Rounding Profile Issue in Article Master - IS Retail System

Hi,
We have an Issue with the Rounding Profile in Article Master of IS Retail System.
Rounding Profile (50) Maintained at Purchasing View of Article Master (MM41 & MM42) and the same is getting copied to Logistic DC View and Logistic Stores of Article Master
Scenario: -
DC Rounding Profile is being incorrectly applied to Store to Distibution Ceter STO
Return STO between Stores (xx01 u2013 xx10) and Distribution Center (Site u2013 XXAA and XXBB)
Store is returning the Stock to the Distribution Center. While creation of Return STO, System is taking the Rounding Profile QTY maintained at Purchasing View of Article Master Record.
Configuration Done:
The Rounding Profile Field hide at the Logistic: DC View and Logistic: Store View of Article Master (OMSR  MARC-RDPRF).Hence the Rounding Profile Field at Both Logicstics View got disappeared in Article Master Screens. But still the entries are visible at MARC Table.
Issue:-
The system is picking the Wrong Qty (50) instead of 1 Qty while creation of Return STO between Stores and Distribution Center.The System is prompting the Qty 50 (Which is maintained in Purchasing View of Article Master but No Rounding Profile is maintained at Logistic: DC View and Logistic: Stores View of the same Article).
REQUIREMENT:
While creation of Return STO between the Stores and Distribution Center the Rounding Profile should be inactive.
The system should pick up the Right Qty entered instead of Rounding Profile Qty.
Your valuable suggestions or advises are highly appreciated...
Regards,
Sateesh.Kandula
Edited by: VijayaSateeshKumar Kandula on Nov 8, 2010 11:52 PM

Hi,
We have resolved this Issue using the Configuration Change in OMSR and programatically.
Thanks
Sateesh.Kandula

Similar Messages

How to Create Merchandise Category Reference Article in IS-Retail system

Hi Experts,
Is there any separate Tcode to create Merchandise Category Reference articles in IS-RETAIL system.
Whether Merchandise Category reference article is created as normal article in MM41 only?
Whether we can assign any of the article that is created in that merchandise category as reference article in WG21 (or) is there any separate Tcode to create Reference articles.
During Retail Implementation projects, how Merchandise Category reference article are handled???
Any Input is highly appreciated.
Thanks and Regards,
Selvakumar.M

Hi,
With Tcode WG21 u can create MC ref. article. It is a way to create MC ref article. No need to use MM41.
Regards,
Rahul

IDOC type for Article Master : IS Retail

Hi all,
I am new to ALE/ IDOC and working in a scenario to create article master in SAP from third party application. The client is using IS Retail system with ECC 6.0. Can you please suggest what IDOC type to be used. The IDOC will be sent to SAP system from the third-party application. The IDOC can then be processed to create article master. Is ARTMAS the right message type for it? Somebody also suggested using message type WP_PLU. Can someone please let me know what is the difference between them?
Thanks,
Sonika

Hello Sonika,
WE_PLU is generally used along with the POS interface.
Please check this for more details
http://help.sap.com/saphelp_470/helpdata/en/ed/df673c86d19b35e10000000a11402f/frameset.htm
Article Master Uploading in IS- Retail system
This is basically your call depending on what data the message type is intended to carry and the use. ARTMAS should be the choice in your case.
Regards,
Nimish

User exit; Article master SAP Retail for MVKE table?

Is there a user exit in SAP Retail for the MVKE table?
The articles is maintained in a third-party system and are transferred to SAP via Idoc. For sales sets, article category = 10, these requires a item category = ERLA in SAP (MVKE-MTPOS) so that the sales set "explodes" in the sales order.
The third-party system doesn't maintain sales org-spesific data for the articles, therefor we use one ref.article for all article groups. And because sales sets exits in many article groups, we found it difficult to have ref.articles for all of these article groups.
Also the article type is also "normal",so the only way to differentiate the sales sets, are via article category. But since SAP has no link between article category and item category in customizing (as far as I know), I wonder if there is a user-exit to set the item category based on the article category?

