Rough type using LiveType ad FCE

I am using FCE3.5 and LiveType on a G4 Dual 1.42 and 10.4.7.
I am creating white type with a drop shadow and then placing that file in FCE over a motion video section. My type looks GREAT on my computer screen. When I make a DVD of it and play it on my 36" TV, the type looks rough all along the edges.
Type is about 42pt and I tried both Goudy and Arial fonts. I am exporting the QT with no compression and my video footage looks excellent and all other aspects of the video. But all my type is rough.
Any suggestions? Thanks!
Cheers! Gar
G4 Mac OS X (10.4.5)

Does this thread contain anything useful?
(14077)

Similar Messages

Speeding up issue between LiveType and FCE

Hello, would so appreciate help with this! - When I'm playing my project back in Live Type, it is the perfect speed. I save, then import the actual project into Final Cut Express, but it is speeding up and the clip is half the amount of time it is in Live Type - I have used livetype before without this problem and can't figure it out. Even when I save this particular file to .mov, it is sped up. Just did this with a number of files with no problems and can't figure out what I must have hit to make it do this

What is the frame rate of your LiveType project? Does it match the frame rate of your FCE Sequence?
-DH

Capturing HD video directly into my computer using HDD Cam & FCE 3.5

I have a JVC Everio GZ-HD7. Unfortunately, I didn't realize how "crappy" these HDD cams can be, in time to be able to return it. It records in 4GB sections, which is bad for me because I record at a studio and I can't have songs being cut off all the time and when trying to put together on the timeline on FCE, you notice the millisecond switch from one clip to another, including the audio skip. Now, I had a DV Cam (tape) which came with a program that I connected the cam to the comp using USB and could capture video straight into my computer's HDD. Is there anyway of doing the same thing with my JVC, which has Firewire and USB, using IMovie or FCE, or perhaps even another program (could be cheap too)?? I just need to be able to record entire clips and then edit them in FCE. The GZ-HD7 records in Full HD, 1440CBR and SD, but apparently 1440CBR is the "same thing" as HDV, which should work as if I had a HD Tape Cam. PLEEEASE and help! Ive tried looking everywhere but either I dont type in the correct keywords or there just isnt anything like that. I appreciate it!

i didnt read this topic too much but maybe youre not recording to the hard disk just the external medi drive... anyway... if your having trouble importing your clips... watch this vid...maybe this will help...
http://media2.jvc.com/camcorder/macHD.mov

Trouble importing LiveType into FCE

I am trying LiveType for the first time with my video. I have created the file in LiveType and then tried to import it into FCE. When I view the background in the viewer it looks great. When I drag it to my movie and try Insert I get an error that says "Edit Operation had no effect. Check the target tracks. You may need to open the source clip into the viewer in order to see all of the target tracks". It doesn't add it to my timeline. I can drag it to the timeline, but when I preview the video it says unrendered as it plays. It has the red line in the bar above it and everything else in my video is green. I have rendered the video in LiveType and also just tried the LiveType file...
Anyone have any advice? I am sure this is something simple...
Thanks for your help!!

Appears to be a problem in LiveType and FCE as of Leopard.
LiveType files created BEFORE Leopard was installed import fine, but files created AFTER Leopard was installed will not import and return an error:
File Error. 1 File Recognized. 0 Access Denied. 1 file unknown.
Live Type files that are rendered as movies are importable and that is the workaround. But of course they cannot be edited again unless the Live Type file is reopened and re-rendered.
IOW, no import of a Live Type file directly into FCE.
Pro apps download doesn't appear to apply to FCE and you need a FCP serial # to access it anyway.
All suggestions appreciated.

Goods Receipt Report With 101 movement type using bapi_goodsmvt_create

Dear Abapers,
i am getting some problem, i got requirement like Goods Receipt Report with 101 movement type using
bapi_goodsmvt_create and data should upload through excel sheet.
still facing problems, i have searched sdn forum n sdn code also, but relevant answer i could not find.
What are all the inputs i need to take and please give some valuable inputs to me.
please do help ..... thanks for advance..
Thanks & regards,
Vinay.
Moderator message : Spec dumping is not allowed, show the work you have already done. Thead locked.
Edited by: Vinod Kumar on Sep 27, 2011 10:58 AM

Dear Abapers,
i am getting some problem, i got requirement like Goods Receipt Report with 101 movement type using
bapi_goodsmvt_create and data should upload through excel sheet.
still facing problems, i have searched sdn forum n sdn code also, but relevant answer i could not find.
What are all the inputs i need to take and please give some valuable inputs to me.
please do help ..... thanks for advance..
Thanks & regards,
Vinay.
Moderator message : Spec dumping is not allowed, show the work you have already done. Thead locked.
Edited by: Vinod Kumar on Sep 27, 2011 10:58 AM

How to get the values from struct data type using java code..?

