Roundong-off excise duty values

Hi all!
I need to round-off the excise duty values while passing it through J1IEX.
I did the following,
1. I have changed the rounding rule for condition types JMOP, JEC1, JSEP & JVRD as 'A' (Also i checked with 'B' ) and
2. In SPRO - Logistics general - Tax on goods mvt - India - Basic settings - Maintain Company code settings - Enabled rounding duty on payment for particular company code.
But still while i capture and post the excise amount in J1IEX the values are not rounded-off. Can anybody give some inputs regarding this.
Thanks in advance,
Regards,
Raj.

For all the Conditions Keep the Rounding Rule Blank ie : Commercial then it will Work.
> In SPRO - Logistics general - Tax on goods mvt - India - Basic settings - Maintain Company code settings - Enabled rounding duty on payment for particular company code.
This Setting is Correct.

Similar Messages

Purchase order report with basic price and Excise duty values

Hi All,
Is there any standard report in SAP to get the Purchase order basic price / qty and its Excise duty values ? Since we are including Excise duties for non - codified items (w/o material master and with cost center 'K') Purchase order and the ed values are added to the cost and the requirement is to see the split up (Basic priceEdEcs+Hcs)for these Purchase orders for the vendors. If there is no std report then please let me know how to link Purchase order table with this Condition value table in query to get the desired report.
Thanks in advance
Benny

Hi,
there is no standert report to fullfill this requierment
you have to create this report with the help of abaer
for that which tax code you are using its importnat thing
for po table EKPO
1. A524 (Normal supply point / Material) it will return condition record number for condition type.
2. KONP (Conditions (Item)) .
3. J_1IMTCHID (Combination of Material Number and Chapter ID).
4. J_1IEXCTAX (Tax calc. - Excise tax rates
5 get the IR no. from RBKP and RSEG, and get the relevant FI doc no. and goto BSET table
for IR number to get from table apply logic for doc type RE ,you will get fi number nad in refernce field you will get invoice number + fiscal year
Map this by refernig on po for which grn and invoice happen
Regards
Kailas Ugale

Excise Duty Value in Export Invoice - Very Urgent

Hi Gurus,
I have created a Export delivery & Billing Documents. I am trying to create Excise Invoice in which Excise Duty values are coming as "0". We are using TAXINN Procedure , ECC 6.0
Is there any specific note or any customization required for this ?
Due to this ARE1 is also giving "0" values & subsequent "0" value in Bond Register.
Can anybody help me on this ? It is very urgent.
Thanks in advance
Vikas

Hi Vikas,
Could you help yaar ...if you got solution for it ..I am facing same problem..We are going live very soon,
help of ur's could help me lot ..My mail id [email protected]
Thanks in advanec in for your help.
regards,
Vijay Khochare

Excise Duty values getting inventoriesed in MIGO but reversed in MIRO

Dear Experts,
I am using Taxinn procedure and while creating the PO the excise duty values are calculated properly but when I am posting the MIGO the stock value is posted along with the Excise duties. The excise invoice is captured & posted in MIGO itself and the values are posted correctly.
While posting the MIRO the excess amount is posted at the time of MIGO is posted back to the material. How do i fix this??
thanks in advance
Suresh

Hi Jayakantan/Ashok
thanks for the replies
I am using Taxinn procedure and the conditions are flowing from that procedure. In the purchase order i am giving the condition types only for basic price and freight.
As far as i know, the account key determines whether the condition type is cenvatable or to be inventorised. If i give the account key as NVV the values get inventorised. If i give the other account keys and assign the gl accounts to that account key that value will be posted to that gl account and not inventorised. Correct me if i am wrong or is there any other settings which will define so.
I have done the following settings as well for the condition types
spro>log gnrl>tax on goods mvmt>india>basic settings>maintain cond typs>classify cond types
and one more similar setting in the same path.
do i need to do anything further?
Suresh

Excise duty values not flowing from PO to MIGO

All SAP Gurus,
We have created a PO and used excisable tax code in it.
Excise duties are calculated correctly in PO.
When we go for Goods receipt against the PO, excise tab appears, but there are no values in excise fields (fiels are blank).
System allows us to enter the Excise duty values manually.
Further excise entries and register updates are happening correcetly.
We do not undersatnd why the Excise duty values are not flowing automatically from PO to GR (MIGO).
Please help.
Regards,

hi
chekc following
path: spro>logistic general >tax on goods movements>india >basic settings>determination of excise duty >maintain excise defaults >
here give appripriate conditions for ur procedure as per BED cess and other
regards
kunal

