Rough Cut Capacity Profile
Hello All,
I want to ask about Rough Cut Capacity Profile and how to analyse it in MC82 t-code,
I have made RCCP using MC35 for a Product Group X, where i use 2000 ton for the base qty
After that, i use MC82 t-code and than I enter the production line for just 1 month, for example i enter production value for June 2010, but for April,May and June still blank
The Problem is when i choose View --> Capacity Situation --> Rough Cut Planning --> Show, to analyse the capacity requirement,
I get that the Capacity Rqmnt value is not only in June, but also in May, Why it has to divide the calculation for 2 month? , because i just entry the production line for June, so i expect that the capacity rqmnt value is just appear in June
and How to calculate the formula for capacity rqmnt in MC82 ?
Regards,
Marufat
Hello All,
Is there anyone who can help me?
Please, I really need to solve this problem
Regards,
Marufat
Similar Messages
-
Rough Cut Planning Profile in SOP
Hi,
Need an input on the Values keyed in to the Rough cut capacity profile? Is there any documentation on the same?
I have maintained the Time span as 1 work day and the basse quantity as 1. In the resource table, i have keyed in the work center and the unit as H. Now when i maintain a value of 1 under the first day the capacity req is 1 in SOP but when i maintain a value of 1 in day 1 and day 2- the capacity requirement doubles
Edited by: Karthikeyan Balasubramaniam on May 9, 2008 4:28 AM
Edited by: Karthikeyan Balasubramaniam on May 9, 2008 4:29 AMHi Karthikeyan,
The follwoing information given by sap will be useful.
help.sap.com/printdocu/core/Print46c/en/data/pdf/PPCRPSOP/PPCRP_SOP.pdf
help.sap.com/saphelp_45b/helpdata/en/a5/63211443a211d189410000e829fbbd/frameset.htm
Reward if useful.
Thanks and Regards,
/N -
Rough Cut Planning Profile-by Capacity category
Hai,
I am creating Rough Cut Planning Profiles in ECC6.0 for use in Standad SOP (S076). In MC35, I don't see a place where I can enter by Work center category- like I want both Machine and Labour categories as I have different times for each category.
{ when I view the rough-cut capacity situation in MC82, system displays both categroies, but it is based on only the hours I maintained for one of the categories- how do I maintain for both categories?}
Thank you in advance:)
Sonali
Edited by: Sonali on Apr 28, 2009 3:05 PMHello Sonali,
Rough cut capacity planning is used only for bottle neck resources.Analyze your process and you will come to know for the product group or material which category or machine is bottleneck.
Create a rought cut planning profile for a production line or Workcenter or PRT or Cost(Relative cost not product cost).
PS:Roughtcut capcity planning should not be used for all the workcenters.
Thanks,
Raj -
Error while creating rough cut plannin profile using Info structure
Hi,
I got the following error while creating rough cut planning profile for Info structure,
Capacity planning is not possible for this info structure S504
Message no. MA489
Diagnosis
In the planning parameters for info structure S504, no key figure for capacity planning has been entered.
Procedure
If you want to capacity planning to be possible for this info structure, you need to enter a capacity key figure in the planning parameters for the info structure in the Implementation Guide.
The info structure which i used here is created by me. Can any one help me to overcome this error
Waiting for your replies
G.Muthamil Murugan.Hi addy,
Thanks for your reply. I have maintained the following Info structure which I created,
Under characteristic I have maintained the following,
1.Sales Organisation.
2.Sales group
3. Sales office
4. Distribution channel
5.Division
6.Material
Under Key figure I have maintain the following,
1. Order items
2. Production
3.Sales
4. Stock level
5. Target stock level
6. Day's Supply
7. available capacity
8.Target days supply
I don t know where i did mistake. can you correct me.
Regards,
Muthamil Murugan.G -
How can we define time stamp in rough cut planning profile
Hi all
There is no time stamp(From date to date) in Rough cut planning profile and it is just time span (0-5 ,5-10,... workdays) . If I have different capacity for my resource in different intervals how should I define it so that in planning table it can take it to account and show me requirement versus avalilable capacity acoordingly.Note that we are working with repetitive plannig and our resources are lines which have different production rate between each interval.
Regards
Babak BolourchiDear,
In REM you can use planning table through MF50 for your requirement.
For time stamp in rough cut planning profile please refer my reply from this link,
[Rough cut planning|Rough cut planning profile]
[Link 2|https://forums.sdn.sap.com/click.jspa?searchID=25236413&messageID=6404039]
Hope it will help you.