Hello Sonika,
WE_PLU is generally used along with the POS interface.
Please check this for more details
http://help.sap.com/saphelp_470/helpdata/en/ed/df673c86d19b35e10000000a11402f/frameset.htm
Article Master Uploading in IS- Retail system
This is basically your call depending on what data the message type is intended to carry and the use. ARTMAS should be the choice in your case.
Regards,
Nimish

Rounding profile in the material master doesn't copy to the inforecord

RT,
Dear all, have you ever encountered this kind of problem?
Wishing get the answer as soon as possible from you!

HI,
Did you customize teh rounding profile appropriately in SPRO?? you need to maintain them. moreover this should happen even before a PO is created, i.e while a requirement generates. the rounding takes place during planning run in MRP

Rounding Profile in Delivery

Hi ,
could someone let me know is it possible to do or activate rounding profile in delivery(vlo1n) for sales.
thanks in advance
leo

hi,
let me explain my requirement more clearly .
1.minimum quanity is 50 ea, delivery unit is 1 carton(i.e 50 in a box). in material master sales org 1 view.
2. stock (mmbe is 65 ea).
rounding profile has been activated.
example:
if i create an order for 80 , bcoz of the rounding profile its rounding up tp 100.
but my confirmed quanity is 65 only bcoz of availble stock.
if i try to deliver in vl01n my picking quantity is coming as 65 bcoz of the available stock.(fine)
Here is my requirement,
let the order be the same ie order quantiy 80(i.e 100), confirmed quantity be 65,
but in delivery i want the rounding profile to get activated so that the system rounds down(in my example)off the delivery to 50 ea or 1 carton (since the confirmed quantity is 65 only-- i.e it is rounding down to 50 since the stock is only 65 instead of 100).
is this possible????
if so how??
Help would be very much appreciated.
thanks in advance.
leo

Rounding Profile in IS-Retail

Hallo Retail Expert,
The Scenario is as follow,
I have some Articles that I order by vendors only in defined Quantity,
for ex. 3, 6, 9, 12 or 5, 10, 15 or 12, 24, 36 Pieces. For this purpose
I am using Rounding Profile and I have defined regarding my requirement.
It Works really good when I work with Variants. When I create Purchase
Orders per IDOCs it works fine because there I use only Variants. But
when I try to create Purchase order manual in TA: ME21N with Generic
Article, there this Rounding Profile (Quantity Addition/Subtraction
profiles) doesnu2019t work. There comes a Pop-up with all the Variants,
where I gave my required quantity. At that point this examination
doesnu2019t work. It work only when I work with variants.
I am assigning rounding profile in Article Master at Purchasing View
Level (Article/Vendor/Purch.Org).
I cannot use Standard (Unit of measure is the order unit) because Piece on Inbound Delivery.
Could you please suggest me why at Generic Article level it doesnu2019t
work?
Is there any other possibility in Retail?
Any suggestion is Welcome.
Thank you in advance.
Regards,
Nilesh

Hi all,
as far as I know, the rounding functionality is not performed on the generic article. The rounding profile is considered only when the variants are entered directly in the PO. This is standard behaviour.
I cannot give the reason for this logic implemented. Maybe it would be a possibility to make an enhancement in the PO?
Regards
Tobias

How is the forecast profile tied to the article master?

Hello-
I understand how to create a forecast profile, but I assume there is some way to assign that profile to articles or material groups, and I cannot figure that out. If it is assigned, it will show on the article master in the right field, but it cannot be changed or maintained in the article master directly. So, there must be another method to link/assign these outside of the article master.
Any help is appreciated.
Thanks-
Brady

Hello-
Thank you for the answer, I found it - I have a Retail system, so it is structured a bit differently, but the tab is ultimately there.
Thanks again-
Brady
Edited by: Brady Stone on Feb 27, 2009 9:49 PM

