Router based activity  and method call issue

Hi All
Iam presently working of Router based task flow(Bounded task flow) and page fragments
here in above router based task flow i have used the method call.
In above method call i return status ,and on basis of that status i redirect it to success page or error page(the success and error page are page fragments i.e. .jsff page).
i have done the drag and drop of the above mentioned router based task flow in my jspx page in a facet as a region.
below is the code for the my jspx page
<af:region value="#{bindings.testtaskflowvalidations.regionModel}"
                       id="r1"/>but my problem is that the method call which i included in above router based ,that method is not called(method call is not being happened).
So what changes i need to make so that the method is being is called.
currently iam using jdevloper 11.1.1.4.0
Thanks and Regards
Bipin Patil.
Edited by: Bipin Patil on Jun 29, 2011 1:59 AM

Hi
iam not getting any kinds of server errors.
below is my router code
<?xml version="1.0" encoding="windows-1252" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
  <task-flow-definition id="ValidationTaskFlow">
    <default-activity id="__1">ValidationTask</default-activity>
    <managed-bean id="__25">
      <managed-bean-name id="__24">validationBean</managed-bean-name>
      <managed-bean-class id="__27">com.test.Validate</managed-bean-class>
      <managed-bean-scope id="__26">pageFlow</managed-bean-scope>
    </managed-bean>
    <router id="ValidationTask">
      <case>
        <expression>#{pageFlowScope.Validationstatus == 'true'}</expression>
        <outcome id="__2">success</outcome>
      </case>
      <case>
        <expression>#{pageFlowScope.Validationstatus == 'false'}</expression>
        <outcome id="__3">fail</outcome>
      </case>
      <default-outcome>fail</default-outcome>
    </router>
    <view id="validationsuccess">
      <page>/pages/main.jsff</page>
    </view>
    <view id="validationerror">
      <page>/pages/hashkeyvalidationerror.jsff</page>
    </view>
    <method-call id="ValidationStatusSupplier">
      <method>#{pageFlowScope.validationBean.onBeforePhase}</method>
      <outcome id="__9">
        <fixed-outcome>ValidateFlow</fixed-outcome>
      </outcome>
    </method-call>
    <control-flow-rule id="__10">
      <from-activity-id id="__11">ValidationTask</from-activity-id>
      <control-flow-case id="__12">
        <from-outcome id="__14">success</from-outcome>
        <to-activity-id id="__13">validationsuccess</to-activity-id>
      </control-flow-case>
      <control-flow-case id="__16">
        <from-outcome id="__15">fail</from-outcome>
        <to-activity-id id="__17">validationerror</to-activity-id>
      </control-flow-case>
    </control-flow-rule>
    <control-flow-rule id="__19">
      <from-activity-id id="__20">ValidationStatusSupplier</from-activity-id>
      <control-flow-case id="__23">
        <from-outcome id="__21">ValidateFlow</from-outcome>
        <to-activity-id id="__22">ValidationTask</to-activity-id>
      </control-flow-case>
    </control-flow-rule>
    <use-page-fragments/>
    <visibility id="__18">
      <url-invoke-allowed/>
    </visibility>
  </task-flow-definition>
</adfc-config>

Similar Messages

  • SIP trunk incoming and outgoing calls issue

    Hi Everyone,
    We recently installad a SIP trunk and terminated on CUBE and CUCM but we have issues on incoming and outgoing calls, When someone dial in from outside he keeps listening the dailing ring even after we pick up the phone and at the end the callers time exipres and call gets disconnected.
    For Dailing out, the dialed number rings and caller hear the dailing ring as well but if someone pick the phone it apprears that call is connected but no audio in it, dead air.
    Our call flow is as 
    IP Phones => CUCM --->SIPTRUNK--->CUBE=>SIPTRUNK=>SP
    I have attached the config for CUBE and debug ccsip messages output for both incoming and outgoing calls.
    Please if some help in sorting out this issue, Thanks in Advance
    Tasneem

    Inbound call>>>>
    The reason you are experiencing this is that your CUBE is requesting PRACK and your provider is not responding to it..
    Here we have your cube sending 180 ringing with "Require 100rel"..This was sent several times and your ITSP didnt respond probably because they do not support 100rel...(It is Huwaei after all, they do what they like)
    Sent:
    SIP/2.0 180 Ringing
    Via: SIP/2.0/UDP 10.205.20.50:5060;branch=z9hG4bKkpw18wp35hfw2c23h51ww6a8aT19871
    From: ;tag=sbc080552fph4hp-CC-25
    To: ;tag=256F3440-12C
    Date: Thu, 16 Jan 2014 13:31:34 GMT
    Call-ID: isbc6818c4kfhaa4ca1k5f8k1awsh52f1ccw@SoftX3000
    CSeq: 1 INVITE
    Require: 100rel
    RSeq: 2507
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
    Allow-Events: telephone-event
    Remote-Party-ID: "TEST STC" ;party=called;screen=yes;privacy=off
    Contact:
    Record-Route:
    Server: Cisco-SIPGateway/IOS-15.2.4.M2
    Content-Length: 0
    AFter the CUBE didnt get any response, it then replied with Gateway Timeout...
    Jan 16 13:31:54.550: //31880/5A4406E48184/SIP/Msg/ccsipDisplayMsg:
    Sent:
    SIP/2.0 504 Gateway Timeout
    Via: SIP/2.0/UDP 10.205.20.50:5060;branch=z9hG4bKkpw18wp35hfw2c23h51ww6a8aT19871
    From: ;tag=sbc080552fph4hp-CC-25
    To: ;tag=256F3440-12C
    Call-ID: isbc6818c4kfhaa4ca1k5f8k1awsh52f1ccw@SoftX3000
    CSeq: 1 INVITE
    Reason: Q.850;cause=102
    Content-Length: 0
    I suggest you disable this parameter..and test again
    voice service voip
    sip
    rel1xx disable
    Please rate all useful posts
    "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"

