Rounding value for PR Quantity

Dear Expert,
Can we have rounding value for order quantity in Purchase Requisition? So we do not need to calculate the PO quantity based on the rounding value we have determined in material master / get the error message "Order quantity violates rounding rules while we creating the Purchase order.
And What is rounding profile? can we use this to set the rounding value for PR quantity?
Hope to see ur feedback soon.
Thanks
Pauline

Hi Dick Hua,
Thanks for your feedback.
i understand what you are trying to explain to me , can we do some changes / customizing from your statement, so that the manually created PR can have effect on rounding value, same as when we run the MRP.
Can you tell me What is rounding profile used for? can I used rounding profile to solve my customizing?
Thanks
Pauline

Similar Messages

Rounding value for purchase order quantity

Hi Guru ,
i need help for logic LOT SIZE MRP.
In particolar i need of use the parameters of rounding for create the planned order multiple of the value.
Example for a requirement of 3800 pz whit a value rounding of 500 i vould want that the system create a planned order of the 4000pz.
I have tried insert this value 500 in the field "Rounding value for purchase order quantity" in the view MRP1 but after run MRP the system create a planned order of the same quantity of the requirement.
Thanks a lot for help
Daniele
PP TEAM

Dear,
OMI4, for lot size select Lot for lot order qty with rounding.
Either you can use the Rounding Value or you can use a Rounding profile in MRP2 view to round of your order qty and rouding value in MRP1 view.
Further you can check
Check FM MD_ROUNDING_VALUE
Regards,
R.Brahmankar

Rounding value for abetment

Dear Expert
We want to map the rounding value for abetment per unit of material , presently we have created a condition type zmrp which represent market price value and abetment is calculated on the basis of ZMRP which 65%of ZMRP . e.g
for a x material 17.50 ZMRP
Abetment condition type value is 65% of ZMRP =11.375 we want here system should round up the value 11.38 and calculate the value accordingly but what system is doing presently is that it round up the condition value as whole not for indivual unit . WE want round up before multiplying the qunaity of productsnot after.i.e unit value system should round up
Regards

Hi,
Create a new Alternate calculation base value routine using VOFM. This routine should calculate the base value for the condition type as round to commercial value for the unit price. Assign this routine to your condition type in V/08 customization in alt. calculation base value field. This way SAP will first calculate unit rounded price and then will multiply that price to the order quantity to calculate final price as you desired. Let me know if you need a more help on the same.
Thanks
Kapil Sharma

Rounding value for direct procurement

Hi,
I an sourcing the same material from another plant within the same client. The materiale is some times purchased as a standard material using rounding value and going to stock. But, in some cases the material is procured as direct procurement. When purchasing for direct procurement will it then be possible not to use the rounding value but just order the exact quantity?
thanks,
Anders

Hi Andres,
I think, you do not need to take any action on this requirement. SAP works the way you wanted, by standard. For example, you have a setup with a vendor (may be via info record or material master itself may have rounding qty etc)...not a problem. The parameters you use in material master will control for procurement process either triggered from planning (or production ) or manual purchases. When you create a SO# and if it triggers a purchase requisition, it sends exact quantity required only, into the preqs. By standard SAP config, the message about rounding rules is just warning. I don't think you will be stuck with this message when you try to convert the 3rd party Preq to PO. Even if there is a message, it must just warning.
Let me know with these inputs, if you test both types of PO#s, how it goes.
Regards

Negative Values for Stock Quantity in BI

Dear Experts,
I have a report based on Inventory Management Multiprovider which is executed to check the Valuated Stock Quantity for single day input entry. ( Valuated Stock Qty is a non cumulative Key figure with Inflow as Quantity Received into Valuated Stock and outflow as Quantity Issued from Valuated Stock )
So Valuated Stock Qty for a particular day = (Quantity Received into Valuated Stock till that day) - (Quantity Issued from Valuated Stock till that day). So i think, checking the cube data in BI will not help to resolve the issue.
Issue: : When I execute the report in BI for some dates I am getting Negative Values for Valuated Stock Quantity which is wrong output.
Can this issue be resolved by filling set up tables and loading it to BI, say for last month?
Could you please suggest any other solutions available?
Also it will be helpful if you could explain what needs to be analyzed in ECC side (with T Codes)
Thanks in advance
Vinod

Hi Vinod,
try these transactions on the ECC side:
MMBE to view stock of a material
MB51 to view all material documents for your selection (i.e. material)
The business content stock reporting in BW is mainly using datasource 2LIS_03_BF for movements and 2LIS_03_UM for revaluations. For this to work you will have to have all material documents loaded into your cube.
Also have a look at this How To paper if you haven't yet.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Best,
Ralf

