Route schedule

Hi all,
i am in my first step in the SAP.
i want to activate route schedule for inbound delivery.
when i go to the help, it display me tjis msg :
Route schedules can be determined for deliveries, orders and stock transfer orders.
so, do SAP dont generate a route schedule for inbound deliveries? and what should i do to create this route and to use the transaction VT01N.
so want you suggest me to do?
regards

hi,
in my case i have done :
create a schedulling agreement for two material
create inbound deliveries for this material
all master data and IMG activities required
i want to:
planify the transport in order to collecte the schedulling lines (ME38) for the two items
the shipment has to be done by the plant not by the supplier
problems :
i dont know how to create the route because it refers to one receiving point. i think is about legs determination
create a route schedule ( i do what u suggest to me but i still not working)
what are the steps 1 by 1 to planify the transport (generate automatically the deadlines....)
like i tell you. this is my first steps in te SAP and i have to resolve this problem.
regards

Similar Messages

  • Route schedule not updated in some line item of a sales order

    Hi Gurus,
    All order are processed through the EDI interface automatically. Order
    XXXXXXXXX for USA customer 40000XXXX is maintained in route reschedule
    setup T-code VL52 on specific departure day thursday.
    above are line item of same sales order, with same shipping point and route .
    Why only some salesorder lines missing the route schedule ?? 
    Please Help
    Regards
    Abhilash

    When you post a query here, you need to have patience until some members go through your post.  Please dont expect somebody should respond to you immediately as everybody has their own priorities.
    Coming to your query, it could be due to many reasons as per the following note:-
    Note 1750978 - Route Schedule does not populate on sales order
    Go through the Resolutions given in the above note and check with your system
    G. Lakshmipathi

  • ATP & Route Schedules in ECC 6.0

    Dear Friends,
    We are facing a problem in Production where we have enabled route scheduling based on shipping point working hrs and shifts. We have set up one shift from 7:00- 23:59 (we had setup 24:00 earlier ) and the system proposed PGI date of Saturday which is a big no no to business. The pick and load hrs are setup at 4:00 hrs each. Now there are couple of strange things happening in the order
    1) Scenario 1. Customer setup for route schedule every day 5 days a week. Expected delivery date is entered on order is 05/07/2008. The material is available earlier and the system confirms the order for 05/06/2008. The customer doesn't want delivery a day earlier.
    The calender is 5 work day on the shipping point. Routes schedules are setup at 10 am. What do we have to do in the system so that the order doesn't give PGI date on weekends. Also, how to do we make sure the confirmed date on order is same date requested by customer (provided on ground material exists)
    Thanks a lot
    Kashif

    Hi Kashif
    As per your scenario in schedule lines.
    1.  If the confirmation date is before customer requested delivery date, then delivery date should be customer requested delivery date.
    2. If the confirmation date is after customer requested delivery date, then delivery dates should be confirmation date.
    To meet the above it has to be handled through userexits / BADIs
    May be the following information (copied from spro) will give your some inputs.
    You can use the Business Add-In LE_SHP_DELIVERY_PROC, if you want to fill and update additional fields in the delivery items or in the delivery header.
    BAdI Interface IF_EX_LE_SHP_DELIVERY_PROC
    Hope this will help
    Sudhir

  • BAdI for Route Scheduling ...

    All,
    We are trying to  change the Route Schedule  during delivery processing . Using transaction VL10I , we are creating deliveires and maybe using some extis we want to change the route schedule as per our requirement.
    I looked at  BAdI's for routing , but found only one ,  which was for determining Route BUT  did not find any for Route Scheduling .
    Is there any BAdI ,(  user exit ) for Route Sheduling . I tried a lot BUT did not find one . Also have tries searching SDN forums for this but did not find any message giving some hint about Route Scheduling BAdI .
    Would appreciate your reply .
    Thanks,
    Rabbi