  • Is anybody having drop-out and dropped call issues?

    hi
    i'm on my second 8gig iphone and am still having (after 2days) horrible drop-outs on almost every call and dropped calls. the signal is showing full strenght-4bars while this is happening. any ideas? my previous cell (blackberry on att) had perfect reception at all times at same location. drove through the neighborhood this afternoon and same thing. i areas where i used to get perfect reception i now get drop-outs.
    thx,
    mk

    you are correct - hence my previous post that my att reception on my previous phone - a blackberry in exact same locations - was perfect. on the other hand i think this must be an isolated incident of bad luck receiving 2 phones in a row that have bad reception. i met at least 10 people at the apple store on friday night that live in my area (within 1/2 mile) and nobody has complained (so far) about reception issues and dropped calls.
    mk

  • SetBackground and basic class and method calling stuff

    A few days ago I posted a thread about some paint problems. I was then told I was a bad programmer :P So I've read up a little on the subject. Hope this code looks better then the last (event though it's not as "complete" as the last one was).
    Now I've got a few new problems though.
    // Java Document
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    public class Diamonds2 extends JFrame{
        public static void main(String[] args) {
            JFrame f = new JFrame("Diamonds 2");
            f.addWindowListener(new WindowAdapter() {
                public void windowClosing(WindowEvent e) {
                    System.exit(0);
            Container panel = new DiamondsPanel();
            f.getContentPane().add(panel, BorderLayout.CENTER);
              Container statusPanel = new DiamondsStatusPanel();
              f.getContentPane().add(statusPanel, BorderLayout.PAGE_END);
              f.setBackground(Color.black);
            f.pack();
              f.setResizable(false);
              f.setVisible(true);
              Game d2 = new Game();
              d2.game();
    class DiamondsPanel extends JPanel {
         public static int BallRadius = 16;
         public static int posx = 100;
         public static int posy = 1;
        public DiamondsPanel() {
            super();
            setOpaque(false); // we don't paint all our bits
            setLayout(new BorderLayout());
            setBorder(BorderFactory.createLineBorder(Color.black));
        public Dimension getPreferredSize() {
            Dimension panelSize = new Dimension(800, 580);
              return panelSize;
        protected void paintComponent(Graphics g) {
              super.paintComponent(g);
            Dimension size = getSize();
              // set color
             g.setColor (Color.red);
             // paint a filled colored circle
             g.fillOval (posx, posy, BallRadius, BallRadius);
         public void updateGamePanel() {
              posy--;
              repaint();
    class DiamondsStatusPanel extends JPanel {
         public DiamondsStatusPanel() {
              super();
              setOpaque(false);
              setLayout(new FlowLayout());
              setBorder(BorderFactory.createLineBorder(Color.black));
         public Dimension getPreferredSize() {
            Dimension panelSize = new Dimension(800, 20);
              return panelSize;
        protected void paintComponent(Graphics g) {
              super.paintComponent(g);
    class Game {
         public void game() {
              while(0 < 10) {
                   try {
                        Thread.sleep(10);
                   }     catch (InterruptedException e) {}
              //     System.out.println("Something is happening");
    }I can't set the background. I've tried to apply setBackground color to the constructors of each of the panel classes too but that won't work either.
    Secondly. How should I do the animation (the red circle should move) now. I knew how to do it before but with this new structure (I found in some swing tutorial) I can't figure it out. I've tried intializing a thread in the class Game since it couldn't be done (according to the compiler) in main. Also, before I could use isVisible() to run the while-loop now that didn't work either and I suppose using 0 < 10 is not a very good way to do it. I also made an update method in the DiamondsPanel class but I don't know how to call it. I understand I'm not doing this as it should be done. I also can't find any place that makes me understand how to do it :P
    Any answers will be welcomed with open arms (except mean ones xD).
    Thanks alot

    Styrisen wrote:
    I got the background to work.. really don't know what I did. It works thoughGreat
    So should the code for animating the ball be inside the DiamondsPanel class? Or where should it be?This is one of the crucial questions when developing an OOP app: what objects to create and what code goes where? I have not done animations, but I believe that there is a 2D forum here in the Sun forums. You might consider asking this over there (but if you do, please be sure to have each thread reference the other so as to avoid duplication of effort from the volunteers who help).
    How should the code look like? Should I use runnable? You're definitely going to need to use separate threads. That much I'm sure of.
    Should I make an infint loop? No.
    Should I use a timer class? Probably.
    Is it a bad idea to divide the panels into classes?Not only is it not a bad idea, it may be a good one.
    Good luck!
    Pete