SAP Retail : Article Master Data Transfer using LSMW/ARTMAS05: EAN Error

Hi Bjorn Panter,
I want to thank you for providing very informative articles on the Master Data of ERP Retail.
We are currently loading articles to SAP from legacy and use your articles on ERP Retail as part of our knowledge warehouse.
We have encountered an error which has stumped our conversion.
We are getting an M3 535 error stating that "First specify the main EAN for the unit EA". We are using LSMW (IDOC Method, Basic Type ARTMAS05).
Our MARM segments have generic and variants. The UPC and UPC category (set to UC) are filled for the variants and blank in the segment containing the generic.
Our MEAN segments contain variants only with the UPC and UPC category (set to UC) filled.
Our UC EAN category is configured with a blank check digit algorithm and a number range of 12 digits. We are loading our variants with EANs that are 12 digits.
When debugged IDOC_INPUT_ARTMAS, I noticed that :
In routine MARM_UEBERGEBEN (in function module BAPI_MATERIAL_MAINTAINDATA_RT), this code clears our MARMX indicators :
   LOOP AT UNITSOFMEASURE.
    ART_DATA_EXISTS = 'X'.    "JH/05.01.00/4.6C Entkopplung der MALG
    IF UNITSOFMEASURE-FUNCTION NE C_MSGFN_D.   ->>>> this checks if our function code is 003 (which is a delete).
*     TMFIELDRES aufbauen
      CLEAR UNITSOFMEASUREX.                   ->>>> Since we are doing a create, it clears the indicators in unitsofmeasureX
To bypass this clear, I debugged the program and overlayed the indicators and marked UPC and UPC category as 'X'. This worked and we were able to post our IDOC successfully... THe UPCs showed in the MARM and MEAN tables.
However, knowing that there are a lot of Retail companies loading articles into their SAP system, it would seem odd that no one has reported this as a bug or no one has posted this issue in SDN. I could not find any OSS note related to this issue either.
Can you please help us figure out what is wrong ? Have you encountered this error in the past ? Is there something in config that we should check ? Should we look at fields in our segments ?
Any help from you would be greatly appreciated.
Thanks,
Sarah

Dear Sarah,
please open an OSS customer message.
Put in a valid IDOC ARTMAS number with this error and open your system.
I guess either it is a bug in IODC structure or you found a bug in software.
My colleages will take care.
Regards
Björn

SAP IS Retail ECC 6.0 - Article Master sending to XI

Hi,
I'm doing IDoc to File Scenario, to send articles from ECC to XI. Using the
Message Type WP_PLU
IDoc Type WP_PLU01
I have created a single article or generic article from t.code MM41. But what is the t.code to send the article to XI. If idoc what i'm using is wrong, then which is the right one.
Pl. do the needful.
Rgds,
Balaji

hi,
SLD-
1) Create a Product/Software Component
2) Technical System pointing to R/3 system
3) Business System for the above technical system
In the Repository
1) Import the Software component created in the sld
2) Create a namespace,
3) import the idoc and then create sender data type/message type etc and mapping
4) Mapping Rules is depends on the requirement
In the Directory
1) Create a Scenario /import the business system
2) Create Receiver/Interface determination
3) Create communication channels for sender and receiver
4) Sender Agreeement and Receiver Agreement.
XI:
1. SM 59 - Create RFC destination pointing to R3.
2. IDX1 - Create a port for R3
3. IDX2 - Import IDOC metadata.
if you have any other doubts regarding IDOC-XI-FILE scenario, please go through the information below and clear all your doubts.
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
IDoc-XI-File scenario
File -> IDOC ref:
File to IDOC
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Thanks,
Vijaya

Article Master Uploading in IS- Retail system

Hi Experts,
Please tell me what are the steps in Uploading Article Master in IS Retail system during GO Live???
How to convert Articles in Legacy system to SAP system (Whether we need to change number range (Internal or External) of Article Type during Upload time???)
We need to extend each variant of generic article for purchasing, sales, logistics DC and Store View since each variant article is brought at different price in Different DCu2019s. (Once we create Generic article, then only we will come to know the variant codes u2013 How to handle this scenario during GO-Live)
Can any one tell me, how these activities are generally handled in IS-RETAIL Project???
Any Input is highly appreciated.
Thanks and Regards,
Selvakumar.M

