Route remain in the routing table after disconnect vpn client
I have configured a 2811 with pppoe and fix ip address with adsl, the use it as easy vpn server and another 2811 configured as easy vpn client also use pppoe connect to random ip address adsl.
I just want to ask that why the route is remained after i disconnect remote easy vpn.
I am facing the same issue for my easy vpn server and clients.
My Cisco 3825 has an easy vpn server configuration with an ip pool. When one of the client disconnects and his isakmp sa deleted by router itself. The route pointing to the ip pool's ip address is still in routing table!!! This time another vpn client connects and get the same ip pool's ip address. But, this new connected vpn client is located on another interface of the router. So, an extreme problem occur! A route pointing to 2 next hops is created! So bad!
Can another help me? How can I delete the bad route?
Thanks!
Jason Lam
Similar Messages
-
Does the IPAD come with a VPN client?, Does the IPAD come with a VPN client?
Does the IPAD come with a VPN client build into IOS? If not where can I find one. I need to configure a PPTP VPN account?
Many Thanks
GrahamHow to Setup PPTP VPN on ipad
Tap Settings > General > Network > VPN > Add VPN Configuration. Then use the VPN settings for your device.
Open the Settings application
Click on General
Click on Network
Click on VPN
Click on Add VPN Configuration
Select PPTP
In the Description field, enter vpntraffic
In the Server field, enter your supplied server (for example: thailand vpn)
In the Account field, enter your supplied username
In the Password field, enter your supplied password
Ensure that Send All Traffic is set to ON
Ensure that Encryption is set to Auto
Click Save
Press the Home button
Open the Settings application
Click on VPN
Click on vpntraffic
Set VPN to ON -
EEM Script to stop SIP service if a network route disappears from the routing table
Trying to run this on an ASR 1001-x with 3.13 code. It seemed to behave properly in the lab, but not on customer's router:
event manager applet WebEx_DOWN
event routing network 62.109.194.64/26 type remove
action 1.0 syslog msg "WebEx Route Lost - Disabling CUBE Service"
action 2.0 cli command "enable"
action 3.0 cli command "config t"
action 4.0 cli command "voice service voip"
action 5.0 cli command "sip"
action 6.0 cli command "call service stop"
action 7.0 cli command "end"
event manager applet WebEx_UP
event routing network 62.109.194.64/26 type add
action 1.0 syslog msg "WebEx Route Added - Enabling CUBE Service"
action 2.0 cli command "enable"
action 3.0 cli command "config t"
action 4.0 cli command "voice service voip"
action 5.0 cli command "sip"
action 6.0 cli command "no call service stop"
action 7.0 cli command "end"
When the route disappeared, there was a line in the syslog "WebEx Route Lost - Disabling CUBE Service", but the service was not stopped. I had to stop it myself. I then let it sit. Once the route reappeared, the message "WebEx Route Added - Enabling CUBE Service" showed up, but SIP did not start. Any ideas?If you have AAA command authz enabled, then make sure you've configured "event manager session cli username USER", where USER is a name authorized to run all of the CLI commands in your applets.
If you still don't see the behavior you want, enable "debug event manager action cli" to see what the results of the CLI commands are. -
Can not find the the RBS tables after installing the Remote Blog Storage
Hi,
I am trying to configure the Remote Blob storage on my Sharepoint Server 2013. I am using the SQL Server Express 10.50.6000.
Everything is going fine, but I can not find the tables in the Database.
I am not sure where I did the wrong thing.
machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
but the installation is looking for some other.
Thanks in advance.
=== Verbose logging started: 3/23/2015 13:55:09 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\Windows\system32\msiexec.exe ===
MSI (c) (44:F8) [13:55:09:000]: Resetting cached policy values
MSI (c) (44:F8) [13:55:09:000]: Machine policy value 'Debug' is 0
MSI (c) (44:F8) [13:55:09:000]: ******* RunEngine:
******* Product: RBS.msi
******* Action:
******* CommandLine: **********
MSI (c) (44:F8) [13:55:09:000]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (44:F8) [13:55:09:000]: Grabbed execution mutex.
MSI (c) (44:F8) [13:55:09:016]: Cloaking enabled.
MSI (c) (44:F8) [13:55:09:016]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (44:F8) [13:55:09:016]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (90:A4) [13:55:09:016]: Running installation inside multi-package transaction D:\RBS.msi
MSI (s) (90:A4) [13:55:09:016]: Grabbed execution mutex.
MSI (s) (90:34) [13:55:09:016]: Resetting cached policy values
MSI (s) (90:34) [13:55:09:016]: Machine policy value 'Debug' is 0
MSI (s) (90:34) [13:55:09:016]: ******* RunEngine:
******* Product: D:\RBS.msi
******* Action:
******* CommandLine: **********
MSI (s) (90:34) [13:55:09:031]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (90:34) [13:55:09:031]: Setting cached product context: User non-assigned for product: FB42F99F09B0E3646985F32DFE3C9C29
MSI (s) (90:34) [13:55:09:031]: Using cached product context: User non-assigned for product: FB42F99F09B0E3646985F32DFE3C9C29
MSI (s) (90:34) [13:55:09:031]: Setting cached product context: machine assigned for product: 000021599B0090400100000000F01FEC
115C834F46A5E33479CEE53534AD76A0
:34) [13:55:09:265]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:265]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (s) (90:34) [13:55:09:265]: Enabling baseline caching for this transaction since all active patches are MSI 3.0 style MSPs or at least one MSI 3.0 minor update patch is active
MSI (s) (90:34) [13:55:09:265]: APPCOMPAT: looking for appcompat database entry with ProductCode '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'.
MSI (s) (90:34) [13:55:09:265]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (90:34) [13:55:09:265]: Transforms are not secure.
MSI (s) (90:34) [13:55:09:265]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'D:\rbs_install_log.txt'.
MSI (s) (90:34) [13:55:09:265]: Command Line: TRUSTSERVERCERTIFICATE=true FILEGROUP=PRIMARY DBNAME=WSS_Content DBINSTANCE=jpntkyint01\sharepoint FILESTREAMFILEGROUP=RBSFilestreamProvider FILESTREAMSTORENAME=FilestreamProvider_1 CURRENTDIRECTORY=D:\ CLIENTUILEVEL=3 CLIENTPROCESSID=14660
MSI (s) (90:34) [13:55:09:265]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{1AC68E73-94F1-4A01-B229-82B2F73C3326}'.
