Round 3 Digits before decimal in Chart and Table

Hi Guys,
Do you know where I can find the option/property in the chart and table to round 3 digits before decimal. Refer snapshot below:
For example, in below case Y axis original value is 40,000, 80,000 etc. but it should show on the graph and table without '000' 
Thanks.
Warm Regards Badal Ratra

Hi Badal,
After testing the issue in my local environment, we can refer to the following steps to achieve your requirement:
Right-click the vertical axis (or textbox in table) to open the Vertical Axis Properties (or Text Box Properties) dialog box.
Click Number in the left pane, then select Number under Category group.
Set “0” as Decimal places, select “Use 1000 separator (,)” and select “Show values in” with “Thousands”.
The following screenshot is for your reference:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

  • How to count the number of digits before decimal value

    Hi I've a decimal value like this
    123,456.700000000000
    I need output as 6 (because I've 6 digits before decimal)

    Try
    Declare @d decimal(30,9)=123456.700000000000
    SELECT FLOOR(@d)
    SELECT len(FLOOR(@d))
    Thanks
    Manish
    Please click Mark as Answer if my post solved your problem and click
    Vote as Helpful if this post was useful.

  • Chart and table in WAD.

    HI all,
    I want display web items  chart and table one below the other in web templet , but when I try to drop then one below the other in empty web templet , they are palce side by side automatically. how we can display then chat and table blow each other.
    hari

    hi reddy,
    i agree with Vineet.Alternatively u can also place your Chart and then next to chart press "Enter".
    The cursor moves down, then you can place your table.
    Either ways its possible.
    hope it helps,
    regards,
    Parth.

  • BEx WAD -- Creating Chart And Table on the same page

    Hi All.
    I am creating a new Web Application. This contains a dropdown with 2 reports to select.
    When the user selece report from the dropdown list, it has to display both Table and Chart for the report.
    Could you pls explain me how can I do this.
    Thanks
    SR.

    Go to Dropdown web item properties and choose your report and use Before Command and use OPEN_CHART_DIALOG. You may try with After Command also.

  • How to use different parameters for two tables(chart and Table) in one report in SSRS?

    Hi,
    Here is my requirement, i have 7 parameters in my report(Site,Account,LOB,year,Month,WeekDay and Date_Filter),
    and in my report i have one table and one Chart,
    my requirement is the table in the report has to show the data for 6 parameters only i.e(Site,Account,LOB,year,Month and WeekDay).so the table has to consider only 6 parameters, and it has ignore the 7th parameter, table should not consider Date_Filter parameter.
    And Chart has to consider all 7 parameters.
    so, when we preview the report table has to show the data for only 6 parameters and chart has to show the data for all 7 parameters.
    if there is a way to get this Please reply me ASAP, it is an urgent requirement.
    Thanks in Advance,
    Naveen

    Hi Naveen,
    Refer below link to create multiple datasets as suggested by Gnanadurai
    http://technet.microsoft.com/en-us/library/ff714047(v=sql.105).aspx
    Thanks
    Swapna

  • Toggle between Chart and Table

    Hi there
    ANybody know what I need to do in order to get the function SAPBCTToggleChartTable() function to work?
    In the standard template, if data is viewed in a graph, an option appears to view the data for that graph in table format. We would like to have that functionality included in our own template, but it doesn't work for me yet
    I have managed to copy the function and create a custom function. Added a link to call the custom function, which runs, but nothing gets updated on the page.
    I don't have a chart as a webitem displayed on my page, and am wondering if this is causing the problem. We have a chart defined as a library item, and this chart is loaded when the view is changed.
    Any ideas would be greatly appreciated.
    Cheers,
    Andrew

    I found I could do this quite simply using 2 of my own JAVAScript functions.
    The first function alternates from the graph to a table, and it simply issues the RESET_ITEM command on my table.
    The second function alternates back from the data table to the graph by simulating a click on the query view selection drop down (just resubmits the associated form).
    I then have logic in the page startup event to either hide or show the appropriate buttons.
    Relatively  simple, and best of all is that it seems to work quite nicely.
    Thanks for the advice though

  • BEx WAD - Creating a Web Template with Chart and Table

    Hi All. 
    I am creating a new Web Application. This contains a dropdown with 2 reports to select.
    When the user selece report from the dropdown list, it has to display both Table and Chart for the report.
    Could you pls explain me how can I do this.
    Thanks
    SR.

    Still the same way pretty much but you can view here:
    http://helpx.adobe.com/business-catalyst/using/add-blog.html
    You got all this: http://forums.adobe.com/community/business_catalyst/documents
    Which is on the overview page of these forums. And in there are links to 3rd party resources too.

  • Charts and Tables

    Can someone give a quick yea or nay ?
    Can I create a table with calculated values and have a chart built on that table ?
    All I can see in the help so far is copy and paste.
    Ta

    copy and paste I am sorry to report

  • How do you duplicate a chart and table? - not so obvious

    I have a table and a corresponding chart that I have customized. I want to duplicate the table and the chart.
    When I duplicate the chart, it still "links" to the original table. As I change the data in the duplicated table, it does not update the chart.
    How do I "link" the duplicated chart to the duplicated table?

    Christopher,
    Let me try again to explain, with a little more detail.
    In the Sheets Pane, click on the Sheet where the Table and Chart are that you want to duplicate and Right-Click, Copy. Then Right-Click, Paste. You now have two identical Sheets, each having a Table and a Chart linked to that Table, and the Table and Chart are twins of the one in the original Sheet. Now you may Drag the new copies back to the original Sheet, or elsewhere as you desire.
    Jerry

  • Alternate Drill on charts and table

    Hi all.
    I have a table with some dims and measueres.  For same I also have a garph.
    My requirement is that when i drill down or up on table, the table data should not change or drill and vice versa,
    i am using webi 3.1, and synch drill option is also unchecked.
    any workaround?

