Route TCPS01 is not maintained in route master

Hi Gurus,
At VT01N level, I fail to understand what this message or error from the system means:
"Route TCPS01 is not maintained in route master"
Can anyone help me solve the problem?
Thanks
regards
Chris

Hello Chris,
Route TCPS01 needs to be maintained in TVRO table.
Following customization settings are required for this route determination;
SPRO>>Logistics Execution>>Transporation>>Basic Transportation>>Routes>>Define Routes EVery point has to be configured and determined.
SPRO>>Logistics Execution>>Transporation>>Basic Transportation>>Route determination
SPRO>>Logistics Execution>>Transporation>>Basic Transportation>>Route Schedule Determination
Following SAP documentation will also be useful
http://help.sap.com/saphelp_46c/helpdata/en/dd/5607da545a11d1a7020000e829fd11/content.htm
Br,
Tushar

Similar Messages

Recipient type not maintained in Vendor master During TDS deduction

Hello Gurus,
My client Posted somany Documents deducting TDS, but during deduction time all other vendor masters (except one or vendors) were not maintained with Recipient type. due to this system has taken posting date as due date for challan payment.
for example if the document was posted on 10 Oct 2009, system showing due date as 10 Oct 2009 in t Code J1INMIS ( challan update tab). Documets pertaining to those vendors maintained with Recipient type is correctly showing due date as 06 Nov 2009.
now when i want to make challan in J1INCHLN documets pertaing to the correct vendors are being up by the system. but other line items are not picked up..
how to solve this problem >?//
Please advise..
Mamillapalli V

No i thought so,, but system picked up the posting date as due date. this happend only for those vendors in whose vendor masters the recipient type was not maintained.
For two three vendors where Recipient type was maintained those TDS line items due date is correctly showing as 06 Nov 2009. this iam telling for the same TAX TYPE (ex. IE.).
now, these few line items are only displayed in J1INCHLN. the input i have given is
Posting date 01 Oct 2009 to 31 Oct 2009
Section - 194C
iam still not convinced, Please advice..
Thanks in advance

Error Valuation & is not maintained for material & in IDOC

Hi Experts!
I'm currently having a difficult problem here.
This is an idoc issue. The scenario is: An idoc is created from WEB and an error appears "Valuation & is not maintained for material &" in SAP. But when we reporcess again usign the same data through WE19 everything seems to be okay. The status is green. Do you have any idea regarding this?
The error must not appear because the material that is being process is a non-stock material which does not need valuation.
I hope somebody can help me on this.
Thanks in advance!

Hi,
Please see that error ME124 ir raised because view "plant stock /
storage location stock" is not maintained in material master for plant.
if the material is not available in stock then no delivery and no
transfer is possible. It is not possible for non-stock
materials to make an stock transfer.
If you are using ME21* to create stock transfer order,
Please make sure the view "plant stock / storage location stock"
have maintained for the relevant plant in the material master
record.
Please also make sure the quantity flag have switched on in Ta OMS2
for both the delivery and receiving plant for the material type
that you are using. Otherwise, the error message ME 124 will be
issued.
But if you get the error error ME124 only for a vendor is the
assignment in Vendor Master (MK03) to plant. This assignment is
used in case of STO, in which plant must be assigned to vendor.
In order to not get the error, please remove plant in the
following path:
XK03 > Extras > Add. purchasing Data > Plant assignment.
BR
Nadia Orlandi

Error in Costing for Routing not maintained

Dear Experts
We are working on ECC6.0, creating Material Cost Estimates with Quantity Structure.
The issue is we want the system to give error when Routing is not maintained for the Inhouse Materials.
I've seen system only issues msg CK 461 as a warning message when executing CK11.
This message moreover doesnt exist in Costing Error management.
I'd tried adding this message in OBMSG ans then maintaing it as error in OBA5 but still it is displayed as warning.
I've searched threads but didnt get any relevant results.
Please suggest a way out.
Regards
Kapil

Dear Christian
Message CK 229 works but only if the routing is not maintained.
But if the routing is maintained but without operation, then system issues message CK 461 which seems is not configurable.
Can you suggest if an error can be given for such a case.
Regards
Kapil