MSI (s) (90:34) [13:55:09:265]: Product Code passed to Engine.Initialize: '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'
MSI (s) (90:34) [13:55:09:265]: Product Code from property table before transforms: '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'
MSI (s) (90:34) [13:55:09:265]: Product Code from property table after transforms: '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'
MSI (s) (90:34) [13:55:09:265]: Product registered: entering maintenance mode
MSI (s) (90:34) [13:55:09:265]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:265]: Determined that existing product (either this product or the product being upgraded with a patch) is installed per-machine.
MSI (s) (90:34) [13:55:09:265]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:265]: Product {56D21E05-679B-40F2-94C1-DB0D7EB2E461} is admin assigned: LocalSystem owns the publish key.
MSI (s) (90:34) [13:55:09:265]: Product {56D21E05-679B-40F2-94C1-DB0D7EB2E461} is managed.
MSI (s) (90:34) [13:55:09:265]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: MSI_LUA: Credential prompt not required, user is an admin
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding ProductState property. Its value is '5'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding ProductToBeRegistered property. Its value is '1'.
MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
MSI (s) (90:34) [13:55:09:281]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: Specifed source is already in a list.
MSI (s) (90:34) [13:55:09:281]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (90:34) [13:55:09:281]: Machine policy value 'DisableBrowse' is 0
MSI (s) (90:34) [13:55:09:281]: Machine policy value 'AllowLockdownBrowse' is 0
MSI (s) (90:34) [13:55:09:281]: Adding new sources is allowed.
MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: Package name retrieved from configuration data: 'RBS.msi'
MSI (s) (90:34) [13:55:09:281]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (s) (90:34) [13:55:09:281]: Machine policy value 'DisableMsi' is 1
MSI (s) (90:34) [13:55:09:281]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (90:34) [13:55:09:281]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (90:34) [13:55:09:281]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:281]: Product {56D21E05-679B-40F2-94C1-DB0D7EB2E461} is admin assigned: LocalSystem owns the publish key.
MSI (s) (90:34) [13:55:09:281]: Product {56D21E05-679B-40F2-94C1-DB0D7EB2E461} is managed.
MSI (s) (90:34) [13:55:09:281]: Running product '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}' with elevated privileges: Product is assigned.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding TRUSTSERVERCERTIFICATE property. Its value is 'true'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Modifying FILEGROUP property. Its current value is 'default'. Its new value: 'PRIMARY'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding DBNAME property. Its value is 'WSS_Content'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding DBINSTANCE property. Its value is 'jpntkyint01\sharepoint'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Modifying FILESTREAMFILEGROUP property. Its current value is 'default'. Its new value: 'RBSFilestreamProvider'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding FILESTREAMSTORENAME property. Its value is 'FilestreamProvider_1'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'D:\'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (90:34) [13:55:09:281]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '14660'.
MSI (s) (90:34) [13:55:09:281]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (90:34) [13:55:09:328]: PROPERTY CHANGE: Adding MsiRestartManagerSessionKey property. Its value is '489ffd242e95054781e9ce4b8d0b8aa5'.
MSI (s) (90:34) [13:55:09:328]: RESTART MANAGER: Session opened.
MSI (s) (90:34) [13:55:09:328]: TRANSFORMS property is now:
MSI (s) (90:34) [13:55:09:328]: PROPERTY CHANGE: Adding PRODUCTLANGUAGE property. Its value is '1033'.
MSI (s) (90:34) [13:55:09:328]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '300'.
MSI (s) (90:34) [13:55:09:328]: SHELL32::SHGetFolderPath returned: C:\Users\medsvradmin\AppData\Roaming
MSI (s) (90:34) [13:55:09:328]: SHELL32::SHGetFolderPath returned: C:\Users\medsvradmin\Favorites
Action ended 13:55:09: AppSearch. Return value 1.
Action start 13:55:09: ValidateProductID.
MSI (s) (90:34) [13:55:09:390]: Skipping action: Sqlmsirc_CheckLanguage_64 (condition is false)
MSI (s) (90:34) [13:55:09:390]: Doing action: CostInitialize
Action ended 13:55:09: ValidateProductID. Return value 1.
MSI (s) (90:34) [13:55:09:406]: Machine policy value 'MaxPatchCacheSize' is 10
MSI (s) (90:34) [13:55:09:406]: Baseline: Sorting baselines for {56D21E05-679B-40F2-94C1-DB0D7EB2E461}.
MSI (s) (90:34) [13:55:09:406]: Baseline: New baseline 10.50.1600 from transaction.
MSI (s) (90:34) [13:55:09:437]: Baseline: Sorted order Native: Order 0.
MSI (s) (90:34) [13:55:09:437]: Baseline Data Table:
MSI (s) (90:34) [13:55:09:437]: ProductCode: {56D21E05-679B-40F2-94C1-DB0D7EB2E461} Version: 10.50.1600 Attributes: 0 PatchId: Native BaselineId: -2147483648 Order: 0
MSI (s) (90:34) [13:55:09:437]: Baseline File Table:
MSI (s) (90:34) [13:55:09:437]: PROPERTY CHANGE: Adding ROOTDRIVE property. Its value is 'D:\'.
MSI (s) (90:34) [13:55:09:437]: PROPERTY CHANGE: Adding CostingComplete property. Its value is '0'.
MSI (s) (90:34) [13:55:09:453]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: Patch
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: MsiPatchHeaders
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: __MsiPatchFileList
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2228 2: 3: PatchPackage 4: SELECT `DiskId`, `PatchId`, `LastSequence` FROM `Media`, `PatchPackage` WHERE `Media`.`DiskId`=`PatchPackage`.`Media_` ORDER BY `DiskId`
MSI (s) (90:34) [13:55:09:453]: Delta compression fallback method for this product transaction is 'MSI 2.0 legacy obsolescence'
MSI (s) (90:34) [13:55:09:453]: Note: 1: 2205 2: 3: Patch
Action start 13:55:09: CostInitialize.
MSI (s) (90:34) [13:55:09:453]: Doing action: FileCost
Action ended 13:55:09: CostInitialize. Return value 1.
MSI (s) (90:34) [13:55:09:468]: Note: 1: 2205 2: 3: Class
MSI (s) (90:34) [13:55:09:468]: Note: 1: 2205 2: 3: Extension
MSI (s) (90:34) [13:55:09:468]: Note: 1: 2205 2: 3: TypeLib
Action start 13:55:09: FileCost.
MSI (s) (90:34) [13:55:09:468]: Doing action: IsolateComponents
Action ended 13:55:09: FileCost. Return value 1.
Action start 13:55:09: IsolateComponents.
MSI (s) (90:34) [13:55:09:468]: Doing action: CostFinalize
GE: Adding ClientDir1025 property. Its value is 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\ar\'.