In dealer Invoice , Excise duty values not captured from MIGO

In dealer invoice , I have changed excise duty values in MIGO . This is not captured in MIRO. But the system took excise value from default values ( from FV11 condition record ) . This is happening for New plants. Old plants works good.
Regards.,
Lakshmanan.S

hi,
create a PO with zero tax code. such that base amount is equal to the inclusive of all excise duties.
IN migo select the capture and post excise option, in the excise tab, activate the mrp indicator .
change the base value in the migo and manually enter the excise duties in migo, capture it and then post
create MIRO with reference to the PO and give the taxcode as V1(ED-8%CESS-2%HECESS-1%)instead of VO(ZERO TAX CODE)
Regards,
velu

Excise duty values not floating to J1IEX_C

Hi all,
I created a PO with all Excise duties like BED, CESS, SECess etc..
When i try to capture the excise invoice i can see only Ecess and SEcess but not Excise duty( JMOP )
We are using TAXINN and duties were maintaiend thro FV11.
How to fix this.
Pl reply
Thanks
A.Gururajan

Check weather it comming for other material
if not comming
than check
check what is the condition type for 100% bed it would be JMX1
check in po if JMX1 is having value
IF value not there then chec ur tax procedure is the calculation is correct or not
if value coming
check in Maintain Excise Defaults
A/P BED cond should have JMX1
also check Classify Condition Types
TAXINN JMOP BED Set Off condition Percentage
TAXINN JMX1 BED Set Off condition Total
this 2 entries should be there
hope this helps

Excise Duty Value

Hi,
Iam using TAXINN procedure. My customer wants to capture the excise value of the material while it is purchased from the First Stage dealer. While material is purchased from manufacturer we have definite exxcise duty percentage but when it is purchased from dealer he passes only the excise value for which he purchased.
Dealer purchased price
Material X = 1000
Excise duty =100
Purchased from Dealer
Material X =1200
Excise duty =100.
The excise duty is 100 because the dealer can pass only 100 for which he purchased.

Hi There,
For the First stage dealer scenario you need to create the PO with duty + net price of the material, you can put the sum of thease two factors in Net price field at Po line item detail..
Don't put any taxes on the invoice tab at item detail level of PO.
That means taxes are zero.
Now while doing the MIGO (GR) while capturing / capturing and posting the duties, at the item level for each lime item of GR enter the excise duties manually from the physical excise invoice.
At the header level in excise tab, click on the radio button just near the option of capture and post excise duty at header level.
Once in select the misclleneuos tab and click on the MRP (Maximum retail price), it will deduct the tax amount from the net price of the material.
Hope it clears your doubt.
Regards,
Sujoy

Error in excise duty values in RG1 register

Dear All,
While extracting the RG1 registers it has been found that values for Basic excise duties, Education cess and SH edu. cess are not appearing properly.
I have verified the following
1. There were 3 deliveries against which 3 separate invoices have been created. Against these 3 invoices, 3 excise invoices have been created. All the inoices are posted to accounting.
2. Sales material as well as sold to and ship to parties are same in all the three invoices.
3. Dispatch location i.e. plant is same for all 3 invoices.
4. In J_1IEXCDTL table EXBAS as well as EXBED, ECS and EXADDTAX1values are appearing properly for all the 3 line items.
But no values are coming for 2 line tiems; whereas correct values are coming in 1 line item in the Excel download as well script for RG1 register.
Please help ASAP.
Thanks & Regards
Piyush

Dear Lakshmipathi,
All the 3 invoices are psoted to accounts. All the 3 excises invoices are also posted to accounts. Duty values are flowing properly.
The problem is in the RG1 register extraction.
BED, ECS and HCS values are displayed for line 1 but it is blank for remaining 2 line items.
Thanks & Regards
Piyush

Excise Duty Value not flow from J1IJ to VF01

Hi SAP Expert,
I am facing the problem in Invoice to Customer(from Depot). Excise Values are not flowing from J1IJ for pricing procedure JINDEP. I maintained Alt Cal type as 356 in Pricing procedure JINDEP for Excise condition types JEXP. But it is still not flowing. I am using Tax Procedure TAXINN.
Do I need to go to VTFL In item level copying requirement to set pricing type: to C ??
But once i set, it will impact other billing document too. Please advise.
Thanks.