Problem with Updating of Routing Master data

Hi,
    My requirement is I have to download Routing Master data into excel sheet. Once downloading is over, user can change some fields data in excel sheet. Again ull upload the changed excel sheet data to SAP. Finally these changes will effect to the Routing Master data.
I am downloaded routing master data using FM CARO_ROUTING_READ.
I changed some fields in excel sheet. I tried so many FMs for updating the routing master data, but system not allow to me to change the Master data.
I tried with CP_BD_DIRECT_INPUT_PLAN,
             CP_BD_DIRECT_INPUT_PLAN_EXT,
             CP_BT_PLPO_UPDATE, for updating Routing Master.
And Standard program RCPTRA02 also.
Please send me one function module which can update the Routing Master data. But that FM have the same structure of CARO_ROUTING_READ. Otherwise type conflicts will come.
System throws error YOU CANNOT EDIT TASK LIST OBJECTS WITH ACTIVITY TYPE&.
Regards
Shaik

Hi,
I have found in OSS the following programs to download and upload routings:
- Note 107242: You can create the sequential input file with report RCPDIRO1
- Note 106965: Direct input routings: reading datasets
Maybe this can help you to upload your routings in another way. Unfortunately I haven't figured out yet how the program exactly works. So if somebody can give me some info about that one, it would be great.
Thanks,
Steve

Please specify Transaction code to load SCM ROUTE MASTER DATA (EWM Routes)

Please specify Transaction code to load SCM ROUTE MASTER DATA (EWM Routes data).
Regards
Dhirendra
Moderator message - Moved to correct forum
Edited by: Rob Burbank on Apr 21, 2009 8:58 AM

Route definition is done at 0VTC. You have define the Route with its description, Transit time, factory calender, carrier info etc. It is stored in TVRO table
Then yoiu will maintain the route determination in 0VRF.
Route Determination:
Dep zone of the shipping point + Destination zone (T-zone) of the ship-to + Transportation group + shipping conditions.
Route determination details are stored in TROLZ table.

Error F5507 on MIRO. "The general master data of the G/L account 161000 is not maintained in the chart of accounts 1000"

I was doing a MIRO w.r.t PO. I was getting the following error - "The general master data of the G/L account 161000 is not maintained in the chart of accounts 1000." I later went ahead and created the GL Account in the COA. now the error is recitified. But, I would like to know what happens in the background.
Could someone explain me this? How is the G/L account determined?

Hi,
At the time of MIRO system posts below Accounting Entry:
GR\IR Clearing Account Dr--> This will be picked from t-code OBYC- key WRX
Vendor Account Cr--this will be picked from vendor master data
If there are any tax or TDS involved then system post to those accounts as well.
I guess 161000 is your recon account? Because if it is GR\IR then you would have got error at the tim e of MIGO ( if you have already done that)
Hope this is clear to you.
Br,Vivek

FK01: Vendor Master Record Validation Table is not maintained

Hi Experts,
Appreciate your help on this matter: I have created a new Vendor Account Group and tried to used it. However, upon saving I encountered problem: error message Vendor Master Record Validation Table is not maintained. Do I missed some configuration?
Thank you very much!

Hi,
STEP 3 : In Financial accounting > A/R A/P > Business Transactions > Outgoing payments > Manual Outgoing payments >
Define Tolerance (Vendors)
STEP 4 : Create a GL A/c Creditors in FS00 as a balance sheet a/c and in control tab give reconciliation type as Vendors
and Field Status Group G067. Assign this account in company code data in FK02.
Regards,
Sadashivan

Overlapping and splitting in routing master.

Hi...
I'm setting the PP routing master and using the capacity requirement planning.
Do you have any definition or document about the overlapping and splitting in routing master ?
In part of overlapping. There are the options
- Required overlapping, Optional overlapping, Continuous flow prod
Could you please explain how does the system calculate the lead time in production when I use the different option together with Min.overlap time or Min. send-ahead qty ?
Best Regards
JN

Hi,
Refer the SAP help given below it comes with an example & should clarify your query
http://help.sap.com/erp2005_ehp_04/helpdata/EN/8b/67221404f111d293560000e8323492/content.htm
Regards,
Vivek

Route master configuration

Dear Friends
i need some guidance as to how to configure route master in SAP to calculate the freight in a PO automatically. this is a completely new area for me and any doc to help out on the issue would be really welcome and appreciated
regards
gurvinder

show phy
show circuit
verify that status of the physical link.
show arp
make sure you have aro entries for the servers and gateways.
Finally, if you are reusing the same ip addresses, make sure to clear the arp table of the servers and gateways.
Regards,
Gilles.

Group key on Customer master not maintainable.