Hi ,
I am newer to java.
we are using oracle database.
How to get the data from struct data type using java code.
Thanks in Advance.
Regards,
kumar

Hi Rajeev,
To retrieve a FilterContainer you will need to traverse the report structure:
ReportStructure boReportStructure = boDocumentInstance.getStructure();
ReportContainer boReportContainer = (ReportContainer) boReportStructure.getReportElement(0);
FilterContainer boFilterContainer = null;
if (boReportContainer.hasFilter()) {
boFilterContainer = boReportContainer.getFilter();
} else {
boFilterContainer = boReportContainer.createFilter(LogicalOperator.AND);
Calling boDocumentInstance.getStructure() will retrieve the entire structure for the document.
Calling boReportStructure.getReportElement(0) will retrieve the structure for the first report of the document.
Hope this helps.
Regards,
Dan

I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

There is no more LiveType with Motion 5. You may want to go to the Final Cut Express forum, as that's the only place it's existed for the last few years.

Deploying a Reusable Workflow to a List Content Type using PowerShell

We have a situation where deployment of a reusable workflow for a site content type cannot be completed through the web interface due to the number of libraries where the content type is in use (time-out on deploy and update).
It was hoped that this could be accomplished with PowerShell but the method of deploying to a list content type appears to be different than it is to a list (all content types).
The below snippet works fine for a list / all content types:
function AddWorkflowToLibraries ($SiteCollection, $ctName, $WfName, $WfAssociationName)
$site = Get-SPSite $SiteCollection
[Guid]$wfTemplateId = New-Object Guid
#Step through each web in site collection
$site | Get-SPWeb -limit all | ForEach-Object {
$web = $_
$_.Lists | ForEach-Object{
if($_.AllowContentTypes -eq $true)
if($_.ContentTypes.Item("$ctName") -ne $null)
write-host "Enabling workflow on" $_.Title "in" $_.ParentWebUrl
$ct = $_.ContentTypes[$ctName]
$culture = New-Object System.Globalization.CultureInfo("en-US")
$template = $site.RootWeb.WorkflowTemplates.GetTemplateByName($WfName, $culture)
if($template -ne $null)
$tasklist = "Tasks"
$historylist = "Workflow History"
if(!$web.Lists[$historylist])
$web.Lists.Add($historylist, "A system library used to store workflow history information that is created in this site. It is created by the Publishing feature.",
"WorkflowHistory", "00BFEA71-4EA5-48D4-A4AD-305CF7030140", 140, "100")
if (!$web.Features["00BFEA71-4EA5-48D4-A4AD-305CF7030140"]) {
Enable-SPFeature -Identity WorkflowHistoryList -Url $web.Url
$wfHistory = $web.Lists[$historylist]
$wfHistory.Hidden = $true
$wfHistory.Update()
if(!$web.Lists[$tasklist])
$web.Lists.Add($tasklist, "This system library was created by the Publishing feature to store workflow tasks that are created in this site.", "WorkflowTasks", "00BFEA71-A83E-497E-9BA0-7A5C597D0107", 107, "100")
$association = [Microsoft.SharePoint.Workflow.SPWorkflowAssociation]::CreateListAssociation($template, $wfName, $web.Lists[$tasklist], $web.Lists[$historylist])
$association.AllowManual = $true
$_.AddWorkflowAssociation($association)
$_.Update()
else
Write-Error "Workflow Template not found"
AddWorkflowToLibraries <Site Name> <Content Type Name> <Workflow Template Name> <Association Name>
However changing the association as follows causes the script to still execute without a problem but the workflow doesn't appear for the content and the associations collection is empty:
function AddWorkflowToLibraries ($SiteCollection, $ctName, $WfName, $WfAssociationName)
$site = Get-SPSite $SiteCollection
[Guid]$wfTemplateId = New-Object Guid
#Step through each web in site collection
$site | Get-SPWeb -limit all | ForEach-Object {
$web = $_
$_.Lists | ForEach-Object{
if($_.AllowContentTypes -eq $true)
if($_.ContentTypes.Item("$ctName") -ne $null)
write-host "Enabling workflow on" $_.Title "in" $_.ParentWebUrl
$ct = $_.ContentTypes[$ctName]
$culture = New-Object System.Globalization.CultureInfo("en-US")
$template = $site.RootWeb.WorkflowTemplates.GetTemplateByName($WfName, $culture)
if($template -ne $null)
$tasklist = "Tasks"
$historylist = "Workflow History"
if(!$web.Lists[$historylist])
$web.Lists.Add($historylist, "A system library used to store workflow history information that is created in this site. It is created by the Publishing feature.",
"WorkflowHistory", "00BFEA71-4EA5-48D4-A4AD-305CF7030140", 140, "100")
if (!$web.Features["00BFEA71-4EA5-48D4-A4AD-305CF7030140"]) {
Enable-SPFeature -Identity WorkflowHistoryList -Url $web.Url
$wfHistory = $web.Lists[$historylist]
$wfHistory.Hidden = $true
$wfHistory.Update()
if(!$web.Lists[$tasklist])
$web.Lists.Add($tasklist, "This system library was created by the Publishing feature to store workflow tasks that are created in this site.", "WorkflowTasks", "00BFEA71-A83E-497E-9BA0-7A5C597D0107", 107, "100")
$association = [Microsoft.SharePoint.Workflow.SPWorkflowAssociation]::CreateListContentTypeAssociation($template, $wfName, $web.Lists[$tasklist], $web.Lists[$historylist])
$association.AllowManual = $true
$_.ContentTypes[$ctname].AddWorkflowAssociation($association)
$_.ContentTypes[$ctname].Update()
else
Write-Error "Workflow Template not found"
AddWorkflowToLibraries <Site Name> <Content Type Name> <Workflow Template Name> <Association Name>
The only change is:
$association = [Microsoft.SharePoint.Workflow.SPWorkflowAssociation]::CreateListContentTypeAssociation($template, $wfName, $web.Lists[$tasklist], $web.Lists[$historylist])
$association.AllowManual = $true
$_.ContentTypes[$ctname].AddWorkflowAssociation($association)
$_.ContentTypes[$ctname].Update()
But unlike the list version, the association doesn't appear to be saved and no error is generated.
Is anyone aware of what may cause this or have an example in C# that may explain something my script is missing?