    hi,
    excellent reply...
    thnx
    Yerukala Setty

  • Route schedule issue

    Hi
    I'm using route schedules and I have examples where the route schedules dictates that the GI data should be on tuesdays.
    If I have a requested delivery date fare in the future and the goods is avaliable I get the wrong delivery date.
    If I have req. del date for friday 25th of may then I would have asumed that the GI date would be on tuesday the 22th of may.
    Instead it the GI date is calculated to the next tuesday the 28th of may.
    In addition to this my delivery day is earlier than my material avliability date!!! it looks very strange.
    Im using work hours but I' don think that that is the problem.
    Hope you can help explaning why reoute schedule destroys my delivery schedule.
    KR
    Jesper Dueholm

    dear,
    as far as i know the route schedules are determined by -
    shipping point, ship-to-party and unloading point, shipping condition, transportation group and calendar (remember that special and public days are possible)
    did you define your route schedules correctly?
    some steps are mandatory - activate the route determination, activate the delivery and route schedule for your shipping point
    you can use route schedules if you maintained working times for any of these items -
    *transp.planning time
    *pick/pack time
    *loading time
    *transit time
    regards,

  • Route Schedule in Third Party Orders

    We have made the necessary setting for the determination of Route and Route Schedule, but unfortunately the route schedule is not getting picked in the Third party order, but it works wonderfully with outbound delivery orders...
       Is there any other setting to trigger the RS for 3rd party orders? or is it that SAP doesnt support RS for 3rd party orders as there is no actual delivery happening?
    Regards
    Raj

    Dear Babu,
    As, in Third-Party Orders, theres is no Material-Movement (shipping) from Plant; Route Schedule will not be applicable. Customer places an order on to you and you have placed an order to your vendor, who will directly deliver the goods to your customer.
    Best Regards,
    Amit.
    Note: A very informative thread, on to Route-Schedule:
    [Route Schedule|Route schedule]

  • BAPI to upload Route Schedule

    Hi,
    My requirement is to upload Route Scheduel master data, which involves creation, deletion and Modifications of route schedule in the system.
    I need to know whether there is any BAPI  which fulfills my requirement
    Thanks,
    Maheswari

    Hello Maheswari,
    I think the best method to upload Route Schedule Master would be LSMW but as far as the BAPI is concerned you can look out for the BAPI using the Package of the transaction (For Route schedule) in SE80.
    Regards,
    Sarthak

  • How 's route schedule determination in SO

    Hi, Experts,
    We want active route schedule in SO for our biz requirement.
    I have do some customizing in system , Route can be determinate auto , but route schedule still not active.
    below is my setting in SAP
    1.Active delivery scheduling & Transport scheduling for Sales oder
    2. Maintain  Shipping point scheduling
       Factory calender "01"
       Working times"WTGE2S"
       Determine load. time = "A"
       Det.pick/pack time = "A“
    3.Rout Determination   have be done . we can find the route in SO.
    4.Route Schedule Determination have active for shipping point.
    5.VL51 Create route schedule master data .
    After I finished these steps, we still can not get route schedule during SO creation  . pls help to check what kind of problem ??

    Hi, Noel , many thank for your information . after I check the
    KBA 1750978 - Route Schedule does not populate on sales order .
    My problem have soloved .

  • Assigning a client to a "Route schedule"

    Hi Experts
    How can I assign a customer to a "Route schedule" (LIKP, AULWE) so that once I create a delivery for this customer (VL01N), the "route schedule" is brought automatically by the systeme.
    Thanks
    Hachim

    Hi,
    As per my understanding Route schedule is assigned to a route and required to be activated at shipping point, sales document type and delivery type level.
    I doubt if it can be assigned to a particular customer in standard SAP.
    The rout for a customer is determined thru transport zone of that customer and shipping point and shipping condition.
    Whatever the schedule you have maintained for that rout will reflect in sales document.
    http://help.sap.com/saphelp_46c/helpdata/en/35/b0e83887a62488e10000009b38f9b7/frameset.htm
    http://help.sap.com/saphelp_46c/helpdata/en/dd/560e08545a11d1a7020000e829fd11/frameset.htm
    Regards,
    Abhee.

