Round trip from photoshop or portraiture causes problems(TIFF)

And always has to be honest. 2 different computers, with this new LR build and and several before it. Mac OS latest everything and previous builds.. Macbook Pro and imac..
Edit in photoshop CS5 (and previous versions) as a TIFF, apply clone corrections and liquify fashion portraits. Save and close and re-open for some final tweaks in Lightroom. I still get erratic sliders, slow updates when moving sliders and jumping bars to previous values on TIFFs only. Even worse when i edit in Portraiture App and skin smooth, save tiff and return to lightroom. It takes a about 3 minutes to even show itself before editing, keeps flashing up then dissapearing again.
If i remove Tiffs that have been through photoshop or portraiture and synchronise the folder to import them back into Lightoom my problems disapear.. but its tiring. I now find myself using C1 more and more because the transitions between apps are smooth and problem free. However i prefer the flexibilty, speed and control of LRs functions
Others must be experiance this, it can't be fate this is happening on two different computers, old computers that have been replaced and previous versions of Mac OS and Lightroom.

Ernie, the photos are captured by Canon XTi so they are in CR2, saved to my internal HD and then "loaded" to Aperture as referenced files.
As for PS CS3, I am not sure whether I have it set up as a scratch disk or not (if you could let me know where to check it).
Yesterday, I did yet another round trip and found out that when I finish in PS and SAVE and CLOSE, then the file shows up properly in Aperture. What I was doing before was I SAVEd if but did not close. Then I would SAVE AS in PS to make sure I have some kind of a version of the file if the one in Aperture fails to work.
So it seems I cracked it but I would still like to hear what you have to say, or anyone for that matter. It seems to me that the SAVE-CLOSE is crucial.

Similar Messages

When round tripping with photoshop cc, i get a saved psd file with my original raw,the problem is these are high file sizes and taking a lot of space,can i stop this?

when round tripping with photoshop cc, i get a saved psd file with my original raw,the problem is these are high file sizes and taking a lot of space,can i stop this?

That's not the workflow that I use. I have my Lightroom preferences set to create TIF images when going to Photoshop. I keep the original raw file and the TIF image (usually reduced to an 8-bit image) and only export JPEG's when they are needed to send to a lab or to send to someone over the Internet. JPEG files are highly compressed. I only create them when they are needed, and they are discarded as soon as they have been used for their intended purpose. I keep the raw file and the Photoshop-created TIF in my library. This requires extra disk space. But I always have the highest quality files available.

Trouble with the round trip from Color to Final Cut Pro

I have edited a home movie together. I then have sent the sequence to Color for grading and then after completing the Color changes and Rendering. I sent it back to Final Cut Pro. It starts out working fine but during the transfer process it stops at somewhere between 50% and 60%. It is during the "Importing XML Data" phase. It just sits there and does not change and I have to force quit to get out of it. The exact same thing happens when I try to round trip from Soundtrack Pro 2 back to Final Cut Pro. So I am unable to make use of the changes I make in these programs.
This is a round trip process that I have successfully made many times before. Nothing has changed. I am working in Final Cut Studio 2 with the latest updates on an Intel Mac. Any advice on how to remedy this situation would be greatly appreciated.
Thank you in advance.

Hard to say where the XML interpretation is getting lost... That it stalls at 60% could mean a number of things. If you have a cuts and dissolves simple timeline, that should not be an issue. Something is causing a corruption, though and it could be a media type, a filename (which can break folder paths), a filter or motion tab which generates an invalid value, or a recompression that violates the sequence settings.
At this point, I start cutting up the original sequence and roundtripping it until it works, or breaks and then try to figure out what's different. Often there's something hidden like an imbedded recompressor in a nested sequence or something like that, that will allow COLOR will load, grade, render, and then not know what to do to re-write the export XML, or re-imbed it illegally.
There are a lot of things that FCP does that editors take for granted that COLOR utterly cannot cope with -- but may deceptively carry along and then crash on the next step.
jPo

Trouble with the round trip from Soundtrack Pro 2 to Final Cut Pro

I have edited a home movie together. I then have sent the sequence to Color for grading and then after completing the Color changes and Rendering. I sent it back to Final Cut Pro. It starts out working fine but during the transfer process it stops at somewhere between 50% and 60%. It is during the "Importing XML Data" phase. It just sits there and does not change and I have to force quit to get out of it. The exact same thing happens when I try to round trip from Soundtrack Pro 2 back to Final Cut Pro. So I am unable to make use of the changes I make in these programs.
This is a round trip process that I have successfully made many times before. Nothing has changed. I am working in Final Cut Studio 2 with the latest updates on an Intel Mac. Any advice on how to remedy this situation would be greatly appreciated.
Thank you in advance.