Hi Garry,
After you associate the workflow to the content type, you should update the update the content type using
$ct.UpdateWorkflowAssociationsOnChildren($true,$true,$true,$false)
method.
Here is the completed script:
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")
$site=Get-SPSite "http://serverName"
$web=$site.OpenWeb()
$list=$web.Lists["ListC"]
$taskList=$web.Lists["Tasks"]
$historyList=$web.Lists["Workflow History"]
$ct=$list.ContentTypes["Link"]
$culture=New-Object System.Globalization.CultureInfo("en-US")
$wfTemplate=$web.WorkflowTemplates.GetTemplateByName("Three-State",$culture)
$associationWF=[Microsoft.SharePoint.Workflow.SPWorkflowAssociation]::CreateListContentTypeAssociation($wfTemplate, "myThreeStateWF",$taskList,$historyList)
$ct.WorkflowAssociations.Add($associationWF)
$ct.UpdateWorkflowAssociationsOnChildren($true,$true,$true,$false)
Here is a demo about how to update it using C#
http://www.thorntontechnical.com/tech/sharepoint/sharepoint-2010-associate-workflow-to-content-type-in-a-feature
Wayne Fan
TechNet Community Support

Transaction type used for FA posting to depreciation area 01 (ordinary dep)

Hi Expert,
There is a difference between my ordinary dep area 01 and book dep area 03.
area 01 is having a USD100
area 03 is having zero USD
I need to zerolized area 01.
I have created a new TTY and limit the dep area posting to 01 in OAYA. However, when I tried to post via ABZE, it is giving me an error message AA350.
Diagnosis
According to Table T093A, if you use transaction type 050, area 03 has to adopt values from area 01 (chart of depreciation TPGL). However, the specifications made in Table TABWA for the two areas do not agree.
Procedure
Maintain the transaction type using the Customizing menu. Both areas have to have either the indicator 'propose for posting' or 'has to be posted'.
I have checked both tables and it is not allowing me to post to area 01 only. I have done this before by creating a new TTY and post to area 02 and it works.
Please advise soon how to rectify this.
Thanks.
Angel.

Hi,
please check ion OABC if area 02 takes over the values identically.
regards Bernhard

How to create Image as Custom Property Type used in Configurable Web Part?

I wanted to create custom configurable web part property for Image.
Example - the screenshot of Image property used in Image web part is shown below:
My goal is to create as many images as possible in custom configurable web part.
I tried to write the code:
[WebBrowsable(true),
WebDisplayName("Example Photo"),
WebDescription("Example Photo of the user"),
Category("Custom User Profile"),
Personalizable(PersonalizationScope.Shared)]
public Image ExampleUserPhoto { get; set; }
However, the result does not display Image configurable web part property.
I wonder why the data type Image does not cause the custom web part to have Image configurable web part property.
Other data types such as Boolean, Enum, Integer, String and DateTime can be used.
How can I create Image as Custom Property Type used in Configurable Web Part?

