Rotation-problem. Any got the solution?
"I've noticed that launching a video full-screen to begin with allows you to rotate, while launching a video that plays inline to begin with and then subsequently blowing it up full-screen will not allow you to rotate."
What is the solution to this problem?
The solution is to wait for Adobe to correct the bug. It has been reported.
Ali
Similar Messages
-
Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above "
iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
"....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows 4 sameArchived - iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
Products Affected
iTunes 7 for Mac, iTunes 8 for Mac, iTunes 9 for Mac
This article has been archived and is no longer updated by Apple.
Symptoms
After installing the Mac OS X 10.4.9 Update, iTunes may be unable to properly authorize your computer to play your iTunes Store purchases.
Resolution
The following steps will delete your network preferences. Most broadband connections do not require any special settings to connect, but if your connection does or if you are not sure, please contact your ISP or network administrator for further assistance.
Important: You must be logged in as an Administrator.
Click the Finder icon in the Dock.
Choose Go to Folder from the Go menu.
Type /Library/Preferences/SystemConfiguration
Click Go.
In the Finder window, locate the file named NetworkInterfaces.plist.
Drag this file to the Trash.
Restart the computer.
Once your computer has restarted. You will not be able to connect to the Internet. Now you will need to refresh your network settings to be able to connect again.
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
To refresh your network settings, from the Location pop-up menu, choose New Location.
Type a name for your location and click OK.
Click the Apply Now at the bottom right to accept the changes.
If your network connection requires any special settings, you will need to put them back in at this point. Once you have made these changes you should be able to connect to the Internet again and authorize your computer to play your iTunes Store purchases. -
My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off 2. Switch off the phone for several times. 3.press the home button n power button until the apple logo appears. 4.reset my all settings.
My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off 2. Switch off the phone for several times. 3.press the home button n power button until the apple logo appears. 4.reset my all settings.
-
I have reached out to this community as my Iphone display gone black and got the solution to keep home and power button pressed. It worked but I would like to know
1. Why it went black and is there a permanent fix for this
2.Will the IOS gets automatically updated as I feel the IOS was 5 when I got the phone in 2012 december
3.Do you suggest 7.1 for Iphone 41. There is no way of knowing. These things happen.
2. The iOS only gets updated when you want it to be.
3. You should always update to the latest iOS your phone will support. Apple do not write the updates to make your experience worse. -
My apps will not download to iPad 2 This is something that has just recently happened. Have tried re-booting but that makes no difference .
Has anyone got the answer to this problem please or do I need to take it into an Apple store Thanking you.If all of that stuff checks out - and iTunes is telling you that the apps have been downloaded to the iPad - try this.
Connect your iPad to your computer and launch iTunes. Right click on your iPad name on the left side of iTunes under devices and select Transfer Purchases from the pop up menu. Then sync with iTunes again. Don't eject the iPad yet. If you still don't see the apps on the iPad - click on the Apps Tab in the iTunes window on the right and see if they show up on any of the iPad screens. If they do - make sure that all of the apps are selected (checked) to sync - (checkmarks in the boxes next to the app names) - check to make sure that the Sync Apps heading is checked and as well and then sync again. You may have to click on Apply in the lower right corner of iTunes if the apps were not selected to sync. -
I have searched for a possible reason to why my iPad will not rotate. I found this forum and tried the solutions posted but they did not work. This is not my first apple product, so I am not completely ignorant to this. I searched in the ad it self to see why but apparently no settings were changed. It worked fine, i pluged it in so I can take care of the baby and when I went to pull it off and use it, it would not rotate any more.
Mchelbel wrote:
i pluged it in so I can take care of the baby and when I went to pull it off and use it, it would not rotate any more.
That's your problem. You gave priority to the baby! What's wrong with you?
Seriously, despite your comments, I strongly suspect that the issue is an incorrect setting. It's easy to accidentally mess it up if you're new to the iPad.