MSI (s) (90:34) [13:55:09:593]: PROPERTY CHANGE: Modifying ServerDir property. Its current value is 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Server'. Its new value: 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Server\'.
MSI (s) (90:34) [13:55:09:593]: PROPERTY CHANGE: Modifying Eula1033 property. Its current value is 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\1033'. Its new value: 'C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\1033\'.
MSI (s) (90:34) [13:55:09:593]: Target path resolution complete. Dumping Directory table...
MSI (s) (90:34) [13:55:09:593]: Note: target paths subject to change (via custom actions or browsing)
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: TARGETDIR , Object: D:\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: WindowsFolder , Object: C:\Windows\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ProgramFiles64Folder , Object: C:\Program Files\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: INSTALLDIR , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: GAC , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ClientDir , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ClientDir3082 , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\es\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ClientDir1025 , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\ar\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: ServerDir , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Server\
MSI (s) (90:34) [13:55:09:593]: Dir (target): Key: Eula1033 , Object: C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\1033\
MSI (s) (90:34) [13:55:09:593]: Doing action: IsDotNet20Or40Installed
Action ended 13:55:09: CostFinalize. Return value 1.
MSI (s) (90:34) [13:55:09:593]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'IsDotNet20Or40Installed'
MSI (s) (90:34) [13:55:09:609]: Creating MSIHANDLE (1) of type 790542 for thread 9268
MSI (s) (90:6C) [13:55:09:609]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIB261.tmp, Entrypoint: IsDotNetFramework20Or40Installed
MSI (s) (90:FC) [13:55:09:609]: Generating random cookie.
MSI (s) (90:FC) [13:55:09:609]: Created Custom Action Server with PID 14944 (0x3A60).
MSI (s) (90:D0) [13:55:09:640]: Running as a service.
MSI (s) (90:D0) [13:55:09:640]: Hello, I'm your 64bit Impersonated custom action server.
MSI (s) (90!08) [13:55:09:640]: PROPERTY CHANGE: Adding DOTNETCOREPATH property. Its value is '1'.
MSI (s) (90!08) [13:55:09:640]: PROPERTY CHANGE: Adding IsDotNet20Or40Installed property. Its value is '1'.
MSI (s) (90:6C) [13:55:09:640]: Closing MSIHANDLE (1) of type 790542 for thread 9268
One or more .NET Framework assemblies found in MsiAssembly table require the GAC, need to check for the .NET Framework
MSI (s) (90:34) [13:55:09:640]: Skipping action: CA_ErrorPrereqDotNet20Or40 (condition is false)
MSI (s) (90:34) [13:55:09:640]: Doing action: SqlFollowComponentsValidate_Redist_64
Action ended 13:55:09: IsDotNet20Or40Installed. Return value 1.
MSI (s) (90:34) [13:55:09:640]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SqlFollowComponentsValidate_Redist_64'
MSI (s) (90:34) [13:55:09:687]: Creating MSIHANDLE (11) of type 790542 for thread 9268
MSI (s) (90:04) [13:55:09:687]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIB281.tmp, Entrypoint: SqlFollowComponentsValidate
Action start 13:55:10: InstallServices.
MSI (s) (90:34) [13:55:10:498]: Doing action: StartServices
Action ended 13:55:10: InstallServices. Return value 1.
MSI (s) (90:34) [13:55:10:498]: Note: 1: 2205 2: 3: ServiceControl
MSI (s) (90:34) [13:55:10:498]: Note: 1: 2228 2: 3: ServiceControl 4: SELECT `Name`,`Wait`,`Arguments`,`Event`, `Action` FROM `ServiceControl`, `Component` WHERE `Component_` = `Component` AND (`Action` = 0 OR `Action` = 1 OR `Action` = 2)
Action start 13:55:10: StartServices.
MSI (s) (90:34) [13:55:10:498]: Doing action: RegisterUser
Action ended 13:55:10: StartServices. Return value 1.
Action start 13:55:10: RegisterUser.
MSI (s) (90:34) [13:55:10:498]: Doing action: RegisterProduct
Action ended 13:55:10: RegisterUser. Return value 0.
MSI (s) (90:34) [13:55:10:498]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:10:498]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
Action start 13:55:10: RegisterProduct.
MSI (s) (90:34) [13:55:10:498]: Doing action: PublishComponents
Action ended 13:55:10: RegisterProduct. Return value 1.
MSI (s) (90:34) [13:55:10:498]: Note: 1: 2205 2: 3: PublishComponent
MSI (s) (90:34) [13:55:10:498]: Note: 1: 2228 2: 3: PublishComponent 4: SELECT `PublishComponent`.`ComponentId`, `PublishComponent`.`Qualifier`, `PublishComponent`.`AppData`, `Feature`, `Component`.`ComponentId`, `Component`.`RuntimeFlags` FROM `PublishComponent`, `Component`, `Feature` WHERE `PublishComponent`.`Component_` = `Component`.`Component` AND `PublishComponent`.`Feature_` = `Feature`.`Feature` AND ((`Feature`.`Action` = 1 OR `Feature`.`Action` = 2) OR (`Feature`.`Action` = 4 AND `Feature`.`Installed` = 0) OR (`Feature`.`Action` = 3 AND (`Feature`.`Installed` = 1 OR `Feature`.`Installed` = 2 OR `Feature`.`Installed` = 4)))
Action start 13:55:10: PublishComponents.
MSI (s) (90:34) [13:55:10:498]: Doing action: MsiPublishAssemblies
Action ended 13:55:10: PublishComponents. Return value 0.
Action start 13:55:10: MsiPublishAssemblies.
MSI (s) (90:34) [13:55:10:498]: Doing action: PublishFeatures
Action ended 13:55:10: MsiPublishAssemblies. Return value 1.
MSI (s) (90:34) [13:55:10:498]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:10:498]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
Action start 13:55:10: PublishFeatures.
MSI (s) (90:34) [13:55:10:498]: Doing action: PublishProduct
Action ended 13:55:10: PublishFeatures. Return value 1.
MSI (s) (90:34) [13:55:10:513]: Resolving source to launched-from source.
MSI (s) (90:34) [13:55:10:513]: Setting launched-from source as last-used.
MSI (s) (90:34) [13:55:10:513]: PROPERTY CHANGE: Adding SourceDir property. Its value is 'D:\'.
MSI (s) (90:34) [13:55:10:513]: PROPERTY CHANGE: Adding SOURCEDIR property. Its value is 'D:\'.
MSI (s) (90:34) [13:55:10:513]: PROPERTY CHANGE: Adding SourcedirProduct property. Its value is '{56D21E05-679B-40F2-94C1-DB0D7EB2E461}'.
