Route inside does not work on ASA 8.2(3), ASA cannot ping inside hosts

Hi Guys,
I have a problem on one our ASA seems to acting strange.
I have copy these routes below on ASA, and able to ping only 10.126.0.32.
route inside 10.126.0.10 255.225.255.255 10.20.3.1
route inside 10.126.0.30 255.225.255.255 10.20.3.1
route inside 10.126.0.31 255.225.255.255 10.20.3.1
route inside 10.126.0.32 255.225.255.255 10.20.3.1
route inside 10.126.0.140 255.225.255.255 10.20.3.1
route inside 10.126.0.141 255.225.255.255 10.20.3.1
route inside 10.126.0.142 255.225.255.255 10.20.3.1
When I saved the configuration and checking back on ASA running-configuration, none of above routes exists.
MYASA(config)# route inside 10.126.0.10 255.225.255.255 10.20.3.1
MYASA(config)# route inside 10.126.0.30 255.225.255.255 10.20.3.1
MYASA(config)# route inside 10.126.0.31 255.225.255.255 10.20.3.1
MYASA(config)# route inside 10.126.0.32 255.225.255.255 10.20.3.1
MYASA(config)# route inside 10.126.0.140 255.225.255.255 10.20.3.1
MYASA(config)# route inside 10.126.0.141 255.225.255.255 10.20.3.1
MYASA(config)# route inside 10.126.0.142 255.225.255.255 10.20.3.1
MYASA(config)# end
MYASA# show run | in route inside
route inside 10.0.0.0 255.0.0.0 10.20.3.1 1
route inside 10.96.0.0 255.224.0.0 10.20.3.1 1
route inside 10.96.0.10 255.225.255.255 10.20.3.1 1
route inside 10.96.0.30 255.225.255.255 10.20.3.1 1
route inside 10.96.0.31 255.225.255.255 10.20.3.1 1
route inside 10.96.0.32 255.225.255.255 10.20.3.1 1
route inside 10.96.0.140 255.225.255.255 10.20.3.1 1
route inside 10.96.0.141 255.225.255.255 10.20.3.1 1
route inside 10.96.0.142 255.225.255.255 10.20.3.1 1
route inside 10.100.1.61 255.255.255.255 10.20.3.1 1
route inside 10.101.20.112 255.255.255.255 10.0.0.254 1
route inside 10.101.20.113 255.255.255.255 10.0.0.254 1
route inside 10.101.20.114 255.255.255.255 10.0.0.254 1
route inside 10.101.20.115 255.255.255.255 10.0.0.254 1
route inside 10.101.20.201 255.255.255.255 10.0.0.254 1
route inside 10.101.20.202 255.255.255.255 10.0.0.254 1
route inside 10.101.20.204 255.255.255.255 10.0.0.254 1
route inside 10.101.20.205 255.255.255.255 10.0.0.254 1
route inside 10.101.22.22 255.255.255.255 10.20.3.1 1
route inside 10.101.24.100 255.255.255.255 10.0.0.254 1
route inside 10.101.24.101 255.255.255.255 10.0.0.254 1
route inside 10.101.25.0 255.255.255.0 10.20.3.1 1
route inside 10.126.0.32 255.255.255.255 10.20.3.1 1
route inside 67.215.65.132 255.255.255.255 10.20.3.1 1
route inside 192.168.1.3 255.255.255.255 10.0.0.254 1
route inside 192.168.1.4 255.255.255.255 10.0.0.254 1
route inside 192.168.151.0 255.255.255.0 10.20.3.1 1
route inside 192.168.151.48 255.255.255.240 10.0.0.254 1
route inside 205.210.235.0 255.255.255.0 10.0.0.254 1
route inside 205.210.236.0 255.255.255.0 10.20.3.1 1
route inside 205.210.237.0 255.255.255.0 10.0.0.254 1
route inside 205.210.238.0 255.255.255.0 10.0.0.254 1
route inside 205.210.239.0 255.255.255.0 10.0.0.254 1
route inside 205.210.240.0 255.255.255.0 10.0.0.254 1
route inside 205.210.241.0 255.255.255.0 10.0.0.254 1
MYASA#
It maybe a bug on the ASA?
Thanks
Rizwan Rafeek

Hi Vibhor,
Well, problem is resolved from Cisco Tech support, it boiled down a bug.
"route inside 10.126.0.32 255.225.255.255 10.20.3.1", this route already existed, and yet it only one route shows up out of 7 copied, that is a bug.
Thanks for your reply.
Regards
Rizwan Rafeek.

