Rotobrush CS6 Display Shift

I'll try to keep this simple. I have a guy center frame he's on a green plate that was keyed with keylight. I duplicated the layer and on the first layer I am rotobrushing the tie only so it's in B&W on the 2nd layer and the colored tie stays in color.
Simple, done it a few times in CS5.5.
However when I first go to paint the stroke for the tie the IMAGE shifts WAY right and if I drag down a bit and release the image shifts back left and the roto has grabbed the tie.
CS6
Video Card: Nvidia Quadro 5000
Anyone experience something similar?

Turn off the fast preview at the bottom of the comp. Sure, some weird OpenGL, but other than the usual "update your graphics driver" I doubt you can do much about it and only revert to software rendering mode for the tiem being.
Mylenium

Similar Messages

Bridge CS6 Display Problem

When I set up Bridge, I used 3 columns. The left column contains the Files/Folders Panel with the Filters/Collections/Export Panels underneath. In the middle is the Content Panel which is set to display 1 thumbnail wide. To the right is the Preview Panel with the Metadata/Keywords underneath.
Everytime I close Bridge and reopen, the display shifts so that I get a larger Content Panel which now displays 2 or 3 rows of smaller thumbnails and correspondingly smaller Preview and Metadata/Keyword Panels. Is there a way to make the display settings remain as I want them whenever I open Bridge?
Thanks.

Sure, just make sure you SAVE the Workspace you create under a distinctive name. See the Help files to learn about saving a work space if you've never done it before.
You also need to make sure you quit (exit) Bridge in an orderly fashion after recreating and saving your workspace, because Preferences are saved whenever Bridge quits normally, not when it crashes or you force quit it.

Flex and HTML display shift in Safari in Mac OS

When a popup is displayed in Flex app, the Flex display gets shifted down in Safari in Mac OS alone. However, even if the display is shifted down, the controls seem to be in the correct position. For example, for clicking a button, the cursor has to be some pixels above the shown display. Not only the Flex display shifts down. HTML Links display also shifts down along with Flex and Links are clickable some pixels above the display.
The problem happens only while triggering the Flex popup display in long flex screen. On a Flex screen within the browser height, with the same actionscript and Javacsript code, there is no problem.
This works fine in all other browsers including Safari in windows.
Has anyone faced this scenario? Any help will be highly appreciated.
For the popup to be displayed in center of viewable area, the following code is used.
callLater(SMBObjectUtil.changePosition,args);
In SMBObjectUtil.as file,
public static function changePosition(x:int, y:int, obj:UIComponent):void {
     var yPos:int = ExternalInterface.call("findScrollTop");      var winHeight:int = ExternalInterface.call("getWindowHeight");
     var appHeight:int = Application.application.height;
     var objectWidth:int = obj.width;
     var objectHeight:int = obj.height;
     var calculatedX:int = 0;
     var calculatedY:int = 0;
     if(Application.application.width>obj.width) {
          try {               calculatedX = (Application.application.width - obj.width)/2;
               if(yPos <= 0){                    calculatedY = ((winHeight-objectHeight)/2-100)>0?(winHeight-objectHeight)/2-100:50;
else if(yPos<=(appHeight-winHeight)){                    calculatedY = (((winHeight-objectHeight)/2)+yPos-100)>0?((winHeight-objectHeight)/2)+yPos-100:50;
else if(yPos>(appHeight-winHeight)){                    calculatedY = appHeight - objectHeight - (winHeight-objectHeight)/2;
          catch(e:Error){          }
     }else {
obj.x = calculatedX;
obj.y = calculatedY;
Javascript functions used are:
function findScrollTop()
var ScrollTop = document.body.scrollTop;
if (ScrollTop == 0)
   if (window.pageYOffset)
    ScrollTop = window.pageYOffset;
   else
    ScrollTop = (document.body.parentElement) ? document.body.parentElement.scrollTop : 0;
return ScrollTop;
function getWindowHeight()
var y = 0;
if (self.innerHeight) {
   y = self.innerHeight;
} else if (document.documentElement && document.documentElement.clientHeight) {
   y = document.documentElement.clientHeight;
} else if (document.body) {
   y = document.body.clientHeight;
return y;

Found a fix for this. CallLater() was giving the problem in Safari. Once I removed CallLater and directly called my function, the problem was resolved.

Hp 2311x monitor hs horizontal display shift right about 2 inches

My HP 2311x monitor worked fine on my old XP system. When installed on my new Asus desktop computer with Windows 8.1, the display shifted right about 2 inches. I have a black area on the entire left side of the screen, and can't get to my charm bar or other items on the right 2 inches or so of the display. Nothing I do seems to affect this. Any ideas, anyone?

