Rounding when creating POs from pruchase requisition

Hi gurus,
when I copy items from a purchase requisition to a PO, I would like the system to round the purchase requisition quantity UP to full packaging units.
E.g. in material master there are three quantity units: piece, package (=10 pieces) and box (=100 pieces). Procurement quantity unit is box, i.e. I can only order full boxes of the material.
Now, when I have a purchase requisition item for 120 pieces and I copy this item to a PO, the system automatically rounds off to 1 box. But I would like to always have it round UP to 2 boxes.
Can this be achieved?
Thanks in advance
Alicia

Hi Alicia,
With help of PP you will have to make roud of profile in T code - OWD1.
Assign it in Material master MRP1 view.
This will give desired effect.
Also maintain purchase order unit in material master as boxes.
Thanks and regards.
Gitesh
Edited by: gitesh mahamuni on Sep 2, 2009 9:23 AM
Edited by: gitesh mahamuni on Sep 2, 2009 9:24 AM

Similar Messages

Users are not able to create POs from PRs having Production Order (F)

Hi Gurus
Users are not able to create POs from PRs having Production Order (F) as creation indicator.
Whenever we are trying to convert the PR to PO we are getting the error message "Requisition has different doc. type NB and item cat. >&<" based on the below OSS# 938154 condition for the creation indicator type F.
Would you please investigate and advise what OSS notes are required to be able to use item category L (subcontracting) on a PO for a requisition generated from a network activity via Procurement Type = "Preliminary requisition for WBS element".
Thanks,
Sada.

Hi Ajay & Andra
Whenever we are trying to convert the PR to PO we are getting the error message "Requisition has different doc. type NB and item cat. >&<" based on the below OSS# 938154 condition for the creation indicator type Production order (F).
Our Business requirement as shown below.
1).The problem - we currently have no way to "direct requisition" an item to be procured via subcontracting - only itu2019s possible via MRP.
2).These behaviors are inconsistent as the requisition process should not impact the procurement process. Can we find a way to influence the creation indicator on the requisition so that it does not appear as a production order?
Please suggest any alternate method for achieving this.
Thanks & Regards
Sada

When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks

When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks. I used to be able to do this in WORD 2003. I tried to create a PDF from Acrobat by selecting File > Create PDF >navigate to the WORD file > select three checkboxes >
Any help with getting the TOC heading entries as hyperlinks?

Try to do it from Word using the ribbon.

My mini iPad is not adjusting automatically to the way i hold it - ie. not spinning round when i turn from landscape to portrait or vice versa - does anyone know how to fix this?

my mini iPad is not adjusting automatically to the way i hold it - ie. not spinning round when i turn from landscape to portrait or vice versa - does anyone know how to fix this?

Understanding the side switch
http://support.apple.com/kb/ht4085

Hii purchase infor record when creating PR from a sales order

Hii
I have found an exit USEREXIT_MOVE_FIELD_TO_ME_REQ when creating a sales order i can modify the table EBAN
there is a special flow where i need to remove clear out the Purchase info record (INFNR) since when creating a sales order the purchase determine his own vendor thus i have an error message which is trggered since the vendor of purchase infor record is different from the sales order vendor.
can you please advise what is the impact of deleting the INFNR data during the creating of sales order. Seems to me that the purchase requisition is not created automatically in this case?

Hi,
IN ECC 6.0 EHP 4, it gets copied from PR to PO but not in lower versions.
Hence you can achieve the same using some PO BADI's or through enhancement spots.
Thanks & Regards,

PO CNV: Auto-Create POs from PUR Reqs generated by OM

Objective: Convert open sales orders and maintain the link to the purchase order for back to back and drop shipment sales orders?
Question: Is it possible to convert the sales orders first. Then run requisition import to create the purchase requisitions in the PO module. After the requisition lines are created, convert the purchase orders through the open interface table or an API by auto-creating the PO from the requisition lines? This would maintain the link between purchasing and order management.
If this is not possible, does anyone have any suggestions? Someone mentioned using BPAs (this assumes I can assign items to specific suppliers).
Any ideas are greatly appreciated.
Thanks

Hi,
After creating a PR, why you want to go thru open interface.
There is a standard functionality : AUTOCREATE, available , which will convert the PR to PO.
On PO Shipment level, you can view the SO number & Line Number also.
Please review the below link.
Oracle Applications - Functional: Business Flow of Drop Ship Order

How to remove 'Outlines' default text when creating shapes from vector layers?