  • Airport Express (Model with 802.11G +54MBPS Mac/PC and Set Up Issues

    Hi,
    We have a 4 Mac and 1 PC Household. Cable Internet Service by Roadrunner.Cable model (owned) connected to a D-Link 802.11G wi fi router (by ethernet from cable modem)in the family room , then out to a Imac (the half moon base and LCD screen with a airport card also in the family room and the closet computer to the D-Link
    router, (we did add a D-Link antenna to the router ? about 10 months ago (a D-Link ANT24-0700 (Version 1.2)and a HP 4 in 1 printer attached via USB to the Imac
    ,a eMac 1.25 ghz 1Gb ram with airpot card also connected wirelessly (no printer attached on the same floor but in a ajoinging room about 20 feet from the Router, and another eMac 1.0 Ghz 1Gb ram with airport card in the upstairs part of our house (a bedroom) and no issue with Internet connection (it has a Epson 3in 1 printer attached via USB, and a MacBook Pro with 802.11N wireless card in side , bought for a Christmas/Birthday Present and also for college.It to has no issues with the Internet where ever it may be in the house. Our sole PC a HP tower with a added D-Link WDA -2320 Range Booster Desktop Adapter (802.11G) and we added a D-Link Antenna same model as the other a ANT24-0700 to help with Internet access which it did as well as adding some ram to increase page loading time etc. It does not have a printer attached. I will get to the Topic Area now
    The Airport Express. I was not involved in the set-up as I was laid up due to a bad back and post major knee surgery , But I always (especially recently) wondered why the light was amber and blinking. I read through the manual and also
    Apple.com support and MacFixit.com (which is under construction and moved to part of Cnet.com)and then went to the Airport Express Discussion area (sorry for being so wordy) I need a Twitter account to post!) We have a network name for the D-Link and the computers all were added and it also supports a Xbox 360, a Sony PlayStation 3 and a Nintendo Wi (in online use without issue) but..
    A network was also as it appears to myself) for the Airport Express and under the half moon bars showing connection strenght (there is our D-Link network "phoenix" with security protection WPA2 I believe) as I have set up the router, We had a Apple Base station prior that was ? 802.11B (a half moon white unit) still have it in the box ) So for normal daily use, checking e-mail and internet use all of the computers use the "phoenix" or D-Link supported Router 802.11G
    and The other network calld Apple Network with numbers and letters after it (and hopefully security) password is unknown , The Airport Express is set up connected via USB to a HP B&W laser printer which has saved quite a bit of money on ink, To utilize that printer you must switch from "phoenix" The D-Link router network to the Apple Network (followed by letters and numbers) The Imac and the eMac in the family room and a ajoing room (after switching to the Apple Network
    can than print to the lasr printer. The eMac upstairs and the HP Windows XP Professional software can not print to the laser printer (yet the HP PC shows it as a individual network and a strong signal, equal to the Internet connection from the D-Link, and the eMac (after switching under the half moon (not the proper name I am sure) to get to the Apple Network to print , it will not print, yet it shows a 5 bar signal, same as the D-Link connection. I do believe we have two seperate networks (but do not understand why the two Mac's in the family room can print to the laser printer by simply switching networks and then file and print. ** One other 9probaly major item is that it states to set up the Airport Express with a Mac With OSX 10.4 or later (at the time of set up, we had the Imac and two eMac's all running Panther OSX 10.3.9 9which they continue to have installed) We obtained the HP Tower and Monitor and HP 4in 1 printer ust before Christmas in 2008 and the MacBook Pro in Mid December 2009 (current model and running Snow Leopard 10.6. The HP Tower runs Windows Xp Professional (Service Pack 3) so the MacBook Pro which is much more mobile , could be used to do the set-up, or the HP Tower coulf be moved temprarily, I do recall if Router changes (at least with The D-Link You need to be connected by Ethernet to the Mac
    that would be doing the set up/configuration of the router (and it runs OSX 10.3.9 and is a older Mac (with 80Gb Hard drive that is partioned for OS9 and OSX as well , it is under a Ghz processor wise and less than 1 Gb of ram as the last ram slot required a seal to be broken and 256mb of ram (?) could be added
    it has 768 mb of ram but knock on wood running well. We use Lacie external drives
    on the Imac and both eMac's and need to get external drives for the HP PC as well as the Mac Book Pro (15" screen)
    I apoogize if I repeated myself, and rambled but I wanted to (in one post) to explain our set up and network configuration
    Questions
    1) if indeed it is that the two networks is true and a set yp that is not correct
    can the Airport Express be configured without opening up the router (when ever that happens it seems one computer is unable to get online and each time its a differnt one a Mac or veen the PC
    The PC under My Computer and Networks clearly shows the wto distinct and seperate netwoks with strong signals and the distance is not far (it is through a floor as the other emac and the PC are upstairs and cabling by ethernet is not a option
    2) If I need to open the router would I add the Airport Express as a client as if it was one of the computers or gaming systems on the network? (adding the Mac adress or IP address (not sure how you find the Mac address) and its been while since the router was opened up for any additions or work on it.
    3) would it be on the same channel as the router or not ?
    4) Hopefully with proper configuration the light will stay on (and green) on the A/E and the eMac and HP PC will be able to print to the laser printer. Currentlt
    when anything needs printed from the PC its put on a Flasg Drive and plugged in tothe Imac and the the Apple Network is selected and data printed, The eMac upstairs has the option of using the attached Epson 3 in one or doing the Flash stick work around.
    I would be verya appreciative if some one took a look at the set up above and advised me of what is right, what is not right* and what to do to fix things up
    I would imagine after proper set up, delete the Apple Network from the PC and eMac upstairs and ? all of the computers as we should have one base station (the D-link and the spoke (the A/E connected by UBS to the A/E (it may be ethernet but the cable connection from the A/E to the HP laser printer is correct (the rest of the A/E set up ... Please , tell me where it is and where it should be
    and ? any idea why we can print to the laser printer down stairs and not up stairs ? it did mention printer set up with Panther as possible, page 43 of themanual we have un chaper 5 Tips and Troubleshooting (under whn your printer isn't responding) (we do not have the interfereance listed in the manual,
    our phones are land line, one 900 mghz and the others 5.8 ghz
    It is possible to move the A/E and laser printer if that would help the two computers (desktops) upstairs) bt the distance is way less than 150 but their is a floor and ? duct work (metal ) but I think here is a place to stop typing and let some of the experts on the discussion forums take a look.
    one lst note (as the lap top will be going off to college in the fall (runnning Snow Leopard, and the other 3 Mac's run Panther OSX 10.3.9 should the HP PC windows Xp Professional be the computer to set up the air port express and the Airport Utility proram installed & would this conflict with the current Router (set up by a Macc running OSX 10.3.9 (Panther) i.e (should both set ups be on the same computer?) but actually aThe D-Link is OSX10.3.9 compatible (and 802.11G) and set up requires ethernet connection to a Mac (You type in the numbers and . etc and password as administror and you are in, or should the admin be on the same cpmpuer for the router and A/E ?
    (and considering a Airport Extreme Base Station as well as dual frequency simulataneus and 802.11N (for the laptop now) and future, or wait. The 802.11
    in theory would broadcast farther..?? even if computers had 802.11b(our Mac Desk tops and the PC 802.11B card
    Thanks Again!!!
    Many, Many Thanks
    amnienttales

