Route Traffic to down a specfic link

Question

I need to route traffic that is sourced from 10.1.50.0 network down link 1. Currently all traffic goes down Link 2. I want all traffic except 10.1.50.0 network to still use Link 2 as primary. What would be the best approach a static route for the 10.1.50.0 network or some type of policy map or something else? Thanks for the help

Answer 1

Thanks for the reply. I created the access list and policy map from above but can not put the policy map on the VLAN interface. The commands are there but when I verify by looking at the interface it is not there. It is a 3750 G with IPSERVICES IOS. Any ideas? Thanks
Standard IP access list 50
10 permit 10.2.50.0, wildcard bits 0.0.0.255 log
sh route-map
route-map **VLAN250**, permit, sequence 10
  Match clauses:
    ip address (access-lists): 50
  Set clauses:
    interface GigabitEthernet2/0/1
  Policy routing matches: 0 packets, 0 bytes