Rough Cut Issues in Premiere

REALLY FRUSTRATED!
So I send my rough cut to Premiere, then I drag my rough cut to the timeline, all seems to be fine. But if I delete that rough cut from the timeline it is no longer available to bring into the timeline again, it is just blank and error message "No content in sequence In/Out Range".
I've tried it with the "write XMP ID to files on import" checked and unchecked. I don't even know if this has anything to do with the rough cut, ugh!
Also, if I rearrange the bins I sent from Prelude in any manner whatsoever the rough cut is lost!
So frustrated I am beginning to think I have wasted months of time making rough cuts in Prelude,

Hey Michael,
Thanks for getting back to me so soon Sorry, I have to give you links to imgur for pictures of my desktop. I tried everything people suggested, but I still cannot get the insert link or insert photo on the forum to work, ugh!
The problem I was having yesterday is that the rough cut sequence file remains in the Premiere Pro Project Panel after deleting it from the timeline, but does not contain anything once it is deleted from the timeline, the thumbnail becomes blank/black and the rough cut footage cannot be brought back into the same or a different timeline without going back to Prelude and resending the rough cut and associated footage to Premiere. I was getting "No content in sequence In/Out Range".
http://i.imgur.com/74uBHvI.jpg
However, this morning I start up my computer, reopen Prelude and start Premiere project from scratch. Then I sent the same rough cut as yesterday to Premiere. This time when I drag the rough cut to the timeline Premiere makes a new duplicate sequence. That did not happen yesterday. I have no idea why as all settings are identical.
http://imgur.com/L0KirVB
*Note I put the additional sequence on the timeline cause I wanted to see if it was identical.
So, my next step was to delete the rough cut from the timeline and bring it back into the timeline. I get the same message "No content in sequence In/Out Range".
Then I repeated everything again, only this time if I double click the rough cut to bring it into the timeline instead of dragging it. It does not make a duplicate sequence.
http://i.imgur.com/YlfvQ2h.jpg
Then I delete the rough cut in the timeline and try to bring it back in to the timeline and get the "No content in sequence In/Out Range" message. So in order to have access to that rough cut again I have to go back to Prelude and have it send the roughcut and associated footage back into Premiere.
http://i.imgur.com/iQ9ozDY.jpg
All the footage used in the rough cut sent over to Premiere from Prelude is still accessible in the project panel after deleting the rough cut from the timeline. It is the rough cut itself that is no longer available once it is ingested into the timeline and then deleted.
My real concern in working with my rough cuts from Prelude is the stability of the rough cut. Once I start working within the roughcut footage and I decide to add, edit or delete clips am I going to have issues. If I have to start going back to Prelude to resend rough cuts then this will be a huge issue and it would just be better for me to start with my original footage as opposed to the rough cuts.
I hope this gives you a better understanding of the problem. If you need any more info or if you need to do remote access to my system please let me know. Thanks again!

Similar Messages

Rough Cut "send to Premiere Pro" opens PP but no files.

"send to Premiere Pro" opens Premiere Pro but the project is empty.
Also "append to rough cut" in Prelude is grayed out/unavailable.
I have uninstalled and reinstalled both Prelude and Premiere Pro but nothing has changed.
Checked for updates and there are none.
OS 10.6.8
Premiere Pro 6.0.2
Prelude 1.0

Do you have the Rough Cut open in the timeline panel? If the Rough Cut is closed the Append to Rough Cut command will be greyed out.
Does the File>Export command work to create a Premiere Pro project?
When you try the Send to Premiere Pro command and it fails, do you see any errors in the Window>Events panel?

Why won't my Prelude Rough Cut material appear in Premiere Pro?

I've done everything accordingly. I have my Rough Cut ready, but everytime I go to send it to Premiere Pro, it fails to do so.
What am I missing here? Is it my directory location that's the problem? I have no idea as to why it won't do as I say.

I'll get the image once I can obtain it - it's not appearing atm.
I have CS6 for both programs.
Yes, nothing happens when it's empty. There is a failure with the connection between the softwares. I also had this problem with trying to transfer files from Premiere to Speedgrade a while back. I never did find out the problem.
Is there a central hub or connecting device that provides this operation, because I have a feeling that that is what's stopping it from operating correctly.