I have examined that context node __00 has been enhanced,and has a class name z___00. But when I created a new attirubute by right click " Attributes" with wizard under context node __00.There is still a error message "view is not enhaced or copied with wizard".
But when I created a method "getvaliation " in the class of context node zcl__00, the attribute 'valiation' automatically created(at the same time the method "getvaliation' automatically created for the attribute 'valiation') and I need not to create attibute 'validation' by wizard . It seemed as if the problem is resloved. But when I make test for it in web ui .There is a runtime erro message.
Do I need to make some configurations in the business object layer for the checkbox? but the checkbox is only used as a flag to decide whether a backgoud job is needed to be executed.
Edited by: samhuman on Jun 22, 2010 10:31 AM

Changing Material Type using BAPI

Hi All,
I am trying to change a material. I able to change many fields of the material except 'Material Type' using BAPI_MATERIAL_SAVEDATA.
Did any one used BAPI_MATERIAL_SAVEDATA or any other BAPIs to change the material type of a material? I do not want to develop BDC for the same as of now.
Thanks in advance.
Regards,
Rama

Did you use BAPI_TRANSACTION_COMMIT after BAPI_PO_CHANGE.
Look also at this <a href="http://www.sap-img.com/abap/sample-abap-code-on-bapi-po-change.htm">Sample Abap code on BAPI_PO_CHANGE</a>
CALL FUNCTION 'BAPI_PO_CHANGE'
    EXPORTING
      PURCHASEORDER = T_POHEADER-PO
      POHEADER      = T_BAPI_POHEADER
      POHEADERX     = T_BAPI_POHEADERX
    TABLES
      RETURN        = T_BAPIRETURN
      POITEM        = T_BAPI_POITEM
      POITEMX       = T_BAPI_POITEMX.
READ TABLE t_bapireturn WITH KEY type = c_err TRANSPORTING NO FIELDS.
IF sy-subrc NE 0.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait = c_x.
ENDIF.
Regards

List of all the process types used in the creation of process chains

Hi Gurus,
I am new to process chains creation, can any one give the list of all the process types used in the creation of process chains and there uses also.
Please search the forum before posting a thread
Edited by: Pravender on Jan 4, 2011 4:18 PM

Hi,
As process chain is to automate the data load step.
For Ex:- If you are loading data from R/3 to DSO CUBE.
Here you require Info package to load till PSA.
DTP to load till DSO
Another DTP to load Cube.
And all other process like psa deletion AND process you can find in RSPC tab.
Thnaks,
Saveen Kumar

How could I Encrypt the data of SDO_GEOMETRY type using DBMS_CRYPTO package

Hi:
I want to Encrypt the data of SDO_GEOMETRY object type using DBMS_CRYPTO package.
What could I do? hope anyone can help me,give me a suggestions!
thanks in advance.
lgs

well, the spatial api would not be able to handle this data anymore, so what you are trying to do is converting an SDO_GEOMETRY to some cryptable user type (see http://download-uk.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_crypto.htm#sthref1506) and encrypting this.
Before using the SDO_GEOMETRY type will have to decrypt and reconvert it again and pass it to the spatial query or function.

Condition types used in cin

i have some confusion on cin
what are condition types used in cin with details
and where will assign TAXINJ and TAX INN please give me full details with example if any documents available please send to [email protected]
advanced thanks

<b>TAXINN:</b>
JEXP IN: A/R BED %
JEXQ IN A/R BED
JEAP IN A/R AED %
JEAQ IN A/R AED Qty
JESP IN A/R SED %
JESQ IN A/R SED Qty
JASS IN A/R Assessable Va
JIN1 IN A/R CST
JIN2 IN A/R LST
JLST IN A/R LST
JMAN IN Manual excise
JMOD IN A/R BED ..............................
Regards,
Rajesh Banka
Reward points if helpful.

Movement types used in these activities and also STO

HI SAP GURUS,
Movement types used in these activities and also STO ( PLANT TO DEPO), (DEPO TO PLANT ) WIT AND WITHIN 1 COMPANY CODES
AT PGI
AT BILLING
AT RETURNS
all possible ways OR any short cuts
points are to be rewarded for best relevent answer

hi
for PGI 601
for Returns 651
for Billing - None, because it is either copied from delivery or order.
What is a depo in your language? Is it a storage location,if yes, shop floor to storage location it is 911
for STO
If it is within company code STO, in the STO it is 101, during delivery 641.
it is intra company codes, then it is 101 in STO and delivery it is 645 or 647 (not sure)
goodluck.

Rough type using LiveType ad FCE

Similar Messages

Maybe you are looking for