The side switch is the key. Depending on your settings, it may affect the mute or it may affect the rotation lock. This support article from Apple provides detail.
http://support.apple.com/kb/HT4085
In case you're wondering, here is the history. Originally, the mechanical switch affected only the rotation lock and the mute was a software switch elsewhere. In IOS-3, it was changed to be the mute switch and the rotation lock became a software switch. This was done to ensure consistency among IOS devices. Unfortunately, a large quantity of users complained loudly, alleging that they turned the rotation lock on and off several times every hour and the convenience of the mechanical switch is essential. In IOS-4, Apple bowed to the whiners and made the switch function selectable and now we're stuck with a mess. -
I've got the solution for hiding the "Unread BBM Messages icon" on top of your Homescreen
I previously posted a Question about how to delete the icon that shows that i have unread BBM message when I dont really have any unread message. Unfortunetaly no one was able to help me but anyway here is the solution:
1- Press Alt + LGLG and then Press the Menu button --> Clear log --> Delete.
2-Go to yuor Menu --> Options --> Secuirity Options --> Advanced Secuirity Options --> Memory Cleaning --> click Menu button on your phone and choose Clean now and then wait till all the categories are checked
3- Optional** But it sometimes help your phone work faster. Go to your Blackberry Messenger and then go to your blocked list and mark them all and delete them from your list.
Now finally restart your mobile by either taking the battery off or Alt + aA + Del.
If this have solved your problem please click on the Kudo Star
Happy Blackberrying ;P
May B.
2204DB3E#1 and 2 have nothing to do with clearing unread BlackBerry Messenger notifications.
#3 certainly can can clear unread BBM notifications.
#2 Memory Cleaning does nothing but wipe your already-deleted memory space to a higher security allowance or government specification (and quite frankly is worthless to the average user unless they want to hide something like p0rn or messages/information related to illegal activity they don't wish a law enforcement agency to have access to.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Imp-00010 problem , WHAT IS THE SOLUTION?
hi ...
I TOOK THE OCP COURSE IN ORACLE 10G , I HAVE THE OCPSQL.DMP FILE WHICH MAKE THE SAME TABLES IN THE MATERIAL SO THAT ONE CAN EXCUTE THE CODES IN THE BOOK AND MAKE SURE OF HIS ANSWERS BECAUSE THIS FILE CREATE THE SAME TABLES AND SO ON ... BUT WHEN I IMPORT THE FILE IT MAKE THE ABOVE ERROR AND THE INFORMATION WON'T BE THERE ... PLZ IF ANY ONE CAN FIX THE DAMAGE OR GIVE ME THE SAME FILE I NEED IT ERGENTLYfirst of all thankx for replying , hoek , I will write the code that I paste in sql * , It excuted perfectly but the problem is in the dmp file , the text is
drop user ocpsql cascade;
drop role sqlrole;
create role sqlrole;
grant alter session to sqlrole;
grant create session to sqlrole;
grant create table to sqlrole;
grant create view to sqlrole;
grant create sequence to sqlrole;
grant create synonym to sqlrole;
grant create procedure to sqlrole;
grant create trigger to sqlrole;
grant create type to sqlrole;
grant query rewrite to sqlrole;
grant create any index to sqlrole;
grant create public synonym to sqlrole;
grant execute on sys.dbms_stats to sqlrole;
create user ocpsql identified by oracle;
grant unlimited tablespace to ocpsql;
grant sqlrole to ocpsql;
host imp ocpsql/oracle file=c:\ocpsql.dmp log=c:\ocpsql.log -
Dear gentlemen:
i know how can update ios update but when i make update my iphone shut down and it can't start.
it always Show the apple mark and then disappear i can't make any thing i need know what can i do ?
thank youContact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
IPhone 6 Plus camera rotation problem - any way to fix it?
I took 7 photos this evening with my new iPhone 6 plus. All were taken in landscape mode. All were taken standing, holding the camera in landscape position pointed straight ahead or at a slight tilted down angle to shoot something relatively low in height.
3 of the photos came out oriented correctly. But 4 came out rotated incorrectly. And there doesn't seem to be a way to correct the rotation in the Photos app, is there?
Why don't the photos consistently turn out rotated correctly in the Photos app?
