Route determination problem in Stock transport order

Hi,
At present,i am using the plant 0001 and storage location 0001.It is determining the Route as 000001.When i changed it in STO to 000002.It is automatically coming back to old one.
How to change it to 000002?
If we need to any customizing,please tell me the path.
Thanks
Srini

The correct route should be maintained in the customizing for the departure country and the receiving country with the shipping conditions and transportation zone etc.
You need to define this in customizing under logistics execution > transportation > Basic transportation functions > Routes > Route determination > Maintain route determination.
Check the route here. Also check the route whici defined in your related customer master data

Similar Messages

Problem in stock transport order

Hi all,
In stock transport order in item condition tab is not updating .will it updates are not .If it updates what are conditions are to be maintained
Thanks & regards
vr

hi
plz check configuration as follows
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight / delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08 and also assign the Accrual Key to this and do the Account Determination for this Accrual Key in OBYC
At the time of PGI, following accounting entry will get generated;
Stock A/c - Dr - 110 INR (Receiving Plant)
Stock A/c - Cr - 100 INR (Supplying Plant)
Freight Clearing A/c - Cr - 10 INR (Supplying Plant)

Route determination screenshots and stock transfer order urgent

Hi sd gurus,
Can any one plz send screen shots of routedetermination abd sto to my mail id
[email protected]

There is difference in Stock Transport Order and Sales. In Stock Transfer, Material is being Transfer from one location of the company to another and not sold to Customer. Hence in the case of STO there will be no entry as below:
Customer A/c Dr
To Excise Duty Recovery Account
That will be in case of Sales.
Regards,
Rajesh Banka

Problem with stock transport order account assignment

hi gurus,
I've a situation in ECC 6.0 environment in regard to STO that I hope you can shed some lights.
We're doing an upgrade from 4.6 to ECC6 and I'm doing some preliminary tests in the new box and I'm getting KI235 error message "Account xxx requires an assignment to a CO object", when I try to posts goods issue from the delivery document. When I assign a dummy cost center to the cost element, I can post the document and I get a CO and SPL accounting documents. In 4.6 there is no accounting document generated as the result of goods issue and this is what client wants. I've checked the release notes and OSS as well checked the setting for automatic account assignment in MM but I couldn't find any difference. I need to add that the material that I use is non-valuated but there is an accounting view for the material with valuation class. I'm just baffled that the goods issue for the same materials in 4.6 works without producing accounting documents but it doesn't work in ECC.
Any suggestion is greatly appreciated.

Hi
If the material is non valuated then the accounting view should not be present, by mistakenly may be you have maintained the accounting view for the material type & maintined the accounting view in Material master.
If you dont want the accounting document generated, then you need to first de-select the accounting view for the material type & make the material as non valuted by removing the flag on Value update for the Plant.
now create anew material & test the transaction, if you want to use the sam eold material then make the Moving average price of the material to zero first & then change the Price control to S. & Test the transaction.
Thanks & Regards
Kishore

Stock Transport Order Pricing Procedure

Dear Experts,
Please let me know the opssibility to configure pricing procedure for STO (Stock Transport order between two plants of same Company code..
Pls explain in detail

Hi,
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condiiton type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight/delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08

Procurement cycle in third party order and stock transport order.

please provide me in steps the procurement cycle in third party order and stock transport order.

Hi,
STO Process: -
1.Create a vendor for the company code of receiving plant, using account group :0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In Pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings , Create the STO using T-Code:ME21N and maintain pricing conditions of freight and Save.
11. Create Delivery :VL10G
Click on the Background Button after selecting line item
A message is flashed : See log for information> next Click on Log for delivery creation Button >click on line item>click on document button to get Delivery document No
12. Picking, PGI:VL02N
13. Billing:VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Pricing configuration for STO: -
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight / delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08 and also assign the Accrual Key to this and do the Account Determination for this Accrual Key in OBYC
At the time of PGI, following accounting entry will get generated;
Stock A/c - Dr - 110 INR (Receiving Plant)
Stock A/c - Cr - 100 INR (Supplying Plant)
Freight Clearing A/c - Cr - 10 INR (Supplying Plant)
Third Party Process Flow: -
1) MM01 - General Item category Group should be BANS in basic view of material master.
2) VA01 - Creation of sales order with VA01 transaction in SD module
3) When sales order is created system automatically creates a PR for the material with item category as "S"--> Third Party Item
4) ME21N - Directly PO with item category as "S" and delivery address as customer address
5) MIGO - Statistical GR by MM ( When it is made goods are received and delivered)
6) MIRO - Invoice by MM for vendor
7) VF01 - Billing by SD on Customers

OCTROI POSTING DURING STOCK TRANSPORT ORDER

Hi,
We have the following scenario.
Octroi has to be paid during goods transfer from one plant to other. I'll be having an octroi agent who'll be paying the octroi for on my behalf. and the actroi agent will get this amount reimbursed once in a month.
We dont want to load this component to inventory. Ideally we look for a posting like the following during STO delivery.
Cost =100
Octroi=10
accounting entry during goods transfer:
Debit receiving plant - 100
Credit issuing plant - 100
debit octroi Expense -10
credit octroi payable -10
Accounting Entry during Octroi agent payment:
Debit octroi Payable -10
Credit Octroi agent - 10
Is this entry possible in SAP.
If not is there any logical reason why it is not possible.
If possible how?
Regards,
Prasad.