    William Boyd Jr.
    Hello again,
    D-Link Router is model DGL-4300 (along with a D-Link ANT24-0700 Omnidirectional
    7dbi Antenna . Our Cable Internet ISP (Roadrunner) provides consumers with dynamic ISP address's . All Mac's have Airport Cards and The Hp Tower XW4550 has a D-Link Rangebooster G Desktop Adapter WDA-2320 (also with a D-Link ANT24-0700 Omnidirectional 7 dbi Antenna (the PC OS is Win XP Pro Service Pack 3) The 3 desktop Mac's run OSX Panther 10.3.9 , The 15" MacBook Pro OS is OSX 10.6 Snow
    Leopard (not sure what is after the .6 (right now) D-Link's website is
    http://www.dlink.com , I have configured this router multiple times in the past.
    also added as clients on the network (Utilizing the D-Link Router) are a X-Box 360, Sony Play Station PS3, and a Nintendo Wii all of which have on line ability
    and enables online video game play with any one online.
    As mentioned prior the Airport Port Express is Model A1084 Part No. M9447OLL/A
    which is USB conected to a HP LaseJet B&W , model 1020 and some how the two computers near it can switch to the Airport Express Network from the D-Link Router based Network and print wirelessly to the A/E connected LaserJetPrinter
    I realize I will need to reconfigure the D-Link Router and add the A/E as a client. I will try first to use the Airport Utility and see if I can do anything
    Utilizing it (adding it to the D-Link network, I think its unlikely but worth a try but* the password is unknown but I have a few guess's as to what it may be.
    I do have the necessary admin and network paswwords to cconfigure the D-Link Router,
    1) * If the the A/E Utility experiment fails and I need to re-configure the router * do I need to (as per the Airport Express Set Up Guide (Use a Mac with OSX 10.4 or later or a PC with Win Xp Home or Professional (have a desk top PC that has the specs) and The Mac Book Pro meets the Mac Spec's)
    If I can not get a password to work on the A/E I would reset it using the reset button
    And before plugging in the A/E , connect the appropraite cables in our case a USB cable to the LaserJet Printer then plug in the A/E
    2) I would then connect by Ethernet from Either the Mac Laptop or The PC to the D-Link router (if not the router will not set-up correctly)
    3) The one question that puzzles me is that we are not using the A/E as a base
    but a client
    in two sections(Using Airport Express , connecting a Printer via USB
    and use Airprt Utility to create a new network or join a new newWireless computers using Mac OSX 10.2.7 (Tiger) or later or a PC with Windows XP and it then goes in to the steps of ising the printer for both a Mac and a PC (using Bonjour on the CD that came with the A/E (this appears to contradict needing to use Mac OSx 10.4 or a PC with Win Xp set the A/E up for use as a printer
    (joiing a new network or existig one)
    And in Chapter 5 Tips and Roubleshooting= Your Airport Express Status Light Flashes amber & Your Printer is not responding (it is flashing amber and the printer does not respond to the two computers upsstairs (one Mac running OSX 10.3.9 & One PC running WinXp and its states to make sure the printer is selected
    in the Printer list o client computers, to do this on a Mac using OSX 10.3 or later , open Printer Set Up Utility and follow steps and if a PC with Windows XP , Open Printers and faxes and then follow steps
    in Closing ? can I configure the A/E Utility with a Mac using 10.3.9 as above or
    ? Per Chapter 1 Getting Started use a Mac with OSX 10.4 or later or a PC with Windows Xp Home or Professional
    Perhaps I am taking the tips and trouble shooting and Printer Set up out of context or does the getting Started Computer specs contradict them or are they
    for use if the A/E was going to be a Base Station and not a client..
    Will keep at it,
    ambienttales