Multiple GR values for same quantity

Hello all SAP MM Gurus,
I have a strange problem. I have a MM scheduling agreement 5500013812 and in this agreement there is one line item for material 651660. The GR has been done for this line item a number of times since 2009. But when I went to purchase order history of this line item, I found that for a quantity of 500 PCs, the system has posted different amounts.
For example, when the GR was done on 02/21/2011 for qty 500, the amount was 706.68 EUR. When the GR was done on 01/31/2011 for qty 500, the amount was 776.94 and when the GR was done on 12/13/2010 for qty 500, the amount posted was 765.57 EUR. This is really puzzling me since there are no price changes in Material master record or in MM scheduling agreement. There are no alloy surcharge price changes also. But still, why the system is posting different amounts for same quantity of this material, I don't understand.
Can someone please tell me whether I am missing something somewhere? Your suggestion would be very much helpful for me in resolving this issue.
Thanks and Regards,
Umakanth

this? :-(
SQL> WITH t AS
2    (SELECT 'SCOTT' NAME ,'jefferson rd' address FROM dual
3     UNION ALL
4    SELECT 'KODY', 'milburn'    FROM dual
5     UNION ALL
6    SELECT 'ZACH', 'westlake rd'     FROM dual
7     UNION ALL
8    SELECT 'KAREN', 'camarillo'    FROM dual
9     UNION ALL
10    SELECT 'MILLER', 'jefferson rd'     FROM dual
11     UNION ALL
12    SELECT   'THOMAS', 'milburn'   FROM dual
13     )
14 SELECT *
15 FROM t
16 WHERE address IN (SELECT address
17                    FROM t
18                   GROUP BY address
19                    HAVING COUNT(*)>1);
NAME   ADDRESS
SCOTT jefferson rd
MILLER jefferson rd
KODY   milburn
THOMAS milburn

Rounding values for display

Hi all hope you can help.
I have a numeric DB column say 566785.8975. The value of the information in the column cant be changed. The application performs two functions data input for the owners and view for the customers.
Idealy I want to only display to two decimal points for the customers
I have tried using the the ROUND command with no success using source as a PL/SQL expression or function and a value of ROUND(GROSS,2) where GROSS is the column name
any ideas?
Thanks

Hi Bjorn - the problem with the TO_CHARing (having suggested it in the first place - sorry) is if you want to use automated row processing to update the page.
However, you could have an item (your gross_read_only) which is not linked to a DB column, and then all your automated fetches and updates would work fine.
You can set the value of this item using a SELECT statement within the item source, or a computation when the page is rendered.
In either case, SELECT just the read_only item (TO_CHAR it as described), and I see no reason why it shouldn't work.
In other words - for the item source:
SELECT to_char( GROSS, '999G999G999G999G990D00') GROSS_READ_ONLY
FROM TABLE
where ID = :P1_ID_ITEM
or in a PL/SQL item computation:
declare
l_value VARCHAR2(4000);
begin
select to_char(GROSS, 'FML999G999G999G999G990D00') into l_value
FROM TABLE
where ID = :P1_ID_ITEM;
return l_value;
(or :P1_READ_ONLY_ITEM := l_value in a page computation)
end;
Does this help?
John.

BADI for Changing Deployment Rounding Value

Hello All,
During my Deployment run I need to consider the rounding value from the /sapapo/marm table and not from the product master. So I need a badi or user exit to change the rounding value for deployment run. Do let me know how I can achieve this.
Thanks,
Siva.

Dear Tiemin,
Thanks for your reply. But I need a BADI which needs to work when there is no Fair Share situation. It will be great if you provide me which suits for it.
Thanks,
Siva.

Report Region rounding numbers for no apparent reason

I have a report region. It is a function returning query. The results are consistently displaying rounded values for the dollar amounts. The format for the number mask is FML999G999G999G999G990D00 . The query is shown below. I am at a loss for why this is happening. Any help is greatly appreciated...
Adam
DECLARE
str_Query VARCHAR2(2000);
BEGIN
str_Query := 'SELECT xatr.Refund_ID, '||
'xatr.Refund_ID, '||
'xatr.Invoice_Header_ID, '||
'xatr.Line_Description, '||
'xatr.Refund_Amount, '||
'xatr.Interest_Amount, '||
'xatr.Refund_Total, '||
'xatr.Date_Paid, '||
'xatr.Check_No '||
'FROM XXMC_AP.XXMC_AP_TAX_RECONCILIATION@'||:P0_INSTANCE||' xatr, '||
'XXMC_AP.XXMC_AP_TAXREF_INTERIM@'||:P0_INSTANCE||' xati '||
'WHERE xatr.Refund_ID = xati.Refund_ID '||
'AND ( xati.Process_Step = ''Loading'' '||
'OR xati.Process_Step = ''Reconciling'')';
RETURN str_Query;
END;

I was working with two different tables. The first table contained all the data. The second table contained a subset that was populated by a stored procedure. The second table, which was where the rounding was coming from, had the number fields setup with a precision of 15. This forced the number to an integer and the apparent rounding. I removed the precision and it worked fine.

