Round trip to CS4 has me trippin'

This issue only seems to effect images from my old D60 (which I no longer use) and from my G7 (which I mainly use under water). Also, it only occurs when using CS4: If I switch my external editor back to CS3, it doesn't happen.
When I do the round trip, my work in photoshop doesn't show. (With some images, regenerating the the thumbnail fixes it, but this doesn't always work.) Here's where it gets weird: if I quit Aperture and relaunch, the round tripped image doesn't show up at all. The original is there and it tells me it's in a stack of ONE. However, the photoshop document is there in my referenced folder with all my work in tact.
Now I've discovered that it only occurs on one of my referenced drives but still only in CS4 and only with files from those cameras. That drive is properly formatted and Disk Utility says it doesn't need any repairs. Additionally, I've done a consistency check, rebuilt the library and repaired permissions.
I can work around this, but I don't like unsolved mysteries.
DLS

I was trippin' so bad that I used "effect" as a verb. (one of my pet peeves)
I will write 100 times: "Effect is a noun. Affect is a verb"
dls

Similar Messages

  • Aperture 3.03 & Photoshop CS4 round-trip

    I'm trying to make a round-trip between Aperture 3.03 and CS4 Photoshop.
    Background: I've chosen CS4 Photoshop as my external editor - 16-bit PSD
    Problem: When I select an image and "Edit with CS4", I successfully launch the image in CS4. I made a filter change (Lens Correction) and then did a "SAVE" within CS4. The PS version appears "very briefly" within Aperture 3.03 and then disappears.
    Attempt at a solution: Tossed "com.apple.Aperture.plist" preferences file and re-launched Aperture.... result - CS4 edited version still disappears in Aperture browser window.
    Any suggestions?
    Thank you.
    Dale

    Ensure maximise compatibility is checked when you save the psd file.
    Ensure you're in RGB colour space.
    What happens when you quit and re-open aperture does it show for a second or stay disappear - does it show a dotted outline? Can you open the file in full screen?
    Thanks
    M.

  • Trouble with Round trip between Soundtrack Pro 2 and Final Cut Pro 6

    I have edited a home movie together. I then have sent the sequence to Color for grading and then after completing the Color changes and Rendering. I sent it back to Final Cut Pro. It starts out working fine but during the transfer process it stops at somewhere between 50% and 60%. It is during the "Importing XML Data" phase. It just sits there and does not change and I have to force quit to get out of it. The exact same thing happens when I try to round trip from Soundtrack Pro 2 back to Final Cut Pro. So I am unable to make use of the changes I make in these programs.
    This is a round trip process that I have successfully made many times before. Nothing has changed. I am working in Final Cut Studio 2 with the latest updates on an Intel Mac. Any advice on how to remedy this situation would be greatly appreciated.
    Thank you in advance.

    Thanks.
    What's I've been doing is exporting the Soundtrack files as AIFF files, then importing them into Final Cut...
    It's working... at least well enough. Still seems harder then just being able to go back and forth between the two applications.
    Thanks for the advice.

  • Best workflow for round trip editing?

    I understand that iPhoto does not support (yet) round trip editing, i.e. a RAW file can be sent from within iPhoto to an external editor but the resulting edited file cannot be saved back directly into iPhoto but has to be temporarily stored somewhere (i.e. desktop) and reimported into iPhoto using the Import function.
    However,this screws up my "roll" filing structure, because the imported file is now part of a new roll and cannot be moved back to its original one.
    Sure, I could process my photos before importing but this only postpones the problem. Indeed, next year, there will be an other iteration of Nikon Capture with new features and I will want to reprocess some old files to get better results ... and they will have to be reimported into iPhoto!
    Has anyone come up with a suitable workaround that allows an imported file to be part of an existing roll or a solution to merge 2 rolls?
    Thanks
    Michel