  • Route schedule and Route Combination

    Hi Experts ,
    I have a Sales Order . Now Under schedule Line Tab I see two schedule Lines ,one line with confirmed quantity now, each schedule Line  with different route schedule .
    I would Like to Know , how the system understands when and which route schedule to take , when more than 1 route schedule is present for a Route .
    How the system Picks up the correct route schedule when 2 or more route schedule is there for A route.
    Thanks
    MM_sD

    Hi Sayantan,
    Actually I want to understand how a Route picks up different Route schedule .
    Below is the schedule Line . Now for the 1st date I see route schedule as SSGPT321TU
    For the 2nd Date in schedule Line I see different Route Schedule as SSGPT321MO.
    Now how the Route SGSGPT decides which schedule to take for which date , how does this works
    Thanks
    MM_sD

  • Determinate route schedule in SD order VBEP-AULWE

    Hi all,
    I want to activate route schedule :
    - I have a route schedule masterdata (VL51) : for one route, one shipping point and one sold-to party
    - I have actived scheduling with route schedule for my shipping point and for my sales document type (spro > LE > shipping > basic shipping > routes > routes schedule determination)
    - my shipping point has a working time and a value in "pick pack time in work hours".
    In my order, route and shipping point are determinate but not the schedule route  (field VBEP-AULWE)
    I don't solve the problem, I've you got an idea ?
    Thanks a lot !!
    Celine

    Does anyone found a solution in the meantime?
    I maintained all the mentioned settings but route scheduling for the relevant shipping point is still not working. I have only success when I add receiving hours for the specific day at the customer master of partner WE. But this cannot be the solution. If so I wouldn't need the route scheduling functionality.
    What is the minimum requirement to get route scheduling to work? Maybe I missed something.
    Is it really mandatory to maintain working hours for the shipping point? At note 146829, point 3.2 it's written that working hours are only necessary when I want to get "precise" scheduling results. I don't want this, determination on a day basis is precise enough.
    Best regards,
    Stefan
    Edited by: Stefan Engel on Feb 16, 2010 12:54 PM

  • Finds the correct route schedule

    Master data  :     Route scheduling    transaction  VL51  and  VL52
    The customer is linked to 2 route schedules with different goods issue dates :
    Every monday at 10  AM 
    Every thursday at 3 PM
    In the sales order, when you enter a first delivery date, R/3 finds the correct route schedule and calculates precisely the goods issue date according to the customer delivery date.
    If you change the delivery date in the sales order item (option: edit/fast change of /delivery date), R/3 does not determine a new route schedule and stays with the first one.

    In my personal opinion, you can have any certifications you want but if you can't/don't pass the "practical exam" that we've set up as part of a candidate's interview process then you're out.  
    In my present job, I've seen so many candidates applying for jobs with CCNA, CCNP and CCIE "certification".  The very minute we informed them that part of the interview process is a "practical exam" involving configuration of some routers and switches ... these so-called "certified" candidates back out.  

  • LSMW  VL51 Route Schedule Master

    Hi Experts,
    I am doing a LSMW conversion for tcode VL51 and facing problems while executing step "Run Batch Input Session".
    My file layout is like this:
    023 753/005/MK
    87 default 01 01
    88 default 02 01
    While processing session, system is creating Route Schedule with the first line item only i.e. 87 default 01 ....etc.
    Have processed the session in Foreground mode and noticed that, Route Schedule after getting created for the first item, is coming back to the VL51 initial screen with Route Schedule Nbr(just got created) and system throwing error msg "Route Schedule 753/005/MK already exsists".
    I have chked all the steps in my LSMW and they seem to be OK i.e. read data, convert data, etc.
    Could anyone pls help me fix this issue? Thnkxin advance.

