Route two separate networks via RJ45 on the router E900. is it possible?

Good day! I wonder if the E900 router can be used to route two separate networks. Not via wifi, but via RJ45. eg 192.168.0.1 and 192.168.1.1 If possible, I would like to know how? I thank the attention.

You can add Static routes and disable NAT. This model of router isn't designed for that purpose. The LRT224 is the router you want for this purpose if lower cost is required.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Similar Messages

  • Using two wireless routers for two separate networks

    I have one WRT54G router and a newly purchased E2000 router that replaced the WRT54G . I have one DSL connection coming into the house.
    I have the DSL going directly into my main E2000 router which runs my existing wireless home network and it does this wonderfully. My son wanted the older WRT54G router to create his own network where he has it set up for his own purposes so I gave it to him. He has everything set up to where we have two functioning networks that do not conflict which is great however he ran an Ethernet cable from the e2000 to the WRT54G to make this happen. This cable is a problem since it basically is about 50 feet of ugly cable running up my stairs to his room. Is there a way to have the routers still work in tandem as they are now to manage two separate networks but to instead have them connected wirelessly and eliminate the existing wired setup?

    You would need a third party firmware like DDWRT to do that (it will void the warranty too)
    Or you need a wireless bridge like the WET54G or WAP54G set to bridged mode
    "Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

  • Download connections doesn't close after I cancel the download, it keep like I am download and only close when I disable the network adapter or reset the router or the firewall

    download connections doesn't close after I cancel the download, it keep like I am downloading and only close when I disable the network adapter or reset the router or the firewall.
    I use pfsense as my firewall and see the traffic not reseting to zero when I cancel download.
    Also, IE doesn't have this problem. When I cancel the download the traffic drops to zero.

    And this problem seems to be systemwide. Since I created a new user and under which problem still exists.
    Hope apple will look into it

  • HT204053 If two separate iPhones are signed into the same AppleID can the iMessages be read on both devices?

    If two separate iPhones are signed into the same AppleID can the iMessages be read on both devices?

    Welcome to the Apple Support Communities
    You're right

  • SCVMM 2012 R2 – two iSCSI network interfaces connected to the same subnet

    I would like to configure two networks in SCVMM 2012 R2 which will be used by VMs to connect to iSCSI SAN. Both of these networks should be connected to the same subnet (192.168.100.0/24) because they will connect VMs to Dell EqualLogic using iSCSI MPIO.
    Those networks should be available on all Windows Server 2012 R2 Hyper-V cluster nodes.
    When I try to create two logical networks in SCVMM with the same subnet, I receive error (Unable to assign the subnet 192.168.100.0/24 because it overlaps with an existing subnet)
    How should I configure networking in SCVMM to allow one virtual machine to connect to the same subnet using two network interfaces?

    "How should I configure networking in SCVMM to allow one virtual machine to connect to the same subnet using two network interfaces?"
    You can achieve this by simply adding multiple vNICs to a VM - connected to the same VM Network. 
    -kn
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • HT1552 Im setting up a server with the port 25565 and im doing it with Port Map but the problwem is i cant seem to get it to work with my router. it goes through my macmini to the router and the expansion hardrive

    Im setting up a server with the port 25565 and im doing it with Port Map but the problwem is i cant seem to get it to work with my router. it goes through my macmini to the router and the expansion hardrive

    Im setting up a server with the port 25565 and im doing it with Port Map but the problwem is i cant seem to get it to work with my router. it goes through my macmini to the router and the expansion hardrive

  • Connect Win7 host and XP mode to two separate networks?

    I would like to connect XP mode to a network that is different from the one the Win7 host is connected to.
    The set up would look like this:
    Win 7 host is connected via wired Ethernet to inside network (i.e. 192.168.1.0/24)
    XP Mode would connect via wireless or another wired NIC to external network (i.e. 24.226.0.0/16) 
    The only path those two could talk to each other is via router/firewall connecting the two networks 
    All information I could find only  talk about how to connect XP Mode to the same network as the host. I want them to connect to separate networks. 
    In order to separate the host and the VPC I have to unbind all protocols on the host from the second NIC except Virtual PC network filter driver. When I do that, the VPC emulated NIC connects, but will not get the DHCP address. If I set the static IP
    on the VPC emulated NIC, it will not reach the default gateway.
    The only way to make it work is to bind TCP on the host to the second NIC. If the host can see the other network, VPC can connect to it also. But that defeats what I am trying to do which is to separate the VPC and the host at the IP layer.
    I also tried to use USB NIC and attach it "directly" to the VPC thinking that if I installed the drivers for that USB NIC within VPC and it could talk to the NIC directly, it could work. Unfortunately there is no "bridge mode" for
    USB ports so this did not work.
    Did I reach the limits of network connectivity for XP Mode?