Similar Messages

You must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

I tried to answer in your other post.. please stick to one thread ..
What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default.

New router, printer does not work

A new wireless internet router and modem was installed yesterday. My printer does not respond from my MacBook Pro or my iPad. I followed all troubleshooting advice on HP and Apple websites. No luck. Apple support today suggested that my printer may need additional informatin which I cannot change. The Network ConfigurationCheck was perfect except for address changes and one other which may be significant. URLs for embedded web servers changed from http:/HP618550 to http://dhcppc2.
The Wireless Network Test Results were perfect. My computers acess the internet also without problems. Apple had me put a USB cable between the MacBook and the printer. Then the printer worked just fine. He thought (not being a printer guru) that perhaps the communication between the router and printer was the problem. Hence I come to this site. I have followed all HP site troubleshooting advice and met each criteria. HELP?

After reading this through again, I am wondering if the router is unable to support Bonjour properly. Bonjour is the discovery service through which your Mac finds your printer on your network.
Although not for your identical router, this article may be helpful: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02986958&cc=us&dlc=en&lc=en#N135
If we can't get this resolved a for-sure, kill-it-dead solution is to get a normal, standard router (Linksys or Netgear) and put it in line with your ZyXel, disabling its wireless. I can help if you want to go this way. A good standard router would be $40 and you would be done.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My belkin play max router software does not work with Lion

Does anyone know if there will be a fix with this? My imac is only 2 months old and my router is the same age. Since upgrading to lion I have frequent dropouts and no working self-healing program. I have changed channels with some succes but it's much less reliable than pre
Thanks

Here's their reply, so the software is not compatible with Lion and no fixes in vew:
Dear customer,
Thank you for contacting Belkin Technical Support.
I understand your concern and I would certainly be happy to help you.
I regret the Inconvenience caused,
Based on the Information provided, I am afraid to state that the Belkin software doesn't support MAC OS X Lion 10.7. As there are no drivers for it. We are aware of this issue. Our Engineers are working on it. We do not have any update about the new release for MAC OS X Lion 10.7. However, will keep you updated if there's any.
Should you have any further questions, please take a moment to review our Knowledge Base at http://belkin.com/support
Please ensure that in order to reply to this email, or access any attachments, you must follow the link shown above and click 'update' at the bottom of the email to be able to respond. Do not reply to [email protected] as we will not receive your email.
Thank you,
Mousin M D
Technical Support Agent
Belkin Technical Support.

I have 2nd gen Ipad which I recently updated to ios 6.1.2 and my auto cover lock does not work, so is the lock button, i cannot lock my ipad manually!!

I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
It got really annoying when I tried to use the lock button and it wont lock the sceen!! To test whether the button was allright, I did a long press and the message came if I wanted to shut down the ipad. So the button works fine, but I cannot use it to manually lock the ipad. Now the only way to lock the ipad is to wait for 2 mins (autolock) and still I cannot wake up the Ipad using the lock button. To do that I have to use the Home Screen button
Does any one else have similar issues and any solutions pls!! Cheers

HarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

WRT54G2 connects IM clients but browser does not work.

Hi,
I purchased this router last week and it had been working perfectly. All of a sudden today y lost my VPN connection and all that was connected was the msn and skype, nothing else works. None of the computers work either wired or wireless.
When i connect the PC directly to the cable modem works perfectly. When i connect the router back, does not work.... Any ideas??

Does the connection from router work without VPN...?
Does Modem work with VPN or without VPN...?
Make the connection (M-R-Comp) again and power cycle the complete network and check.

