2019  in main window as well as in subsequent windows. But that also not working.
    Please advice.
    dinesh.

    Hi,
    If you follow notes #750002 and #750772 and use a smartforms and device type LZEB2, then the you cn just adjust the position of the text in the smartform. e.g. Use tab-stops, spaces or adjust the position of the window. There is no need to use ZPL2 commands directly.
    Regards,
    Aidan

  • Rotation of labels, points

    What's the best way to store the rotation of labels in spatial ?
    How can GIS like Geomedia or ArcView use this rotation ?
    Thank you for answer
    Toni

    Hi
    Geomedia uses a concept called an "oriented point". Geomedia uses the Spatial linestring code (d001) but defines the first point as user defined (6000) so Oracle ignores this point. The set of ellements for this user defined point then contain the diagonal of the rotation matrix for that point (ie: its orientation). The second point of the linestring has the actual point values. Therefore all apps that use native oracle spatial reads should still be able to access this data as the first point/orientation is ignored.
    Hope that helps
    Patrick

  • Printing dunning notices using SMARTFORMS,error during parameter transfer

    Hi Friends,
                    I face a error message "Include text ZGA_DUN_HDR does not exist (object TEXT, ID ST)" when i run the dunning run.
                    I had searched every node for text ZGA_DUN_HDR in the smartform,I didnt find the text in it.
    However when I execute the smart form for print preview an error message "Printing dunning notices using SMARTFORMS,error during parameter transfer".This error i believe is due to wrong parameter passing in the fm 'GET_SF_DUNN_DATA'.It raises an error no_parameters_found.All parameters are passed correctly.
                    Can you guys help me out.
    Edited by: RAJIV KAUSHAL on Nov 14, 2008 6:03 PM

    you can create this text ZGA_DUN_HDR  in SO10 tcode and try ...

  • Printing Dunning Letters using Smartforms

    Hi all,
    I have a requirement wherein I need to print dunning letters using smartforms; the dunning data are extracted in program SAPF150D2;I modified the subroutine OFI_DUN_ACT to call function module FI_PRINT_DUNNING_NOTICE_SMARTF.
    Now I need to extract the dunning data in program SAPF150D2 to be imported to my new form using GET_SF_DUNN_DATA, my question is where do I code the calling of FM GET_SFG_DUNN_DATA? I'm a little bit confused on the step by step process of the dunning data extraction to printing of the form... Thanks...