Strange Green Playback Issues in Premiere Pro CC?

Hi, I'm having problems with some footage shot yesterday on a Canon C300. Was wondering if anyone could point me in the right direction.
I backed-up the footage, imported it into Premiere and made a few rough cuts. I then left it for the day and came into work today to carry on (so I thought). When I opened premiere I was getting this weird green problem anytime I try to play the sequence. I created new sequences & new projects and tried the footage again and still same issue. I then tried some other footage we had, that was shot on a C300 (.MXF). Same issue. I can open the footage in VLC and Resolve with no problems.
A video of the problem can be seen on vimeo:
https://vimeo.com/92148775 (password: ppcc)
My setup is:
Mac Pro 5,1 / 2 x 2.66 GHz 6-Core / 32 GB 1066 MHz DDR3 memory
PCI Cards (Internal)
Slot 1 ATI Radeon HD 5870
Slot 2 MiniSAS connection to external Cubix expansion chassis
Slot 3 Blackmagic Design Decklink 4K Extreme
Slot 4 SmallTree dual port 10GbE adapter
PCI Cards (External - Cubix Xpander Desktop Elite)
Slot 1 NVidia GTX 680 4GB
Slot 2 NVidia GTX 680 4GB
Slot 3 NVidia GTX 680 4GB
Slot 4 RedRocket
Any help would be greatly appreciated as I am really struggling (I'm not the most technical of editors).
Anything else you need to know, just ask!
Thanks

1. What card do you have?
2. Which drivers version are you using for the BMD card?
3. Mac OSX or Windows?
4. When the playback stops, do you see a small red icon down right in Pr's user interface and if yes, what does it say when you double click on it?
If i remeber correctly the Turn Off Dropped Frame Warning is a per timeline setting. I am not at the editing station now, so i can't check.
I assumed that 1280p50 was a typo in your first post and that you actually mean 720p50. Am i correct?
Four questions, four answers please!
/Roger

Rough cuts from Prelude lack audio source

Hey everyone,
this is my first project with a Prelude to Premiere Pro workflow and so far everything worked just fine.
Although after creating a couple of rough cuts in Prelude and sending them to Premiere Pro I am experiencing a problem with the imported audio:
All clips within a rough cut do not play back any audio even though they did in Prelude. I found out that after beeing sent to Premiere all clips seem to loose their audio track source.
So what I can do to relink my audio is to righclick->audio channels -> choose the right source. If I want to do this for multiple clips at once it will only work for clips shot with the same camera / format / channel names.
As I am working with footage of three different cameras I am trying to understand what's going on.
Has anyone of you experienced a similar issue?
Thanks for your help.

Xoxidine,
Prelude CC, the new version that has the new feature to automatically conform clips after ingest, will be shipping June 17. http://www.adobe.com/products/prelude.html
As to forcing a reconform, please try this:
Quit Prelude
Clear out your Media Cache Files folder, or if you can determine specifically the files to delete-- they're named in such a way you can tell which files go with which clips surgically remove the files for the clips you want to reconform
Mac: delete the .cfa and .pek files located in ~/Library/Application Support/Adobe/Common/Media Cache Files/
remember "~" indicates your Home directory. On my system this is located at /Users/wplate
another point: On Lion and Mtn Lion the Library folder is hidden by default. Hold the Option key while selecting the Go menu in the Finder and "Library" appears. Choose that and a window pointing to ~/Library appears
Win: delete the .cfa and .pek files located in C:\Users\<your user>\AppData\Roaming\Adobe\Common\Media Cache Files\AppData is a hidden folder. Once I was in \Users\Wes I then clicked into the address bar to type the AppData name and after hitting Enter that directory was opened.
It is also possible your media cache files are set to be elsewhere. The setting is in the Prelude preferences in the Media category.
Relaunch Prelude
Open the clip again, it should reconform
I tested this with Prelude CS6 on both Mac and Win and it worked for me on both platforms.