MSI (s) (90:34) [13:55:10:513]: SOURCEDIR ==> D:\
MSI (s) (90:34) [13:55:10:513]: SOURCEDIR product ==> {56D21E05-679B-40F2-94C1-DB0D7EB2E461}
MSI (s) (90:34) [13:55:10:529]: SECREPAIR: CryptAcquireContext succeeded
MSI (s) (90:34) [13:55:10:529]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:10:529]: Determining source type
MSI (s) (90:34) [13:55:10:529]: Source type from package 'RBS.msi': 2
MSI (s) (90:34) [13:55:10:529]: SECREPAIR: Hash Database: C:\Windows\Installer\SourceHash{56D21E05-679B-40F2-94C1-DB0D7EB2E461}
MSI (s) (90:34) [13:55:10:623]: SECREPAIR: Hash Value for the file:RBS.msi matched
MSI (s) (90:34) [13:55:10:623]: Source path resolution complete. Dumping Directory table...
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: TARGETDIR , Object: D:\ , LongSubPath: , ShortSubPath:
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: WindowsFolder , Object: D:\ , LongSubPath: , ShortSubPath:
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: ProgramFiles64Folder , Object: D:\ , LongSubPath: Program Files\ , ShortSubPath: PFiles\
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: INSTALLDIR , Object: D:\ , LongSubPath: Program Files\Microsoft SQL Remote Blob Storage 10.50\ , ShortSubPath: PFiles\jfw2d1_t\
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: Eula3082 , Object: D:\ , LongSubPath: Program Files\Microsoft SQL
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: DocsDir , Object: D:\ , LongSubPath: Program Files\Microsoft SQL Remote Blob Storage 10.50\Documentation\ , ShortSubPath: PFiles\jfw2d1_t\gsutoqfr\
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: MaintainerDir , Object: D:\ , LongSubPath: Program Files\Microsoft SQL Remote Blob Storage 10.50\Maintainer\ , ShortSubPath: PFiles\jfw2d1_t\jygjogya\
Files\jfw2d1_t\g-pfawke\pt-PT\
MSI (s) (90:34) [13:55:10:623]: Dir (source): Key: ClientDir2052 , Object: D:\ , LongSubPath: Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\zh-CHS\ , ShortSubPath: PFiles\jfw2d1_t\g-pfawke\zh-CHS\
Action ended 13:55:10: PublishProduct. Return value 1.
MSI (s) (90:34) [13:55:10:638]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:10:638]: Using cached product context: machine assigned for product: 50E12D65B9762F04491CBDD0E72B4E16
MSI (s) (90:34) [13:55:10:638]: Note: 1: 2205 2: 3: Shortcut
MSI (s) (90:34) [13:55:10:638]: Note: 1: 2228 2: 3: Shortcut 4: SELECT `Shortcut`,`Name`, `FileName`, `Component`.`Directory_`, `Arguments`, `WkDir`, `Icon_`, `IconIndex`, `Hotkey`, `ShowCmd`, `Shortcut`.`Description`, `Shortcut`.`Directory_`, `Component`.`RuntimeFlags`, `Component`.`Action`, `Target`, `ComponentId`, `Feature`.`Action`, `Component`.`Installed`, `DisplayResourceDLL`, `DisplayResourceId`, `DescriptionResourceDLL`, `DescriptionResourceId` From `Shortcut`, `Feature`, `Component`, `File` WHERE `Target` = `Feature` AND `Shortcut`.`Component_` = `Component` AND `Component`.`KeyPath` = `File`.`File` AND ((`Feature`.`Action` = 1 OR `Feature`.`Action` = 2) OR (`Feature`.`Action` = 4 AND `Feature`.`Installed` = 0) OR (`Feature`.`Action` = 3 AND (`Feature`.`Installed` = 1 OR `Feature`.`Installed` = 2 OR `Feature`.`Installed` = 4)) OR (`Feature`.`Action` = NULL AND (`Component`.`Action` = 1 OR `Component`.`Action` = 2) AND (`Feature`.`Installed` = 1 OR `Feature`.`Installed` = 2 OR `Feature`.`Installed` = 4)))
Action start 13:55:10: CreateShortcuts.
MSI (s) (90:34) [13:55:10:638]: Doing action: FixCounters
Action ended 13:55:10: CreateShortcuts. Return value 0.
MSI (s) (90:34) [13:55:10:638]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'FixCounters'
Return value 0.
Action ended 13:55:20: INSTALL. Return value 1.
Property(S): DiskPrompt = [1]
Property(S): InstallMode = Typical
Property(S): DOTNET20SP = #2
Property(S): DOTNET35SP = #1
Property(S): DBINSTANCEREGISTRY = SHAREPOINT
Property(S): DBNAMEREGISTRY = WSS_Content
Property(S): FILESTREAMSTORENAMEREGISTRY = FilestreamProvider_1
Property(S): SCHEMASUFFIXREGISTRY = <suffix>
Property(S): WelcomeBmp = WelcomeBmp
Property(S): TRUSTSERVERCERTIFICATE = true
Property(S): SCHEDULEMAINTAINERTASK = 1
Property(S): MAINTAINERGC = GarbageCollection
Property(S): MAINTAINERREFSCAN = r
Property(S): MAINTAINERDELETE = d
Property(S): MAINTAINERORPHAN = o
Property(S): MAINTAINERCONSISTENCY = ConsistencyCheck
Property(S): MAINTAINERCONSISTENCYREPAIR = true
Property(S): OPENREADME = 1
Property(S): FilestreamPoolTranLifetimeUnit = time
Property(S): TEXTFILEVALUE = 0
Property(S): CONSOLEVALUE = 0
Property(S): DBTABLEVALUE = 0
Property(S): EVENTLOGVALUE = 4
Property(S): DBINSTANCE = jpntkyint01\sharepoint
Property(S): DBNAME = WSS_Content
Property(S): FILEGROUP = PRIMARY
Property(S): INTEGRATEDSECURITY = 1
Property(S): DBUSERNAME = username
Property(S): DBPASSWORD = **********
Property(S): FSDBINSTANCE = jpntkyint01\sharepoint
Property(S): FSDBNAME = WSS_Content
Property(S): FILESTREAMMETADATAFILEGROUP = PRIMARY
Property(S): FILESTREAMFILEGROUP = RBSFilestreamProvider
Property(S): FILESTREAMSTORENAME = FilestreamProvider_1
Property(S): SCHEMASUFFIX = <suffix>
Property(S): FILESTREAMTRANPOOLSIZE = 5
Property(S): FilestreamPoolTranLifetimeTime = 00:01:00
Property(S): FilestreamPoolTranLifetimeDays = 01
Property(S): FILESTREAMMAXPOOLSIZE = 200000
Property(S): FILESTREAMMAXSIZEINBANDWRITE = 1258290
Property(S): FILESTREAMMAXSIZEINBANDREAD = 1258290
Property(S): FILESTREAMMAXSIZEINLINEBLOB = 61140
Property(S): FILESTREAMWRITEALLOCATIONSIZE = 0
Property(S): MAINTAINERDURATION = 120
Property(S): SQLServerText1 = 0
Property(S): SQLServerVersionText3 = 0
Property(S): _IsMaintenance2 = Modify
Property(S): ModifyIcon = ModifyIco
Property(S): RepairIcon = RepairIco
Property(S): RemoveIcon = RemoveIco
Property(S): ErrorIcon = ErrorIco