Microsof VX 3000 or 6000 Webcam does not work with Lync 2013 under Windows 8.1

Hi,
The problem is that i cannot use the Microsoft VX-3000 or VX-6000 with Lync 2013 under Windows 8.1.
If i go in settings under Video i can see the preview from the webcam just fine, so it works there no problem.
Wenn i try to enable my camera in a conference it does not work, i get an error: Your video cannot be started.
Now, there are no Windows 8.1 drivers for the Webcam so i installed the latest Windows 7 drivers. Because of that this webcam does not work with apps, that is fine i understand the driver problem and the way the new apps work.
But this Webcam works with skype under Windows 8.1 and it works with Lync 2010 client.
The same Webcam works just fine with Lync 2013 under Windows 7.
Is there anything i could do so that i get this Webcam to work with Lync 2013 desktop client under Windows 8.1?
Thanks

Hi,
According to your description, it may be caused by driver.
You can try to install the latest version of Display Driver to fix the display issue.
Since there is no driver for Windows 8.1, I suggest you wait for updating.
You can also post a case on Windows 8 forum, thank you for your understanding:
http://social.technet.microsoft.com/Forums/en-US/home?forum=W8ITProPreRel%2Cw81previtpro&filter=alltypes&sort=lastpostdesc
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

BLOB download from report region in translated application does not work

We created an application (APEX 3.1.2) with a base language dutch (300) and a translated application en-uk (3001). The problem is that in the translated application downloading BLOB's from a report region does not work and results in an error (page cannot be found).
The query source for the region is:
select naam
, dbms_lob.getlength(bestand)
, mimetype
from bos_documentatie
The column 'dbms_lob.getlength(filename)' is defined as a 'BLOB Download Format Mask' with the following setting:
DOWNLOAD:BOS_DOCUMENTATIE:BESTAND:NAAM::MIMETYPE:FILENAME:::attachment:Open
The URL's to the BLOB documents are different between the dutch and en-uk application:
dutch:
http://nldvnr01ux002:7792/pls/xvapexd/apex_util.get_blob?s=4260101889649158&a=300&c=12455124581749125&p=1001&k1=Application Multi Language.doc&k2=&ck=A24A5EA6903C5A9603B86D30F128F4DE&rt=CR
en-uk:
http://nldvnr01ux002:7792/pls/xvapexd/apex_util.get_blob?s=4260101889649158&a=300&c=12455124581749125.3001&p=1001&k1=Application Multi Language.doc&k2=&ck=7FF0C64FDD48A4D7A6892CFB2B6BCA57&rt=CR
As you can see the c parameter for the en-uk version has a '.3001' at the end, the internal ID of the translated application. I don't know if this can be the cause of the problem?

Hi Peter,
Thanks for the suggestion. However we have a lot of APEX applications build in that same APEX version (one development database) and upgrading now to a higher APEX version would mean we would have to re-test all our applications and upgrade all our test and production environments, just for this bug. And, maybe the higher APEX version may not solve our problem.
Thanks and regards,
Patrick

Satellite A110-228 LAN does not work after hibernate

Well, subject says it all, really. The LAN (wired) network does not work after hibernate.
It seems it cannot find the DHCP server, so after a while it gets a 169.* address.
After a reboot, the network functions as usual (gets a IP address from the DHCP server)
Tried the usual things, disconnecting the cable, disabling the LAN device, battery or AC adapter, the behavior is reproducible.
The wireless network will be restored after a hibernate.
It needs a little help though (right click on the icon and "recover" or whatever it is called in English)
Any suggestions?
Wilm Boerhout

Hi guys
In the Toshiba HW setup which is placed in the control panel the options Wake-up on LAN and Built-in LAN should be enabled.
I think the options are disabled by default.
Furthermore the default setting for Wake on Settings is OS controlled. To use the Wake-up on LAN function under power off mode, in the device driver for the network card under the menu point Wake On Settings the Value Wake on Magic & Directed must be set.
Please check this how to enable WOL (first time use):
1. Go to [Start] -> [Control Panel] -> [Toshiba HWSetup] -> [LAN] tab
2. Enable Wake-up on LAN
3. Click [Apply]. System will request to reboot.
4. After the reboot go to [Start] -> [Control Panel] -> select [System]
5. On system properties dialog box select [Hardware] tab -> click [Device manager]
6. On Device manager dialog box select [Networking adapters] -> double click [Intel(R) PRO/100 VE Network Connection]
7. Go to [Advanced] tab -> select [Wake On Settings] property -> Select [Wake on Magic & Directed]
8. Press [OK] to close the dialog box.

HT4995 My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken!