  • Native - Java Method Call problem - "Wrong Method ID..."

    I am writing a 3d game engine using c++, with all the game logic code in Java, for the purpose of making the thing extendible, easily modifyable, etc...
    I am using J2SE JDK 1.2.2.
    Most things work fine (engine-wise), but i have a few questions about problems i am having getting the JNI to work correctly with calls to Java Methods.
    1. If I use FindClass() to get a jclass reference to a named class, I get one number back. If I then instantiate this class, and then call GetObjectClass() with the instance, I get another number, **which doesnt appear to work for anything**. What is going on here? Can the JVM give different jclass numbers for the same class? Is GetObjectClass() supposed to work?
    2. Is AllocObject() alright for instantiating Java objects? It does seem to allocate memory, and method calls work to the new object. I am aware that it doesn't call a constructor, but I like that, seeing as the initialization is handled through a different [network-synchronized] means.
    3. Using a jclass retrieved using FindClass(), which I store in a global variable, I am able to call methods on an instance that I created in a certain function. I then make sure (?) that the GC can't reclaim the class or object memory by getting a NewGlobalReference to both of them [just to be safe]. However, in a later function, I am unable to call methods using my stored method IDs, ["Wrong Method ID....JVM has been asked to shut down this application in an unusual manner..."]. I am also unable to acquire new methodIDs, as the system returns 0xCCCCCCCC for all method ID queries. Obviously, attempting to use those bogus method IDs results in a JVM crash, in a segment called [2 deep in the untraceable depths of JVM.dll] from the JNI CallVoidMethodV() function. Why is this happening? Is the GC getting in there despite my best efforts? Is it illegal to cache methodIDs, jclass references or jobject references? aaarrggh! :)
    Thanks
    Chris Forbes
    Lead Programmer
    Sprocket Interactive
    [email protected]

    Hi Chris,
    I hit the same sort of problem, when writing a JVMDI ( VM debugger hook ), in C++.
    My question remained unanswered too
    http://forum.java.sun.com/thread.jsp?forum=47&thread=461503&tstart=30&trange=30
    I didn't try a call to NewGlobalRef, as you did... but it sounds like it could be what I was missing.
    I've a couple of ideas, but nothing definite for you.
    1) maybe there's more than one classloader, so that multiple copies of the class are loaded
    2) ensure you're compiling your DLL with "quad-word" ( 8 byte ) alignment.
    Otherwise all your JNI references will be misaligned !
    Since the JNI reference maps to a C++ pointer, it's possible that you can't cache any JNI references.
    That's my vague feeling on the subject.
    As a workaround, you may have to keep requesting any JNI references, eg. jclass & jmethod's, as you need them.
    regards,
    Owen