    Solved!
    It's again RTFM ("Read The F*ng Manual").
    Workflow would be as follows:
    1. Edit RAW photo from roll, say "Xmas '05", with external editor.
    2. Save modified photo as jpg version (so that the modifications are visible in iPhoto) to desktop.
    3. Import into iPhoto (this creates a new roll, say "Roll 112", number is automatically assigned by iPhoto)
    4. Select all photos from "Xmas '05" and "Roll 112" in the iPhoto library
    5. Select Create New Roll from the File menu (all photos are now combined in a single roll, say "Roll 113" with today's date)
    6. Rename Roll 113 into Xmas '05 and change the date to keep the chronological sequence
    Voila! Roll "Xmas '05" has been updated (just tried it. It works).
    I should have completely read the manual before posting.

  • Re: (forte-users) Round-trip database design

    We have used Erwin quite sucessfully, but it's not cheap.
    "Rottier, Pascal" <Rottier.Pascalpmintl.ch> on 02/15/2001 04:51:01 AM
    To: 'Forte Users' <forte-userslists.xpedior.com>
    cc:
    Subject: (forte-users) Round-trip database design
    Hi,
    Maybe not 100% the right mailing list but it's worth a try.
    Does anyone use tools to automatically update the structure of an existing
    database?
    For example, you have a full database model (Power Designer) and you've
    created a script to create all these tables in a new and empty database.
    You've been using this database and filling tables with data for a while.
    Now you want to do some marginal modifications on these tables. Add a
    column, remove a column, rename a column, etc.
    Is there a way to automatically change the database without losing data and
    without having to do it manually (except the manual changes in the (Power
    Designer) model).
    Thanks
    Pascal Rottier
    Atos Origin Nederland (BAS/West End User Computing)
    Tel. +31 (0)10-2661223
    Fax. +31 (0)10-2661199
    E-mail: Pascal.Rottiernl.origin-it.com
    ++++++++++++++++++++++++++++
    Philip Morris (Afd. MIS)
    Tel. +31 (0)164-295149
    Fax. +31 (0)164-294444
    E-mail: Rottier.Pascalpmintl.ch
    For the archives, go to: http://lists.xpedior.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

    Hello Pascal,
    Forte has classes which might be able to scan the database structure
    (DBColumnDesc,etc.). Express use this classes to determine how the
    BusinessClass looks like. We use Forte to create the tables,indexes and
    constraints. We have the Problem that the above described classes are only
    readable but not fillable. The solution for us will be to create our own
    classes in
    the same manner than existing classes are. So we are able to make updates in
    the database structure and maybe able to change the database tables with tool
    code. Another reason for us to have the database structure in the
    application is the
    ability to see the table structure on which the Forte code works always up
    to date
    with the code. You are always able to compare the structure of the database
    with
    your businessclasses and able to convert a wrong structure to the correct
    structure
    with maybe just a little piece of code.
    Hope this helps
    Joseph Mirwald

  • Round Trip form Preiemer to Audition more than Once

    Hoping someone can help.  I am struggling to work out how to send a project back to Audition more than once?  Basically I have a job that I sent from Premiere to Audition already but the client has come back with some further edits.  What I can't work out is how I can send that project back from Premiere to Audition for a second time once I have made the various edits requested Premiere so that I can just tidy up those bits back in audtion again.  At the moment it seems like I will have to try and re do all the work I had originally done in Audition or try and copy and paste clips form one Audition project to another and re align all the wave forms.
    I am sure I am being stupid and missing something really basic so if someone can shed any light on how I can do this that would be great.
    Thanks in advance.
    Mark

    Hi Alan
    Your right the files are there but all as separate wav files that were created when the Audition project was first created and I have the original Audition timeline that was created when I first sent the project back to Premiere. What I can't seem to figure out though is that when you send the project back from Premiere to Audition the new audio tracks that were created don't link back to the originally extracted wav files or the Audition Project that created them.  Instead Audition creates a new wav file for each complete track (for those tracks that came from Audition first time round).  However if you click on one of the single track clips from the original Audition to Premiere round trip and choose edit original it opens the original Audition project with all the clips in that created. Which isn't the behaviour I was expecting  I was hoping for something a bit like the dynamic link relationship between after effects and premiere so if you have round tripped your audio any further changes in premiere are reflected in the audition project or a copy of the audition project. Is there away of doing this?
    Thanks