Hi,
I have successfully posted Excise Invoice at Depot using J1iJ.
When i create billing via Vf01, i am unable to see the value of Excise Duty in item pricing condition from J1iJ.
I analyse the pricing condition for condition type JEXP, below is what i got :
This message tells you that the condition record exists, but has not been set in the document. If pricing was carried out again for the document item, then the condition would be set.
There are different reasons for this:
1.The condition was deleted manually in the item condition screen.
2. The condition record was created later. Please note that order processing and pricing have buffer mechanisms. This means that a newly added condition record might only be found after order processing has been left completely and then started again.
If the condition type is used for subsequent settlement (rebate), there may be subsequent updating of business volume (the agreement is is created retrospectively). The document conditions do not contain the condition record, as the condition record was not created when pricing was carried out. Updating of business volume is carried out using special functions for subsequent settlement.
1. When an item was added, the condition record was accessed with key fields other than change time. This could lead to different results in the requirements check at the time of adding and the change time. This can occur when modifications are made.
2. In billing (or when copying orders): Certain condition types were not determined in the source document (this is usually controlled by the pricing requirements). When creating the document, the document flow (TVCPF,TVCPA) is processed using a pricing type that does not redetermine these condition types, although they are supposed to be called via the requirements.
Is it correct that i assigned routine 356 to Pricing Condition JINDEP ?

Excise duty value on sales invoice not reflecting in the actual cost

Hi,
we are paying excise duty, when we are removing material from plant for the particular project. Now excise duty paid is reflecting properly in the actual cost colunn of the the report s_alr_87013558. Secondly when we are rasing commercial invoice to the customer & excise duty paid earlier is recovered from the customer, now excise duty recovered from the customer is not being reduced from the actual cost.
Cost elment for excise duty paid - 6101100, with category 1 - primary cos/ cost reducing revenue.
Cost elment for excise duty recovered - 3801090, with category 11 - Revenue.
Kindly guide how to update(reduced) excise duty revocvered in the acutal cost.
regards
Sanjay

Hi Mohan,
Please use the formatting options to format ur question...!!
Thanks,
Tatvagna.

Excise Duty Values is not calculated in Po

Hi,
Even though we have maintained the Excise rates in J1ID the and the corresponding Tax Code in FTXP
when we check the Pricing in the PO the Excise Values are not calculated.
Can any body please help me.

dear sir
please check for you vendor , vendor excise details maintained in J1ID , and Excise tax indicator for vendor
1 you have give or not check.
also check excise indicator for the plant in J1ID. Excise tax indicator for company, give 1.
then create the PO and check the excise amount.
regards
jrp

Rounding of Excise duty

Hi,
I have made Excise duty Rounding Rule "commercial" but still it is not rounding off in Sales Order.
also i have made Requirement 13- Rounding as per T001R still it not rounding
Reg,
amol

HI
Assign Alt.Cal Type : 17 In pricing procedure \
Check the Rounding unit with your Company code & Currency - T-Code OB90
Check the Below link also
[Rounding off Excise duty value at header level |http://forums.sdn.sap.com/thread.jspa?threadID=1085479]
Check the Cycle and Revert
Regards,
Prasanna
Edited by: prasanna_sap on Feb 18, 2012 8:44 AM

Editing base value or excise duty during Posting of Excise invoice

Hi,
System is getting greyed out and not allowing to change the base value or Excise duty values during posting of excise invoice, where as it is allowing during capturing the excise invoice. How to change this?
We require facility during posting. Is it possible?
Regards,
Sattuj

Hi,
Please maintain the Assessable Value in J1ID for the material and also maintain the condition records for your excise conditions such as BED, ECS & SHECess in FV11 and try.
Thanks & Regards,

Excise Duty is not gettig posted in accounting doc

Dear Experts,
In one of my excisable plant, in pricing procedure, excise dutyeducation cesshigher edu cess is calcualted on the basis of base value, which is coming fine. But our requirement is that base valueexcise dutyeducation cess+higher edu cess, combine value should come in Net Value field while making order & invoice. Because of the same reason, excise duty value is not posted in FI, accouting doc of the same is not generating as only base value accounting documents got generated. I have tried by changing the subtotal value but it doesn't work. Kindly help.

Dear Prashant,
Thanks for reply, but i checked my excise cond types, in all conditions, cond cat is blank & cond class 'A' is maintained i.e. Discount & Surcharge.
My problem is that, my excise value is not got posted in net receivable value in accounts. This problem arise, when we make sales order, Net Value field doesn't pick excise there & while invoicing, it post only the base value & rounding off adjustments at header level. I don't know, from where this Net Value field in sales order is picking the value but my problem will solve if my grand total value(base valueexciseedu cess+higher edu cess) will pass to Net Value field while making sales order. Kindly help.

Roundong-off excise duty values

Similar Messages

Maybe you are looking for