Rough cut on iMovie

Hi I have got a quick project to complete..
I am planning to have my rough cut on iMove then finalise it in FCP5.
I know there might be some problem when I import iMovie clips into FCP... but not clear of what they are.
I will be very greatful if anyone can give me a quick outline of what I should be aware....
Thank you so much in advance.
OH, the only reason I will be doing the cut in iMovie is because, at my client's environment, there is only iMovie to use and I have to work together during importing clips & the rough cut stage.
PowerBook G4 1.33 Mac OS X (10.4.3)

I highly doubt this will work. MANY reasons why:
-iMovie projects cannot be opened by FCP
-iMovie DOES NOT CAPTURE TIMECODE. That is HUGE for offline/online edits
-iMovie captures .dv files...very different than .mov files...again...no timecode.
And this footage will have to be rendered in FCP.
-iMovie edits destructively (or it did last time I looked) and doesn't allow for re-use of shots
In fact, I cannot think of one good reason...ANY reason to do what you are suggesting. It just plain won't work.
Buy Final Cut Express...or does FCE do timecode? I know you can't log and capture, and that it works with DV only...but not sure about the TC issue.
ANYWAYS. No. Don't do this.
#20 Using iMovie to Capture for FCP edit
Shane's Stock Answer #20:
iMovie handles the media differently from FCP, specifically where audio is concerned. So it is not a recommended workflow. Here's why...
iMovie captures using DV Stream (.dv) standard which does not use timecode. That is a big disadvantage over the way that FCP captures in that you can't go back and recapture the material at a later date if you need to revisit a project.
The DV/NTSC specification (the one FCP uses) also calls for seperate tracks for audio and video, even if you capture it as one clip. iMovie' DV stream format is muxed audio and video, which means that they are tied together (I can't get into specifics because I ain't no engineer or programmer). FCP is a bit more demanding and captures the seperate audio/video tracks, either in a single media file or as seperate video and audio files. With FCP you could capture video only or audio only because each is defined by the DV specs. while with iMovie you can't.
Also, if you drop the iMovie footage into the timeline, your will get the RED render bar forcing you to render the footage in order to see it...
"There's no need to fear, UNDERDOG is here!"

Problem in rough cut capacity planning

Hi,
I am facing following problem in rough cut capacity planning....
When the capacity is overloaded in a particular month then capacity requirement is getting passed on to previous month as shown below....int the month of MAY 2014 capacity is getting overloaded then capacity requirement is transferred to Previous month APR 2014... I don't want this...what can be done to avoid this....I want to see overload in month wise....Plz help
Thanks
Kumar

Hi Rupesh,
Thanks for your help...finally issue is resolved...making the changes in OPU4 done the job...in OPU4 we need to remove the indicator of scheduling for rough cut capacity planning ........now getting the results as desired...

Rough Cut Capacity Planning

Hey all,
i wanted to configure Rough Cut Capacity Planning in such a way that
1. i could view capacities of workcenters given that the demand (load) of planned orders could be executed in a particular period.
I accomplished this partially, meaning i could find out the bottlenecks on the workcenters but this was only on single material level, if i wanted to run this check on multiple the system, supposedly, offers me the option of using the product group, my question is, where do i view these bottlenecks on capacity IF i want to run RCCP on Multiple products.
2. i wanted to find out exactly how much i can produce in a period, given that the external and internal procurement lead times are incorporated this is usually reffered to as Master Production Scheduling, as far as i know atleast.
kindly shed some light on these matters.
Regards,
Danish
PS. i've seen similar posts to this but none directly addressing these issues hence i felt the need to ask these questions seprately.

to further clarify my question i would like to see, as a result of stimulative planning (RCCP):
1. Impact of Planning (planned order quantities) from ALL materials that were being planned on work centers used in recipes.
2. Identification of bottlenecks, which is of course the subsequent function from point 1.
3. Capability to produce with reference to Materials availability (lead-times being incorporated of components).

I only get one audio channel when i make a rough cut.

Hey everyone,
when I'm making a rough cut with my subclips in Adobe Prelude, he combines my two audio channels into one track. Even when i export my subclips to Premiere Pro I also get one audio track with two audio channels in it. What am I doing wrong?
I'm working on Mac and Prelude CC 2014 and Premiere Pro CC v8.1.
Can somebody help me?
Sven Jansen
Junior Video Editor
The Netherlands

Hi Sven,
You are doing nothing wrong here. If you will expand the audio track in both Prelude and Premiere, you can see that both the audio channels are in place. Its just the difference in the way the channels are being represented in Prelude timeline and rought cut.
Please let me know if you are loosing any of your audio channel.
Thanks,
Ramesh.