  • Read data from STATIC internal table during round trip in DO_PREPARE_OUTPUT

    Dear Gurus
    I have a requirement where I need to select some data from the database table BUT_HIER_NODE_D.
    After SELECTING this data to an internal table (say ITAB), I am displaying this data in a table view. I was able to achive this functionality by putting some code in the DO_PREPARE_OUTPUT method.
    Now according to my requirement, after the above data has been displayed on the screen initially, the user will click on any row. After clicking on a particular row, I need to capture the document number on that particular row and need to display all its child document numbers in a separate table. I am able to achive this functionality also.
    Initially I am not sure of how to READ the same internal table (ITAB) again and again by avoiding the SELECT query upon each round trip (between CRM and Web).
    After some research, I understand that I might have to use STATIC internal table to store the data during the
    initial SELECT. This way, upon each round trip, I can READ the data from the same internal table.
    My question: But now, when I tried to create a STATIC internal table in DO_PREPARE_OUTPUT, it is not allowing me to declare this table because DO_PREPARE_OUTPUT method is a INSTANCE method.
    I didn't find any STATIC methods in the IMPL class of the view.
    I would really appreciate if somebody can help me on how to proceed further.
    Thanks
    Raj

    Hi Bharathy / Adil / Masood
    Thank you very much for the replies. I declared a static method inside the IMPL class and I was calling this method inside the DO_PREPARE_OUTPUT method. Looks like it is working fine for me...will comeback if I had any further issues.
    Masood
    As per my requirement, I need to Select the data into the internal table during the very first step, then I need to continuosly read the data from this internal table upon every round trip. So I am not sure if I would be able to use the method DO_INIT_CONTEXT. Because I need a method which will trigger upon each round trip and will also hold the data of this internal table. So right now, the only option for me is DO_PREPARE_OUTPUT method.
    Plz let me know if am doing in the right way.
    Thanks
    Raj

  • People Picker field and Web service -- multiple round trips to get Display Name value

    Using Sharepoint 2010 and Infopath 2010, I have created a form that validates fields entered within the form by connecting to a .Net web service created  by someone else.  One of the fields that I need to validate is a People Picker field
    for the Project Manager. 
    The connection to the Web Service runs correctly except that the People Picker goes through the validation process 3-4 times.   I know this because I have a MessageBox showing the value for the InnerXML that pops up 3 times.  The
    first time the MessageBox shows no value for the XML, the next time it shows a name, and the 3rd time it shows no value.
    Here is the code I'm using in the Infopath form (without the Messagebox):
    Dim wsConnection As WebServiceConnection = DirectCast(Me.DataConnections("Validate"), WebServiceConnection)
    Dim formNavigatorProjectManager As XPathNavigator = MainDataSource.CreateNavigator()
    Dim wsNavigatorProjectManager As XPathNavigator = Me.DataSources("Validate").CreateNavigator()
    strformNavProjectManager = formNavigatorProjectManager.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns3:ProjectManager/ns3:UserInfo/ns3:DisplayName", NamespaceManager).InnerXml
    wsNavigatorProjectManager.SelectSingleNode("/dfs:myFields/dfs:queryFields/ns7:Validate/ns7:projectManager", NamespaceManager).SetValue(strformNavProjectManager)
    wsConnection.Execute()
    The line in BOLD above used to have just /pr:properties/p:properties/documentManagement/ns3:ProjectManager
    but I thought my problem might be because People Picker fields are made up of 3 elements -- DisplayName, AccountID and Account Type. So I changed the XML.  Sadly, that didn't make any difference.
    I am using the CHANGED event which a colleague of mine thought would have taken care of the multiple round trips.  But it didn't.
    Hopefully someone out there can tell me what I need to do so that this People Picker field only get validated once (The form also has Managed Metadata fields that have very similar problems so I'm hoping that the solution for the People Picker field
    takes care of the MMD fields too.)  Thanks in advance.  Carol.