  • 11g Task flow - Method call with router Issue

    Hi, I am using bounded task flow method call - which is default activity. The outcome of method call will go to a router and that decides which method/page fragment has to be selected. But when ever i try to call the default activity only the default out come of the router (Page fragment) is shown in the jspx. When click on some button which is binded with the default activity - the task flow is not working as i expected. Pls find the code of my task flow below.
    <?xml version="1.0" encoding="windows-1252" ?>
    <adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
    <task-flow-definition id="methodcall2task-flow-definition">
    <default-activity>initiatetaskflow</default-activity>
    <data-control-scope>
    <shared/>
    </data-control-scope>
    <input-parameter-definition>
    <name>methodname</name>
    <value>#{CompanyBean.methodname}</value>
    </input-parameter-definition>
    <managed-bean>
    <managed-bean-name>CompanyBean</managed-bean-name>
    <managed-bean-class>com.boeing.seds.view.company.CompanyBean</managed-bean-class>
    <managed-bean-scope>request</managed-bean-scope>
    </managed-bean>
    <method-call id="initiatetaskflow">
    <method>#{CompanyBean.test}</method>
    <outcome>
    <fixed-outcome>#{CompanyBean.methodname}</fixed-outcome>
    </outcome>
    </method-call>
    <router id="selectMethod">
    <case>
    <expression>#{CompanyBean.methodname eq 'default'}</expression>
    <outcome>default</outcome>
    </case>
    <case>
    <expression>#{CompanyBean.methodname eq 'addcompany'}</expression>
    <outcome>addcompany</outcome>
    </case>
    <case>
    <expression>#{CompanyBean.methodname eq 'gotoAddress'}</expression>
    <outcome>gotoAddress</outcome>
    </case>
    <case>
    <expression>#{CompanyBean.methodname eq 'gotoDist'}</expression>
    <outcome>gotoDist</outcome>
    </case>
    <default-outcome>gotoAddress</default-outcome>
    </router>
    <view id="default">
    <page>/includes/company/default.jsff</page>
    </view>
    <view id="addnewcompanyFrgmt">
    <page>/includes/company/addnewcompanyFrgmt.jsff</page>
    </view>
    <method-call id="methodCall1">
    <method>#{CompanyBean.addCompany}</method>
    <outcome>
    <to-string/>
    </outcome>
    </method-call>
    <view id="supplierAddressFrgmt">
    <page>/includes/company/supplierAddressFrgmt.jsff</page>
    </view>
    <view id="supplierDistributorFrgmt">
    <page>/includes/company/supplierDistributorFrgmt.jsff</page>
    </view>
    <control-flow-rule>
    <from-activity-id>initiatetaskflow</from-activity-id>
    <control-flow-case>
    <from-outcome>#{CompanyBean.methodname}</from-outcome>
    <to-activity-id>selectMethod</to-activity-id>
    </control-flow-case>
    </control-flow-rule>
    <control-flow-rule>
    <from-activity-id>selectMethod</from-activity-id>
    <control-flow-case>
    <from-outcome>default</from-outcome>
    <to-activity-id>default</to-activity-id>
    </control-flow-case>
    <control-flow-case>
    <from-outcome>addcompany</from-outcome>
    <to-activity-id>methodCall1</to-activity-id>
    </control-flow-case>
    <control-flow-case>
    <from-outcome>gotoAddress</from-outcome>
    <to-activity-id>supplierAddressFrgmt</to-activity-id>
    </control-flow-case>
    <control-flow-case>
    <from-outcome>gotoDist</from-outcome>
    <to-activity-id>supplierDistributorFrgmt</to-activity-id>
    </control-flow-case>
    </control-flow-rule>
    <control-flow-rule>
    <from-activity-id>methodCall1</from-activity-id>
    <control-flow-case>
    <from-outcome>goAddNew</from-outcome>
    <to-activity-id>addnewcompanyFrgmt</to-activity-id>
    </control-flow-case>
    </control-flow-rule>
    <use-page-fragments/>
    </task-flow-definition>
    </adfc-config>
    Kindly let me know what may be the issue and help me to resolve it.
    Thanks!
    Sankari Kannan

    Hi Sankari,
    Since after the initial method call, your control flow has the router as its next stop, the //method-call/method/outcome/fixed-outcome can be set to a literal value(go to router) instead of an EL.
    And let router decide where to go next(by EL).
    Or you can discard your router activity, let the method-call activity decide where to go directly by setting //method-call/method/outcome/to-string to "true". Then the return value of the method decide the next stop.
    Todd

  • Text messages and phone calls from March 2012 to date are missing after activating iphone5

    text messages and phone calls from March 2012 to date are missing after activating iphone5. I backed up my 4 before activating my 5. Can i retrieve them somehow?

    i would not want to bet on nokia ever releasing a patch or update in the software to allow this function on this particular phone.
    if you look at nokia phones over the years, they have added functionality like this across a wide range all at once, take for example timed profiles on symbian phones. these have only just been phased in.
    i do not think it is a development cop out, more along the lines that nokia is a huge company and as such would have a huge effor in market research. if they didnt pick this out through their market researc, why spend the money adding it?
    the comment on annoyance is entirely personal to me, as it is important to you - you may want to consider moving to a symbian (series 60) based handset as these give you a lot of expansion for this sort of need.

  • 11gR2 error: call a bounded task flow with method call as default activity

    hi all,
    We migrated several applications to the JDev 11g R2.
    There are 2 applications that contain a bounded task flow where we define Method Call as default activity.
    We need invoke specific actions before opening the page.
    They run well with 11gR1.
    But with *11G R2*, I can’t call directly this task flow with the following URL:
    http://127.0.0.1:7101/MyAPP/faces/adf.task-flow?adf.tfId=my-flow-def&adf.tfDoc=/WEB-INF/flows/my-flow-def.xml
    Message:
    *<SecurityUtils><invokeURLAllowed> ADFc : impossible to call directly the task flow '/WEB-INF/flows/ my-flow-def.xml #my-flow-def' with the help of URL*
    (original message: <SecurityUtils><invokeURLAllowed> ADFc : impossible d'appeler directement le flux de tâches '/WEB-INF/flows/ my-flow-def.xml #my-flow-def' à l'aide de l'URL.)
    Any idea?
    Thanks for you help

    Hi,
    Have a look at the task flow properties, in PatchSet1, a new feature "invokeURLAllowed" is added that prevents bounded task flows from being URL accessible for security reasons. You can swithc this feature on and off
    Frank
    Ps.: I though that bounded task flows that you call from a URL generally needed to have a viewActivity as the default activity