Property(S): TARGETDIR = D:\
Property(S): USERNAME = Windows User
Property(S): _IsMaintenance = Reinstall
Property(S): AgreeToLicense = No
Property(S): Interrupted = 0
Property(S): SetupIcon = SetupIco
Property(S): Installed = 00:00:00
Property(S): CreateFilesNoUI = C:\Windows\system32\;D:\RBS.msi
Property(S): FixLogConfig = 4;0;0;0;0
Property(S): FixRemoteFilestreamStoreConfig = remotefilestream;C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Provider Libraries\Filestream Provider\RemoteFilestreamProviderConfiguration.xml
Property(S): FixFilestreamStoreConfig = filestream;C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Provider Libraries\Filestream Provider\FilestreamProviderConfiguration.xml
Property(S): RegisterProviderFile = RegisterFilestreamProvider.sql
Property(S): FILESTREAMTRANPOOLTRANLIFETIME = time 00:01:00
Property(S): IsDotNet20Or40Installed = 1
Property(S): ProgramMenuFolder.Sql = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): SAPBINOTEPAD = Notepad.exe
Property(S): MaintainerDir1025 = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Maintainer\ar\
Property(S): ClientDir3082 = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Client Library\es\
Property(S): FilestreamDir1025 = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Provider Libraries\Filestream Provider\ar\
Property(S): ProviderDir = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\Provider Libraries\
Property(S): Eula3082 = C:\Program Files\Microsoft SQL Remote Blob Storage 10.50\3082\
Property(S): ProgramFiles64Folder = C:\Program Files\
Property(S): SourceDir = D:\
Property(S): VersionNT = 601
Property(S): Privileged = 1
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductCode = {56D21E05-679B-40F2-94C1-DB0D7EB2E461}
Property(S): ProductLanguage = 1033
Property(S): ProductName = SQL Server 2008 R2 Remote Blob Store
Property(S): ProductVersion = 10.50.1600.1
Property(S): UpgradeCode = {BA2FF55A-725F-40E5-956E-D08AD0B8175B}
Property(S): ProductShortName = Remote Blob Store
Property(S): PlatformExtension = _64
Property(S): PlatformId = x64
Property(S): AppGuidRegKey = Redist_Uninstall_RegKey
Property(S): ARPPRODUCTICON = ARPIco
Property(S): ARPHELPLINK = http://www.microsoft.com/sqlserver
Property(S): PIDTemplate = 53934<````=````=````=````=`````>@@@@@
Property(S): PROMPTROLLBACKCOST = P
Property(S): INSTALLLEVEL = 100
Property(S): ALLUSERS = 1
Property(S): SuccessIcon = SuccessIco
Property(S): WarningIcon = WarningIco
Property(S): LicenseIcon = LicenseIco
Property(S): CompleteIcon = CompleteIco
Property(S): CustomIcon = CustomIco
Property(S): NewIcon = NewIco
Property(S): UpIcon = UpIco
Property(S): DialogBanner = BannerBmp
Property(S): Details = 0
Property(S): ReinstallModeText = omus
Property(S): Display_IsBitmapDlg = 1
Property(S): ProductID = none
Property(S): ISENABLEDWUSFINISHDIALOG = 1
Property(S): SQLServerVersionText1 = 0
Property(S): SQLServerVersionText2 = 0
Property(S): CA_ERRORCOUNT = 0
Property(S): CA_WARNINGCOUNT = 0
Property(S): CA_SUCCESSCOUNT = 0
Property(S): UI_SHOWCOPYRIGHT = yes
Property(S): ShowUserRegistrationDlg = 1
Property(S): ButtonTextStyle = {\ButtonTextStyle}
Property(S): DlgTextStyle = {\DlgTextStyle}
Property(S): DlgTextStyleB = {\DlgTextStyleB}
Property(S): DlgTitleStyle = {\DlgTitleStyle}
Property(S): DlgTitleStyleB = {\DlgTitleStyleB}
Property(S): FixedStyle = {\FixedStyle}
Property(S): Error_UninstallDependant = 1
Property(S): DefaultUIFont = Tahoma8
Property(S): ProductFeaturesDefined = 1
Property(S): RBSRegistryKey = Software\Microsoft\Remote Blob Storage
Property(S): SCHEMASUFFIXVALID = 0
Property(S): EnableCustomConfigDlg = 1
Property(S): EnableCustomRemoveDlg = 1
Property(S): EnableDotNetCheck = 1
Property(S): FXAssemblyVersion = 2.0.0.0
Property(S): VSAssemblyVersion = 8.0.0.0
Property(S): EnableFeatureDlg = 1
Property(S): MaintenanceWelcomeDlg_Next = MaintenanceTypeDlg
Property(S): ReadyToRemoveDlg_Back = MaintenanceTypeDlg
Property(S): CustomerInfoDlg_Next = ReadyToInstallDlg
Property(S): CustomerInfoDlg_Back = LicenseAgreementDlg
Property(S): ReadyToInstallDlg_NotInstalled_Back = CustomerInfoDlg
Property(S): ReadyToInstallDlg_Installed_Back = MaintenanceTypeDlg
Property(S): InstallWelcomeDlg_Next = LicenseAgreementDlg
Property(S): LicenseAgreementDlg_Back = InstallWelcomeDlg
Property(S): LicenseAgreementDlg_Next = CustomerInfoDlg
Property(S): ModuleID_REDISTBASE = SQLBASE_Redist_64
Property(S): ErrorDialog = ErrorDlg
Property(S): MsiLogFileLocation = D:\rbs_install_log.txt
Property(S): PackageCode = {1AC68E73-94F1-4A01-B229-82B2F73C3326}
Property(S): ProductState = 5
Property(S): ProductToBeRegistered = 1
Property(S): CURRENTDIRECTORY = D:\
Property(S): CLIENTUILEVEL = 3
Property(S): CLIENTPROCESSID = 14660
Property(S): PRODUCTLANGUAGE = 1033
Property(S): VersionDatabase = 300
Property(S): VersionMsi = 5.00
Property(S): VersionNT64 = 601
Property(S): WindowsBuild = 7601
Property(S): ServicePackLevel = 1
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): WindowsFolder = C:\Windows\
Property(S): WindowsVolume = C:\
Property(S): System64Folder = C:\Windows\system32\
Property(S): SystemFolder = C:\Windows\SysWOW64\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Users\MEDSVR~1\AppData\Local\Temp\
Property(S): ProgramFilesFolder = C:\Program Files (x86)\
Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
Property(S): AppDataFolder = C:\Users\medsvradmin\AppData\Roaming\
Property(S): FavoritesFolder = C:\Users\medsvradmin\Favorites\
Property(S): NetHoodFolder = C:\Users\medsvradmin\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Users\medsvradmin\Documents\