    Hi Carol,
    It is the behavior for setting People/Group field if you just select the node "/dfs:myFields/dfs:queryFields/ns7:Validate/ns7:projectManager".
    Also you can try to only set the AccountID value of the People/Group field:
    Dim wsConnection As WebServiceConnection = DirectCast(Me.DataConnections("Validate"), WebServiceConnection)
    Dim formNavigatorProjectManager As XPathNavigator = MainDataSource.CreateNavigator()
    Dim wsNavigatorProjectManager As XPathNavigator = Me.DataSources("Validate").CreateNavigator()
    strformNavProjectManagerID = formNavigatorProjectManager.SelectSingleNode("/pr:properties/p:properties/documentManagement/ns3:ProjectManager/ns3:UserInfo/ns3:AccountID", NamespaceManager).InnerXml
    wsNavigatorProjectManager.SelectSingleNode("/dfs:myFields/dfs:queryFields/ns7:Validate/ns7:projectManager/ns7:userinfo/ns7:AccountID", NamespaceManager).SetValue(strformNavProjectManagerID)
    wsConnection.Execute()
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers
    if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
    Eric Tao
    TechNet Community Support

  • UML Modeling: Round Trip Engineering

    Hi!
    Yesterday I worked through and tested the UML Modeling: Developing Applications tutorial. Everything worked awsome and I managed to complete step in the tutorial.
    Today, when I started the studio and wanted to play a little more with Round Trip Engineering I found something strange.
    If I add an operation to the java-source using the source editor it do not show up in the UML class diagram but if I add an operation to the UML class diagram it shows up in the java-source.
    Is it me that is doing anything wrong?
    Is this a known issue/bug?
    Win XP Professional
    Java Studio Enterprise 8 with latest update today.
    Sincerely,
    // Paul

    Paul,
    Glad to hear you like the UML tool. Not sure which release/version you are working with so I'll try to cover all the bases hear.
    The UML module was released with the Enterprise Pack (early access version I believe), the live roundtrip was still enabled. Then we pulled UML module out of the Enterprise Pack because we needed to do some overhauling of the roundtrip feature and we didn't want to prevent Enterprise Pack from going beta, so now UML is available via the beta update center. This version of UML has the live roundtrip disabled so that code is not generated with every model manipulation and the model is not updated with every source edit. It sounds like this is the version you are working with.
    There is a strange scenario where the live roundtrip is unintentionally enabled (live roundtrip should never be enabled... ever - this is not your fault). A bug was filed and I fixed it, but the fix was integrated into a different branch than the one available via the update center. This is because we are about to release Java Studio Enterprise 8.1 and so we did all the bug fixing on that branch and all those fixes will be merged with the UML that is on the update center, probably in the next week or two, but a date has not been decided, yet.
    In summary, rest assured that the issue (and many many others) have been addressed, and those fixes will be merged into the version available on the update center very soon.
    Please keep the feedback coming on reverse engineering and code generation as we are rebuilding these features from scratch for NetBeans 6.
    thanks
    craig

  • Round trip between Flash Builder and Catalyst?

    Is it, or will it, be possible to go back to Flash Catalyst once a project as been brought into Flash Builder?
    I have imported the .fxp project into Flash Builder, made some code changes, then exported a .fxp project out again.  I want to be able to edit this in Catalyst so I can make design changes, but when I try to open the project Catalyst says it cannot be opened becuase it has been edited outside of the application.  Is there something I am missing or has this simply not been implemented yet?
    It would be a shame to not be able to "round trip" from Catalyst to Builder.
    Thanks for your time and the product looks very exciting.

