Route-List not using 2nd Route-Group when PRI cable is removed from H323 gw

CCM 4.1.3sr3b
Router - 2811 - 12.4.4T2
1 site with 2 gateways, gw1 and gw2
RL has both gateways as RG's.
If gw1 has its PRI cable removed, CCM RL will not pass call into gw2 - Not working.
If gw1 is turned of/Ethernet removed RL will wait the h323 timeout before passing call to gw2 - Working OK.
Is this how H323 works if the PRI is down ?
I know MGCP would work but is not an option.
I would have thought that the H323 gw1 would report that there are no resources available in the cause code and the CCM when then use the second choice in the RL.
Now, this is a service parameter "Stop Routing on User Busy Flag*" which is set to true, but this only relates to intercluster trunks.
I've tried playing with the few voice hunt command on the router with no luck.
Any advice or pointers.
Thanks

Yes, saw this next to the user busy flag, but the help says this about "Stop routing on unallocated number"
"This parameter determines routing behavior for intercluster trunk calls to an unalloc ted number. An unallocated number represents a dialed directory number that does not exist in a Cisco cluster. Valid values specify True or False. When the parameter is set to True and a call that is being routed to a remote Cisco cluster through a route list is released by a remote Cisco CallManager because of the unallocated number, a local Cisco CallManager will stop routing the call to a next device in the route list. When the parameter is set to False, the local Cisco CallManager will route the call to the next device."
Again, it talks about intercluster links, I will try on Monday.
Thanks

Similar Messages

  • How does one delete VPN configurations in the settings list not used any more?

    How does one delete VPN configurations in the settings list not used any more?

    Sorted found profiles and delete from there

  • I have the iPhone 4 recently became weak Wi-Fi where I can not use the Internet only when sitting Bejjani router, Can anyone help me in solving this problem please iPhone 4, iOS 7.0.3

    I have the iPhone 4 recently became weak Wi-Fi where I can not use the Internet only when sitting Bejjani router, Can anyone help me in solving this problem please
    iPhone 4, iOS 7.0.3

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • 2nd gen A TV I can hear but not see on the TV when trying to stream TV from the iPad2

    2nd Gen ATV I can hear but not see on the TV when trying to stream TV from the iPad2

    You can look at the ipad under settings, general, about and see if it's 4.3.3.
    Or when you connect the ipad to the computer with itunes, it'll tell you on the first tab if you need an update.

  • Screen Saver does not use selected Screen Saver when activated

    Screen Saver does not use selected Screen Saver when activated. After "Start screen saver" elapse time has been reached, a blank black full screen is displayed. I can activate the selected screen saver by using the hot corners function. Any help with this matter will be greatfully received.

    Hi again sassey,
    You're assuming correctly. Simply change the settings so that your screen saver activates before the sleep settings.
    Hope this solves your problem...

  • I replaced the original hdd in my early 2008 iMac.  I can't move my files that were backed up with Time Machine to my new hdd using Migration Assistant.  When prompted to select the "from drive", the ext. hhd does not appears as a selection. Please help!!

    I replaced the original hdd in my early 2008 iMac.  I can't move my files that were backed up with Time Machine to my new hdd using Migration Assistant.  When prompted to select the "from drive", the ext. hhd does not appears as a selection. Please help!!

    I'd recommend staring over, Pondini has created an excellent guide on how to use Setup Assistant. I'd recommend begin reading Pondini Setup Assistant tips where he talks about "Second Chance." Assuming your Time Machine backup is sound the restore  should be very smooth.
    Roger

  • Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......

    Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......can anyone help, please?!

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • It used to be that when I created a pdf from a word or publisher document, hyperlinks worked fine. Now I cannot get them to work unless the text displayed for the link is the complete address and it all appears on one line. Why?

    it used to be that when I created a pdf from a word or publisher document, hyperlinks worked fine. Now I cannot get them to work unless the text displayed for the link is the complete address and it all appears on one line. Why?

    You can print to the Adobe PDF printer, but that only creates links that Acrobat or Reader recognize as such. That is the reason for needing the entire URL on one line. It is not actually an embedded link, but one created by Acrobat on the fly. With OFFICE 2013 you have two choices: 1. create the PDF with the print to Adobe PDF and then add the links in Acrobat so that they are complete or 2. I think the WORD save as PDF or XPS will create the PDF with links, but not sure. If so, that would be the quickest solution for you, but be aware of potential problems with the MS plugin.
    Of course, the third option is to upgrade to XI which can be done with AA 9. You will probably not be eligible for a for an upgrade to whatever the next version will be.

  • I can not use the property of Touch ID to buy apps from Apple Store. !!!

    I can not use the property of Touch ID to buy apps from Apple Store. !!!
    Knowing that I have to activate the property of the settings, but they only work when you open the lock and does not work with me to buy the apps in Apple store !!
    And I'm sad and very upset by this  problem and I bought this phone in order to enjoy this feature and this experience But this did not happen !!  