    Hi,
    By converting a dimension to a variable it will no longer show any drill indicators when a report block is in drill mode.
    simple create variable and use these in to your chart.
    If you have the administrator permissions then only you can drill the reports. Otherwise ask your admin to provide the drill permissions to enable.
    Try this
    Go to Infoview ->Preferences->Web Intelligence -> Drill Options
    Apply "Synchronize Drill blocks."
    This you need to do for each user in your repository or better you can search BOB to find some tool/utility through which you can do it for all users in one go.
    Hope it helps you.
    All the Best
    Madhu...

  • Using Hierarchy levels in Webi charts and tables

    Gurus,
    I am building a webi report that incorporates our HR employee structure.
    The Webi report is told to bring data for 'Level 1 and 2' of the hierarchy for the employee ID requesting the data.
    scenario
    Employee A
         Employee A1
              Emp A1a
              Emp A1b
         Employee B1
              Emp B1a
              Emp b1b
    If report runs for A, then return A, A1, B1.
    If reports runs for A1, then return A1, A1a, A1b
    etc.
    If I use the hiearchy in the Table of results for A1..  I can get everything looking nice.  However, If I then run for A, I get one line in the table...A's data.
    No hiearchy present i the table.  Sometimes the table is blank.
    Same is true if running for B1.
    We are running the initial  4.0 SP4 build.  Has any one seen this? know if its corrected in later builds?
    thanks
    jim

    This is BW data. 
    No need to restrict in Webi, the BW data is only 2 levels.  It is just which 2 levels...
    In the example above:
    The whole hierarchy is 3 levels, however when the user authorization runs, BW is asked to return Levels 1 and 2 based on the user ID.  so technically.. it is sometimes Level 1, 2, sometimes level 2 and 3.  sometimes only level3 (if lowest level user ID is run)
    I am thinking the Level selector is not knowing how to handle this movement up and down the hierarchy..
    jim

  • "curved/round borders" for free standing cells and table cells

    Webi 4.1 has border options such as dotted/ plan or double lined etc but is it possible to  "curve"  the edges of the borders in webi ?
    I tired to play around with the CSS styling sheet (Cell related section of it) but couldn't figure out what needs to be changed in order to accomplish this.
    Please provide feedback.
    Sheikh

    Hi Ayub,
    This feature is not there in BO.
    so that we cant curved/round border...........
    why you want curved/round border in cell
    Regards
    Mustafa

  • Charts and/or illustrations ruin the formatting on my ereader

    I've been downloading library books using the Adobe digital editions software for a few weeks now.  This is the first book I downloaded that had charts embedded in the manuscript.  Every time I come to one of the charts, the chart is reduced to a column of numbers, and the printing is scattered over several pages, and the font is limited to the smallest (extremely small) size.  It is extremely difficult to read - moving forward one page for a few lines, then back for a few more lines, trying to figure out where this section ends and what page to continue on. I am SHOCKED!!   After all these years, I thought Adobe was perfect!    Do you know if this is a regular problem with this software?  Or is it possibly my ereader causing this problem?  Is there anything I can do to correct it?

    It's most likely something in the HTML coding which is embedded in the epub file. From what I've seen ADE handles charts and tables as well as any ereader  (which is not saying much really).

  • Chart and Crosstab in a single control

    Post Author: Santhosh Natarajan
    CA Forum: Charts and Graphs
    Hi,
    Is there any object or way to have both chart and crosstab in a singe control ?
    any kind of help is appreciated.

    UPDATE:
    The customer names SHANGHAI and HEAT GB is present with two customer IDs each (not used here). Including the customer ID (hidden) in the query solves partly my problem, but both of these companies will show up twice.
    To solve my problem completely I want to have the values aggregated on customer name, not ID.
    I still think it is strange that the chart and table shows diffrent values, and that the chart does not sort in the same manner as it presents the values.

  • Chart and map in one tabpage of a web template

    Hello guys,
    Can anyone please tell me how to insert both chart and table in one tabpage of a webtemplate.I am working in version 3.5.With the code avalable i am either getting chart or table.
    Regards..
    Sanju.
    Message was edited by:
            sanju d

    You can insert Table and put in 2 rows
    In first row insert chart item and assign data providers = Query 1
    In second row insert Analysis item and assign data provider = Query 1.
    By table it will be easy for you to arrange this chart and map.

Maybe you are looking for

  • What is the best way to create an Hours of operation field?

    I'm creating a form in adobe central forms to gather information about my existing clients' business. One of the things I'd like to know is their hours of operation. I'm a real fan of the way Google does it: multiple labled drop downs in a table. How

  • Help me find my ipod please

    i lost my ipod touch in my friend's dad's car or in my room.. i looked everywhere in my room.. nd my friend say her dat looked in the car and didnt see it, bt i dont kno how thoroughly he looked but i kno its either in his car or in my room, because

  • Max no. of call-legs?

    Hi, I've a 2811 with a ISDN PRI to the PSTN and a PVDM2-64. The router is configured for receiving and making calls and is working fine. The problem is I never seem to be able to make more than 16 calls on my PRI. Can anyone advise where i should loo

  • Automate a Send (or a Bus)?

    What is the easiest way to select a CHANNEL SEND as an automation parameter in a track, and be able to toggle the send on and off during automation?

  • When making Path, Option click NEAR handle should grab handle, NOT make new anchor

    When making a path in Photoshop, if I have the basic Pen Tool, I often use Option on my Mac keyboard to temporarily get the Convert Point Tool, in order to adjust the handle protruding from an anchor point. I find it extremely frustrating that it wil