    Hi Watern,
    For the first version of Catalyst, we're focusing on the one-way workflow from Catalyst to Builder (start in Catalyst, finish in Builder). We realize this is a big limitation and hope to address soon after the first release.
    There are a number of partial solutions for this problem, which you can find by searching around the forum. Most of them involve dividing the work between Catalyst and Flash Builder as cleanly as possible, which is surprisingly easy to do given the new skinning architecture. Here's an excerpt from a post I wrote that seems to have been lost:
    "If you are iterating between Catalyst and Builder on a custom component, you may find it is worth splitting the custom component out in that fashion. I'm planning to write an article explaining this, but here's a preview:
      In Builder, create a new subclass of SkinnableComponent. Put the component logic in there.
      If you need to add visual logic like "now move the konfabulator 10px to the left", you should make konfabulator a skin part, using the metadata (see Scrollbar.as, in the Flex 4 SDK, for an example).
      If your component has states, declare them with the metadata.
      In Catalyst, make sure that your custom component has those parts and states.
      Then import the custom component into Builder.
      In the MXML file for the custom component, change the root tag <Group> to <Skin>. It's now a skin (not a custom component).
      In the MXML file for the skin, add the [HostComponent("com.me.MyComponent")] metadata (see HScrollbarSkin.mxml, in the Flex 4 SDK, for an example).
      Wherever you are creating the instance, change the code <MyComponent/> to <MySkinnableComponent skinClass="MyComponent"/>. Now you're creating an instance of your skinnable component and assigning it the skin created in Catalyst.
    Done! If you make more changes in Catalyst, you'll have to repeat steps 5-7 again (for now!)."
    -Adam

  • Problem with demo : Round-Tripping XML with Oracle9i

    Hi,
    We have recently installed a 9.2.0.1.0 database with the intention of trying some of the new XMLTYPE samples.
    I downloaded the demo : Round-Tripping XML with Oracle9i.
    The first part, Mapping XML into Oracle9i, worked fine.
    The second part, Re-composing XML from Oracle9i, doesn't seem to run.
    Here is what I get i SQLPLUS :
    (Step 1 to 15 is OK)
    SQL> create or replace type PURCHASEORDER_TYPE as object
    2 (
    3 "Reference" VARCHAR2(64),
    4 "Actions" SYS.XMLTYPE,
    5 "Requester" VARCHAR2(48),
    6 "User" VARCHAR2(32),
    7 "Reject" PURCHASEORDERREJECTION_TYPE,
    8 "CostCenter" VARCHAR2(3),
    9 "Vendor" VARCHAR2(32),
    10 "PONumber" NUMBER(10),
    11 "ShippingInstructions" PURCHASEORDERSHIPINST_TYPE,
    12 "SpecialInstructions" VARCHAR2(2048),
    13 "LineItems" SYS.XMLTYPE
    14 );
    15 /
    Type created.
    SQL> --script 16
    SQL> create or replace view PURCHASEORDERDOCUMENTS as
    2 select P.REFERENCE,
    3 sys_xmlgen(
    4 PURCHASEORDER_TYPE(
    5 P.REFERENCE,
    6 (
    7 select
    8 sys_xmlagg(
    9 sys_xmlgen(
    10 PURCHASEORDERACTION_TYPE(
    11 A.ACTIONEDBY,
    12 A.DATEACTIONED
    13 ),
    14 sys.xmlgenformattype.createFormat('Action')
    15 )
    16 ).extract('//Action')
    17 from PURCHASEORDERACTIONS A
    18 where A.REFERENCE = P.REFERENCE
    19 ),
    20 P.REQUESTER,
    21 P.USERID,
    22 PURCHASEORDERREJECTION_TYPE(
    23 R.REJECTEDBY,
    24 R.DATEREJECTED,
    25 R.COMMENTS
    26 ),
    27 P.COSTCENTER,
    28 P.VENDOR,
    29 P.PONUMBER,
    30 PURCHASEORDERSHIPINST_TYPE(
    31 S.SHIPTONAME,
    32 S.ADDRESS,
    33 S.PHONE
    34 ),
    35 P.SPECIALINSTRUCTIONS,
    36 (
    37 select
    38 sys_xmlagg(
    39 sys_xmlgen(
    40 PURCHASEORDERLINEITEM_TYPE(
    41 L.LINENO,
    42 L.DESCRIPTION,
    43 PURCHASEORDERPART_TYPE(
    44 L.PARTNO,
    45 L.QUANTITY,
    46 L.UNITPRICE
    47 )
    48 ),
    49 sys.xmlgenformattype.createFormat('LineItem')
    50 ),
    51 sys.xmlgenformattype.createFormat('LineItems')
    52 )
    53 from PURCHASEORDERLINEITEMS L
    54 where P.REFERENCE = L.REFERENCE
    55 )
    56 ),
    57 sys.xmlgenformattype.createFormat('PurchaseOrder')
    58 ) "PODOCUMENT"
    59 from PURCHASEORDERSTORE P,
    60 PURCHASEORDERREJECTION R,
    61 PURCHASEORDERSHIPINSTRUCTIONS S
    62 where R.REFERENCE = P.REFERENCE
    63 and S.REFERENCE = P.REFERENCE;
    View created.
    SQL> --script 17
    SQL> set heading off;
    SQL> set wrap on
    SQL> set pagesize 10000;
    SQL> set long 10000;
    SQL> select P.PODOCUMENT.getClobVal() from PURCHASEORDERDOCUMENTS P;
    select P.PODOCUMENT.getClobVal() from PURCHASEORDERDOCUMENTS P
    ERROR at line 1:
    ORA-06502: PL/SQL: numeric or value error
    ORA-06512: at line 1
    Has anyone had the same problem ?? I would appreciate any suggestions.
    Thanks,
    Frank

