Round copper cored extension cable male/female

anyone have any links to UK shops for telephone extension cable (round copper core) male/female connections. I have tried 2 different BT shops, but they say they don`t stock them which I thought was weird
Thanks in advance.
. . . it must be remembered that the sea is a great breeder of friendship. Two men who have known each other for twenty years find that twenty days at sea bring them nearer than ever they were before, or else estrange them.

. . . it must be remembered that the sea is a great breeder of friendship. Two men who have known each other for twenty years find that twenty days at sea bring them nearer than ever they were before, or else estrange them.

Similar Messages

  • RCA Extension Cable - Male to Female a make that fits Inspire 5.1 speakers?

    Hi
    I want to extend the distance between my speakers and the subwoofer. I believe I have a Creative Inspre 5200 system. I bought some RCA male female extension cables but the male nad female ends were too long and did not fit either the jack on the end of the speaker cable or the input into the subwoofer.
    Can any one male any recommendations or provide sources to buy cable with the correct fitting male female ends?
    many thaaks
    Shelsey Walsh

    Creative offers many speaker systems that will fit your needs, without decoder.
    You mentioned the Inspire 5700 system; this system comes with a decoder/amplifier, and wouldnt actually be what you'r looking for.
    If your looking for awesome sound-quality, and good power, I can recommend the 5.1 Megaworks system, though this system can get quite expensive, you'll get what you pay for.
    The megaworks (like "all" other creative speaker systems, got a built in amplifier in the subwoofer, where you connect all the speakers.)
    To connect the speakers to the DVD-player, you connect the multichannel output on the DVD-player, to the multichannel input on the back of the subwoofer. (three stereo minijack inputs.)
    You may need some RCA-to-minijack adapters, so that the multichannel audio cable that comes with the megaworks, will fit on your DVD-players output.

  • Optimum extension cabling for 20-inch Cinema

    I need to add up to 2 meters distance between my MacPro and my 20 inch cinema display.
    Is there an extension cable on the market that combines the video/firewire/USB cables and thereby accomodate the original cable, or
    Do I have to extend these cables separately?
    I ran across a 3 meter extension for the video cable? Can I just connect this up and expect it to work or will some kind of booster or other active component be required?
    Can firewire & USB be extended 2-3 meters without ill effects?
    My ideal is a 2 meter extender cable that mates perfectly with the 3 functions in the original cable, and you just connect it up and go ... is this possible?

    Thanks. Your reference puts me on the right trail.
    The cited reference seems to imply there's a non-active version of the apple combo cable that would work for the 20 inch cinema ... but I'll be damned if I can find it. Hopefully I can get some direct feedback from Geffen about it.
    Careful measurements show that I really only need to extend my original combo cable 3 feet. Are you proposing that I just use one of their 'copper' DVI extension cables, a gender adapter and separately buy extensions for the USB and Firewire.

  • Male 30 pin to female 30 pin extension cable

    Does anyone know who makes a male 30 pin to female 30 pin extension cable or converter. Can't find one online and the reps at the Apple store were not helpful. I can't attach any accessories that need to be flush with the 60g IPod (such as the FM Transmitter, docking station) without taking it out of the case which increases the chance of scatching it.
    Thx

    If you just want something to lift the iPad a little and make it charge with other older style firewire based chargers, maybe you want this -> Scosche passPORT Charging Adapter for iPhone 3G
    A quick Google search shows results for the male to female 30-pin extension you described.

  • Is there an extension cable (lightning male to lightning female) that will work on audio? i have a lifeproof case on my phone and I cannot connect to my BOSE Speaker that has the lightning connector.

    is there an extension cable (lightning male to lightning female) that will work on audio? I have a lifeproof case on my iphone so I cannot connect to my BOSE speaker dock which has a male lightning connector.

    Passes through sync, audio AND VIDEO!!!  http://www.cablejive.com/products/dockXtender.html

  • Where to find a USB "full power" male/female cable?

    Last year i got an ElGato Turbo h.264 usb stick. It speeds up encoding. It needs to use the full power USB port so it won't work connecting it to your keyboard. ElGato included a "full power" male/female cable so the user doesn't have to reach behind the iMac all the time to plug the usb stick in and out.
    Does anyone know where to buy cables like this? I don't need a powered usb hub. Just a cable.
    thx
    lenn

    Hi lenn5
    Here are a couple of suppliers with 2.0 Extension Cables!
    [Cables To Go|http://www.cablestogo.com/productlist.asp?cat%5Fid=1512&sortType=partNum&sortDir=ASC&cm_mmc=AdWords-_-07-OKAY-_-u sbextension+cables_779087181-_-usb+extensioncables_Broad%7C-%7C100000000000000132659&gclid=CLrp9K7vl5ECFR-XiQodkxTHFw]
    [DCables|http://www.dcables.net/index.asp?PageAction=VIEWCATS&Category=131&gclid =COjWy8nvl5ECFRTOiQodKhWbIw]
    For more Google: "2.0 usb extension cable"
    Dennis

  • Mini-DVI extension cable?