In the Camera app itself, I looked at each one after shooting via the little window that appears after taking each photo. In all those views the photos were oriented correctly.
A bug? Anything I can do to fix it?
Thanks,
dougThanks for the hint about the rotate. AppleCare didn't know about that when I did a support chat with them on this issue.
What they had be do was "reset all settings."
Side-note: They said doing that would not delete any data, but it took like an hour to get things back where they were because all sorts of things were lost: wallpaper, my touch id fingerprint, wi-fi password, Messages addresses, the name of my iPhone - and at least a dozen other settings. They could have warned me.
Anyway, I only did one test of 7 landscape photos after that, taken at various tilts, and they all came out correctly rotated. So maybe that fixed it. Or maybe it just didn't show up in the 7 photos I took. Time will tell. Worth a try? But just know you have to redo all your settings.
doug -
Lisa Loeb "Best of" CD Problems - Anyone Got a Solution?
I purchased the "Best Of" CD by Lisa Loeb Tuesday. I get a couple of tracks into the CD, and then iTunes tells me that my request cannot be processed because of some kind of unknown error and to try again later.
Well, I've been trying for 4 days now. I've been in contact with the support people, who have told me twice to make sure I have the latest version, which I do (6.0.2.23 or something akin to that). Then, they say the "unknown problem" is fixed when it hasn't.
I guess my question is - has anyone been able to download the album successfully? I've downloaded albums from them before, but I'm hesitant until this issue is resolved, since I have what they call a purchase queue.
Any tips would be greatly appreciated.I purchased the "Best Of" CD by Lisa Loeb Tuesday. I get a couple of tracks into the CD, and then iTunes tells me that my request cannot be processed because of some kind of unknown error and to try again later.
Well, I've been trying for 4 days now. I've been in contact with the support people, who have told me twice to make sure I have the latest version, which I do (6.0.2.23 or something akin to that). Then, they say the "unknown problem" is fixed when it hasn't.
I guess my question is - has anyone been able to download the album successfully? I've downloaded albums from them before, but I'm hesitant until this issue is resolved, since I have what they call a purchase queue.
Any tips would be greatly appreciated. -
[Exception... "Component returned failure code: 0x80520012 (NS_ERROR_FILE_NOT_FOUND) [nsIFileInputStream.init]" nsresult: "0x80520012 (NS_ERROR_FILE_NOT_FOUND)" location: "JS frame :: chrome://1clickweather/content/js/utils/filemanager.js :: <TOP_LEVEL> :: line 233" data: no]
This is the error message I get when I log onto my Earthlink email program and onto any website. I don't see any solution to error messages of this kind on the troubleshooting page.That is a fault with the 1Click Weather extension. Disable it or un-install it.
-
GMT problem any one give solution
i am developing blog project using struts and hibernate. project is working fine in local server.
my remote server located in West Virginia.
the problem is when i post message to remote server. message post date display one day back (10:30 hours late)
i post msg from india time. GMT + 5.30 hours
West Virginia GMT -5.00 hours
total 5.30 + 5.00 = 10.30 hours back
how to solve this problem.Use a SQL timestamp for all your dates; it does not include any timezone info. Normalize all dates to UTC/GMT in your database.
Then if you want you can display the dates in the user's local timezone by using a Calendar objects instead of a Date. For instance, in a web app where request is an HttpRequest object...
String tzName = TimeZone.getDisplayName(request.getLocale());
TimeZone tz = TimeZone.getTimezone(tzName);
Calendar cal = Calendar.getInstance(tz);
Date date = ...a normalized UTC date you retrieve from your database
cal.setTime(myDate);Then your dates should display correctly no matter where your users are accessing them. -
Account Name = "Other..." ??? I've got the Solution
There are two ways you can go about resolving this issue.
1. Follow the steps here:
http://docs.info.apple.com/article.html?artnum=306840
or (as was the case with me and the above didn't work, Apple Support was very helpful - so here I am returning the love!)