Hi All,
Group key field under customer master General data is not editable for some customers only. What restricts us, not maintaining this field.
Thanks
Raghuram

Hi,
Customer 14788 is having Recon Account (5200500) , Group key is editable.
Customer 702270 is having Recon Account (5200500) , Group key is not editable.
So i understood that this field is not controlled by field status. Correct me if i am wrong.
Thanks
Raghuram

HP Officejet 6500A Plus will not maintain wireless connection reliably

For the HP EXPERTS on Expert Day, April 18, 2012:
B.L.A.T. (Bottom Line At Top): We have an HP Officejet 6500A Plus purchased about 5 months ago. We wanted to use it as a wireless-connected printer in another room besides our home office. It is useless to us because it will not maintain its wireless connection, even sitting just a few feet from the router in the same room. Except for numerous hours of troubleshooting, we have left it sitting powered up, but unused and idle, for almost the entire 5 months in our home office. DURING ALL THAT IDLE TIME, IT HAS LOGGED OVER 3,200 DISCONNECTS, at a consistent rate of 24 disconnects every 24 hours, even though it ALWAYS reports that the wireless signal quality is “EXCELLENT” (all this is according to the Wireless Network Test Reports we’ve printed throughout the last 5 months). So our question is, what is it that this printer is trying to do once an hour over a wireless connection that is causing these thousands of disconnects? And how can we stop it?
NOTE! Before you round up the usual suspects (namely our router and our PC firewalls) please note that we also bought an HP Officejet Pro 8600 Plus ON THE SAME DAY as the Officejet 6500A Plus. The 8600 was also installed with a wireless connection, and has worked without a single network issue for the entire 5 months.
NOW, FOR THE REST OF THE STORY…
WHO WE ARE: My wife and I have worked on HP equipment for 33 years, starting in 1979 as corporate customers of HP when we worked for Exxon; then we both worked for HP directly for 17 years; and we’ve now used dozens of pieces of HP equipment in our home during the last 12 years in retirement. We’re primarily software folks, so we’re not exactly experts in hardware and networking, but on the other hand, this ain’t our first rodeo either.
OUR CONFIGURATION:
PC’s – All running Windows 7 x64 with all important patches applied and Norton Internet Security 2012: HPE-270f and HP AIO 200-Quad, each with full 6500A and 8600A drivers installed on wireless connection. These 2 PC’s themselves can connect either wirelessly or via Ethernet to our home network. The 270f has a dual-band wireless board. Both bands work. We also have a new dv7t laptop with only the full 6500A driver installed via wireless connection. The laptop is now upstairs and it’s connected to our home network wirelessly without any issues. (This is where we had hoped to also put the 6500A, but it needs to work reliably via wireless connection.)
ROUTER: Netgear N600 WNDR3700 providing Ethernet and wireless networking. Router provides a very strong wireless signal throughout the house. No wireless problems with any other equipment including an iPod, two Kindle Fires besides all the HP equipment.
PRINTERS: Besides the two HP printers, the HPE-270f PC has a Canon MP960 installed on it. And if we can’t get the 6500A working right or replaced with something that does work right, we may be buying our second Canon printer. By the way, on the 6500A, ePrint and App’s are set to ON, but of course they’re not being used, just like everything else on this AIO.
OTHER: We also have a Sonos music system that connects to our network via Ethernet and has its own proprietary mesh network (on another frequency) for transmitting ripped music wirelessly to speaker units throughout our house. (If you aren’t familiar with this totally cool system, check out sonos.com). We’ve never seen any evidence of interference between these two wireless networks, or our wireless phone sets either.
HP TOOLS AVAILABLE ON ALL 3 PC’s: HPU
UPDATE 5.003.001.001 (reporting everything up-to-date); HPHDU 3.1.0.17; HPPDU 5.0.0.015 and HPNDU 4.3.0.002.
SYMPTOMS: The 6500A Plus installs quickly and easliy, and connects wirelessly just fine during installation. But sometime over the next hour (usually less), it disconnects and won’t print from PC applications. Sometimes the application puts up an “Unable to communicate with printer” screen, even though the PC usually thinks the printer is “ready”. Other times, the PC thinks the printer is offline (but printers don’t have “offline” buttons anymore!). Often, if you just leave everything alone, the 6500A will somehow reconnect and print out the spooled file 5-30 MINUTES later. So it does usually seem to be able to recover given some time, but that doesn’t always fit our schedule! Occasionally, turning the wireless radio on the printer off and back on will fix it right away. But usually, you have to power the printer completely off, and then back on. As far as we know, that always fixes it…..until the next disconnect a few minutes later!
PREVIOUSLY TRIED: After reading some of HP’s wireless network support websites, I manually assigned a fixed IP address to this printer. It didn’t seem to matter; according to the wireless network test report, it still logs disconnects at the rate of one per hour, and all the failure symptoms were the same.
We also dabbled a bit with setting this printer as “trusted” to the Firewall, but that didn’t seem to matter either.
Next, we connected the printer via Ethernet. The printer immediately started to work, even though it had just been in its “failed” state over the wireless connection. As far as we know, it never failed while connected via Ethernet. This seems to point to a purely wireless hardware/firmware problem on the printer itself.
Late last year, I tried two different chat sessions about this with the inter-continental AIO support teams, each one lasting several hours. Unfortunately, none of their optimistic solution scripts seemed to fit our problem. They both seemed determined to reconfigure the 6500A as a TCP/IP printer, which of course worked fine initially, just like everything else. At this point, they would understandably want to close the chat. But 20-30 minutes later, we could no longer print to it. During the second chat, they got into one of our PC’s remotely and effectively turned off the spooler (by selecting “Print Directly” or something like that). After that, all was well again (as usual) UNTIL the printer disconnected, at which time attempting to print from that PC would HANG the application (since the spooler was no longer buffering) and eventually hang the whole PC. One giant leap backwards. That’s when I gave up on the multi-hour chat sessions.
The three diagnostic utilities (HDU, PDU, NDU) have been tried over and over. When the printer is in its disconnected state, the DU’s usually don’t detect the 6500A at all, or if they do detect it, they are unable to fix anything. Frankly, it’s easier to just power the printer off (which takes about a minute) and power the printer back on (which takes more than a minute) and then wait for the spooler to kick in (usually about 30 seconds). BUT WE DON’T CONSIDER THAT A SOLUTION!!
B.L.A.B. (Bottom Line At Bottom): We have used up nearly the entire black ink cartridge and at least a ream of paper troubleshooting this brand new printer, to no avail. This printer is useless to us unless it can maintain a wireless connection reliably. Please help!
Thanks –
Bob and Jane
(Note: we have an appointment from about 11:20 am EDT – 1 pm EDT, 8:20 am PDT till about 10 am PDT)