    I found the solution :
    The database was running with a multibyte characterset (UTF8).
    After changing that to WE8ISO8859P1 everything worked fine.
    It is strange that Oracle suggest to use UTF8 when installing the new database (9i)
    and on the other hand doesn't support multibyte charactersets for several of the XML-products.
    Cheers,
    Frank

  • Network Round Trips when loading a Form - reducing Network Latency

    I am working on a Forms migration from Client-Server to WebForms running on Application Server 10.1.2.0.2
    Does anyone know the minimum number of network round trips that can be achieved when loading a Form?
    For most of the Forms in the migration I am seeing 3 network round-trips before the Form is displayed and on Forms that use Webutil I am seeing 7 round-trips before the Form is displayed. Is this normal or are there ways of optimizing the round-trips down?
    The Forms code has already been optimized by removing SYNCHRONIZE commands and TIMER commands and I have already refered to metalink note 363285.1 which gives lots of good advice however there is no specific information on the minimum number of round trips that you can expect for loading a Form.
    Thanks for any help you can give.
    Philippe

    Ok, a bit of an update is needed.
    There were a number of posts below that have been lost due to an accidental deletion but I shall try and summarize them here:
    Tony Garabedian - Posted a number of code optimizations that he'd used for speeding up code when querying within a Form. Tony if you are able to re-post those that would be great :-)
    Grant Ronald - posted some more information in which he mentioned that the extra pings are used to synchronize between the App.Server and the client. He also commented that a network that uses satellite was inherently slower and would therefore require a different front end to handle the increase in latency.
    For my part I said nothing new other than ask loads more questions. I did mistakenly comment that we are using satellite for our network however upon yet more discussion with our network guy it turns out that we're using optical cable for everything. Out guaranteed round trip time is about 320 milli-seconds to Australia from the UK.
    Currently I am left with the understanding that we are not likely to go below 3 round trips for most of our Forms and in the case of Webutil we are likely to be limited to 7 round trips.
    Of course if anyone out there has any specific experience with this issue and can comment further please feel free.
    Many thanks,
    Philippe