IMovie08 as a rough cut editor for FCE4?

Hi All,
(I know there was a reference by Euisung Lee on this topic but no replies are currently allowed hence this new post...)
http://discussions.apple.com/message.jspa?messageID=5317430
I'm interested in the experience of anyone using iMovie08 as a rough cut editor for FCE4.
Why do I want to do this?
* I love the sheer speed of putting together videos, even lengthy ones, in iM08.
* Also the integration with the iApps
* Love having an accessible skimmable library of all my DV
What I can't really live with in iM08...
* The poor titling facilities
* I've been trying the titling workaround noted in Karsten Shluter's website (ie. import a semi transparent TIFF or PNG from Photoshop and drag it onto clips). This works great except for one of my key projects where iM08 accepts the image file as normal, but doesn't display any overlayed image in the viewer.
* Also concerned about the loss in quality on export (for DV files)
So...I'm thinking about the following workflow...
a) import DV to iM08 (no loss in quality)
b) within iM08, perform rough cut video selections, and intersperse with image files from iPhoto (gives a documentary feel with video + stills)
c) export XML to FCE4
...I understand in this step that audio, transitions, KBE, adjustments, titles etc is lost in this process, but I'm assuming that the cuts and also the interspersed photos are retained
d) so then in FCE4 perform the titling, KBE on the photos, edit the audio and do any effects such as slowmo etc...
I'm hoping this is a 'best of both worlds' solution in that I keep the speed factor in pulling together the backbones of the project, but also gain the functionality of FCE4 for the other components.
My questions
1. Does this work effectively - has anyone tried it? Any traps which would make it more cumbersome than I'm anticipating?
2. Does FCE4 need to re-import or convert the original DV clips referenced by the iM08 XML. Does this duplicate the source files? Is there any loss of quality in the files then used in FCE4.
3. Following from #2, will the export quality from FCE4 be superior to what I'm currently getting in iM08? (Noting that the majority of my output needs to end up as a DVD...not yet living in Steve J's DVD-less world yet)
4. Has anyone run into the same titling/image overlay problems as I'm having with iM08.
A big thanks to the regulars who provide a huge source of great info here for us all...

Hi Joey,
thanks for appreciating my post ..
.. do you think using iM08 as a rough cut editor in this way could work?
I guess, that is a way..
when iM08 araised, in one of my posts, I said, skimming would be on my wishlist for FCE4 .. skimming is, imho, excellence in UI design.. a 'switchable' timelne in FCE (skimming mode/timeline mode) would really speed up editing.. (if speed is an issue )
.. it appears that this workflow would also get me around the iM08 export quality issue.
as far as I understand the process, there's no loss in quality in this process.. the xml is just 'in-/out data' (like Midi in audio processing) and you transfer/clone the raw imports from iMEvents to FCEproject... I'm not indepth will this workflow, I guess, you double the data = hdd space issues.. but, +you never have enough space while doing video+ ...
.. It sounds like putting KBEs into photos is harder in FCE than iM08
I'd like to phrase 'different' ..
less intuitive, but with much more options (e.g. rotation, transparencies, multi pic, drop shadows ...) and with more control (e.g. no automatic 'smoothing'/acceleration as in KB/iM, creating 'paths' of movement .. .)
with some craftmanship, you could create a slideshow looking like those 'Themes' in iMHD6/iDVD ...
fo sure harder, but imho .. better ...
.. _I assume_ that FCE4 would operate in the same way as FCE3.5
me too, vers3.5. here, no hands-on on vers4 ...