- Similar to the above -
NOTE: type all spaces and Capital letters as you see them below
1. make sure your computer is off
2. restart your computer holding down "command + s" to start up your computer in Single User Mode
3. At the prompt, type this followed by Return: *mount -uw /*
4. Next, type this followed by return: *ls /Users*
MAKE A VERY CLOSE, EXACT NOTE OF THE ACCOUNT NAME THAT YOU WANT TO LOG IN WITH. You will need it later.
5. Type this followed by Return: *rm /var/db/.AppleSetupDone*
6. at the next prompt, type: exit
This command will start up your computer as if you and newly installed Leopard (but will keep all of your files etc. intact just as you left them on your computer)
IMPORTANT: when you reach the Account Setup screen, type your previously noted "Short Name" into the field for Short Name. Select a Password and continue with the registration.
when you have finished the registration etc. and you are back at your desktop, launch the Terminal application (which is located in the Applications/Utilities folder).
After launching Terminal type: *sudo chown -R USERNAME:staff /Users/USERNAME*
note: USERNAME = your short name
the next prompt will ask you for your password. Input your password (you will see that you are not typing anything) and hit enter.
Everything has been done correctly if the cursor makes a hard return.
AND THEN YOU'RE DONE!! Enjoy your computer.
Cheers,
RaphaelSounds like my old post as well
Non Admin Accounts:
-Boot to single user Mode: Hold the apple key and the letter S, Hit the power button and keep holding the apple key and the letter S down, (When you see a few S’s being typed in Darwin, Delete the S’s).
-(Type) mount –uw / (then Enter key)
-(Then type) rm /var/db/.AppleSetupDone (Enter)
-(Then type) exit
The computer will then restart and come to a screen as if you just bought the computer allowing you to create a new Admin account. Follow the steps and at the Wireless part hit…Different network setup then My computer does not connect to the Internet, since we will be deleting this account when done. This will be a Temp user.
-When done with the registering part and selecting a picture you are in as an Admin Account
-Go to the Apple on the top left, click system preference, and then Accounts, You will see your old account as standard and the new one as an Admin.
-Click the lock on the bottom left and use the new Password to unlock
-Then click the old account and on then bottom right click MAKE THIS USER ADMIN
-Close the lock and Log out from the apple menu
-Log into the Old Account, same old password and in same case’s the new password
-Once in old account go to the Apple and select system preference and then accounts again. Open the lock and select the new account made, after that is selected hit the – above the lock and Delete account.
And then there ya go, You are now an admin again from upgrading - 10.4.11 to 10.5
I hope this works and if you have any questions post here please and ill try to reply ASAP. -
HI Guys I have recently asked to transfer my Windows creative suite to a Mac computer. I received the serial number but unlike my lightroom install disc, which is win and mac, my Creative Suite disc is windows only, how do I go about installing a Mac version of my creative suite onto the Mac computer?
I am talking about the Ver 3 download link that came with the purchase email.
That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
/Applications/Aperture.app
/Library/Application Support/Aperture/
~/Library/Application Support/Aperture/
Leonie
Maybe you are looking for
-
Deleted line item not display in Print preview
Dear All , Pl guide that when i delete the line item from a P.O then this deleted item is not visible in Print Preview .pl help what are the exact setting due to which i can know why this del item is not coming in Prin
-
What will happen when I plug in my new classic iPod?
Hi, I am getting a new iPod classic 80gb tomorrow, hooray! I already own a 30gb iPod video which I have just sold. When I plug my new iPod in tomorrow will everything be ok? Will it automatically sync the existing music library or wipe the lot?! Coul
-
Black ops 3 will not download need help
I preordered black ops 3 and I got the theme but not my advanced warfare or my beta does anyone know what happen
-
hey, does anyone know any mpeg or avi converters to convert to the ipod compatible(mpeg-4), thanks a lot, and please reply i'm really having trouble with my ipod.
-
Hi SDN Community, I kow that you can use these IT for the "old" Compensation Managment for Job Pricing. We now want to use the new Job Pricing in ECM using the BSP Application. I see that there is also a customizing step for the IT 1050. - but I did