Rotation problem when talking to friend on FaceTime.

Recently when talking to my friend on FaceTime she kept saying that the rotation was off when we talked and that the little box with her face in it was no longer on the screen.  I kept locking and unlocking mine with the side button, and even going to settings, then general, and adjusting the rotation on hers and mine with no luck.

What does "the rotation was off" mean? If you can describe more clearly what the problem is, the more likely we can help you. How were you trying to adjust the rotation on your friend's iPad?

Similar Messages

  • Auto Rotate problems when shooting tethered overhead

    I am shooting with a Canon 5d mark 2.  When I shoot product into the auto rotate works properly and the image appears rotated properly. Although when I shoot overhead or down on product it seems to get confused. If I rotate the camera twords the horizon and fire it figures out which way it should be the I can reframe my overhead shot.  But if the camera is moved at all it will show up rotated the wrong way and I have to slightly move the camera away from its directly overhead framing again so it can figure out wich way it should be rotating. I have tried all three rotate modes with the camera with similar inconsitant results. What is the best setting on the camera to get consistant results. Or ii I turn auto rotate off is there a way to tell lightrroom to rotate it properly on import like it does for all other settings like white balance.

    This isn't a function of tethering, I wouldn't think. Many cameras have a sensor that determines the orientation of images so auto-rotate works. The problem is that these sensors generally only work along one axis, using the force of gravity to tell them where down is. When you orient the camera such that the lens is pointing down most sensors no longer are able to determine whether you are in portrait or landscape, because there is no down -- it ends up being somewhat random.
    I've seen this on many different cameras, and all without tethering. It has to do when the sensor is read when composing the short.
    Your best bet is to set the camera to ignore the sensor when taking pics like this, and rotate the image by hand that are need to be in portrait. If there is no rotation in the image metadata, Lr will not rotate it. It will have to be done by hand. It won't be that hard to select a number of images and bulk rotate them.

  • Camera rotation problem when exporting a camera from After Effects CC to Cinema 4D 15

    Looking around, this problem is happening to a few people, with no satisfactory solution.
    Basically, when I export an AE camera / project into C4D, everything looks great... till I notice that the camera's horizon will jump a few times.... so that if it were tilted 20 degrees to the left, it will pop to be tilted 20 degrees to the right.
    It's definitely not in the footage- it's a simple walk down a hallway. The AE track is fine- it's only in the C4D track that the problem arises.
    I've tried creating new AE projects, re-exporting, etc. I'm running AE CC and C4D 15.
    Anyone ever figure out how to fix / get around this?
    Thanks!

    It's 13.2.0.49... I just installed it yesterday.
    C4D is R15.008
    I'm wondering if I would have the same issue with C4D Lite, but I can't figure out how to open it (I assume it downloaded with AE). Rather than launch Lite, AE seems to automatically find C4D 15 and open that.
    I've been using AE and C4D for over 15 years, so I'm quite familiar with both. The bug is odd and quite disappointing, as I bought this version of AE specifically so that I could track footage and export the camera info into C4D.
    Any help on this would be greatly appreciated!

  • Rotation Problem on FCP

    Friends,
    When I rotate a video on FCP (does not matter the degrees, 20, 45, 90...), using the motion tab, my rendered images gets sort kind of distortion... When I preview it on FCP, it rotates ok, but when I export using the Compressor, when the video rotates, it squeezes, it does not look right...
    Please, could someone help me?
    Thanks

    Yes - the button is in rotation lock mode (not mute).
    Neither switch setting (up or down) work. The state of the button is accurately reflected on the screen when changed, but the problem of not rotating problem when unlocked persists.
    Given that this started just after updating to iOS 7.0.6 I'm inclined to think there is a software issue.

  • My FaceTime won't connect. Every time I try to call my friend it says connecting. Then unable to connect. Or lost connection. And when I go to our FaceTime history it said "FaceTime answered on another device." What can I do to fix this problem?