Property(S): PrintHoodFolder = C:\Users\medsvradmin\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Users\medsvradmin\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Users\medsvradmin\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Users\medsvradmin\AppData\Local\
Property(S): MyPicturesFolder = C:\Users\medsvradmin\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): MsiAMD64 = 6
Property(S): Msix64 = 6
Property(S): Intel = 6
Property(S): PhysicalMemory = 8192
Property(S): VirtualMemory = 6311
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = medsvradmin
Property(S): UserSID = S-1-5-21-300911508-3398273753-3262312657-1000
Property(S): UserLanguageID = 1033
Property(S): ComputerName = JPNTKYINT01
Property(S): SystemLanguageID = 1033
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 19
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 13:55:20
Property(S): Date = 3/23/2015
Property(S): MsiNetAssemblySupport = 4.0.30319.34209
Property(S): MsiWin32AssemblySupport = 6.1.7601.17514
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): DATABASE = C:\Windows\Installer\6847f.msi
Property(S): OriginalDatabase = D:\RBS.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
Property(S): ROOTDRIVE = D:\
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): DOTNETCOREPATH = 1
Property(S): SourcedirProduct = {56D21E05-679B-40F2-94C1-DB0D7EB2E461}
Property(S): SOURCEDIR = D:\
MSI (s) (90:34) [13:55:20:201]: Note: 1: 1728
MSI (s) (90:34) [13:55:20:201]: Product: SQL Server 2008 R2 Remote Blob Store -- Configuration completed successfully.
MSI (s) (90:34) [13:55:20:201]: Windows Installer reconfigured the product. Product Name: SQL Server 2008 R2 Remote Blob Store. Product Version: 10.50.1600.1. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 0.
MSI (s) (90:34) [13:55:20:217]: Deferring clean up of packages/files, if any exist
MSI (s) (90:34) [13:55:20:217]: MainEngineThread is returning 0
MSI (s) (90:A4) [13:55:20:217]: RESTART MANAGER: Session closed.
MSI (s) (90:A4) [13:55:20:217]: No System Restore sequence number for this installation.
=== Logging stopped: 3/23/2015 13:55:20 ===
MSI (s) (90:A4) [13:55:20:217]: User policy value 'DisableRollback' is 0
MSI (s) (90:A4) [13:55:20:217]: Machine policy value 'DisableRollback' is 0
MSI (s) (90:A4) [13:55:20:217]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (90:A4) [13:55:20:217]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (90:A4) [13:55:20:217]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (90:A4) [13:55:20:217]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (90:A4) [13:55:20:217]: Restoring environment variables
MSI (s) (90:A4) [13:55:20:217]: Destroying RemoteAPI object.
MSI (s) (90:FC) [13:55:20:233]: Custom Action Manager thread ending.
MSI (c) (44:F8) [13:55:20:233]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (44:F8) [13:55:20:233]: MainEngineThread is returning 0
=== Verbose logging stopped: 3/23/2015 13:55:20 ===I copied and pasted the strips from SSMS in another computer
CREATE
TABLE [dbo].[Taxonomy](
[fish_id] [numeric](38, 0)
IDENTITY(1,1)
NOT NULL,
[fish_order] [varchar](50)
NOT NULL,
[fish_family] [varchar](50)
NOT NULL,
[fish_genus] [varchar](50)
NOT NULL,
[fish_species] [varchar](50)
NOT NULL,
CONSTRAINT
[Taxonomy_pk] PRIMARY
KEY CLUSTERED
[fish_id] ASC
)WITH
(PAD_INDEX
= OFF,
STATISTICS_NORECOMPUTE =
OFF,
IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS
= ON,
ALLOW_PAGE_LOCKS =
ON)
ON [PRIMARY]
ON [PRIMARY] -
How to refresh the page/table after completion of taskflow in popup
Hi,
Scenario:
In main page, having an emp-table and popup(which contains taskflow as region). In taskflow, iam modifying the emp-table data and after successfully completion of taskflow, want to refresh the emp-table present in the main page. How can we do this...?
Note:
(1) In Taskflow last activity is 'taskflow-return', where iam commiting all the data.After this i want to refresh the emp-table,(pop-up closes when it reaches last activity).
(2) Tried PPR in bean code of main page, it refreshes, but before commiting.
Something like, Refreshing the entire page either closing/hiding of popup, will help......?
Regards.try with regionNavigationListener:
public void myRegionNavigationListener(RegionNavigationEvent event) {
String newViewId = event.getNewViewId();
if (newViewId == null) { // null new view id indicates the taskflow has ended !
refreshEmpTableSomehow();
}As one alternative, take a look at my last message from this thread:
Re: How to handle the "cancel" button and "close" icon of a popup ?
Edited by: Cvele_new_account on Oct 5, 2012 12:19 AM -
How I can cancel sms/emails that remain in the iPhone memory after being deleted?
How can I cancel sms/emails that remain in the iPhone memory even after being cancelled?
ThanksTo better explain...Randomically, sms and emails deleted remain on the iPhone/iPad memory and can be found throught the "Search" function....How to permanently delete such files from memory?
-
Cursor remains in the selectionscreen even after giving the possible inputs
I am working for an Upgrade project (upgradation from 4.6 version to ECC 6 version) and the problem is in the ECC 6 Version.
When I press on the execute button or F8 from the selection screen by giving all the possible inputs, cursor position still remains in the same screen giving some status message in some different language other than English which i cannot understand i.e. Program is maintained in some other language other than English.
This program is giving output for the same inputs in the 4.6 version.
can anyone help me regarding this issue by letting me know some possible solution.Hi,
execute in debigging mode and analyse the results. you can find out the problem were it is coming from.
regards.
sriram. -
Delivery date differs in the VETVG table after the BOP run.