Make sure your easy setup has the correct frame rate for your sequence. Seems crazy but somehow or other fcp assigns a frame rate to audio files. I've found this can sometimes be tricky to get right. Here's what I've done to force the issue. Make sure the easy setup frame rate reflects that of the target sequence in fcp. Create a new project. import the audio in the new project. And then copy the clip from the new project to your main project.
Good luck

Round trip from Aperture to PS CS3 and back problem

Hi everyone; I hope someone can help me to solve this. I posted it before but the only suggestion I got was to check if the processed photo is not stacked under, which it isn't.
I have PS CS3 set as my external photo processing app (exports are PSD 16-bit 300 dpi) in Aperture 2.1.1. When I process the picture in CS3 and then save it(mind you I only SAVE, I do not do SAVE AS) as PSD (or TIFF) Aperture only shows me the original file in preview with the little circle informing me about the round trip to CS3. So the processed file does not show. Instead I only see two identical versions of the same photo or a layer from CS3.( I mean, I see the master and the version with the little circle).
If I save the work in PS CS3 as jpeg and then import into Aperture, it shows fine. When trying to import the processed and saved PSD and TIFF files, Aperture only shows the original file.
If it helps, I am working on layered pictures (HDR) where I use different parts of different pictures to get wide dynamic range. I export 3 or so photos from Aperture at once to CS3, process them into one, flatten the picture and save it.
And then Aperture just shows me the original file as version. I really need your help with this.
I have done this before 2.1.1 and it worked. Not sure if I have changed anything that might be causing this.
Thank you for your ideas.

Ernie, the photos are captured by Canon XTi so they are in CR2, saved to my internal HD and then "loaded" to Aperture as referenced files.
As for PS CS3, I am not sure whether I have it set up as a scratch disk or not (if you could let me know where to check it).
Yesterday, I did yet another round trip and found out that when I finish in PS and SAVE and CLOSE, then the file shows up properly in Aperture. What I was doing before was I SAVEd if but did not close. Then I would SAVE AS in PS to make sure I have some kind of a version of the file if the one in Aperture fails to work.
So it seems I cracked it but I would still like to hear what you have to say, or anyone for that matter. It seems to me that the SAVE-CLOSE is crucial.

New browser window from CRM Web UI causes problems

Hi Experts,
We have several links to internal web sites that CRM users can access from the web UI. Problem is, whenever one of these links are selected, the user looses whatever it was they were doing in CRM and the main window displays the following message:
The object you have selected is starting in a new browser window. You can continue working normally in the current application. However, you may have to navigate back to the page you were working on.
Anyway to prevent this from happening? Would very much appreciate any advice.
Thanks,
Stephen Brewer

Hello Brewer,
If your requirement is to open some URL say google.com etc in a now window, then there are only 2 ways
1) Use Transaction Launcher
2) Use PopUp Window.
1) If you use transaction launcher, and created the link in your direct link group then on click of the link, the URL will open in new window but you cant avaoid the message that you get in the current window. Also, if users POPUP Blocker is ON, user will never come to know why the new window has not launch.
2) This is very simple and straight forward approch for opening URL. However, POPUP windows in WEB UI are modal windows, so say on click on a button on Account Overview Screen, i open google.com in a popup then unless i close this popup , i can not work on the account overview screen . However, you can see the account overview screen as it is and you can resume back when the popup is closed. Also you can define the even handler on close event of pop up so you can pass the data to & fro between the webclient view and the pop up.
to open some extrenal URL in a PopUp , You will need to create a blank view and attach it to a window. In .htm file of the view, you can use tag IFRAME and call your external URL here.
Hope its helpful.
Thanks & Rregards
Prasad
PS : the popup blocked problem will still be there however, it flashes a message like pop up blocker is ON in case of using popup window