    Has there ever been such a thing as a mini-DVI extension cable?
    I use an external monitor with my MacBook, so I have to use the mini-DVI to VGA adaptor. The problem is that I now have this big bulky VGA connector sitting on my desk just to the left of my MacBook.
    I figured that I would simply go buy a mini-DVI extension cable that would allow me to get the VGA connectors off of my desk. However, I have searched all over the Internet and found that such a cable does not exist.
    The only thing that comes close is a 1.8 meter Male-to-Male mini-DVI cable available from shentec.com (http://www.shentech.com/apmitomimato.html). But of course I need a Male-to-Female cable.
    Since the mini-DVI connector is primarily only used by Apple, it would be nice if Apple would build and sell mini-DVI extension cables in 2 or 3 varying lengths.

    Dang...
    I tried to see if CablesToGo could make a mini-DVI extension cable and this was their reply:
    {quote} +"Unfortunately we cannot build a cable like that. It is an Apple proprietary connection that we cannot obtain.+
    +We apologize for any inconvenience. "+{quote}
    I'll have to try some other companies...maybe newertech.com and Dynex. Anyone know of other companies that could make this cable?
    Pictures
    http://img176.imageshack.us/img176/9297/minidviadaptercr2.jpg
    http://img441.imageshack.us/img441/5157/minidviextensionsf3.jpg

  • Mini-DisplayPort Extension Cables

    Many, like me, discovered the cabling on the back of the 24" LCD Cinema Display is no where near long enough to reach a Mac Pro positioned underneath the desk. Not to fear ... you can get Mini-DisplayPort cables from both DataPro and Dr. Bott. I picked up one of each and they both work beautifully: http://tinyurl.com/l8w93o, http://tinyurl.com/ktburz

    Monoprice.com also offers the Mini-DisplayPort Male to Female extension cables in different lengths.

  • Isight firewire extension cable

    I need a 10 foot (or 3 meter) firewire cable that will fit the isight holder. Apple refers to this as a thin firewire and it must be able to snap in the transistion piece between the camera and the stand. Most aftermarket cables are too thick due to rubber caldding around plug. Has anybody found such a cable that fits??? Or maybe cut down the rubber to make it fit ? I am familiar with hubs and repeaters and it appears that firewire depot sells a male/female extension, but i'm looking for just the simple solution of a single cable.

    OK, so I've found a solution that, while not as simple and elegant as a single cable, solves my problem. After looking at male/ female cables at venders like L-COM.COM( which also sells a nifty shielded panel connector that also can act as a connector between the apple cable and an after market cable), I decided that this would work best with the short apple isight firewire cable so as not to go beyond the recommended distance for firewire without a repeater. Well, these short cables aren't cheap(20.00 to 30.00 bucks). Then add the male/ female aftermarket cable($ 30.00) and it's starting to add up. I also looked at doing a little grinding to the apple mount or adapter(depending on which you use) and shaving down the rubber overmolding on a aftermarket cable, and this looked like it might work. But the final solution was to buy a Griffin sightlight($20.00 through Amazon) that has a real short female receptical that allows me to use any 10 foot cable I wish. This way I spent the least amount of money and got a useful accessory to boot !!

  • Recommended extension cable for Apple LED 27" to MacPro 2010?

    Okay, from what I have read the cable on the 27" LED display is a bit short. I need to travel at least 5 feet from the desktop to where the computer sits. What do you recommend as an extension cable to help bridge the gap?
    A while back they suggested this:
    http://www.cpustuff.com/mini-displayport-male-to-mini-displayport-female-extensi on-cable.html
    Any other choices?

    Yup! I'm using 10.6.5 and see no problem with the cables.
    I've always assumed that if audio can come through a mDP of the card then it was a physical property of the cables themselves (e.g., appropriate additional connector pins and the connections to them) that determined whether they could carry that audio signal. In other words I don't see what difference the OS version has to do with it. If audio isn't coming out of the mDP from one update to the next then some configuration data (maybe what's in the sound system preference) has changed and audio shouldn't come out even if no extension cables are used.
    Also, I don't think any (pkg) installer, including system installers, are capable of updating the firmware in the video card.
    One thing I might suggest is resetting the SMC (http://support.apple.com/kb/ht3964). Sometimes that can "shake free" some of these sound "quirks"

  • Is there such a thing as a docking extension cable?

    Is there a female-to-female extension cable where one end would plug into an iPod classic and the other to a docking port? Not dock to USB connector; one where the iPod would be "docked" and held in your hand.