    You're on the right track.  Using bridge mode and only allowing the VPC driver on the 2nd NIC should work...at least it used to work and it was the way to do what you want to do.
    I haven't done this in a while, but it seems that something may have changed on VPC's network drivers.
    Do you have any firewalling or similar on the host that may be interfering with the NIC?

  • Setting up two separate networks with access to shared resources

    Hi all,
    We have a two separate businesses in the same building who will both need access to shared resources and the same internet connection. They will need to remain on separate subnets and cannot communicate directly to each other. The current switch is a Cisco ESW-520-48P and we are looking at purchasing an SG-300-20P for the new business moving in. Heres how we envisage setting it up:
    ESW-520 will host Company A's network. Workstations, servers etc
    SG-300 will have two VLANS. VLAN1 will host all Company B's network. Workstations, servers etc. VLAN2 will host the shared resources such as printers.
    The internet gateway is a UNIX based system with 3 NICS. 2 NICS are taken up by ADSL connections while the other NIC is the LAN, which would connect to VLAN2 on the SG-300. We would like to define which ADSL connection to route through depending on which subnet traffic is originating.
    The ESW-520 will need access to the shared resources and internet gateway on VLAN2 on the SG-300.
    Will this be possible with these two switches? Would this be the best way to go about it?
    Appreciate any recommendations you can provide.
    Thanks,
    Tom

    Hi Tom,
    Thanks for confirming that. The SG-300 will be set in layer 3 mode. In regards to the ESW-520, will this just connect to one of the VLAN2 ports on the SG-300?
    The default gateway for devices in Company A's network will be the ESW-520, which will have a static route to the VLAN2 subnet.
    The default gateway for devices in Company B's network will be VLAN2 IP on the SG-300.
    Does this sound correct?
    Also as long as there are no routes setup between Company A and Company B's subnets, there won't be any traffic passing through such as DHCP acks etc?
    Thanks again,
    Tom

  • Can two separate Game Center users share the same Apple ID?

    Two people share the same Apple ID on their separate iPads. Now want to start getting into games and compete with Achivements. Can they have separate Game Center accounts using the same Apple ID?
    (similar to how they use the same Apple ID with FaceTime, but are able to use different email addresses for video calls)

    Creating a new iTunes account does not remove any purchases made on a different account.
    If you want to create a new account : iTunes: How to set up an Apple ID within iTunes
    Or if you will want to use it in the stores and don't want to give credit card details : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method
    Or if you are not currently logged into an account in game centre then you should have a 'create a new Apple id' link at the bottom of the login screen in it.

  • Can I have two separate logins/restricted directories in the same web site?

    Hi,
    I want to have an admin area where I go against a user table to see if the user has admin rights and a separate area of the web site where regular users need a username and password that is validated against a different table.
    All the pages in the admin area are in the admin directory.
    All the pages in the other restricted area are in a consumers directory.
    Both these directories are off the root.
    Will this work ok? It seems to be, but I just wanted to check.
    Many thanks!

    No, I have two separate tables. It seems to be working, and I am hoping it is because I've kept all the pages that use one table in one directory, and all the pages that use the other table in another directory. Just wondering if I am asking for trouble. They are two different functions. One is for site administration, and one is for a number of users.

  • Two separate networks required

    Hello,
    I have at my disposal a 1 TB DB Time machine and also an AEBSn.
    Here is what I would like to do:
    1) Set up the Time Machine with a wireless network for a couple of "n" capable Macbook Pro's
    and
    2) Set up a separate network for some older "g" Powerbooks and of course the Playstation
    What would be the optimum way to set this up?
    Thanks

    hi
    i have a very similar environment and it works beautifully. just make sure both networks have the same name e.g. *"planet x"* and *"planet x (5GHz)"* and all are on same security and passwords etc.
    i control my iTunes lib on my MBP (n) or my Apple TVs (n) lib remotely from my iPod Touch (b/g) while streaming music to my ATV (connected to an amplifier) and 2 Airport Express (b/g). i also transfer files from my PB (b/g) wirelessly to an USB HD connected to my Extreme (n). both my machines back up with TM to the same TC - +everybody sees everybody+ so to speak.
    all of it works like a charm. THIS is what i wanted to be able to do for a very long time !
    thank you, apple ... (:-)