Trigger server round trip from input field

HI,
I have a normal input field with F4 help. I am trying to trigger a server round trip after selecting a value using the value help. I tried with the following code in the P-getter method , but is not working.
when iv_property = if_bsp_wd_model_setter_getter=>fp_server_event OR
           iv_property = if_bsp_wd_model_setter_getter=>fp_onclick.
    rv_value = 'myeventname'
is it because the fp_server_event or fp_onclick are only valid for a dropdown and not for a normal input field as in my case ?
Please help.
regards,
Amrit.

Amrit,
I too checked now, there is an importing paramter. Try using code like this
CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
    EXPORTING
      iv_help_id        = 'CRMD_PRICING-CURRENCY'
      iv_help_id_kind   = if_bsp_wd_valuehelp_f4descr=>help_id_kind_comp
      iv_input_mapping = lt_inmap
      iv_output_mapping = lt_outmap
      IV_TRIGGER_SUBMIT = abap_true.
Thank you Bhavishya for the tip.
(I dint try it yet.)
Regards,
Masood Imrani S.

Transferring images from Photoshop to Imageready (color problem)

Hi,
I've noticed that when I place one of my Photoshop images in Imageready (to create a new web page), the color is different when the image is in Imageready. It seems to lose vivrancy and saturation. The photos are of my artwork, so I really care about the color being correct.
Does anyone know what I could do to help this problem, or if I have a preference wrong or something?
Thanks,
Allan

the short answer:
calibrate/profile your monitor to 2.2 gamma, d65/6500
convert to sRGB before going to ImageReady (or Save for Web)
http://www.gballard.net/psd/go_live_page_profile/embeddedJPEGprofiles.html

Round trip to Photoshop

After I have perfected an image in Aperture and I wish to do more work on it in Photoshop I use the export to external editor command. Once the changes are made I save back in Aperture. The reimported image prints differently. Do I have to assure that settings in both Aperture and PS are identical so no changes made along the way? For instance do both programs have to be set to 16 bit mode or both set to Adobe RGB 1998? Many filters in PS CS2 cannot be used unless the image mode is set to 8 bit. Do I have to change it back to 16 bit before saving back into Aperture?

I've not used 8-bit filters/effects without converting back to 16-bit before saving. I assume an 8-bit version would look somewhat more crayola crayony (as in more towards sRGB). Is this what you are seeing?
As a check, create a new version and roundtrip, make similar adjustments in CS2 and convert back to 16-bit. See what differences you see. I would expect some.
G.

Audio from Sony EX1r Camera will not round trip from Audition

With Premier CC15 the audio from my Sony EX1R Video Camera comes back from Audition after the edit just as a loud buzz. It works fine in Premier 6 and also CC. My Panasonic camera Audio, as well as all others work fine.
Can someone help?

Giving up? Four product releases in nine months. That's a pretty aggressive development schedule for a new product.
Motion is a separate development track and always has been. Roundtripping to Motion was not available in its first releases. Apple has taken a new approach with publishing and rigging, which has great benefits. It basically meant that the entire effects, transitions, generators, and titling architecture didn't have to be rebuilt in FCP and that the two applications can work together. There are a lot of things this allows. For instance, if you want to add effects from Motion to clips in FCP, roundtripping is quite unnecessary; simply publish the effect with the parameters you need and apply the effect inside FCP.
Roundtripping is really useful for a lot of things and will probably be implemented. In the interim third party soluations using XML hooks are available.

Round tripping from Premiere CC to Audition CC back to Premiere-no video

My last big project was on Adobe CS6 and roundtripped from Premiere to Audition and back to Premiere and it all worked out great. Been doing the recent project with Premiere CC to Audiition CC. Made the audio adustments in Audition, saved, etc and went to export under Multitrack>Premiere Pro(and keeping the individual stems). When I saw the new sequence in PP project panel and opened it up, but all I got were the edited audio tracks, but no video. I tried it three times and the same thing happened. I can't send out the finished movie without the video. And I won't start over and copy and paste the video over the new audio sequence(still on seperate video tracks before the final tweaking). What was changed from CS6 to CC?