    My FaceTime won't connect. Every time I try to call my friend it says connecting. Then unable to connect. Or lost connection. And when I go to our FaceTime history it said "FaceTime answered on another device." What can I do to fix this problem? We always used to FaceTime. And now all of the suddenly we can't.

    Apple has released a document which is reported to address the recent FaceTime issue.
    http://support.apple.com/kb/TS5419

  • HT1444 FaceTime calling FaceTime can't hear me when talking but can hear them on macbook pro  but using FaceTime iPhone works good family has mac pro same but it works fine

    face time on mac book pro 15.5 cant hear me talking but can hear them family has same computer but it works fine facetime on Iphone works good to    

    Does your mic work in System Preferences?
    System Preferences > Sound > Input
    There is an Input Level meter that should light up when you talk. Just to make sure your mic and Mac are working.
    Which mic are you using? Are  you using the built in mic on an Apple Display? I have Apple's LED display and every time I use Facetime, as in place or take a call, the mic input volume gets reset to a level so low, people can't hear me. I have to manually raise the mic volume back to where I had set it. When I end the call, Facetime resets the volume back to where I set it. If I don't reset the mic volume level on each and every call, people can't hear me.
    I called Apple on this. They downloaded a log file tool to my Mac and took some logs. Then they called me back and said this works as designed. Incredible.
    So, if you are using Apple's LED display, this may be your problem. Note that the mic volume level gets set low and reset back only during a call. If you check it before a call and then after a call, it looks fine as if nothing changed. Open up the Sound prefernces and watch it get reset in real time.

  • When I Talk To Someone On Facetime I Cant Hear Them But They Can Hear Me

    When I Talk To Someone On Facetime I Cant Hear Them But They Can Hear Me

    Look at the previous posts on your problem.  You can access some of them by looking at the posts on the right side of this page under the heading: More Like This.

  • Facetime keeps rotating screen when not moving, restart not helps

    I am using ipad2, OS 4.3.1. facetime keeps rotating screen when not moving, and I restart ipad2 but it does not help. Is this due to earlier version of OS or it's a bug of facetime?

    It is odd that your screen will only rotate without you touching your iPad, during a factime call.  In all the factime calls I've made, I've never had my screen rotate if I wasn't touching my unit.  I will say that the gyro on both my iPads is pretty sensitive and I've found it quite easy to get the screen to rotate with a simple movement of my iPad. 
    The only other suggestion I have is one that will take more effort and work and still, it may not solve your problem.  It is one Apple will request you do, before making an appointment with the Genius bar, so you might as well do this.
    You should back up your iPad, then restore your iPad from the backup.  If that does not solve the problem, the last option is to do a full restore of your iPad as a new unit.  Then, you'll sync over the content you want from Apps, to music, to pictures, etc.  Again, before you do either a restore from backup, do back it up. 
    If all that doesn't solve your problem, make an appointment with the Genius Bar at your Apple store.  If they find you have a deffective unit, they will replace it.
    I hope you get this resolved. 

  • I got problem when trying to contact my iphone 4 using facetime,it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.

    i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

    i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

  • Iphone 4: while talking, phone automatically switches onto facetime and at other times when talking the sound "beep beep" is heard and disconnects from call?

    Iphone 4: while talking, phone automatically switches onto facetime and at other times when talking the sound "beep beep" is heard and disconnects from call? Anyone know what is happening??

    Basic troubleshooting from the User's Guide is reset, restart, restore.  Has any of this been tried?

  • Problem when activating FaceTime on IPhone 5

    There is a problem when trying to activate FaceTime on IPhone 5 with IOS 6.0.2.
    When I try to add my icloud email address in Settings > FaceTime > Use your Apple ID for FaceTime and enter my email, a get a message that the username or the password is incorrect and to try again.
    Any help please?