  • Two Separate Billing Documents created in the collec Billing through VF04

    Dear  Forum Friends,
    I am doing the collective Billing through VF04 for two deliveries (80015032 and 80015034) of the same day.
    When I am finding in VF05 it has been observed that Two Billing documents instead of one billing document have been created against the two deliveries.
    Could anybody guide where the problem is? I guess the problem is in Copy control but exactly what field is to be changed please guide me. I tried with the Data routine “003” and “007” but nothing happened.
    Regards,
    Jans

    Dear Jans
    If data from the related reference documents differs in the header fields of the billing document, the system will automatically split the invoice.  For example,  header datas like Payment Terms, Payer, Shipping Conditions etc differs, there will be invoice split.
    To find out the reason for split analysis, proceed as follows:
    Enter the number of the first billing document that you wish to compare.
    Choose Environment --> Split analysis.
    Enter the number of the second billing document which you wish to compare to the first in the dialog box.
    Enter the billing document number and choose Continue.
    The system displays the Billing document split analysis log. It is made up of three parts. The first shows the header partners and header fields which are different in the two documents while the second and third columns show the respective values for these fields.
    This provides you with a clear overview of which fields have differing contents, the information available, and why there was an invoice split.
    Thanks
    G. Lakshmipathi

  • I have just changed my router and whilst I can connect to  the router I can no longer air print on my hp 5524 which is also connecting to my router

    I have just had to change my router, which has resulted in my i pad and HPphotosmart 5524 not connecting even though both devices are connecting well to the router. My laptop on windows prints on wi fi perfectly.
    My previous router a 7 year old Netgear worked with the i pad but not this  new Huawei HG532.
    Is this the router or an Apple/HP issue. My network provider AOL/Talk Talk seem to want to point the finger towards the latter even though their old Netgear worked.
    They are ringing me back this afternoon and I would like some advise to back up my problem.

    You have to set the new SSID and Password on your printer to put printer and iPad on the same network. Run the CD again.
    Setup a typical HP AirPrint Printer
    1. Insert the CD into the CD drive of the computer, and then wait a few seconds for the software installer to start.
    2. Accept the installation agreements, and then click Next . It might take several minutes for your computer to install the printer software.
    3. You will be asked to connect printer to computer with USB cable
    4. You will be ask how you want to connect to printer, select Network (Ethernet/Wireless) and then click Next.
    5. Setup will access computer and router for wireless settings.
    6. Setup will ask if you want to use wireless settings (SSID and Password) to setup printer. Select Yes and press Next.
    7. Setup will then send wireless settings to printer.
    8. Once printer is setup, you will be ask to remove USB cable.
    9. The printer is now ready for AirPrint.

  • How to configure WRT350N as a router in a network wih a DSL modem/router

    Hi,
    I'll really appreciate if somebody please could give me some help.
    The problem is that I have a Dlink DSL-2640B modem/router AND a Linksys WRT350N router, what I want to do is how to configure them so they both are in the same network, and the WRT350N has access to internet and the computers connected to the DSL-2640B.
    Is that possible?....OR...the other option I was thinking was leave the DSL-2640B as a modem only, and have the WRT350 make all the routing wired and wireless.
    I'll really appreciate your comments.
    Regards.

    As per my knowledge it is better to use the wireless router to provide connection to wired & wireless computers. Leave the DSL2640B as a modem, connected to internet port on wireless router.

  • HT3728 Why does time capsule every day or so stop backing up? Wifi still seems to work. Time capsule is only a few weeks old and is connected via Ethernet to the router and iMac.

    Why does time capsule go missing from the network. The green light is lit at all times. I am unable to use the software the only thing I can do is power cycle time capsule, by unplugging and plugging the mains back in.
    My time capsule is only a few weeks old, any ideas?
    I am new to apple products very impressed with iPhone 5, I pad, iMac. Really not sure about time capsule!
    Thanks

    An external drive is much more reliable.. the issue has to do with network connection and loss of something.. although I am sorry I cannot tell you exactly what. The computer is still connected, still works on internet but has actually lost the hard disk.. lost and cannot find it without a restart.
    If you want to try a few changes it can help.
    1. If you are connected by ethernet make sure wireless is off in the imac.. having only one network connection is better than two.
    2. Redo the TC setup with all short names.. no spaces.. pure alphanumeric. Apple has these long names with spaces and characters like apostrophe by default but they are not a help.
    3. If the TC is the main router then reduce the dhcp lease time.. make it 20min.. that keeps everything refreshed and up to date.
    None of those fix it but they may help stretch out the interval.

Maybe you are looking for