Jimmy, welcome to the forum.
Here is the Win 8 driver for the monitor. Install it to see if it solves your problem.
Also, here is the Solve a problem section for the monitor.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Cs6 display

Hi
opening cs6 displays all toolbar which work ok. But main screen is blank and displays. could not complete your request because it is not the right kind of document What do I do. Any help would be appreciated
thanks

Please read these (in particular the section titled "Supply pertinent information for quicker answers"):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

Premiere Pro CS6 and Media Encoder CS6 Color shift on export

Hello,
I am working on an early 2008 Mac Pro with 2 X 3.2 GHz Quad Core Intel Xeon Processors 32 GB of RAM a NVIDIA GeForce 8800 GT 512 MB Graphics Card and I am running OS X 10.8.2.
I have the updated Version of Adobe Premiere Pro CS6 and Media Encoder CS6 through the awesome Subscription program that Adobe has started.
My footage is shot with the Canon 1D Mark IV shot 1920X1080 at 24 FPS
I am importing the camera files and then exporting them after I cut them up in to Quicktime Pro Res 422 HQ files
With the technical explination out of the way here is my problem. I have color right from the camera files that I like. and with out doing any thing to change the color I export the footage and get a dramatic color shift. The exported file looks desaturated and slightly green.
I have tried using Media Encoder CS6 to export my footage and that has the same result.
I started my career as a photographic retoucher and use photoshop and light room constantly so I am pretty confident that i know color. I also calibrate my Lacie 526 and Lacie 324i montiors monthly as well as have a sensor that will slightly shift the profile depending on the time of day.
I have attached three screen shots that show the color shift exactly. Now what I need is a solution. What I am not seeing is color settings for Premiere. I am totally open to any suggestions on what I might be doing incorrectly.
Ben

Benjamin Peterson wrote:
I started my career as a photographic retoucher and use photoshop and light room constantly so I am pretty confident that i know color. I also calibrate my Lacie 526 and Lacie 324i montiors monthly as well as have a sensor that will slightly shift the profile depending on the time of day.
I've been doing this for a few years now, and have come to some conclusions. Basically, the difference between still photography and video is like the difference between playing the trumpet and the sax. What you bring to the sax from playing trumpet is your ability to read music, what you know about composition, blending while playint with others, ect. But playing trumpet tells you nothing about how to physically play a sax. So it is with still photography and video.
For starters, your carefully calibrated computer monitor is just that, a computer monitor. It doesn't display the correct working space for video. What you need for WYSIWYG in video is a monitor that can show you the Rec.709 working space. Rec.709 has a different gamut, a different gamma, probably a different white point (D65), different phosphor colors, etc., etc., etc. Enought differences that it's difficult to make a computer monitor that can successfully display Rec.709. Yet there are a couple of computer monitors that can do this (a few Eizos, one HP). The vast majority of people doing serious color correction work in video use a production monitor for just this reason.
But a production monitor isn't enough. You also have to make sure that the signals you're sending the production monitor are correct. There's a sub-industry making signal converters for signals from NLE video cards (usually RGB based) -> signals for production monitors (usually YUV based).
That said, it is certainly possible to get a very good match between your NLE suite and a DVD / BD as displayed on an HDTV. But it's not as simple or easy as a calibrtated computer monitor for still photography use.
This is probably part of your problem. But Quicktime is probably the root of it. Quicktime is, well, I guess the polite way of saying it is that Quicktime is problematic. It gives all kinds of problems. Most people have abandoned it. You should too.

Why is My MetaData Window of Bridge CS6 Displaying Incorrect File info?

The File Properties tab in the MetaData Window of Bridge CS6 is saying that my file is 72 ppi but when I open my file in PS it is actually 300 ppi 15x10 inches. See screen grab below. I understand that 72 ppi at 125" x 41.7" is the same as a 300 ppi file that is 30" x 10" or 9000 x 3000 pixels dimensions. But why is bridge making this conversion and displaying the file resolution as being 72 ppi when the file is 300 ppi? Is there a preference setting somewhere that I need to change?
When I look at these same files from another networked machine using Bridge CS6 the Metadata window is showing the files as being 300 ppi? Is there a setting inside Bridge somewhere that is making it show all files in the Metadata window as being based upon a 72 ppi resolution?

jonnymo,
I believe I should have said Yosemite/Column view.
Has the issue appeared after an upgrade to Yosemite?

Dock/Display shifts to the right?

My macbook 2.1 display goes whacko and the dock shifts to the right and sinks half way below the bottom of the screen. If I move the cursor to the right hand edge of the screen the screen begins rolling continuously to the left.
In frustration I walked away and come back to find everything centered. It is doing this repeatedly.

It sounds like the "Zoom" feature is being activated. Check in "System Preferences">"Universal Access" to make sure it's off. You can also turn it on or off with the key combination "Option, Command, Number 8"

External displays shifted

I am running multiple external displays at 1920x1080 and the image is shifted coming out of the thunderbolt ports on my imac. Using a 2 mini display to VGA have also tried a mini display to DVI and they all send a shifted image. Tv's that can shift the image make up for this, but I also have some tv's that run straight DVI inputs and the image coming into them is shifted so you can't adjust. Is there a way the the external screens can be shifted left from the MAC? There is a bar on the left of the screens...you see the other screen with image adjustment moving the image left becasue it is coming out of the imac thunderbolt ports that way. Tried mulitple fixes and called apple and they have said there is not a fix for this. Never had this issue until I upgraded to Maverics, now I can't seem to resolve and I am running images at 1400x1050 which isn't at all what I want to display, but for some odd reason it fills the screen for now. Anyone else figure out how to fix this without buying new tv's? If it was one it wouldn't be an issue but with 8 screens this is not an option.