Hi,
Pricing configuration for STO: -
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight / delivery cost conditions for Octroi Charges in M/06 and assign in pricing procedure "RM2000" in M/08 and also assign the Accrual Key to this and do the Account Determination for this Accrual Key in OBYC
At the time of PGI, following accounting entry will get generated;
Stock A/c - Dr - 110 INR (Receiving Plant)
Stock A/c - Cr - 100 INR (Supplying Plant)
Octroi Clearing A/c - Cr - 10 INR (Supplying Plant)

Stock transport order getting closed with partial delivery

I have a problem here .Stock transport Order gets automatically created in SAP ( by means of inbound IDOC).
Suppose the STO Quanity is 10 pcs and delivery note is of just 5 PCS.
The STO Purchase Quanity changes to delivery note Quanity i.e 5 pcs and changes the status of the STO to close .
Delivery note also gets created automatically by incoming IDOC.
I think this is a problem with some custom program logic which processes the delivery note for the STO,
Anyone who has faced this scenario before , pls help whether this is SAP standard ??????

I am not sure because what happens is if order quanity is 10 pcs and delivery note is 5 pcs , the PO order Qty changes to 5 pcs and gets closed,
I think this is not SAP standard and hence it could be related to some ABAP Program behind.
Please clarify.

Problem in creation of STO(stock transport order)

hi all SAP gurus,
i am facing the problem in creation of stock transport order with ME21N code. i m getting the error msg of "Not possible to determine shipping data for material in STO "
i have checked the stock transport order setup in customization. but not getting the clear idea to come out from this problem.
if anybody have the idea of " how to do the customization of stock transport order setup, pls. let me explain.
thnx in advance.
rgrds,
rajesh

Hi Rajesh,
when ur creating STO with UB doc type, then you have to maintain material in both the plants.
Regarding the error which is comming for you, you have to check the settings at
SPRO- IMG- MM-Purchasing-Set up stock transport order- Assign delivery type & Checking rule
here for document type UB and your supplying plant-XXXX select nothing for Dlv type(delivery type) and chr - 01 and after this save.
After this you create STO as you are doing and see what the system is prompting.
For any further clarification let me know.
Regards,
NJ

Stock Transport order issueing storage location determination

Folks,
In case of a Stock transport order scenario in which plant A with SLOC1 delivery to plant B with SLOC 2. Is there any option how the issueing storage location can be determined? The delivering plant can be determined through the special procurement key but there is no option for the issueing SLOC.
Regards,
MdZ

Hey Karen!
I am not sure if I understand your problem correctly.
You do not want the system to create a new MARD entry when postin goods issue.
You can enable/ disable this function with transaction OMB3 in the customizing.
have fun
Flo

Stock Transport Order-shipping point not determined

Hi MM Gurus,
We need to set up STO for transferring stock from plant 2000 to 1000. I have completed following setting.
IMG
Enterprise Structure-Assignment-Sales and Distribution-Assign sales organization to company code
Both the sales orgnizations are in same company code. We have only one company code.
Enterprise Structure-Assignment-Sales and Distribution-Assign sales organization - distribution channel - plant
The sales area 1000 is are assigned to both the plants 1000 & 2000 and sales area 2000 is also assigned to both the plants.
Enterprise Structure-Assignment-Logistics Execution-Assign shipping point to plant
Plant 1000 is assigned to sales area 1000 & 2000. Plant 2000 is assigned to sales area 1000 & 2000.
Materials Management-Purchasing-Purchase Order-Set up Stock Transport Order-Define Shipping Data for Plants
For plant 1000 & 2000 cusomer master 56 & 57 respectively are maintained. The sales orginzation for these plants are 1000 & 2000 respectively.
Materials Management-Purchasing-Purchase Order-Set up Stock Transport Order-Assign Delivery Type and Checking Rule
Delivery type NL has been assigned to document type UB.
The details of customer master 56 & 57 are as below
Account Group - Sold To Party
Reconcilliation account -121000
Delivery plant 1000 & 2000 respectively
Please note - No vendor number is maintained in these cusomer masters.
Created these plants as vendors
Account group 0007(Plants) and assigned plant numbers in the additional data of purchasing.
Material 251 is created and maintained in both the sales orgnization.
Now when I am creating the STO for transferring goods from plant 2000 to 1000, I am getting error message.
"Not possible to determine shipping data for material 251"
Am I missing something? Some documentation say that I should create a receiving plant as customer in the sales area of supplying plant. If this is true, how to do it?
Also, what is the significance of return vendor (maintaining vendor master in the customer) in this case?
Your any clue will be appreciated.
Thanks,
Shekhar