Can't find roundness setting for rounded rectangle (CS5)

I know I'm missing something obvious, but I can't seem to find the control to set the roundness value for a rounded rectangle.
Per help, there should be a roundness control in the properties window, but I've been looking for 15 min. and can't seem to find it.
tia,

Thanks Linda. I was clicking on the yellow dots but somehow avoided sliding them...
And I missed Auto Shape Properties, as opposed to the Auto Shapes window.
A Fireworks 4 user is like a rube in the big city for the 1st. time...
-williamc

Table for Material Quantity and Value for particular month and year

Hi All
My requirement is that for a particular month and year I want to know the stock quantity and stock value for a particular material for a given plant.From which SAP table can I get this data as I want to fetch data for my Y report?
Regards
Satish Kumar

Hi,
You can use MB5B table as suggested earlier.also you can use:
MBEW-VMKUM --> stock for previous month period
MBEW-VJKUM --> stock for previous year period
PLease view these links which migh tbe helpful to you:
http://help.sap.com/saphelp_47x200/helpdata/en/39/55fee3bc6111d4b3960050dadf0791/content.htm
TableStock
Thanks
Nisha

Need rounding off value for partial Goods receipt

Hi,
My requirement is that the PO value,PO tax value ,GR value and Invoice value(IR) should get rounded off.
When I am using the PO value which is rounded off in PO, but at the time of posting partial goods receipt the value for the GR/IR clearing or the stock value is not getting rounded off for these G/ls.
What should I do for this to get the rounded off values in GR.
Regards,
Goraksh

Hi Goraksh,
The problem is that the pricing (incl. the rule 17) is not normally called at the time of GR. As Jürgen wrote, the system just uses the "net value" field of the PO.
I have however a "wild" idea. If the price in the PO comes from the info record or from a contract (and not changed manually there), then you can set the "pricing date category" = 5 there, meaning "GR date". This causes the pricing to be called again at the time of GR and your formula 17 will fire.
The side effect of course is that the price that you had in the PO, printed and sent to the vendor will not be binding: if you change the PIR price before the GR, the GR will be posted to the new PIR price, despite the fact that the PO printout showed something else. So the question is if the price printed on the PO is indeed binding in your business case - in many business cases it is the current vendor price that matters for the billing by the vendor, not the one that you prined on the PO. For such business cases you should have had pricing date category 5 anyway...
BR
Raf

Rounding Value is not considered for MB lot size

Hi
I have a scenario where MB (Monthly Lot size) lot size is used with rounding value. Example as below:
Lot size: MB
Min Lot size: 15000
Rounding Value: 20000
DEMAND: 16000
When MRP run, System is creating the 16000 as P Req instead of 20000 which is the rounding value.
Pl let me know, if I need to apply OSS note / any other solution for this.
Thanks,
JK
Edited by: Janakiram Katakam on May 17, 2010 4:57 AM

Dear ,
Are you using any Rouding Profile in MRP1 view ?
What is the Setup in OMI4 for MB-Lot Size .Remove the tick mark in Last Lot Exat if it is marked .By specifing the rounding value, the system will determine during lot size calculation that lot size qty is a multiple of of an order unit(eg : pallet size if mtrl is delivered in entire pallets...).
Please check what is the Lot Size Indicator or Lot size procedure assinged to it ?
2.you can use rounding profiles...its used to define the setting of rounding up or rounding down the order proposal qty into deliverable quantities...rounding profile maintenance the t-code is OWD1. Here for static rounding profile
Rounding profiles are defined under:
spro-> purchasing->consumption based planning->planning->lot size calculation ->maintain rounding profiles...
it consist of threshold value and rounding value...
the threshold val is the value from which the system rounds the value of the next deliverable units upto...
the rounding value is from which the systemshd round up to as soon as threshold value is exceeded...
Otherwise , Check FM MD_ROUNDING_VALUE
Regards
JH
Regards
JH

Displaying blank value for the Rounding Value field in MM03 transaction

Hello All,
We are using BDC to create a material master record.Some users are not loading the rouding value in the MRP1 screen. The rounding value is stored in the MARC table which has the data type as QUAN. Thus when there is no value being passed it implicitly converts the blank value to 0.00. The users do not want the rounding value to be displayed as 0 when they view the material record using mm03. Kindly let me know if there is any way to display the rounding value as blank if no value is present.
Thanks in Advance.
Regards,
Avinash Sai N S

Hai siddharth,
I have enabled the BADi HRPBSIN_ADDITIONAL_CHECKS to do validations for loans. Can u pls explain is there any FM or wat can be used to set default value for the field in portal.
Pls give some suggestions,
thnaks,
Nalla B.

Cube for Inventory values, prices and quantity

Hi,
Does anybody knows some standard InfoCube that delivers Inventory values, prices and quantity?
I need something like R/3 transaction CKM3 (Material Prices Analysis CO-ML). This transaction agregates inventory quantity, value ( material price) per material/plant, you could drill-down to material moviments level.
I found a InfoCube named 0IC_C03 (Material Movements - see help link), but i can't figure out how this cube works.
http://help.sap.com/saphelp_nw04/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
Regards,
Eduardo

Hi Eduardo,
Now, I am developing a new query, exactly in CKM3 format, but where you can see more than one material at once.
I am using the infocube 0COPC_C07 (Actual Costing/Material Ledger), where I can see the same information as in CKM3 transaction.
I hope this helps,
Regards,
Fernando.

Rounding value for PR Quantity

Similar Messages

Maybe you are looking for