Route calls to two different CSQs, but show single set of Service Level stats on report

We have a single node UCCX 9.0.2 Premium environment to handle our ACD operations. Our agents take inbound customer service, claims and sales calls for a few dozen of our clients. All of these calls are currently taken by the same two teams of people regardless of which client it is for, with the sales calls going to one team and the customer service and claims calls going to the other team. There is a Sales CSQ and Skill for each client, and a Customer Service CSQ and Skill for each client. Currently the caller is presented with a menu giving two options...press 1 for customer service, press 2 for sales.
What we are looking at doing is adding a third prompt specifically for claims. Claims issues are handled by the Customer Service team, but only certain members of the team. Obviously I can create a new CSQ and Skill for Claims for each client, then have the new prompt route to the CSQ for Claims.
The challenging part is the reporting for this. We have to report Service Level statistics for Customer Service calls (but not sales) for each client, to show whether or not we're meeting the service level agreement requirements. The splitting out of claims calls to be handled by specific people is something being requested by our internal management, not the client. But as far as the client is concerned those are customer service calls, they would count toward our customer service SLA, and they expect to see a single SLA statistic reported.
I know that it's only possible to add multiple skills to a CSQ and force agent selection based on a specific skill in CCE (not available in CCX). But is there any way to script my way around this to get the same end result, and have the reporting data still reflect a single set of CSQ service level stats?

Thanks Aaron. We're running HRC right now, but I've been dying to switch us to the version of CUIC that's built in to CCX for quite a while and it appears I may be able to do so soon. I'm hoping to utilize some of the additional flexibility of the saved reporting templates in CUIC to massage the data formatting as needed.
CUIC Premium is something our management will be considering, but I'm anticipating the license for it being very expensive and probably causing them to eliminate it as an option. Unfortunately I haven't been able to get my hands on a demo copy of it to try to "sell" it to them either.
Thanks again for your help Aaron.

Similar Messages

Running two different skype calls on two pc's but ...

Hi All,
So I don't have the means to test this before I actually need it.
But would it be possible to run two different skype calls on two pc's but on the same account.
So I'm logged in with one and the same account on both pc-A and on pc-B. With pc-A I want a video call with person X, and with pc-B a video call with person-Y.
Can this be done on the same account at the same time? Or should I make a seperate account for that?
Kind regards,
Solved!
Go to Solution.

Theoretically this can be done, but very soon your account will be flagged as abusing the Terms of Use, and the account might be blocked.

How do I merge two different libraries, linked to one account? They're on two different computers but I want them to be on one

How do I merge two different libraries, linked to one account? They're on two different computers but I want them to be on one

This should do the trick
Home Sharing Learn More
http://support.apple.com/kb/HT201976
Best of Luck

I want to order prints from two different albums but don't want to pay shipping twice?

I want to order prints from two different albums but don't want to pay shipping twice- How do I do this?

Select all the photos in both albums and order - or make a temp album containing all photos you want to order prints of and select all and order
The easiest way is the second suggestion -- make a temp album containing all of the photos and select all
LN

Update two different tables by a single sql query:

Hi All,
i need to update two different talbes in a single sql query..
i m using the following query
UPDATE FT_User_Alert SET Subscription = 'W' where product_key=1 and measure_key = 12
AND
UPDATE LU_Monthly_Alert_Budget_Sheet SET Min_Red_Range ='16.0' AND Max_Green_Range ='24.0'AND Max_Red_Range ='27.0'AND Min_Green_Range ='16.0' where product_key='1' and measure_key = 12
i m getting the following error:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43093] An error occurred while processing the EXECUTE PHYSICAL statement. [nQSError: 17001] Oracle Error code: 936, message: ORA-00936: missing expression at OCI call OCIStmtExecute: UPDATE FT_User_Alert SET Subscription = 'W' where product_key=1 and measure_key = 12 AND UPDATE LU_Monthly_Alert_Budget_Sheet SET Min_Red_Range ='16.0' AND Max_Green_Range ='24.0'AND Max_Red_Range ='27.0'AND Min_Green_Range ='16.0' where product_key='1' and measure_key = 12 . [nQSError: 17011] SQL statement execution failed. (HY000)
SQL Issued: EXECUTE PHYSICAL CONNECTION POOL writeback UPDATE FT_User_Alert SET Subscription = 'W' where product_key=1 and measure_key = 12 AND UPDATE LU_Monthly_Alert_Budget_Sheet SET Min_Red_Range ='16.0' AND Max_Green_Range ='24.0'AND Max_Red_Range ='27.0'AND Min_Green_Range ='16.0' where product_key='1' and measure_key = 12
but when i m ushin the same query in Microsoft SQL Server it executes properly:
please help me out...

Duplicate thread. I've already answered on your other thread...
update two different tables by a single sql query:

Taking data from two different server in a single table

Hi All,
can u plz tell me i want take a data from a two different server in a single table
Thanks,
Bell.