  • Incomng and Outgoing calls are stop routing every five min

    Dear Team,
    Please find the attached running config and logs.Incoming and outgoing calls are landing on the gateway properly. But call stop working every five min.PRI is up and no error on controller E1.
    Please advise how to identify the issue?
    CUCM version 4.2
    debug isdn q921
    *Sep  2 08:48:21.874: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=2 nr=34
    *Sep  2 08:48:21.890: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=3
    *Sep  2 08:48:21.942: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=34 nr=3
    *Sep  2 08:48:21.942: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=35
    *Sep  2 08:48:27.866: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=35 nr=3
    *Sep  2 08:48:27.866: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=36
    *Sep  2 08:48:34.322: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=36 nr=3
    *Sep  2 08:48:34.322: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=37
    *Sep  2 08:48:34.326: %ISDN-6-CONNECT: Interface Serial0/0/1:27 is now connected to 0503726912 N/A
    *Sep  2 08:48:34.326: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=3 nr=37
    *Sep  2 08:48:34.342: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=4
    *Sep  2 08:48:39.694: %ISDN-6-DISCONNECT: Interface Serial0/0/1:29  disconnected from 0094777382372 , call lasted 181 seconds
    *Sep  2 08:48:39.698: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=4 nr=37
    *Sep  2 08:48:39.706: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=5
    *Sep  2 08:48:39.730: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=37 nr=5
    *Sep  2 08:48:39.730: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=38
    *Sep  2 08:48:39.734: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=5 nr=38
    *Sep  2 08:48:39.746: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 voice-port 0/1/2
    *Sep  2 08:48:49.746: ISDN Se0/0/1:15 Q921: User TX -> RRp sapi=0 tei=0 nr=38
    *Sep  2 08:48:49.758: ISDN Se0/0/1:15 Q921: User RX <- RRf sapi=0 tei=0 nrsh
    *Sep  2 08:48:59.762: ISDN Se0/0/1:15 Q921: User TX -> RRp sapi=0 tei=0 nr=38
    *Sep  2 08:48:59.766: ISDN Se0/0/1:15 Q921: User RX <- RRf sapi=0 tei=0 nr
    *Sep  2 08:49:01.946: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=38 nr=6
    *Sep  2 08:49:01.950: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=39
    *Sep  2 08:49:01.950: %ISDN-6-DISCONNECT: Interface Serial0/0/1:27  disconnected from 0503726912 , call lasted 27 seconds
    Voice-Gw#
    Voice-Gw#
    Voice-Gw#
    Voice-Gw#
    *Sep  2 08:49:01.954: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=6 nr=39
    *Sep  2 08:49:01.962: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=7
    *Sep  2 08:49:02.034: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=39 nr=7
    *Sep  2 08:49:02.034: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=40
    controller E1 0/0/1
     pri-group timeslots 1-31
    interface Serial0/0/1:15
     no ip address
     encapsulation hdlc
     isdn switch-type primary-net5
     isdn incoming-voice voice
     no cdp enable
    =======================
    Voice-Gw#
    *Sep  2 08:55:25.214: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=71 nr=27
    *Sep  2 08:55:25.214: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=72
    *Sep  2 08:55:25.234: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=27 nr=72
    *Sep  2 08:55:25.246: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=28 nr=72
    *Sep  2 08:55:25.250: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=28
    *Sep  2 08:55:25.258: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=29
    *Sep  2 08:55:27.518: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=72 nr=29
    *Sep  2 08:55:27.518: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=73
    *Sep  2 08:55:27.522: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=29 nr=73
    *Sep  2 08:55:27.534: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=30
    *Sep  2 08:55:27.546: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=73 nr=30
    *Sep  2 08:55:27.546: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=74
    *Sep  2 08:55:33.318: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=30 nr=74
    *Sep  2 08:55:33.330: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=31
    *Sep  2 08:55:33.390: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=74 nr=31
    *Sep  2 08:55:33.394: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=75
    *Sep  2 08:55:37.190: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=75 nr=31
    *Sep  2 08:55:37.194: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=76
    *Sep  2 08:55:38.534: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=76 nr=31
    *Sep  2 08:55:38.534: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=77
    *Sep  2 08:55:38.538: %ISDN-6-CONNECT: Interface Serial0/0/1:27 is now connected to 0504312690 N/A
    *Sep  2 08:55:38.538: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=31 nr=77
    *Sep  2 08:55:38.554: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=32
    *Sep  2 08:55:42.542: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=32 nr=77
    *Sep  2 08:55:42.554: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=33
    *Sep  2 08:55:42.606: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=77 nr=33
    *Sep  2 08:55:42.606: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=78
    *Sep  2 08:55:46.766: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=78 nr=3
    % Invalid input detected at '^' marker.
    Voice-Gw#sh controllers e1 0/0/1
    E1 0/0/1 is up.
      Applique type is Channelized E1 - balanced
      No alarms detected.
      alarm-trigger is not set
      Version info Firmware: 20060711, FPGA: 13, spm_count = 0
      Framing is CRC4, Line Code is HDB3, Clock Source is Line.
      CRC Threshold is 320. Reported from firmware  is 320.
      Data in current interval (99 seconds elapsed):
         0 Line Code Violations, 0 Path Code Violations
         0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
         0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
    Voice-Gw#
    Voice-Gw(config)#do sh isdn statu
    Global ISDN Switchtype = primary-net5
    ISDN Serial0/0/0:15 interface
            dsl 0, interface ISDN Switchtype = primary-net5
        Layer 1 Status:
            DEACTIVATED
        Layer 2 Status:
            TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
        Layer 3 Status:
            0 Active Layer 3 Call(s)
        Active dsl 0 CCBs = 0
        The Free Channel Mask:  0x00000000
        Number of L2 Discards = 0, L2 Session ID = 0
    ISDN Serial0/0/1:15 interface
            dsl 1, interface ISDN Switchtype = primary-net5
        Layer 1 Status:
            ACTIVE
        Layer 2 Status:
            TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
        Layer 3 Status:
            3 Active Layer 3 Call(s)
            CCB:callid=E3C0, sapi=0, ces=0, B-chan=30, calltype=VOICE
            CCB:callid=E3C6, sapi=0, ces=0, B-chan=31, calltype=VOICE
            CCB:callid=E3CB, sapi=0, ces=0, B-chan=29, calltype=VOICE
        Active dsl 1 CCBs = 3
        The Free Channel Mask:  0x8FFF7FFF
        Number of L2 Discards = 0, L2 Session ID = 2
        Total Allocated ISDN CCBs = 3