Shekhar,
Customer must be maintained as a shipto as well.
In your STO config settings you don't need a customer assigned to the source plant, unless it will also be a destination plant (e.g. you also intend to execute STOs in the reverse direction, or from another plant).
While looking at your customer (shipto), you will also want to look at Route Determination for this customer. Typically, your route will be defined by customer zone (from cust master), shipping point zone (from shipping point definition configuration), and shipping conditions (customer master). Route will be used during delivery creation to schedule the delivery. Logically, the total duration between Material Availability date to Delivery date of the delivery (picking/packing/load/transit) should be something close to the planned delivery time in the Material Master, in order to maintain consistency throughout the entire planning and execution process.
Don't forget to maintain your STO Purchase req stuff IMG>MM>Purch>PurReq>Set up Stock Transport Requisition.
Rgds,
DB49

Intra Stock Transport Order -- Route Determinatation

Hi Guys:
In the Shipping Data TAB of a Stock Transport order I have a shipping condition.
When I change the Shipping condition , Route Determination Not getting changed.
what settings might have missed which is not triggering the change in shipping condition reflecting in Route Determination?
Thanks
Sweth

have a look into OSS Note 498143 - FAQ: Stock transfer with delivery in purchasing
among many other important info, it explains:
In the R/3 standard release, the system does not determine the route again if the shipping data is changed. Only a check is carried out. This is because SAP provides a more flexible solution with the "ME_PROCESS_PO_CUST" BAdI.
Customers can adjust the shipping data individually to meet their requirements in the PROCESS_ITEM method.

Stock transport order problem

hai guys
<b>Requirement:</b> Supplying plant good issued valuation type should be automatically updated in the receiving plant while posting goods receipt.
1.Stock transport order created in receiving plant with valuation type V1.
2.supplying plant posting goods issue With respect to the Stock transport order with valuation type V2.
3.But in the receiving plant it is showing valuation type V1 only.i want this should be automatically updated to Valuation type V2 from the supplying plant while posting goods receipt.
<b>NOTE:</b>both valuation type V1,V2 configured both in the Supplying and receiving plant.
How to resolve the above problem.

Use TCode MBSU to recive the material in receing plant against the suppling plant document
If u do goods recipt against STO it will pick up the data from sto only ie V1 and not V2
Reward if useful

Vendor determination for Intra company stock transport order

Team,
We need the vendor and the partner function to be determined for intra company stock transport order.
I have create Vendor and assigned the vendor to the plant code. When i create scheduling agreement with LU , the vendor filed is not getting updated as the agreement is with supplying plant.
Is there any possibility that the vendor code and the partner functions can be populated to the Intra company stock transport order.
Regards
Gobinthan G

Hi,
To plant, you have to assign customer. Create a cutsomer and assign it to the plant through following path.
SPRO-> Materials Management -> Purchasing -> Purchase order - > Setup stock transport order - > Define shipping data for plants.
Then you assign delivery type and checking rule as per following path.
SPRO-> Materials Management -> Purchasing -> Purchase order - > Setup stock transport order - > Assign delivery types and checking rules. Here you can create the assignment of po document type with delivery doc type and checking rule.
The last step is to maintain the all sales views of the material you tranfer, both of the receiving and sending plant.
Now you will get the tab 'shipping' in the purchase order item details section.
For intra company transaction as you said, in the vendor master, relevent customer code has to be updated. This will make suitable updation in sales process in line with your scheduling agreement / purchase order.
Thanks,
Hari.

Auto Batch Determination For Stock Transport Order/Replenishment Delivery

All,
I have an issue with my stock replenishment deliveries (STPO, Stock Transfer Plant to Plant via standard MRP/Procurement process with a Purchase Order that is a Stock Transport Order).
One question I have is what module should the configuration be for Auto Batch Determination on deliveries from STPO's, is it SD or MM? The reason I ask is because I have the SD side working just fine for example if I enter a customer order for this material and issue a delivery against it I get a batch automatically assigned according to your search/sort criteria. I know with a Stock Transport you have different item categories etc. and I have flagged them as relevant for ABD.
I have been racking my brain regarding this and I have went through the configuration for both Inventory Management and Sales and Distribution. I have went through the steps several times. I am not seeing what I am missing any help in this arena would be helpful I am getting the following error message when I go to the batch tab on the replenishment delivery "Batch determination is not possible because there is no search procedure". I am at a loss to what configuration is needed. I keep going through the steps and I am not finding whats missing. Any help in this area would be most grateful.
Thanks,
Jeremy

Hi Jeremy,
you need to configure batch determination in SD and maintain enteries in the trasaction code V/C5 as below
Sales org + Distribution channel + Division + DL (in salesDoc Ty) + Search procedure + tick check batch
Sales org + Distribution channel + Division + NL (in salesDoc Ty) + Search procedure + tick check batch
also check whether the delivery item category is active for auto. batch determination and maintain the batch condition record in transaction code VCH1
regards,
Santosh

Route determination problem in Stock transport order

Similar Messages

Maybe you are looking for