Hi,
I have created a STO with multiple line items with multiple delivery dates in the same STO. We have APO also
E.G. 1st and 3rd line item have todays delivery date(01.03.12) and 2nd and 4th line item have 05.03.12.
for the 1st and 3rd line item the system have material availability and we get the confirmed committed quantity from the APO system and got deliverd successfully.
for the 2nd and 4th line item there is no stock in R/3 and APO sytem, and we get the committed quantity as 12/31/9999, once the material is available, BOP run happens it gives committed date in the STO delivery schedule, we found the committed date between EKET table and VETVG table is different when we try to do it for the future date, i want to understand how the committed date arrived in the VETVG table and why it is differing from the EKET table, for the 1st and 3rd line item, the committed date is same in both the table, plese advise.
Regards,
RajeshHi
You can change the dates with userexits if you have specific requirements. Please, see these notes:
SAP Note 414484 - VL10: Delivery creation date all up to today (user exit)
SAP Note 198137 - VL10: Customer-specific enhancements / user exits
If you have any kind of 'accident' while you are trying solutions with records in table VETVG, see SAP Note 61148 - VL04 VL02 AME807 AME815: Insert to table VETVG.
I hope this helps you
Regards
Eduardo -
Mail remaining in the Draft-Folder after sending
When I write a mail that takes more than 10 minutes, it is automatically saved in the Draft-Folder.
Then, when it has been sent, it remains in the Draft-Folder.
If I relaunch the Mail-program, this same mail is twice present in the Draft-Folder (!!!).
This makes no sense, since the message has been sent.
Is that any new Bug with Mail and IMAP-protocol?I have the same problem.
When I send an email
- one copy goes to the draft folder an another copy of the email goes to the sent folder.
I believe the copy in the draft folder is a ghost.
I went to my online goggle mail and saw the email was sent. -
No Internet access after cisco vpn client connection
Hi Experts,
Kindly check below config.the problem is vpn is connected but no internet access
on computer after connecting vpn
ASA Version 8.0(2)
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
names
interface Ethernet0/0
nameif outside
security-level 0
ip address 192.168.10.10 255.255.255.0
interface Ethernet0/1
nameif inside
security-level 100
ip address 192.168.14.12 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
shutdown
no nameif
no security-level
no ip address
passwd 2KFQnbNIdI.2KYOU encrypted
ftp mode passive
access-list dubai_splitTunnelAcl standard permit 192.168.14.0 255.255.255.0
access-list INSIDE_nat0_outbound extended permit ip any 192.168.14.240 255.255.2
55.240
pager lines 24
mtu inside 1500
mtu outside 1500
ip local pool testpool 192.168.14.240-192.168.14.250
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list INSIDE_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 192.168.10.12 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.14.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set setFirstSet esp-3des esp-md5-hmac
crypto dynamic-map dyn1 1 set transform-set setFirstSet
crypto dynamic-map dyn1 1 set reverse-route
crypto map mymap 1 ipsec-isakmp dynamic dyn1
crypto map mymap interface outside
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 43200
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
username testuser password IqY6lTColo8VIF24 encrypted
username khans password X5bLOVudYKsK1JS/ encrypted privilege 15
tunnel-group mphone type remote-access
tunnel-group mphone general-attributes
address-pool testpool
tunnel-group mphone ipsec-attributes
pre-shared-key *
prompt hostname context
Cryptochecksum:059363cdf78583da4e3324e8dfcefbf0
: end
ciscoasa#Hi Harish,
Please check the o/ps below and route print in attached file
Latest ASA Config
ASA Version 8.0(2)
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
names
interface Ethernet0/0
nameif outside
security-level 0
ip address 192.168.10.10 255.255.255.0
interface Ethernet0/1
nameif inside
security-level 100
ip address 192.168.14.12 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
shutdown
no nameif
no security-level
no ip address
passwd 2KFQnbNIdI.2KYOU encrypted
ftp mode passive
access-list dubai_splitTunnelAcl standard permit 192.168.14.0 255.255.255.0
access-list INSIDE_nat0_outbound extended permit ip any 192.168.14.0 255.255.255
.0
pager lines 24
mtu outside 1500
mtu inside 1500
ip local pool testpool 192.168.15.240-192.168.15.250
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 192.168.10.12 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.14.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set setFirstSet esp-3des esp-md5-hmac
crypto dynamic-map dyn1 1 set transform-set setFirstSet
crypto dynamic-map dyn1 1 set reverse-route
crypto map mymap 1 ipsec-isakmp dynamic dyn1
crypto map mymap interface outside
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 43200
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
no crypto isakmp nat-traversal
telnet timeout 5
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
group-policy mphone internal
group-policy mphone attributes
split-tunnel-policy tunnelspecified
split-tunnel-network-list value dubai_splitTunnelAcl
username testuser password IqY6lTColo8VIF24 encrypted privilege 15
username testuser attributes
vpn-group-policy mphone
username khans password X5bLOVudYKsK1JS/ encrypted privilege 15
username khans attributes
vpn-group-policy mphone
tunnel-group mphone type remote-access
tunnel-group mphone general-attributes
address-pool testpool
tunnel-group mphone ipsec-attributes
pre-shared-key *
prompt hostname context
Cryptochecksum:12308d7ff6c6df3d71181248e8d38ba8
: end
ciscoasa#
Route Print after vpn connection
C:\>route print
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x40003 ...00 24 01 a2 e6 f1 ...... D-Link DFE-520TX PCI Fast Ethernet Adapter -
Packet Scheduler Miniport
0x250004 ...00 05 9a 3c 78 00 ...... Cisco Systems VPN Adapter - Packet Schedule
r Miniport
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.10.1 192.168.10.211 20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.10.0 255.255.255.0 192.168.10.211 192.168.10.211 20
192.168.10.211 255.255.255.255 127.0.0.1 127.0.0.1 20
192.168.10.255 255.255.255.255 192.168.10.211 192.168.10.211 20
192.168.14.0 255.255.255.0 192.168.15.1 192.168.15.240 1
192.168.15.0 255.255.255.0 192.168.15.240 192.168.15.240 20
192.168.15.240 255.255.255.255 127.0.0.1 127.0.0.1 20
192.168.15.255 255.255.255.255 192.168.15.240 192.168.15.240 20
213.42.233.97 255.255.255.255 192.168.10.1 192.168.10.211 1
224.0.0.0 240.0.0.0 192.168.10.211 192.168.10.211 20
224.0.0.0 240.0.0.0 192.168.15.240 192.168.15.240 20
255.255.255.255 255.255.255.255 192.168.10.211 192.168.10.211 1
255.255.255.255 255.255.255.255 192.168.15.240 192.168.15.240 1
Default Gateway: 192.168.10.1
===========================================================================
Persistent Routes:
None
C:\>
C:\>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : asu
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection 7:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : D-Link DFE-520TX PCI Fast Ethernet A
dapter
Physical Address. . . . . . . . . : 00-24-01-A2-E6-F1
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.10.211
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.10.1
DNS Servers . . . . . . . . . . . : 213.42.20.20
195.229.241.222
Ethernet adapter Local Area Connection 8:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Cisco Systems VPN Adapter
Physical Address. . . . . . . . . : 00-05-9A-3C-78-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.15.240
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : -
After Install VPN Client for Win V4.8 Get Blue Screen
When I installed the VPN client on my machine with XP, SP2 and updates the machine booted until it got to the Windows User Log On Screen where I immediately got a blue screen with the
Stop Code 0x96
- Invalid_Work_Queue_Item -
If I go to Safe Mode and uninstall the client everythings returns to normal. Anyone have any ideas?