Uploading articles should be done in all cases always with IDOC type ARTMAS
Converting can be done with migration workbench LSMW
Number ranges can be internally or externaly. It doesnt matter in migration.
If you plan to use internal numbers for article numbers, then define a numberrange
set the counter higher than your current number of articles.
Migrate the articles in the created number gap range.
Please do not mix up master data and prices.
With ARTMAS you can migrate the views and pure master data. I recommend to use the WRKKEY fields at the end of the IDOC to speed up processing.
Always don't forget to define REFRENCE DC and REFERENCE STORE setting in customizing. Article master will work only if these settings are correct.
To simplify process, create manually some reference articles. That helps a lot.
For all other things or hints, we need more details.
It can be very easy up to very sophisticated. The artcicle master is a nice piece of software, very flexible, but also very bad, if you use it by a wrong way.....
Cheers
B

Article Master Uploading in IS- Retail system steps

Hi Experts,
Please tell me what are the steps in Uploading Article Master in IS Retail system during GO Live???
How to convert Articles in Legacy system to SAP system (Whether we need to change number range (Internal or External) of Article Type during Upload time???)
We need to extend each variant of generic article for purchasing, sales, logistics DC and Store View since each variant article is brought at different price in Different DCu2019s. (Once we create Generic article, then only we will come to know the variant codes u2013 How to handle this scenario during GO-Live)
Can any one tell me, how these activities are generally handled in IS-RETAIL Project???
Any Input is highly appreciated.
Thanks and Regards,
Selvakumar.M

IDOC PROCESS IN LSMW

SAP MDG and article master in SAP IS-Retail

We need a solution, where external vendors can contribute with article information, the master data persons can enrich the vendor information, and where the articles can be created appropriately afterwards in SAP ERP.
SAP Master Data Governance (MDG) seems to be the right solution for standard SAP. And SAP MDG has also been described in enhancement packages for SAP Retail since at least ECC 6.05, Nevertless previous discussions such has MDG-Material and IS-Retail indicate that SAP MDG is not appropriate for SAP Retail.
Please contribute with your considerations and experiences: Is MDG appropriate for article master data maintenance in SAP Retail?

Hi Sune
The thread you are refering to is quite old, there is a solution available now for doing retail master data governance on SAP MDG. This is offered as a consulting solution now.
The data model itself is modelled after the IS Retail data model for Article master and would leverage on the data governance capabilites offered by the MDG framework.
It is not exactly a supplier portal for data exchange but there have been architecture discussions on using a 'lean' version of the data model as a vendor facing portal and seperating this from internal facing MDG for enriching the ERP specific parts of the article master data , before governing and commiting to the ERP system.
If you are interested in talking more about it would be happy to do so.
Regards
Dilip

IS Retail - Article Sales Price Updation in Article Master

Hai guys,
I created a new article (mm41) and I enetered Purchasing price in the 'Purchasing' tab. But when I give a mark up percentage in the 'Sales' tab, the price is not updating / changing as per the percentage. However I saw this feature working fine in some others' system.
Can anyone help me in fixing up this problem? Thanks in advance
Regards,
Maheshwaran. I

Hi
Check following setting
SPRO>Logistics general>Retail pricing>Sales Price Calculation>Assign Pricing Type/Reference Site to Organizational Level
U should have pricing type say 0001 & reference site assigned to sales org, distribution channel combination
Article master will calculate sales prices based on this & mark up u have maintained for mechandise category in wva1
Regards,
NNK
PS:Award points for usful ans

Article Master Data Extraction from IS-Retail System

Hi,
I have one IS-Retail System with me. I want to extract Article Master data from IS-Retail System.
Is there any specific procedure to do this? If yes, can anybody tell me the procedure?
Waiting for your response...
Cheers,
Yash K

Hi Yash,
you can use transaction BD10 to extract articles. Note that you should change to message type "ARTMAS" instead of "MATMAS".
Best regards
Michael

Rounding Profile Issue in Article Master - IS Retail System

Similar Messages

Maybe you are looking for