    Hi I BOSS,
    If you are having issues using Touch ID to make purchases from the iTunes Store, you may find the Purchasing section of the following article helpful:
    iPhone 5s: Using Touch ID
    http://support.apple.com/kb/HT5883
    Regards,
    - Brenden

  • Why if i want to listen to music and i'am not using headphones i don't hear the music coming from the mac

    why if i want to listen to music and i'am not using headphones i don't hear the music coming from the mac?

    that means that your mac still thinks the headphones are plugged in.  Try inserting and unplugging the headphones from the jack several times and see if it sets the toggle switch back.  If not, try sticking a toothpick or something sturdy and narrow in and see if you can manually flip the toggle switch.  That method is a last resort, you do not want to break anything off inside the headphone jack.

  • [svn] 4233: When an FxComponent is removed from the stage and then re-added , we no longer reload the associated Skin unless it is absolutely necessary .

    Revision: 4233
    Author: [email protected]
    Date: 2008-12-04 12:15:28 -0800 (Thu, 04 Dec 2008)
    Log Message:
    When an FxComponent is removed from the stage and then re-added, we no longer reload the associated Skin unless it is absolutely necessary.
    Bug Notes: None
    QE Notes: None
    Doc Notes: None
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/baseClasses/FxComponent.as

    please let me know the linksys device model number you are using ..

  • [svn:fx-trunk] 10826: When a Video is removed from the stage or becomes invisible, the video will now pause playback.

    Revision: 10826
    Author:   [email protected]
    Date:     2009-10-02 10:28:43 -0700 (Fri, 02 Oct 2009)
    Log Message:
    When a Video is removed from the stage or becomes invisible, the video will now pause playback.  This features is controlled through a new property, playWhenHidden, which defaults to false (meaning we don't play the video when it's hidden).  When it becomes visible/on-stage again, we will start playing the video if autoPlay=true.  Otherwise, the video will not automatically start playback.
    This property still needs to be reviewed by PARB.
    Also, updating a comment in SkinnableContainer relating to a FIXME I own.
    QE notes: -
    Doc notes: -
    Bugs: SDK-21928
    Reviewer: Deepa
    Tests run: checkintests, mustella VideoElement/VideoPlayer
    Is noteworthy for integration: Yes
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-21928
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/SkinnableContainer.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoPlayer.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/VideoElement.as

    Is this the same trouble you are having?
    http://discussions.apple.com/thread.jspa?threadID=826805&tstart=0
    DP G5 2GHz    

  • I have a large number of contacts in my Outlook account.  As long as that account is active on the iPhone (6 ) the contact are available on the phone but disappear when that account is removed from the phone.  How do I transfer the contacts?

    I have a large number of contacts in my Outlook account.  As long as that account is active on the iPhone (6 ) the contact are available on the phone but disappear when that account is removed from the phone.  How do I transfer the contacts permanently to the phone?

    Archive the contacts you have in Address book, then delete them, they will be removed from iCloud as well. Restore the archive

  • SQ01 help for listing not used problem codegroup and code in notifications

    Hi ,
    I am making a query through SQ01 to find out how many damage codes created for a particular notification type are not being used .
    In infoset I used QMEL which lists problem code group and problem code  and as a bonus we also get codegroup text . When I test this query , I get damage code group and code used in all the notifications . I want solution for the following
    1)How to list only distinct damage codegroup and damage code (Not per notification wise)
    2)Which second table I have to use to get problem code short text
    3)Which table I have to add in infoset and how join has to be created so that I get list of  Damage codegroups and codes not used in notification .
    NPB

    Hi Pete ,
    1)How to list only distinct damage codegroup and damage code (Not per notification wise)
            I have output like
                      problem code group     Problem code grp text        Problem code    Problem code text
                      MRTR                           Transformer  problems        1                        I need table here
                      MRTR                            Transformer Problem           1
                      MRTR                            Transformer problem         2
    I need distinct output like
      problem code group     Problem code grp text        Problem code    Problem code text
                      MRTR                           Transformer  problems        1                        I need table here
                      MRTR                            Transformer problem         2
    2)Which second table I have to use to get problem code short text
                    I need  problem code table
    3)Which  problem code group and code not used
                Suppose for notification type X I have configured damage catalog Q  and Q has MRTR , MRAM , MRGT as code groups and each of them have their own codes (say 1 to 5)...If notifications are created only for MRTR and code 1 , 5
    I need not used output like
    MRTR 2
    MRTR 3
    MRTR 4
    MRAM *
    MRCT *
    How can I achieve this using  sq01,02 etc
    NPB
    Edited by: Narasimha Bhat on Feb 1, 2011 4:54 PM

  • "Do Not use setup Cartridges" message when setting up Officejet Pro 8600

    Just trying to set up a new Officejet Pro 8600 and installed the catridges that were in the box but I just get a message on th ediplay that says  "Do not use setup cartridges - Y" and I can't get any further. I've taken them all out and put them back in to no avail.
    Can't find any referenct to this error message on HP or google...HELP!!!
    This question was solved.
    View Solution.

    Hi GraGra,
    Thank you for the update. Glad to hear the issue has been resolved. Have a wonderful day.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

Maybe you are looking for