Hello everyone!
You know the text it adds to the name layer when you create shapes from a vector layer that says Outlines? Well, anyone know if it's possible to change it or remove it?
It sucks to have to remove it manually, especially when it's a lot of layers and you've taken the time to do the prepping in illustrator.
Thankss,
Oliver

if I have an illustrator layer that is named icon and I convert it to outlines I get a layer that is named icon Outlines. Are you trying to remove the word Outlines or are you getting just a layer that says Outlines? Personally I would not remove the word Outlines from shape layer because this would differentiate it from the original and let me know at a glance what's going on with the layer and the project. This would be valuable information if I were to return to the project a year later for modifications.

Corrupt image formatting when creating pdf from embedded visio image in MS word

Hello, Using Adobe Acrobat 9 standard and trying to create a PDF file from an MS word (version 2003) document. PDF file created is fine except for an image (embedded visio diagram imported into word). When created in PDF, the image is missing many of the diagram labels, and other text boxes are in the wrong font and wrong location. I don't know if it's my Adobe Acrobat or MS Word settings that need to be updated.
thanks, NB

Dear fellows,
the problem is still present. My system:Windows 7 32-Bit Prof, MS Office 2010 Prof, Acrobat X Pro 10.1.1, Vision 2010 Prof, all updates installed.
Problem #1: Even the latest Acrobat X 10.1.1 version causes Visio 2010 to start with error messages, origin: the Acrobat Add-In. Therefore I de-activated the Acrobat Add-In, again, as in the past.
As I design grafics with Visio 2010, I mark them in the active Visio window, copy the marked parts and then insert them into my Word-Document. So far, so good and as I want it.
The (still present) problem: I can produce a PDF file using the "save as Adobe PDF", but the Visio drawing is incomplete and corrupt. E.g. arrows as line endings have disappeared.
PS: But using Adobes PDF printer sets the embedded Visio drawing correctly! But using the printer one looses some features of the "save as Adobe PDF" command.
Well, probably one day ...
Regards,
Rückenlehne.

Acrobat 9 Quits When Create PDF from Scanner Selected

Hi. I wonder if anyone can advise please.
I have recently installed Acrobat 9 on my MacBook Pro and have plenty of RAM. However, I can "Create PDF from Scanner" just the once. After that, Acrobat quits when I select Scan or quits if I cancel the scan.
I have tried the following:
1. Troubleshoot System Errors & Freezes
2. New User account
3. Recreated Preferences
4. Booted from separate disk
5. Repaired disk permissions
6. Have no third party plug-ins installed
7. Have run Repair Acrobat
8. Changed Universal Access
9. Defragmented disk & repaired files
10. Safe Boot and reinstall Acrobat
Nothing has worked except when I clean install I can scan through Acrobat once.
I can scan from the scanner software - Lexmark 4850 - with a jpeg straight to Acrobat but want to try to solve the issue of scanning straight from the app.
Thanks for your help people.
Regards
Paul