Regards,
R.Brahmankar -
Rough Cut Planning Profile MC35
Hi all,
I was trying to check capacity rough cut planning in product group level, so i have to make the RCPP (ROugh Cut Planning Profile) in that product group level using MC35,
i still confuse with the time span, base qty and the value in resource table at MC35, what is the connection between these 3 value??
regards,
MARUFATHi,
i still confuse with the time span and the resource table in RCCP MC35
i enter the time span with value 1, and the resource table column will give value 1,2,3,...
and when i enter the time span with 5, the resource table column will give value 0-5, 6-10, ...
if i enter the base qty is 5000 to, with time span value 1, and in resource table i enter for column 1 with value 40 and column 2 with value 50, what is the meaning of that? ( the Resource table use work center with UOM HR )
regards,
MARUFAT -
PP-PI: Rough-cut capacity
Hi Gurus,
We are in a process industry and using descrete production. We are not using production group but we use product hierarchy.
Now we want to run rough cut capacity to check resource capacity. Can anyone send me the complete scenario to check rough-cut capacity in my environment?
Thanks in advance.
Shiv1. Create a rough cut capacity planning profile in the Tcode mc35 using the infostructure.
2. Then create your planning data for the flexible planning mc93
3. then when you create the Planning data in the View Tab - y ou have the capacity situation .
4. when you select this it will branch to the Rough cut capacity planning - then select show in that
5. Now based onthe values that you avhe maintianed in the RCCP you can see the capacity requirement in an additional screen below your planing values.
Check the configuration for the
Configure scheduling parameters in the SOP menu of the SPRO
Let me know if you need more details -
Rough cut Capacity load in Standard SOP
Hi there,
I have created some sales & production plan syncronous to sales......but when I try to see the capacity load thru View- > Capacity Situation - > Rough Cut planning- > Show
It is showing me that No Resource load exists ...... please guide me how can I see the load for the same
Regards
KaushikHi,
Please maintain the settings as mentioned below.Then you can see the load.
Before you can carry out resource leveling in SOP, you must:
1.) Create a PP task list (a routing, a rate routing, or a rough-cut planning profile) for the material, product group, or characteristic values combination whose resources you want to plan.
2).Configure resources planning in Customizing for Sales & Operations Planning.
3).If you use routings or rate routings to do resource leveling, define the key figure to which the resources are tied. Do this in Customizing for Sales & Operations Planning under Set parameters for info structures and key figures.
4).Define the planning plant of any information structure whose plant is not uniquely identifiable (that is, either your information structure does not contain the characteristic "plant" or your rough-cut planning profile covers more than one plant). Do this in Customizing for Sales & Operations Planning under Set parameters for info structures and key figures.
5).Set the default SOP plant for Sales & Operations Planning. Do this in Customizing for Sales & Operations Planning under Set planning plant for SOP.
Thanks,
DV -
Rough-cut Capacity Check at any level on the Plng Hierarchy ??
Fellow Experts,
I have the following Planning hierarchy on my self-defined, consistent planning, Info structure:
MFG Plant >> Prod Family >> Materials.
Product Family is a grouping of materials by Machine Cells(Work centers). I've the data available @ the material level & the same is also auto-aggregated at the Prod Family levels. At this point I want to trigger Rough-cut capacity check at the Product Family level.
I've maintained the key-figure on the Info Structure, required data set-up on MC35, config for Scheduling parameters (to do rough-cut planning) & selection ID maintenance for Rough-cut Plng Profile to be picked up. Yet, the system keeps bumping me off with "No Resource Load exists" error.
Is there something wrong I'm doing or my expectations are incorrect?? Could someone help me out here??
Cheers
AnandHI,
Make sure the capacity planning relevant field is maintained for the Infostructure config setttings in MC7F.
Regards
Ratan -
Error while creating Rough cut planning profile
Facing the following error while creating rough cut planning profile (mc35) in SOP for product group. "Work center x plant y does not exist for task list type 3". pls advise- do i need to create tsk list for product group? pls advise with tcode to be used.
pls check the (task list ) usage you have maintained in the Work center.
In OP45 , pls ensure that for the usage ,
task list type 3 (Rough cut planning profile) is included.
If it is not included there , pls include the TL type 3 for your usage and now the prob will get solved.
Regards.,
Sheik -
Hi Gurus,
Our scenario is we have two plants.The sales orders and the PIRs will be created in the Plant 1 and these requirements will be transferred as Stock transport orders to plant 2(with special procurement key) .All the materials will be manufactured in plant2.BOMs and routings are maintained in Plant 2.
In this case if i want to maintain the rought cut planning profile , how can i map the scenario.
Please help me in this.
Thanks in advance,
RaviHi Krishna,
There are two plants.
Plant 1
Plant 2
We will be creating PIRs in Plant 1.There is a special procurement key maintained for material which will say stock transfer from plant 2.
The below are the steps:
1. Create PIRs in the plant1.
2. Run MRP
3. STO req. will be created in Plant 1 against the PIRs.
4. As the special procurement key is maintained in material master Planned orders will be generated in plant 2 against these STOs from plant1.And production will be done in plant 2.