Again, you have written the same sentence. I have 2 servers Server1 and Server2 and one table called my_table (You or God knows where this table is).
Now tell us what you want to do ?
Sidhu
http://amardeepsidhu.blogspot.com

Pricing for two different components in a single assembly

Dear All,
Issue is regarding if we maintain two different components in a single assembly.
Say A nut & Screw assembly, Nut value is fixed & screw value differs as the length of screw differs each time.
Issue is how to maintain the pricing OR price.
i/ps will be of great helpful & rewarded too.
With Regards,
Vijayashree
Message was edited by:
Vijayashree nair

Hi Vijayashree
Normally you will maintain price ONLY for the final product which you are going to sell. So in that case, the question of maintaining price for components does not arise.
However following options are available in SAP
If you want the system to carry out pricing, inventory control, and delivery processing at main item level, enter ERLA in the Item category group field of the Sales: sales org. 2 screen in the material master record of the finished product. This means that the components only function as text items and are not relevant for delivery. The following graphic shows how a bill of material is processed at main item level.
If you want the system to carry out pricing, inventory control, and delivery processing at the component level, enter LUMF in the Item category group field of the Sales: sales org. 2 screen in the material master record of the finished product. In this case, only the components are relevant for delivery. During processing the system automatically creates a delivery group. The latest delivery date among all the components becomes the delivery date for the entire delivery group.
Thanks
G. Lakshmipathi

One target table is loading from two different source but same columns but one source is in a database and other is in a flat file.

Hope you all are doing good.
I have a business issue to be implemented in ODI 11G. Here it is. I am trying to load a target table from two sources having same coulmn names. But one source is in file format and other is in Oracle Database.
This is what i think i will create two mappings in the same interface using Union between the sources. But i am not sure how the interface would connect to different logical architecture to connect to two different sources.
Thanks,
SM

You are on the right track, this can all be done in a single interface. Do the following
1) Pull your file data model into the source designer and and your target table model to the target pane.
2) Map all the relevant columns
3) In the source designer create a new dataset and choose the UNION join type (this will create a separate tab in the source designer pane)
4) Select the new dataset tab in the source designer pane and pull your source oracle table data model into the source designer. Map all the relevant columns to the target
5) Make sure that your staging location is defined on a relational technology i.e. in this case the target would be an ideal candidate as that is where ODI will stage the data from both file and oracle source and perform the UNION before loading to the target
If you want to look at some pretty screenshots showing the steps above take a look at http://odiexperts.com/11g-oracle-data-integrator-part-611g-union-minus-intersect/

How to route traffic between two different interfaces

Hi,
I need to setup a routing between two different interfaces on a host.
Inferface ce1 : 192.168.120.12
Inteface ce2 : 192.168.110.50
Is it possible to add a route which enables the ce2 interface to catch packets from the ce1 interface ?
Regards,
Armin

The problem is a application which is only able to listen on one interface.
To fix this, I have to make all packages visible on one interface.

How to Display two different objects in a single table header in Cross Tab?

i All,
I've a reqiurement for a Cross Tab Report like I need two different objects that should be displayed side-by-side, one object's values after another in a single header. In the picture below I've shown the objects separately in two rows, top header having BSNLNL,MTNLNL,RCOMNL and Header-2 having AIRTIL,RCOMIL. But requirements needs to be showing like this,
BSNLNL
MTNLNL
RCOMNL
AIRTIL
RCOMIL
Actually, the data for the header comes from a single object called Operator. I've show the Operators name ending with NL and after that names ending with IL. So, i've separated the data into two variables using the below formulae.
IL:
=[Billing Operator]
Where
Match([Billing Operator];"*IL")=1
NL:
=[Billing Operator]
Where
Match([Billing Operator];"*NL")=1
Also, the NL data should start first and after the NL data's last value ends, the IL data should begin.
One more thing is that I've to show '0' for null values. So i've used the below formulae on the column data. You can see below that except the "Outgoing ILD Mins in the month from Mobile Network" everything else showing fine. I don't understand why.
=If
Substr([Franchise];3;1)="M"
Then
   [Mobile Outgoing Charged Usage Minutes]
   Else
   0
I tried different approaches but couldn't find a solution. Could you please help me?
I'm using BO WebI 4.1 SP1
Regards,
Naren Vema.

Hi Naren,
No need to split Billing Operator object. Create a variable-
V_IL_NL= If Match([Billing Operator];"*IL")=1 Then "IL" ElseIf Match([Billing Operator];"*NL")=1 Then "NL"
1) Put V_IL_NL variable below Billing Operator object header.
2) Sort and create break on this variable.
3) Delete Footer column. it will automatically create when you apply break.
4) Hide V_IL_NL variable from this header.
~Anuj

It is possible to use two different accounts with a single Windows PC?

My wife and I use two personal iPhone 5, with two different appleID. At home we only have a windows 7 PC connected via iCloud with my iPhone 5 and my iPad (with the same appleID). I wish I could also connected the iPhone 5 to my wife, but i can't do it! It is possible? If it is, how should I do? I installed the program iCloud accepts only one appleID...
Thank you in advance who can help me!

Setup 2 user accounts on your PC, one for your wife and one for you. Enter the relevant Apple ID into each user user account.