    Hi.
    Can you please also attach a CUCM trace during a disconnected call?
    Thanks
    Regards
    Carlo

  • Calling Classes and Methods in Transformation Rules

    Hi,
    I have transformations from Level 1 to Level 2 ODS where based on the source fields Date of Sale(ZDSALE) I have to derive Period to Date and Year to Date from the class ZBI_UTILITY_METHODS and method ATTRIBUTES_GET.  How do i incorporate this in my start and transformation routines. Can someone please give me the code for this and also give some sample codes where classes and methods are called in the transformation rules.
    Thanks
    Priya.

    Hi Priya,
    I suggest you the way to call method in the class like this:
      DATA: o_model          TYPE REF TO ZBI_UTILITY_METHODS.
    " define v_return variables based on type the method give the value
      CREATE OBJECT: o_model.
      v_return = o_model->ATTRIBUTES_GET( transfer parameter ).
      free o_model.
    Hopefully it can help you a lot.
    Regards,
    Niel.

  • Default Activity Method call in TF not executing (in ADF Lib)

    Hi,
    We have created a ADF Lib of a reusable task flow.
    The Task Flow contains two activities
    (i) A method call {which is default activity and this method belongs to a datacontrol}
    (ii) A view activity (which is a jsff)
    Now everything works fine if I am using the TF as a region in same project.
    But if I create a ADF Lib of it and implement the same to other application (the new application have same datacontrol and method) the default activity "which is method in our case" is not getting executed, rather the jsff executes first.
    I am using Jdev 11.1.1.4
    Thanks.

    Hi Frank,
    Thanks for reply.
    But, I have provided the same functionality to DataControl, which was working for TF included project.
    Apart from that, program control didn't visit the the default activity method body, hence its sure that it never got executed.
    Is there any way I can trace it !!

  • Hi. I have the ipad 4 and have got a Vodaphone ( India) data sim, however it does not seems to work. The CS support at the gallery and the call center is lousy as they dont seem to know what they are upto. Although the sim is active i am unable to surf.

    hi. I have the ipad 4 and have got a Vodaphone ( India) data sim, however it does not seems to work. The CS support at the gallery and the call center is lousy as they dont seem to know what they are upto. Although the sim is active i am unable to surf. The vodaphone number is
    9168554687. Please assist

    Since this is a carrier issue, we are probably not going to be able to help you. You are paying for this service, so be assertive when you call customer service.

  • My phone won't let me make a call, I have it activated and also used the 45 dollar plan and it still tells me to enter a phone number...What can I do to get it to work?

    If someone can please help me I am a new user to this phone and Verizon.  I got to so that I could call my son and mom long distance, but it won't let me make the call.  It is activated and has the 45 dollar plan on it.  I really want it to work and not be a waste of money. 

    I'm sorry you're having troubles making calls, cnasam. From the phone, please try dialing *228 [send], option 1 to program. When completed, restart phone. If this doesn't work, please reach out to PrePay directly at 888-294-6804 and select options 4,6,4 for prompt service.   Thank you, VanessaS_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Issue with a method call in a TaskFlow (works 2 times instead of 1)

    Hi guys,
    i'm using jdev11.1.1.1.2.0 and the integrated weblo or remote weblo 10.3.2.0.
    I'm encountering a problem with a method call which is invoked inside a Task Flow.
    Let me tell us the details of :
    I'm invoking a method call which is part of a Task Flow from the backingbean of the view which is placed before the method call in the taskFlow diagram.
    AN outcome String from the method of the backing bean allows to navigate to the method of the Task flow.
    The method call is called and works normally BUT MY PROBLEM IS THAT THE METHOD IS CALLED TWO TIMES SO THE RESULT IS FALSE.
    For information, the second time the method is called it takes care of the result when it is invoked the first time. So its parameters are updated and are a little different from the first time to the second time.
    NB : This method consists of inserting a row in the database. My result is 2 rows inserted instead of one.
    Thanks for help for this strange behaviour

    Hi
    create a temp calculated column
    =IF(ISBLANK([Duration]),"",[Item Start Date]+([Duration])
    and check if it's working OK
    Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

Maybe you are looking for