I bought the Officejet 6500A Plus about one month and have experienced the very same problem. I tried to remedy this problem following suggestions in a number of different posts (static IP, router, firewalls etc), all to no avail. Last week I called support. The support I received by the tech over several hours and different days for a week was very good. However none of his suggestions corrected the connection issue. After today's recommended fix failed, he advised HP is aware of this issue with the 6500 and other affected printers. He claimed HP was working on a firmware upgrade. He did not know when the update would be provided. The tech also claimed HP acknowledged this problem in a written announcement. He agreed to email the announcement to me. I haven't received it. This has been the only problem I've had with the 6500

Payment method not defaulting from Vendor master data

Hi All
I am running F110 payment run. In the Payment proposal SAP is not pulling payment method from vendor master data for some invoice. we have like two payment methods , Sap is defaulting payment method for one type of payment method and not defaulting for the other...What could be the possible reasons?( for both the invoices We are not maintaining any payment method)

Hi
In F110 if payment methods are different from vendor master data and payment methods mentioned in parameters tab it will take payment methods from parameters tab, so that you have to give both payment methods in parameters tab so that it will consider both.

How to maintain the material master data in plant

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

Fiscal Year Variant not Maintained

Hello All,
while creating asset master using AS01 T Code i am getting an error "Fiscal year "A3" Variant is not maintained for Financila year 2010 for Compnay Code 0600".
but i have configured Fical year variant and assigned to co code, i am able to post the transactions for all the periods i.e financial year 2010.
here my question is whether we need to maintain the Fiscal year variant separately for Asset accounting in ECC 6.0.
Please Suggest
Thanks
Shankar

hi,
please check the below path,
spro--Financial Accounting (New) -- Asset Accounting -- Valuation -- Fiscal Year -- Fiscal Year Variants -- Specify Other Versions on Company Code Level and Specify Other Versions on Depreciation Area Level.
check the above path, is there any FY is assigned to your company code or Depreciation Area.
regards,
Gopi.P

Route TCPS01 is not maintained in route master

Similar Messages

Maybe you are looking for