You can find the resolution/scan frequency requirements in KB 88396, iBook video output cables/adapters and resolutions.

Can't Display Shift Note Attachment (SHN2)

Hi Gurus,
I can make shift note attachment via tx. shn1.
Before it was saved, I can still display the attachment (excel format, or plain image).
The attachment more or less looks like this: filename.xls
When I save, and check it in display mode via tcode SHN2, the attachment filename become like this:
<SID>000000384
Notice that the file name change, and the format extension disappear.
I can't open the attachment this way.
Can you help?
Thanks.
Regards,

Hi, I've had the same problem with 6i. Our Admin moved the toolbar icons to special folder dedicated for such images other than the one with .fmx files of the module. Try to ask your Admin where the icons should be placed.

Display shift with ATi X1900XT

OK… it's my turn to ask a question and have a problem. In actual fact is less a problem than a big annoyance.
What is happening is that when I either boot, reboot or come out of sleep, the entire displayed image/desktop is shifted 1 pixel both up and to the left. The simplest way to tell is that the top left corner isn't rounded like the top right corner because it's chopped off by 1 pixel each way.
I can however rectify it by turning my display off then back on again else resetting the display to default via the OSD. This can get hugely annoying as one could imagine.
Anyone else get this problem with or without an ATi X1900XT?
By the way, I'm using a Dell 2405FPW 24" display although I doubt it's the display as it's be working fine with both a Mac mini and a PowerBook.

Ned you have a tough one here
LOL!! Why is it always my problems that are the tough ones. I would have thought it would be fairer if we shared them.
As for your suggestions, I didn't think of trying a lower, yet "incorrect", resolution though I'll give it a shot after I finish installing Windows… for the 100th time . Hmmm… I'll see if it does it in Windows too.
Like you, I think the issue is either with the card or the driver although right now I'm leaning towards the driver. I've still got to install Mac OS X on another driver so I'll see if it happens there as well.
To anyone else, if you wouldn't mind taking 2 seconds to have a look at the top left of your display the next time you reboot to see if I'm the only one with this. Thank you!

CS6 display is too small

I just purchased a new windows PC with resolution 3200x1800 and the display of all my CS6 production software are really small and hardly viewable. There is no option on the PC to adjust programs size, only display text and icons on the desktop. Can anyone help?

There is no option. CS6 does not support High-DPI displays on Windows and even on Macs, Retina support was/ is limited to Photoshop and Illustrator. You can only forcibly reduce the overall screen resolution at the cost of things losing sharpness.
Mylenium

Indesign CS6 display issues on macbook retina

Hi
Can anybody help? I have recently got indesign cs6 for my macbook pro retina and to my horror discovered it is not capable of displaying properly on the reitna. I also understand there is no quick fix for this, in fact it wont be fixed. So the display is pixilated, does anybody know whether or not plugging the mac into a non retina display monitor will overcome this issue or is it the way the retina reads the software? Basically will it still look pixilated on a monitor? Please help me

that's why i am asking, i'm not tech savvy (cleary) but i wondered if it was the screen on the mac or the way the mac manages the software. It sounds like a silly question (to you) but i thought a seperate monitor that isnt HiRes may display it better or does a monitor just replicate the screen of the mac....see this is how little i know!

Photoshop CS6 Display is WAY to small.

I have a new laptop with windows 8 and it has a recommended screen resolution of 3200 x 1800 which I would like to keep. When I got into my Photoshop CS6 however everything is so small I can hardly see it. What setting do I need to change in Photoshop to adjust the display setting so it is the same size as the other elements on my computer? I do not want to change the display settings of my computer. I have tried that and it makes everything else on my computer too big. Thanks so much for your help.

Photoshop CC 2014 (version 15) introduced 200% UI scaling for Windows.
Photoshop CS6 is version 13.

Will Photoshop CS6 display 30-bit-color with two GPUs?

Hello there!
I think about purchasing a small Nvidia Quadro, which supports 30-bit-color, since its not available on my currrent GTX 780Ti running on Windows 7 Ulitimate x64.
It is not a big deal to set the quadro, once installed, as the responsible GPU for color and OpenCL-acceleration...
BUT:
as long as the 780Ti has around 999999x times more computing-power than the small quadro (around 250 €), it would be nice to profit
of this as well. at the same time.
So: is there a way to use the Quadro purely for "displaying and color" and the 780ti for accelerating tasks in Photoshop CS6?
I'm afraid not..
but cheer me up pls.
Thanks in advance!

Thank you for the quick response!
unfortunately that's what I expected to hear.
It's a shame that Nvidia wont enable the 30-bit-feature under windows or mac until you
spend a few thousand euros for a K5000 or K6000
I hope that there will be a workaround for that soon. (maybe some tweaked quadro-drivers as I read a few years ago)
Thanks so far!

Rotobrush CS6 Display Shift

Similar Messages

Maybe you are looking for