Two VGA monitors don't work with two different G4s, but both work with G3!

I recently acquired two used Power Mac G4s (one of them is a mirrored-door dual-processor that I got from school and was told should work, the other is a Gigabit Ethernet model, and should also work), from two completely different sources. They both turn on (I get a power-on light, I hear HDDs churning, and I get a power chime from one of them, and they react to the usual Mac stimuli, mouse and keyboard light up, reset button works, etc.) but I get *absolutely no video*. The monitor syncs for a second, like it gets a quick signal, then goes immediately back to the "CHECK SIGNAL CABLE" message.
I have tried them both with two generic PC VGA monitors (though they were both kind of old and crummy ones, they work on my G3 and other computers. I've tried the working PCI video card from my G3, that doesn't work, nor does swapping their video cards. They both have Apple-supplied ATI AGP video cards, both with Apple's proprietary ADC interface, though one has only DVI out (with a DVI to VGA adapter that came with it) and the other has a straight VGA port.
The weird thing is that, even though these computers have never, er, met before, they have the exact same problem. The only thing these things have in common is the monitor I'm using. This leads me to believe
The only thing left I can think of is to hook them straight from the DVI port to my HDTV, but I don't have a DVI cable, much less know ANYTHING about DVI. Could it be that these particular VGA monitors don't like AGP video cards, or some sort of weird incompatibility that isn't well known?
I figure if anyone's seen something like this, you guys have. Here are the AppleHistory entries on these machines, if it helps:
http://apple-history.com/body.php?page=gallery&model=g4giga&performa=off&sort=da te&order=ASC
http://apple-history.com/body.php?page=gallery&model=g4_mirror&performa=off&sort =date&order=ASC

The software on the hard drives may be set for a video setting that won't work with your monitor. A few things to try (in order):
1) Reset PRAM. Hold down Cmd-Option-P-R when booting until you hear the third Boing.
2) Hold down Option when booting. Should show symbol of hard drive, plus a couple of arrows.
3) Boot from a CD (Install disk or, preferably, Hardware Test Disk).
4) Safe boot. Hold down "S" just after the boing. Release it when (if?) you see the turning gear.
If it is a scan rate problem, one of these should show some video.

Two Different Imported TIFFs Show The Same Image in Premiere Pro

I noticed sometime ago that some imported TIFFs with alpha channel are not showing the correct image. Recently I upgraded to Premiere Pro CC (for PC) to see if such issue was solved, however it is not.
Basically just importing the TIFFs into the project panel results in Premiere showing the same text even though the actual TIFF files contain different text. This is quite bizarre. No other software (including FinalCut Pro) displays such odd behavior.
I have uploaded the two TIFFs that replicate this issue consinstently here: https://drive.google.com/folderview?id=0B2IT1EAcyLlBZXRlMDkxNzY3d1U&usp=sharing
To replicate, just create an new empty project and import these two TIFF files. You will notice that both show the same text within Premiere while outside they indeed show the different data.
Anybody has any clues on why this is happening and on how to solve it?
Thanks in advance for any help and clues.
Valerio

Thanks for your reply.
At this moment we can't export PNGs with an Alpha channel so we are stuck with TIFFs.
It is a bizarre issue though.
Here is a Dropbox link for the images, seems Google Drive download links are buried deep:
https://www.dropbox.com/sh/gktixc0cdbhr3oz/jPCI8yciY-

Fetch records from two different dbs and show it in a single af table

Hi,
I have a requirement, such as say, there are two databases having their own employees table. I need to query them both and show them in the UI using the af table tag. Any idea how this can be achieved efficiently please ?
regards,
Vijai

Hi,
Always mention your JDev version. Are you going to make the resultant data as read-only? If yes, you can create a db link pointing to another schema, and then use union all to merge the data in the query of the VO.
Ex:
select col1, col2, col3 from table1
union all
select col1, col2, col3 from table2@db_link_pointing_to_diff_schema
-Arun

Two different ways to show a JPopupMenu - the differene

Hi!
I am wondering what the difference between these lines are:
myTable.setComponentPopupMenu(tablePopupMenu);and
tablePopupMenu.show(myTable, evt.getX(), evt.getY());I have noticed that if I use setComponentPopupMenu(Component c) in a MouseListener for a JTable, I can just select a row once. I´m sure there are solutions for that, but stComponentPopupMenu must be harder to work with than a JPopupMenu.show() method. Am I right?

Again, have you read the API. This method was added to make it easier. Well, the API says if you set a popup menu to a component, then it will pop up (depending on the bindings).
If I use the JPopupMenu.show() method in a mouseListener, it will also pop up. I can not see the difference. It is still the same amount of code, just one row.
I just discovered when I was trying with my NetBeans application (almost generated code) and my own written code, that in my own code I was using a mousePressed method and in the NetBeans application a mouseClicked. The functionality of both the codes are now the same after I have changed to mousePressed in my NetBeans application.

Route calls to two different CSQs, but show single set of Service Level stats on report

Similar Messages

Maybe you are looking for