Subvi does not work properly when called inside a vi

Hello Every body
thanks for your help. i am using a sub vi for sine signal generation. as a vi it works fine. but when i called this subvi inside another VI it gives some problems. for example timer indicator works properly.it reinitializes as well in the sub vi, but in the main VI it does not work properly. means does not count the time.in the sub vi on the fly i can change the values of frequency and amplitude in real time, but when i use as sub vi, it does not reponse as i change the values in the control arrays.similarly pause and continue works properly in the sub vi, but once again in the main VI, it does not work properly.graph indicator also work properly in the sub vi. but here once again it does not work properly in the main VI.the pause resume indicator also does not blink, when it is continue. in the subvi it blinks very well.generally why the sub vi does not work properly inside the VI?i am sending my VI and sub vis.
any tips would be highly appreciated.
thanks
Regards
Attachments:
vi.zip ‏87 KB

I just want to add some more details to Dan's answer. The subVI is acting exactly like you've coded it. The mistake is in understanding how subVIs work. When you call a subVI (or a function in any other language), you pass some parameters to it, the subVI does it's thing and returns values. the subVI does not accept new parameters from the calling VI until it returns to the caller and the caller runs the subVI again. In your case, you have a subVI with a while loop. You have some front panel control wired to the subVI's stop terminal. When first called, the value is false. So the subVI will keep running until the subVI's stop button becomes true but you cannot change it from main until the subVI finishes and returns so the subVI will never stop. As Dan says, the solution is pass references of front panel controls to the subVI and have the subVI monitor those references for changes and to update references to indicators on Main. You subVI does not need any front panel controls or indicators of it's own.

EPrint does not work after new wifi router on Verizon DSL

I have been using ePrint on my iPod, iPad, and iPhone for a few months without a problem, but recently had to switch to a new wifi router on my Verizon DSL, as my wifi kept turning off and Verizon's solution was an updated wifi router. Since the switch, I cannot ePrint from my mobile devices. I can, after reconfiguration, print from my laptops. The ePrint app still finds the Deskjet 3050a, says "sending to printer", but will not print. The ePrint is turned on. I tried to delete the app and reinstall in hopes that I can start fresh, but it still does not work. I tried to add a new printer, with the email supplied on the ePrint screen on the printer, but nothing.
Any ideas?

Hi Honor Student
Is your printer connected to the new router as it sounds like it is still looking for the old one ? Maybe just disconnect it and reconnect it again to your new router and then the ePrint APP should pick it up.
I work for HP.
Thanks
Caroline
Although I am a HP employee, I am speaking for myself and not for HP.

TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
By the way, it might help if you indicated where you are located.
To complain to Apple use http://www.apple.com/feedback/ipad.html

Typeahead function in search field inside Facebook does not work in Firefox 13.0

Until 3 or 4 days ago, cool typeahead function inside search field inside Facebook always worked in Firefox. Now since 4 days ago, it does not work. But the typeahead function works inside search field inside Facebook on Internet Explorer BUT I prefer to use Firefox and do NOT want to switch to IE!!!
Is there anything I can do to regain that function?
Aharon

Shalom DJST,
Thank you for reply.
The behavior did not start with Firefox 13. I actually upgraded to Firefox 13 in hope it would solve the problem that happened in previous older versions. It failed to solve the problem.
It had been working for 3 years on Firefox until last or 2 weeks ago.
Regarding search, I mean by "type-ahead" which is that FB's search field offers a drop down list of possible search results as I type. For example, if I type S, it will show list of all people or groups with first letter S. If I type sk, it will show list of anything such as people or groups that starts with Sk, and so on. This is most valuable time saving technique to look for my pals to say hi or groups that I do not belong to but want to read their news or info.
I think it is Facebook's programming problem but if I ask them, they will point to Firefox's fault by saying that it works for my Internet Explorer but not for Firefox and I do not want to get involved into tug war between Facebook and Mozilla.
I am just bummed that the valuable time saving search method no longer exists on Firefox.
Regards,
Aharon

Link inside webpage does not work.

link inside webpage does not work ( http://ochre.lib.uchicago.edu/marathi/ ). i was able to launch a java program by clicking the link in the middle of the page in firefox 6. now it doesnt work in latest versions. link works fine in IE9

Anyone?.

Route inside does not work on ASA 8.2(3), ASA cannot ping inside hosts

Similar Messages

Maybe you are looking for