Thank YouI too have the same problem. I am trying to connect to my corporate network through VPN(4.6). It ends up in following error.
DRIVER_IRQL_NOT_LESS_OR_EQUAL.
Configuration:
Dell Inspiron E1505.
XP Home SP-2.
VPN 4.6
History:
I was able to connect to VPN for past eight months. I have been working in the network with out any problems. Last month I had some problems in my laptop and ended up in formatting it.
I have used the default OS installation CD shipped along with the laptop. But after the re-installation, the system started failing. I have never been able to connect after that.
I too agree that this may not be same as the one described in initial posting. But the one explained by henryadams is a genuine issue.
This is not only with me. But also happens with two of my colleagues as well.
Would appricate if any one can help on this.
Thanks, Raja -
Hi,
I have installed a VPN Server using Easy VPN Server.
What is the command to show VPN Clients connecting to the VPN server?
How do I disconnect a VPN Client connection?
Cheers,
peiwaiThanks!
That's what you need to do:
1. Session monitoring
show crypto session summary
R100#sh crypto session summary Group ezvpngrp has 1 connections User (Logins) cisco (1)Group ezvpngrp2 has 1 connections User (Logins) cisco2 (1)
show crypto session and show cryption session detail will provide more details
2. User administrative disconnect:
R100#clear crypto session ?
active Clears HA-enabled crypto sessions in the active state
fvrf Front-door VRF
ikev2 Clear ikev2 sessions
isakmp Clear crypto sessions belonging to the group
ivrf Inside VRF
local Clear crypto sessions for a local crypto endpoint
remote Clear crypto sessions for a remote IKE peer
standby Clears HA-enabled crypto sessions in the standby state
username Clear crypto sessions of a user
clear crypto session username vpnuser would disconnect the user with the name vpnuser
Let me know if this answer your question.
Cheers, -
Updated apps remain in the Updates list after installing them
Not sure if this is a new "feature" or not...
After going to the App Store on my phone and selecting the "Updates" section, I see I have new updates for some of my apps. I select "Update All" and they all get downloaded and updated on my phone. So far so good. I go back to the App store later and click on "Updates" and all those apps are still in the list, only this time there is a [ OPEN ] button to the right of each app. I really don't want to open 15 apps... Is there another way to get the items in the list to go away (like they used to)?
ThanksWould be nice if you could collapse each date section. Just seems distracting to have all thise things in there. I just want to see what needs to be updated. Oh well, not a huge problem, just a nit.
Thanks -
After upgrading my WRT160N firmware, I cant access the router at all.!!
After upgrading I cant access the router at all.!!
I just upgraded the firmware to WRT160Nv2_v2.0.03.007_US_code.bin from a download.
I had the CD ver 2.00.2 build 8 on it originally. I upgraded because the router would have the DNS problems everyone is talking about both wireless and wired. I tried the all zeros 0.0.0.0 and that did not work.
Now that I upgraded, I cant get into the box at all. I dont get the log in screen. I have reset multiple times and power cycled through. The ip I am trying to get back in is 192.168.1.1
How can I get this box to respond?Are you able to ping 192.168.1.1 from the wired computer...?
Unplug the modem from the router,hard-reset the router for 1 minute,power cycle the router...Make sure that the computer is connected to the router on the Ethernet port...Now,Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1......If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security software on the computer...
If you get 4 replies then,go to start>>>run>>>and type "//192.168.1.1" and hit enter..If you are able to open the linksys setup page then,connect the modem to the router on the internet port and configure the router as per the ISP settings. -
WRT54G Very Slow connection speeds away from the router
I have installed my router in the living room. The connection speed is perfect in the living and dinning area , as we move away from the router to the inner rooms (bedrooms) the signal strength remains fine (very good) but slowly the internet speed drops untill it stops. The signal strenght still shows as very good. Doing a "repair" - switch off and "switch on" - on the laptops wirelss adapter brings back the connection speed for a while before it falls off again.
Any suggestions for this prob please!!!Make sure that the firmware on the router is up to date. If not then download the Firmware from the Linksys web site. Connect the computer to the router with the Ethernet cable. Open the setup page of the router. Got o Administration tab and click on firmware upgrade sub tab. Upgrade the latest firmware on the router.
After upgrading the firmware, it is recommended that you should reset the router and reconfigure the router.
Maybe you are looking for
-
Is ther a way to sort apps combatible with 1st generation Ipod touch.
Is there a way to sort apps on itunes, 1st generation Ipod touch compatible apps?
-
Process to secure different files on the basis of their filename
Hello everybody, I would like to know if It's possible to batch processing feature with the Acrobat standard version 9. I think that's not possible with the standard version. I want to securize a pdf files collection from their filename with differen
-
OIM 11G : Selecting Multiple RO's in Single "Self Request Resource" Failing
Hello Everyone, OIM 11G : End User "Self Request Resource" failing when user selects 2 or more resources in a Single Self Request Resource Request 1) On OIM 11G, I have created 2 resource objects, workflow, process forms. 2) Created the separate requ
-
Best methods for creating e-books from FrameMaker 10 (TCS 3.5)
I would like to know your thoughts on which of the following methods is the best, and easiest, way to create e-books from FrameMaker. I will most likely be using Calibre to do the file conversion. (1) Using File > Publish > ePub to create an ePub fil
-
HT4236 itunes menu no photo sync
The PHOTO label un the sync menu in iTunes doesn´t appear any more, what happened? I want to sync new photos to my iminiIpad and can´t find the way to do it, can someone help. THX Jorge