    Make sure in "general - accessability - reduce motion" is set to OFF

  • When using Skype my IPad sounds like ocean. This is not a problem when I am on FaceTime or using other apps with sound.  Recently updated to newest IOS 7. First there was no sound for Kype and found that had to turn microphone sound on.

    When using Skype my IPad 2 now sounds like the ocean and I can barely here my contact.  This happened recently after IOS7 update. I did turn the microphone on for Skype as it was required after update.  Now my sound is terrible but only a problem when using Skype video call.  It is okay for FaceTime.

    Thank you!  Resetting resolved the issue with terrible sound when trying to use skype.  Sounds much better! 
    I am not sure what all changed when reset was applied to settings --- assume it defaults back to basic settings.  I have no idea what I had customized, so will slowly figure out.  I have noticed several things.  So far I had to add back my wallpaper and reenter password to get back on my wi-fi. 
    At least SKYPE is now audible.

  • When will portrait format rotate problem get fixed?

    A Slide Show generated in Organizer and output to Premiere Elements for video editing can still have problems with Protrait Format photos.
    These photos have proper orrientation in both Organizer and the Slide Show when viewed in Orgaizer.  However, when the Slide Show is transfered to Premiere Elements for video editing and production, some Portrait Orrientation photos lose their proper orrientation and end up laying on their sides.
    This problem appears to be camera specific.  My Canon SX230HS is an offender.  This problem can be avoided by using an edited version of the photo.  However, that is a pain if the photo does not otherwise require an edit.  I believe that in PSE/PrE Version 8, the problem could be corrected by a simple rotate left and rotate right sequence in Orgainzer.  However, that "work around" appears to have gone away with the PSE/PrE Version 9.
    This problem is a real pain when producing a slide show containing photos from multiple cameras.  I would think that if PhotoShop Elements, Editor and Orgainzer are aware of Photo orrientation, then Premiere Elements could also have the same intelligence.

    To permanently alter the Rotation of portrait Images, yes, that would be a good workflow.
    I normally shoot in RAW (Nikon or Canon), and then process the Images in ACR (Adobe Camera Raw) through Photoshop. There, I will do the Rotation, and when I Save_As PSD, the Rotation is permanent. For users of Adobe Lightroom, the operation is the same. I assume that it will be the same with PSE, but have to admit that I have never used that program. Still, in most respects, it works just like its "big-brother," Photoshop. Now, I also use Adobe Bridge (big-brother to Organizer), and with that Save_As, it will handle the task of Rotation too.
    One thing that I have never experimented with is the differences between doing the Rotation in an Image editing software, like PS, vs doing it with the Fixed Effect>Rotation in PrE, or PrPro. Based on the Scaling algorithms in PS vs PrE, or PrPro (up to CS 5), I would think that the Image editing software would be a bit better, but that is ONLY a guess on my part, and especially as the Rotation algorithms will be different than the Scaling algorithms. Maybe I need to do some control testing, though my workflow is set up to do the Rotation in ACR.
    Good luck,
    Hunt

  • Why do I mute or dial when talking on the phone? I used to not have any problems.

    Why do I mute or dial when talking on the phone? Previously I did not have an issue. The phone seems very sensitive

    The proximity sensor might have failed on your phone.   That's what forces the phone to dim the screen when you bring it up to your face.

  • After 4.2.1 Dropped/Choppy calls and poor signal / Gets hot / Battery Life is bad when talking