    I think you mean Female-to-Male extension. I was looking for one of these so that I could dock an iPod to the iHome without taking it out of the case. And yes there is, I have found two cables, one from CableJive and another found on eBay from Autoware302.
    I think the CableJive cable is good quality but very expensive, about $36. The Autoware cable is under 20 bucks. I have not bought that one yet, so I can’t talk about the quality.
    The OEM USB docking cable has a connector that is 1 1/32” wide. The opening in the OtterBox Defender case for my IPOD classic is the exact size for this connector. The after market products I have found are too wide to fit through the case. They do however fit through a Belkin Acrylic case that I have. The CableJive cable connector is 1 5/32” wide. I think the Autoware cable is 1 1/8” wide. Neither sounds like a lot, but it is significantly larger than the OEM connector. So I am still looking for the right cable for me. Anybody know of one?

  • Minimal extension cable for 30" display and macbook

    I want to use the 30" Cinema display with my macbook, and my macbook wants to be in my lap. This is incompatible with the medussa's head of cords coming out of the video cable and the display's power brick. All I need is about 4 more feet of extension for video cable ONLY -- I don't need to connect the firewire and USB cords from the monitor to my macbook. So my question is this: what is the minimal cord I need to extend just the dual-link dvi output a little farther from the power brick? Do I really need to spend $300 for the fancy 10 meter cables I see when I search for "DVI extension cable" ??
    Thoughts or advice, anyone?

    You can get a 3' or 6' dual-link DVI cable here for $30 or $40.
    <http://www.gefen.com/kvm/cables/hdmi_dvi.jsp#dvidl>
    Unfortunately it is male to male so you will need an adapter such as
    <http://www.worldofcables.com/oscatalog/CablesProduct/ADP-3770.htm>
    There may be cheaper ones, but make sure you get dual-link.

  • Dock extension cables for Mophie Juice Pak

    With all the cool docking devices for iPhone products and the popularity of the Mophie Juice Pak does anyone know where I can find or have a 30pin female to micro USB dock extension cable?  Removing the Mophie Case every night to dock in my Ihome alarm radio does not seem like a recommended solution when there are tons of other cables available :)

    Indeed i asked how to verify it...i would not ask if i was sure 100% about juice pack's fault. On the other side dock connector issues is the worse situation i could be in and there wasn't so much option about what eventually my phone, more over my juice pack it's actually faulty

  • Megaworks 550 Remote Control Extension Cable??

    Hi , does anyone know where i can get an extension cable for the remote control of Megaworks 550..it must be a 9-pin Mini Din but after hours of internet searching did not find anything..most are up to 8-pin.
    I Live in UK but if i can get one from abroad no problem.
    Thanks..
    P.S Wired remote!!! come on... :smileyindifferent:

    ello Vatman,
    I have just registered + saw your request 4 the extn cable,I am
    looking 4 the same thing. I thought of having the cable cut +
    a new cable soldered or joined inbetween but did not really want to
    do that until I got another wired remote but they wont supply them (yet?).
    I rang Keene Electronics 0870 990 9000 &
    they asked for an email [email protected] or a
    letter giving as much info as pos preferable with a
    photo and measurements. I have not got round to doing that as
    yet.Hope this is of some use,let me no if u have got the
    cable please(if so how and where) or if u have any joy,
    cheers, editman

  • I have a wired keyboard which won't work with my MacBook Air unless I use the extension cable supplied with the apple keyboard. Is this normal or have I got a connection problem?

    I Have an apple wired keyboard which suddenly won't work unless I use the apple ext cable supplied with the keyboard...used with the wire fixed into the keyboard it just won't respond.  Do u think the keyboard is faulty. ? I want to use it with my MacBook Air and a big screen.

    My best guess is that either there's a small deformation of the USB plug of your keyboard or some foreign matter (like lint) inside the keyboard plug. When I was setting up my new lab last year I had to use the extension cables and I found that the female end of the extension cable was considerably tighter than the computer's USB port. If an Apple store is nearby it would be worth taking the computer, keyboard, and extension just for piece of mind.

Maybe you are looking for

  • How can i cfp and nuke the device ??

    how can i cfp and nuke the device ?? my Z10 stl100-1 have a bb10-0015 error and i can't use link to reload it And more than one way can't fix this error autoloader can't connect to the device just ask me for my password  some one tell my the way to f

  • ADF menuTabs skin issue

    JDeveloper 10.1.3.3, ADF Faces Hi, I'm trying to create a custom skin for my ADF Faces application. I use this sample: http://www.oracle.com/technology/products/jdev/101/howtos/adfskins/index.html There is a code snippet: <af:menuTabs>     <af:comman

  • HT1692 sync between iPhone and Outlook 2007

    first time sync went perfectly well.  Now it doesn't sync anymore.  It seems to be synchronising, but it does not.  How come???

  • FOP and OC4J

    Morning Guys, i am in the middle of a developing an application in Oracle Framework that gives me the possibiity to show/print the result of the VO in PDF. Unfortunatelly when i run the page it gives me the following error message: XSL-1000: (Fatal E

  • BAPI FM for goods receipt

    guyz! can any one say me, is there bapi function module to create goods receipt and reverse the existing goods receipt? thnx manas