  • TIFF round trip between A3 and PS CS5

    Hello, I have one question that's been bugging me for the last few days.
    I set Aperture 3 to use 16 bit TIFF files for round tripping between A3 and Photoshop CS5. When PS opens it actually calls Camera Raw. I then open the file do the adjustments in PS and save the final image. However, when I go back to Aperture, Aperture does not update the preview of the final image. If I set Aperture to use PSD files the round trip works great, but with the PSD file I cannot invoke Camera Raw from within CS5 when using smart objects.
    Has anyone experienced this before? am I doing something wrong?
    Thanks!!!
    Mariano

    Photoshop in the normal course would not call Camera Raw for dealing with the TIFFs sent for external editing -- have you set something in Photoshop CS5 to cause all TIFFs to be opened that way?
    Since Aperture adjustments will do everything the camera raw display can to in Photoshop, it seems little benefit would come from then using the camera raw display in Photoshop for anything coming from Aperture for editing?
    I use TIFF as the format to send to PS CS5 for editing and all is working fine, btw.
    Ernie

  • Round trip from photoshop or portraiture causes problems(TIFF)

    And always has to be honest.  2 different computers, with this new LR build and and several before it.  Mac OS latest everything and previous builds..  Macbook Pro and imac..
    Edit in photoshop CS5 (and previous versions) as a TIFF, apply clone corrections and liquify fashion portraits.  Save and close and re-open for some final tweaks in Lightroom.  I still get erratic sliders, slow updates when moving sliders and jumping bars to previous values on TIFFs only.  Even worse when i edit in Portraiture App and skin smooth, save tiff and return to lightroom.  It takes a about 3 minutes to even show itself before editing, keeps flashing up then dissapearing again.
    If i remove Tiffs that have been through photoshop or portraiture and synchronise the folder to import them back into Lightoom my problems disapear..  but its tiring.  I now find myself using C1 more and more because the transitions between apps are smooth and problem free.  However i prefer the flexibilty, speed and control of LRs functions
    Others must be experiance this, it can't be fate this is happening on two different computers, old computers that have been replaced and previous versions of Mac OS and Lightroom.

    Ernie, the photos are captured by Canon XTi so they are in CR2, saved to my internal HD and then "loaded" to Aperture as referenced files.
    As for PS CS3, I am not sure whether I have it set up as a scratch disk or not (if you could let me know where to check it).
    Yesterday, I did yet another round trip and found out that when I finish in PS and SAVE and CLOSE, then the file shows up properly in Aperture. What I was doing before was I SAVEd if but did not close. Then I would SAVE AS in PS to make sure I have some kind of a version of the file if the one in Aperture fails to work.
    So it seems I cracked it but I would still like to hear what you have to say, or anyone for that matter. It seems to me that the SAVE-CLOSE is crucial.

  • Trouble with the round trip from Soundtrack Pro 2 to Final Cut Pro

    I have edited a home movie together. I then have sent the sequence to Color for grading and then after completing the Color changes and Rendering. I sent it back to Final Cut Pro. It starts out working fine but during the transfer process it stops at somewhere between 50% and 60%. It is during the "Importing XML Data" phase. It just sits there and does not change and I have to force quit to get out of it. The exact same thing happens when I try to round trip from Soundtrack Pro 2 back to Final Cut Pro. So I am unable to make use of the changes I make in these programs.
    This is a round trip process that I have successfully made many times before. Nothing has changed. I am working in Final Cut Studio 2 with the latest updates on an Intel Mac. Any advice on how to remedy this situation would be greatly appreciated.
    Thank you in advance.

    Make sure your easy setup has the correct frame rate for your sequence.  Seems crazy but somehow or other fcp assigns a frame rate to audio files.   I've found this can sometimes be tricky to get right.  Here's what I've done to force the issue.  Make sure the easy setup frame rate reflects that of the target sequence in fcp.  Create a new project.  import the audio in the new project.  And then copy the clip from the new project to your main project. 
    Good luck

Maybe you are looking for