So, now if i want to do rough cut plannig profile how can i proceed.
Thanks,
Ravi -
Mass processing for rough-cut capacity
Hello PP experts,
Help me with the options of checking rough cut capacity in flexible planning in Mass.
Are there any separate transactions availbable or can i create a macro?
Thanks,
G.Madhvaraj.Thanks Brahmankar, I understand that. Next doubt is,
This rough cut capacity situation is not been stored in my info structure.Where does it get stroed?
G.Madhvaraj. -
Problem in rough cut capacity planning
Hi,
I am facing following problem in rough cut capacity planning....
When the capacity is overloaded in a particular month then capacity requirement is getting passed on to previous month as shown below....int the month of MAY 2014 capacity is getting overloaded then capacity requirement is transferred to Previous month APR 2014... I don't want this...what can be done to avoid this....I want to see overload in month wise....Plz help
Thanks
KumarHi Rupesh,
Thanks for your help...finally issue is resolved...making the changes in OPU4 done the job...in OPU4 we need to remove the indicator of scheduling for rough cut capacity planning ........now getting the results as desired... -
Hey all,
i wanted to configure Rough Cut Capacity Planning in such a way that
1. i could view capacities of workcenters given that the demand (load) of planned orders could be executed in a particular period.
I accomplished this partially, meaning i could find out the bottlenecks on the workcenters but this was only on single material level, if i wanted to run this check on multiple the system, supposedly, offers me the option of using the product group, my question is, where do i view these bottlenecks on capacity IF i want to run RCCP on Multiple products.
2. i wanted to find out exactly how much i can produce in a period, given that the external and internal procurement lead times are incorporated this is usually reffered to as Master Production Scheduling, as far as i know atleast.
kindly shed some light on these matters.
Regards,
Danish
PS. i've seen similar posts to this but none directly addressing these issues hence i felt the need to ask these questions seprately.to further clarify my question i would like to see, as a result of stimulative planning (RCCP):
1. Impact of Planning (planned order quantities) from ALL materials that were being planned on work centers used in recipes.
2. Identification of bottlenecks, which is of course the subsequent function from point 1.
3. Capability to produce with reference to Materials availability (lead-times being incorporated of components). -
Rough -cut plan with capacity requirment calculation
Hi all,
We checking SOP with rough-cut plan
We created Rough-cut profile in mc35 for our bottle neck work center with base quantity -1 and time span - 1
then we selected new work center (there is no existing cap req). and assigned base unit measure:min.
and we assigned 1min for each day and saved the profile.
Now we went to mc88 and checked the material's active version production plan. (period split- DAY)
in View -> capacity situation -> rough cut planning -> show.
System calculates some capacity requirement for our production plan.
Say for tomorrow's date i given 1000 qty - production plan.
but system showing capacity req
Work center: TESTWC3 Plant: 0001 Capacity: 001
Info structur Material Plant Order qty Unit From To Capacity reqmts Unit
S076 TESTFERT14 0001 1000.000 EA 29.01.2010 11.02.2010 9000.000 MIN
with 9000min and cap load more than 652% ( Actuallly it has to show 1000min as per rough cut plan profile)
Our available capacity of work center per day - 1380 min
We cant understand the capacity requirement calculation in MC88..
Help us out...
Thanks in advanceHi,
Rough cut planning is genrally done for the group of material say product group, group of workcentre rather than individual material or workcentre.
As standard, in resource table whatever the value you enter that corresponds to no. of days. Each column represents one day.
Pl. refer this link for clear understanding of the same.
http://help.sap.com/saphelp_47x200/helpdata/en/a5/63212e43a211d189410000e829fbbd/frameset.htm
Madhava
Maybe you are looking for
-
Target a textfield inside a symbol?
I have a symbol called Rectangle and a text field called Counter on the stage. Inside the symbol I have another textfield called Counter2. For the .click event of the symbol I have: sym.setVariable("checker", "1"); sym.$("Counter").html(sym.getVariab
-
Can you share audio books in itunes match
I just signed up for Itunes Match and the upload is done but I don't see my audiobooks that are in my library. Any suggestions?
-
AirPlay Problems with Streaming Sources
When I tried AirPlay to stream from iPad apps to my ATV (2nd gen), I found that it works fine for media (video and audio) I have on my iPad memory but not for apps (Hulu Plus, Pandora, etc.) where the media source was itself being streamed to the iPa
-
Hi, I'm planning on purchasing the HDMI Digital A/V adaptor for the iPad 2. My quetion is: can you output the Audio via the headphone jack rather than the HDMI cable as I'm hooking it up to a projector and wish to send the audi to external speakers?
-
What ways of communication between two java apps you know?
Hi all Lame (but not for me) question. I have two java applications (first is web-app unning on server (tomcat or JBoss) and second is a standalone java app). Both are running on different JVM and both have to communicate with each other quite often