    In the INITIALIZATION of the Smartforms, after the call to  GET_SF_DUNN_DATA, you have a many informations back, of which the record of MHNK and an internal table of MHND, which you can use to select other informations from database.
    So fill or enrich your own internal table in the initialization.
    I enclose thereafter a sample to help you
    * Load data
      CALL FUNCTION 'GET_SF_DUNN_DATA'
           EXPORTING
                is_sfparam          = is_sfparam
           IMPORTING
                es_mhnk             = mhnk
                es_t001             = t001
                es_knb5             = knb5
                es_lfb5             = lfb5
                es_t047             = t047
                es_t047c            = t047c
                es_t047i            = t047i
                es_t056z            = t056z
                es_f150d            = f150d
                es_fsabe            = fsabe
                es_adrnr            = adrnr
                es_uadrnr           = uadrnr
                es_adrs             = adrs
                es_uadrs            = uadrs
                es_t047b            = t047b
                eb_testprint        = testprint
                e_langu             = langu
                e_lang2             = lang2
                es_f150d_esr        = f150d_esr
                es_paymi            = paymi
                es_paymo            = paymo
           TABLES
                t_mhnd              = th_mhnd
           EXCEPTIONS
                no_parameters_found = 1
                OTHERS              = 2.
    IF sy-subrc <> 0.
      sy-msgid = 'FM'.
      sy-msgty = 'E'.
      sy-msgno = 461.
      RAISE others.
    ENDIF.
    h_t040a-text1 = space.
    show_interest = space.
    LOOP AT th_mhnd INTO mhnd WHERE xzins = ' '.
      show_interest = 'X'.
      EXIT.
    ENDLOOP.
    * Load user information
    DATA: usr21 LIKE usr21, addr3_sel LIKE addr3_sel.
    CLEAR: usr21, addr3_sel, addr3_val, adr6.
    * Charger fiche profil
    SELECT SINGLE * FROM usr21 WHERE bname = sy-uname.
    * Récupérer l'adresse
    MOVE-CORRESPONDING usr21 TO addr3_sel.
    CALL FUNCTION 'ADDR_PERS_COMP_GET'
         EXPORTING
              address_pers_in_comp_selection = addr3_sel
         IMPORTING
              address_pers_in_comp_value     = addr3_val
         EXCEPTIONS
              OTHERS                         = 1.
    * load SMTP address
    CLEAR adr6.
    SELECT SINGLE * FROM adr6
      WHERE addrnumber = usr21-addrnumber
        AND persnumber = usr21-persnumber.
    * date format
    SET COUNTRY adrs-land1.
    * Group similar posts
    DATA: xbseg TYPE bseg,
          xbkpf TYPE bkpf,
          xpost TYPE th_outtab.
    REFRESH: t_post, t_cumul_waers.
    LOOP AT th_mhnd INTO mhnd.
    * Select lines to use
      IF mhnk-gmvdt IS INITIAL.
        IF mhnd-xzalb <> space OR mhnd-mansp <> space.
          CONTINUE.
        ELSEIF t047b-xpost NE 'X' AND mhnd-xfael <> 'X'.
          CONTINUE.
        ENDIF.
      ENDIF.
    * Map data
      CLEAR xpost.
      MOVE-CORRESPONDING mhnd TO xpost.
    * Load text from bseg
      SELECT SINGLE sgtxt INTO xpost-sgtxt FROM bseg
        WHERE bukrs EQ mhnd-bbukrs AND belnr EQ mhnd-belnr
          AND gjahr EQ mhnd-gjahr  AND buzei EQ mhnd-buzei.
      PERFORM edit_text CHANGING xpost-zuonr mhnd-xblnr xpost-sgtxt.
    * if "Payment difference" get the date of original document
      IF mhnd-bschl = '06'.
        SELECT SINGLE bldat INTO xpost-bldat
          FROM bkpf
          WHERE bukrs = mhnd-bukrs
            AND belnr = mhnd-rebzg
            AND gjahr = mhnd-rebzj.
      ENDIF.
    * Collect posts to print
      COLLECT xpost INTO t_post.
    * Collect amount per currency
      MOVE-CORRESPONDING xpost TO cumul.
      COLLECT cumul INTO t_cumul_waers.
    ENDLOOP.
    * Load customer information
    SELECT SINGLE * FROM kna1 INTO kna1
      WHERE kunnr = mhnk-kunnr.
    SELECT SINGLE * FROM knb1 INTO knb1
      WHERE bukrs = mhnk-bukrs
        AND kunnr = mhnk-kunnr.
    * Convert date to text
    PERFORM convert_date USING control_parameters-langu mhnk-laufd
      CHANGING text_date.
    PERFORM convert_date USING control_parameters-langu mhnk-prndt_before
      CHANGING text_prev.
    PERFORM convert_date USING control_parameters-langu mhnk-grdat
      CHANGING text_extr.
    Regards

Maybe you are looking for

  • My Weather Mobile

    For you weather junkies like me, this is the greatest weather app yet for the iPhone. Be forewarned however: I downloaded and installed this app last night and immediately was unable to connect (spinning wheel) to any of my mail accounts. Pandora wou

  • Looking for app that works like a guitar trainer

    Anyone know if there's an app that lets you play back iTunes music but slowed down without changing the key? So I can learn guitar pieces... Thanks

  • ITunes wont uninstall or Install.

    When i go to uninstall itunes it isnt in the list of programs that can be uninstalled. And when i downlaod iTunes it runs the installer but when it get to the end of the installation process, i get a message that says that the current version of iTun

  • SD Card in CD Port

    I have put an SD card into my CD Port.  Is there any remedy short of sending the iMac into Apple?  I can't reach it with a small probe.

  • How can I join 24bit tracks without ripping from CD?

    I've begun to upgrade my library to 24 bit audio, and many of the albums I want to upgrade have tracks which should be "joined." But if I buy, say, Pink Floyd's  Dark Side Of The Moon from HDTracks, and want to have each side play as one continuous t