    Hi,
    I have already changed the source structures viz.Header & Item by adding the 'Identifier' field in them.
    Yes, u r right that I did the recording with just 1 line item.This is because, I do not know how many items a
    particular Route Schedule would contain.Since that was not working, I repeated the recording with 2 line items, but he problem still persists.
    I  was checking each and every step of the LSMW and found that in 'Read Data' step system is reading the source
    file as it is, i.e. in a hierarchical manner with 1 header and 2 line items as there in the source file. But, after the conversion step, when I am executing 'Display Convert Data', I am seeing two distinct lines as Header->1st line item and
    Header->2nd line item.It's not showing in a hierarchical manner.
    I wonder if this is the cause, but having no clue how to rectify it.
    Plz help.....

  • Route schedule is no getting for APO products

    Hi,
      when we create sales order for ecc material, Route schedule is also getting automatically,but if we create a sales order for APO products we are not getting the Route schedule.
    Please help me how to resolve this issue.
    Thanks.....

    Dear Babu,
    As, in Third-Party Orders, theres is no Material-Movement (shipping) from Plant; Route Schedule will not be applicable. Customer places an order on to you and you have placed an order to your vendor, who will directly deliver the goods to your customer.
    Best Regards,
    Amit.
    Note: A very informative thread, on to Route-Schedule:
    [Route Schedule|Route schedule]

  • Route Schedule missing from Sales Order

    Hi,
    I'm relatively new to this area of SAP. I've created a Sales Order that has picked up the correct Route but, looking on the schedule line, no Route Schedule has been defined even though, I believe I've followed the required steps.
    Can you point me in the right direction as to how to check if my Route Determination process is complete.
    Many Thanks,
    Mike

    Check the following
    · Shipping point
    Where are the goods coming from?
    Ship-to party and unloading point
    Where are the goods going to?
    Shipping condition
    How are the goods being shipped?
    Transportation group
    Which goods are shipped?
    ® For example, which type of goods?
    Calendar week / year
    When are the goods to be shipped?
    If you do not explicitly enter the week and the year, the entry applies for each calendar week. If you enter a week and a year, the route schedule only applies for this week.
    You can only use route schedules if you have maintained the working times and therefore at least one of the following times in minutes:
    · Transportation planning time
    · Pick/pack time
    · Loading time
    · Transit time

Maybe you are looking for

  • Does anyone know how to customize a adapter (PI7.1)(not adapter module)

    Dear PI experts:   i want to develop a adapter to  fulfill the user' requirements,my pi version is pi7.1,and had download the sample adapter code,it's a zip file which contents some java class. and i now i have a double about developing the adapter:

  • Unable to open a protected PDF with Adobe Reader

    Hi Guys, I'm trying to understand how LC Righs Management works. So what i'm doing is following: 1. Protecting a PDF with a specific preconfigured right in my policy server by using Acrobat Pro. 2. Trying to open same fine in Adobe Reader gives me "A

  • Problem Converting Keynote Quicktime to WMV with Flip4Mac

    HI All I can see that perhaps one other person may have had this issue. I have a continuous presentation exported from Ketnote as a Quicktime Movie. This plays from end to end without a hitch. I am using Flip4Mac to convert to WMV, something I have d

  • Iweb problems and idisk problems are they related?

    I have not been able to publish siince upgrading to iweb1.1 two days ago I get the same message everytime "Publish failed due to a network error. Check your Internet connection and try again." Also I can't get into "idisk" on the web or the finder ba

  • Which user actually makes the deployment from J2EE engine?

    What's up ? I keep getting this error when I try to deploy an ear file: Settings SDM host : vm2003server SDM port : 50018 URL to deploy : file:/C:/DOCUME1/JOS1/CONFIG~1/Temp/temp17955JSP_teste_EAR.ear Result => deployment aborted : file:/C:/DOCUME1/J