Error while creating Rough cut planning profile

Facing the following error while creating rough cut planning profile (mc35) in SOP for product group. "Work center x plant y does not exist for task list type 3". pls advise- do i need to create tsk list for product group? pls advise with tcode to be used.

pls check the (task list ) usage you have maintained in the Work center.
In OP45 , pls ensure that for the usage ,
task list type 3 (Rough cut planning profile) is included.
If it is not included there , pls include the TL type 3 for your usage and now the prob will get solved.
Regards.,
Sheik

SOP : Rough Cut Plan Creation

Greetings....
My client using Product Group for making Yearly Plan . Each prodcut group having around 10 group material .
There are around 30 product group . Planner makes year rough cut plan for product group and divide this product group qty into individual group material , month wise to make monthly plan.While doing this disaggregation into material qty , % of any material in its group is not fixed as some material may plan , may excess or may not be planed.
How can i do this in SAP , as there are variety of product group to be planned in each month .
How can i entered this rough cut plan in SAP ,.
Is there any Uploading method for such case for without defining desegregation , i can enter d the Plan into SAP.
Please guide me ...

dear Santosh..
Thats my question , how can i enterd plan without dessegration % . is thre any other option i have to propose.i already check with MC76
Edited by: SAP PP on Oct 20, 2009 12:20 PM

Error while creating rough cut plannin profile using Info structure

Hi,
I got the following error while creating rough cut planning profile for Info structure,
Capacity planning is not possible for this info structure S504
Message no. MA489
Diagnosis
In the planning parameters for info structure S504, no key figure for capacity planning has been entered.
Procedure
If you want to capacity planning to be possible for this info structure, you need to enter a capacity key figure in the planning parameters for the info structure in the Implementation Guide.
The info structure which i used here is created by me. Can any one help me to overcome this error
Waiting for your replies
G.Muthamil Murugan.

Hi addy,
Thanks for your reply. I have maintained the following Info structure which I created,
Under characteristic I have maintained the following,
1.Sales Organisation.
2.Sales group
3. Sales office
4. Distribution channel
5.Division
6.Material
Under Key figure I have maintain the following,
1. Order items
2. Production
3.Sales
4. Stock level
5. Target stock level
6. Day's Supply
7. available capacity
8.Target days supply
I don t know where i did mistake. can you correct me.
Regards,
Muthamil Murugan.G

Rough cut planning-sop

Dear Friends,
For doing roughcut plan for one finished good , first i have created versions as per product group.then next step is disaggregate to sub groups. then after to material. now i got planning qty's for particular material. to do roughcut planning as against material quantites i have created one rough cut plan by selecting one workcentre as constraint(via t-code mc35).After doing this system is giving message roughcut profile is generated. then i went for mc88 to look after my work centre capacity load. i am getting gray position on view tab. so that iam not able to click on the view tab to serve the desired.how to de-gray.
extras>capacity situation> ______view.
pls.suggest how to solve the problem or is there any settings involved at workcentre or routing level or any setting is needed to pop up view tab. it will be very helpful to me.

Hi,
Create a prod group using mc84.
create a rc plan using mc81.
create a rc cap profile using mc35, here give the base qty as 1, lot size etc...
Then in the resource , give the bottle neck workcenter . & enter the time to produce one piece in that particular work center.
use mc82, & choose the corresponding inactive version no.
In mc82 view, after checking the capacity situation(By choosing view, capacity situation, show) you can check the load for that particular resource. Once the load is 100 %. You can save it.
Use mc78, copy the inactive version no to active no. (a00).
Then in mc82 view, go to Extras,
transfer to demand management,
Choose the strategy as LSF/VSF... according to your scenario & then click transfer.
Hope this helps...
Regards,
Senthilkumar SD

Rough cut planning

Dear Experts ,
I have done foll setting :
Work center ugage : all task list type ( 009)
OPU3 : SelID:roughPlng 03
OPU5 : RCutPlg horizon 100
SelID:roughPln 03
Sche and general cap req is activated .
Created rough cut profile in mc35 after putting work center its not automatically proposing time . I mean SOP is done and it has not transferred to demand ( AS capacity planning is not done )
Secondly when I go to MC82 and check capacity situation there is blank , I mean show option is gray not selectable .
Please help .
Neal

My steps in Mc35
Entered prod group , plant + execute
Time span 30 days
Status 4
From Lot Size 1 to 9999
Usage 1
Clicked on lense Work center,Plant,Unit- ( tried min and HR )
after entering this there are just blank columns coming ahed of it and system wont let me save without entering values in those columen , I am suppose to enter some time or system will propose according to me SOP plan ?
Neal .

Rough Cut Issues in Premiere

Similar Messages

Maybe you are looking for