After I discovered my problem of quitting after completing the scan of the first side of a 2-sided document and decided to go to Adobe for help, I should have known I was in real trouble after following their instructions for locating the Acrobat serial number. After bringing up the splash screen and clicking on it, instead of seeing the number the splash screen disappeared! So I had no option but to use the phone. Then their help person couldn't give me the serial number- he had to transfer me- and I chose to stay with him for help instead. He decided it was a conflict between the Acrobat & HP software and ended the help session.
I then did some on-line research and discovered others with the same problem, and came up with the comparison test with the Windows version. Adobe's phone system didn't recognize my Case #, but the second Help person said it worked fine. At that point, I got the feeling that I was in real trouble. After another hour going over the same ground and repeated denials that their software was at fault, the Helper refused my request that they do a Windows comparison test or send me a Windows version to test myself and promised to call me back with results of their "research". That call never came.
On the third call, again with the Case # unrecognized by the phone system, the Helper was even more unhelpful, probably after reading the record of the first two calls. He insisted on going back to the machine and over the same ground once again, and I ended the call.
I agree that the on line approach is better, and I may have to make a double call to get the serial number (neither of the two I have, each different on the case or on the CD worked) and try that if my request for a supervisor fails. Fortunately they are so incompetent that they can't track starting over.
I'm not a programmer, but have lots of varying experience with computers dating back to the first Atari-400. Since your Acrobat uses only the Twain driver component from your scanner software, the first place to look for a problem is in the Acrobat software, especially since the software doesn't run again after the first use without reinstalling, and the scanner continues to perform properly using it's installed software. The Windows comparison test such as Tim Whitfield was able to make, would clearly establish the Mac version of the Acrobat software to be at fault, but would still not resolve our problems. Unfortunately I hold out little hope for either you or I with Adobe, since neither their phone nor the online help has come up with a prior fix. This indicates a bug fix requirement, which for something like this looks to be a relatively long time in coming.

Problems when Creating Pages from Templates in Dreamweaver 8

When creating new pages from templates in Dreamweaver 8(Ver
8.0.2). The full path for images is not created
i.e. in template the code is <img src="main_page_logo.png"
width="814" height="172" longdesc="Main Page Logo" />
In the new file the code should be :-
<img src="../../Templates/main_page_logo.png" width="814"
height="172" longdesc="Main Page Logo" />
but only :-
<img src="main_page_logo.png" width="814" height="172"
longdesc="Main Page Logo" /> is in the code.
but this does work in Version 8.0.
Does anyone know of a setting or fix for this problem

> Does anyone know of a setting or fix for this problem
It was regarded as a bug in previous versions, and was fixed
in the 8.0.2
release. In normal circumstances, ALL links in a template
file must be
relative to the template document, not relative to where you
intend to save
the child pages. Thus, there would be no way to have a link
in your
template document like the first one you show, e.g.,
<img src="whatever.png"....
*unless* the file was actually in the Templates folder (a bad
idea).
In 8.0.2, you can set your PREFERENCES for the Templates
category to NOT
MANAGE relative links. Be aware that this may have unintended
consequences
for you - specifically regarding other relative links in your
site.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"pgs_it" <[email protected]> wrote in
message
news:eivj88$361$[email protected]..
> When creating new pages from templates in Dreamweaver
8(Ver 8.0.2). The
> full
> path for images is not created
> i.e. in template the code is <img
src="main_page_logo.png" width="814"
> height="172" longdesc="Main Page Logo" />
> In the new file the code should be :-
> <img src="../../Templates/main_page_logo.png"
width="814" height="172"
> longdesc="Main Page Logo" />
> but only :-
> <img src="main_page_logo.png" width="814"
height="172" longdesc="Main Page
> Logo" /> is in the code.
> but this does work in Version 8.0.
> Does anyone know of a setting or fix for this problem
>
>
>

Unwanted blank pages inserted when creating pdf from scanner

Hello, when creating a pdf from a document scanned via Adobe Acrobat X Pro, the program inserts an unwanted blank page in between each page being scanned. So, if scanning 50 pages, we get 100, etc. How do we remediate this problem? We have worked with the default settings, to no avail. We're using a Fujitsu fi-5530c2 scanner. We would appreciate any input to help resolve this issue! Thanks Mark

Hi,
you can automaticaly fix previously made documents using the Preflight tool.