    What is this APPLE? I can see the Iphone 3G is old and no more support but atleast make a working OS and then go out on a high note. Instead of leaving us hanging with a broken phone. Not just me , scores of others have these very same symptoms. Also I wish there was a way to go back to an older OS , one  that worked %100 for my phone.
    Dropped/Choppy calls
    Get REAL warm
    Batterylife is crap only when talking
    Never had these problems before 4.2.1 , it's like night and day. I was hooked on the Iphone since I bought this 3G brand new and its ease of use but Ill tell you one thing....
    Im not under contract right now with anyone
    I WILL NOT be buying a phone/contract with APPLE as long as 4.2.1 is left in our "lap".
    I WILL be buying another smartphone if this is what we are left with. I was going to treat myself and buy the 5G with a contract to make it cheaper but as of now
    Im feeling "used" by APPLE and not going to take it.
    I know some might come here and post ..
    "Me and others aren't effected by 4.2.1 , must be your phone"
    BS! It was night and day when I downloaded/installed 4.2.1. This is NOT my Phone and IS the firmware. And my friend that is a phone nut said he didn't download 4.2.1 because of all the problems he was hearing about it, I should have done research. He said the biggest hit was the 3G and he can't belive I installed it.
    APPLE DO YOUR JOB AND FIX THIS. MAKE 4.2.2 ATLEAST AND FIX THESE PROBLEMS!! IF NOT THEN WE MUST PART WAYS.
                                                                DamianJP

    Cool
    Did the new device and didn't do a restore from backup. Grabbed all my contacts from windows contacts saved list. So only thing the same on the phone was the same 4.2.1 that stays in there. Still bad signal and battery life, although the battery problem might be the age of the battery since its the same battery that came with the 3G.
    I did the Field Test mode program
    http://socialtimes.com/find-your-iphones-signal-strength-using-the-hidden-field- test-mode_b4690
    - Open the iPhone’s dialer keypad
    - Enter *3001#12345#*
    - Press the Call button
    -80 to -70 dBm: Reasonably strong signal
    -107 to -90 dBm: Weak signal
    -113 dBM: No serviceable signal
    In my house im getting any were from -100dBm to -117dBm ( 1 to 2 bars with 3G)
    Outside Im getting -85dBm and up. (2 to 4 bars with 3G)
    I have to do more testing to get solid numbers though. I got almost full bars all the time if I switched to EDGE.
    (4 to 5 all the time with EDGE). That makes me think that with the problem in 3G , it's the OS. Since ALOT of people saying  that there 3G drops or is bad since 4.2.1.
    Now I looked around and I playied with all my settings to insure that my battery should not drain thru improper settings. So I think given this is the original battery , it might be a good time to try and install a new one from here for $17.
    http://www.iphonebatteryrepair.com/iPhone-3G-Battery-p/bat-1001.htm
    Iv'e opened Iphones before (fixed my friends 3G) after he dropped his and the vibrate/silent button's screw came loose and he could not change it off silent mode and replaced a battery in my other friends 3Gs. SO i feel comfortable in there.
    I dont know if the bad battery could be reducing my signal.Ill try the battery cause it's only $17 (Cheap investment) and because my battery life under a load drains it fast. Again I don't know if it's the OS or the age of it.
    I was thinking maybe a poor contact/condition of my SIM card could be another possibility. I wonder if and how much a new SIM card from a AT&T provider is. I heard people saying you can get a new one but Ill have to ask my local AT&T dealer.
    Although this seemed so odd how it all happened the same night till now RIGHT after the 4.2.1 OS install and all the others people saying the same symptoms.
    Ill keep working with it and give you (and others users here) updates in my progress  for the people who are in the same "boat" as me.
    By the way I haven't tried to make Itunes re download the OS by deleting the file in the directory you gave me above. Ill try that as soon as I post this message.
    Also Iv'e noticed that theres a way to download a older version of Firmware OS and put it in a certain directory and use the DFU mode (Deep Firmware Upgrade) on the Iphone to force the Iphone to re install the current version or an older version ( whatever version you download) of firmware. Now Im very worried that this might mess my Iphone up to were it wont even work so I really dont want to try this right now or until I exhaust all my other options. I have to do more research of this method.
    Sorry for the long post but I think I kept it faily organized for a easy read, I hope.
                                Thank You Ingo !!
                                            DamianJP

Maybe you are looking for