Not a direct reply to your question but...
I have only exported video to Audition as a reference track- preferring to use the PP timeline for the master export. I somehow feel it's less prone to image quality loss (codec dependent!)
To that end, I add the imported Audition mix-down either as a single or multiple stems, depending upon the project requirements, and place them in sync in the original timeline.

Will upgrading from Panther to Tiger cause problems with Fink?

I've just spent quite a bit of time setting up mysql via Fink on Panther.
I'm considering moving to Tiger, but it would be really annoying to have to do it all again.
Are there likely to be problems with Fink packages installed under Panther?

Don't know, but suggest posting to the Unix forum under OS X Technologies.

Would going from xp to vista cause problems?

I have a 2nd gen nano that was set up on an old pc running XP.
I have now backed up my library on to an external hard drive in order to use the nano with my daughter's new laptop (which runs on Vista).
This is all working fine, but when I sync the nano on the laptop, an error message comes up at the end saying " do you want to scan and fix this i pod? there might be a problem with some files on this device or disc". it then recommends scan and fix, but when i click to do this another message comes up saying " the disk check could not be performed because windows cannot access the disk".
It syncs fine but the message comes up every time i connect the i pod!
Could this be anything to do with the change between xp and vista?
help!!!!

Router has nothing to do with the operating system.If the router is configured then,you do not need to do anything on the router.Just connect the computer to the router and it will work.

Trigger round trip in parent view from called view on close event

Hi Experts,
We have a requirement in which from my view.htm page on click of a button (using onclientclick) I am opening another view using window.open of javascript.
Now in pop-up after processing it, i am using self.close to close the pop-up, before this point I am setting collection of calling page in on_request method of pop-up page controller class, but it does not reflect after pop-up has closed. though it reflects on any round-trip on the calling page.
How do I trigger round trip from pop-up after Self.Close from htm page?? Or from do_request method?
I am trying to use opener.location.reload, but use of opener gives permission denied javascript error.
Please help, I am really stuck here.
Thanks,
Rohit
Edited by: Rohit Khetarpal on Mar 25, 2010 1:29 PM

Still no replies no one using BSP now a days?
I have one more doubt, in addition to above, I am coding in IC Web 5.0 application (CRM_IC), one of the z-views i created in z-bsp application (Z_WW_CRM_IC), where i have input field using CRMIC bsp tag in Search View.
Now, I am opening another view in Pop-up using Onclientclick of button (as mentioned in above post too), but in the view URL, i need to send values that are entered in the search view, how can i do that.
I have tried in javascript, var val = <%= <contextnode>->get_country( attribute_path = 'country') %>;
but it doesn't work, it works only if there already has been a server round trip!
Any help is highly appreciated.
Thanks,
Rohit

TIFF round trip between A3 and PS CS5

Hello, I have one question that's been bugging me for the last few days.
I set Aperture 3 to use 16 bit TIFF files for round tripping between A3 and Photoshop CS5. When PS opens it actually calls Camera Raw. I then open the file do the adjustments in PS and save the final image. However, when I go back to Aperture, Aperture does not update the preview of the final image. If I set Aperture to use PSD files the round trip works great, but with the PSD file I cannot invoke Camera Raw from within CS5 when using smart objects.
Has anyone experienced this before? am I doing something wrong?
Thanks!!!
Mariano

Photoshop in the normal course would not call Camera Raw for dealing with the TIFFs sent for external editing -- have you set something in Photoshop CS5 to cause all TIFFs to be opened that way?
Since Aperture adjustments will do everything the camera raw display can to in Photoshop, it seems little benefit would come from then using the camera raw display in Photoshop for anything coming from Aperture for editing?
I use TIFF as the format to send to PS CS5 for editing and all is working fine, btw.
Ernie

Round trip from photoshop or portraiture causes problems(TIFF)

Similar Messages

Maybe you are looking for