TOC not updating when creating PDF from Robo9

I have not really created PDFs from Robo before, so I might be missing something basic. I am trying to create Word and PDF documents from my Robo9 project. My problem is that some of my topics are not being generated, in either the Word output or the PDF output. The topics are indeed part of the TOC in the Robo project, but they are not part of the TOC in the Word and PDF output. The strange thing is, all of the TOC books make the conversion, but the one book I am having the issue with includes one topic, but all of the other topics in that book do not get converted. I tried recreating the TOC, and it still does the same thing. It's almost like the printed documentation generation is ignoring any new changes to the TOC, as it's the same every time no matter what I change. I tried making some changes to topics that are generated, and I can indeed see the changes in the printed output docs.
Anything glaring I am missing, or should try? Thanks.
Mark

Likely a common misunderstanding.
The first time you create printed documentation, the topics are based on the TOC. Thereafter there is no link.
When you add new topics to the project, they are not automatically in any of the TOCs. You have to add them to each TOC. It's the same with print, you have to add them in the print layout.
Easiest way is to simply use the double left chevrons to remove the topics in the print layout and then use the double right chevron to back in, the difference being it will add all the topics in the TOC and as you added the new topics there, they will be in the print layout.
There's more in Printed Documentation on my site.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to derive commitment item and fund center when create PR from MRP.

Dear Experts,
No commitment item and fund center are derived when I create PR from MRP. I have to run transaction fm_mrp_pr to derive commitment item and fund center. However, I want to derive FM assignments during creating PR through transaction MD04. I plan to use user-exit to derive FM assignment while PR is creating from MRP. Which FM bapi, functions,etc... can I use in user-exit to derive FM assignment? Do you have an idea?
Thank you in advance,
Sibel

Hi Sibel,
Please check if note 1247722 and 1127135 are applied in your system. If not, kindly apply it and retest your issue. It should resolve it.
Kind Regards,
Vanessa.

Prevent the Output Message when creating PO from inbound IDOC

Hi SAP Gurus,
In my project, I have to create PO from inbound IDOC (PORDCR) with a specific Document Type ('099').
Requirement: These PO should not generate the output message while the others (Doc Type # '099') do.
I have the Z fuction module which call BAPI_PO_CREATE for posting IDOC and it works fine.
In the existing system, there are some set up that trigger the output message type for PO (output NEU) when using ME21 or ME22, as a result my PO created with output message.
Can you please advise if there are some way (User Exit?) that prevent the output message in this scenario (specific PO Type) without touching the current Condition setup?
I'm new in MM and really need help!
Thanks,
Elaine.

Hi Vinod,
I really appreciate your anwer. I'm going to explore this with my functional consultant.
Just like to have more questions:
1. Is it easier if we change the existing condition table instead of creating a new routine?
2. There are two forms for routine 101 (FORM KOBEV_101 and FORM KOBED_101). Can you explain to me why we need 2 here for what purpose of each form.
3. In the debug mode by using WE19 to post inbound IDOC, I change the SY-SUBRC = 4 and PO created without output message. Is it the right direction? Anything else I need to pay attention to?
Thanks again.
Regards,
Elaine.

Prospect Determination when creating Lead from Account

Hello,
lately we have applied SP9 to our CRM 6.0.
Since then we have an error during the following process:
Search and find a Sold-To Party
From the "Lead" assignment block, click on create
The lead is opened in creation mode but the field "Prospect" is not filled and we receive
=> error message : "Enter Sales Prospect"
I have check in CRM 6.0 SP4 and SP5 and it it working fine.
Besides, we do not have this prospect determination problem when creating an opportunity with the same Partner Determination Procedure.
Would you have any idea?
Thank you in advance and regards,
Didier

Thanks but it is not the problem. The same PDP works fine with an opportunity.
kind rgds,
Didier

Rounding when creating POs from pruchase requisition

Similar Messages

Maybe you are looking for