Router Bridge Issue

Another user asked me why routers need to be bridged. I did not have an intelligent answer. It is my understanding that 'bridge mode' nullifies the feature of the router. Guidance sought

#1 They can do that.
I point to
http://www.dslreports.com/faq/13600
#2 Do thet have to: No, but there will be issues.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Similar Messages

I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help

I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help.
They said I need to change my settings to NAT settings. I haven't been able to figure out or find anything. I have also spoken to Apple Support on the phone for hours without being able to figure out how to do this ( i don't think he knew much either lol.) Please help me because I've got about 15-20 devices in my house that require to be connected to the internet and this is just making things ridiculously slow and painful for me.
Thanks!

It is on DHCP & NAT under router mode yet my isp is still the one issuing ip addresses to my devices instead of the router issuing them

Source Route Bridging/ Translational Bridging

Has anyone been able to source route bridge on a router with a single token ring interface? I want to bridge traffic between token ring and ethernet. My router 2612 has only one token ring card. What are my options? We are migrating to ethernet one step at a time. Basically this router will replace a bridge. Thx

What kind of traffic requires Source Route? (SNA). What device hosts are you coming off of?
The attached shows you how to do it from a Token Ring environment to Ethernet. You need to set up your Source-bridge group and source bridge transparent statements. You need to keep in mind that in a Token Ring environment the bits are in a non-canonical format. In Ethernet they are canonical. ex. A MAc address in non-canonical form is 4000.A26A.8802 Translated to canonical form is 0200.4556.1140. This may seem clear as mudd, but it is a bit flipping process. So when you observe mac addresses in the Tomen Ring world you will see the 4000 macs and in Ethernet you will see the 0200 macs. You need to keep this in mind if you ever have to troubleshoot this.

Active Directory Logon / Site Link Bridge Issue

Dear NC,
i have an issue with users in different Locations, to explain easyest here is a little network diagram:
So, as one can see, i have 4 Locations, one is the Headquarter.
The Target Goal is: Users in Location C must Logon with Domaincredentials from Sub.domain.tld from Location A.
Location HQ, A and B are fully routed, Location C has only a route to Location B.
Every Location has at least one writable DC with GC ans DNS Server installed.
I have the following site links:
HQ<>A
HQ<>B
A<>B
B<>C
and also a Site Link Bridge with "A<>B" and "B<>C".
Unfortunatly Users cannot logon in Location C with sub.domain.tld Domaincredentials from Location A.
Need a bit help, thx :-)
-Bernd

Hi Bernd,
I am sorry that I am a little confused here, would you please clarify what do you mean by “Users in Location C must Logon with Domaincredentials from Sub.domain.tld from Location A”?
From what I understand, you have two domains:
domain.tld and sub.domain.tld, and you want that user accounts in
sub.domain.tld (location A) can logon from domain.tld (location C), am I right?
If that is your goal, please make sure the following conditions are true:
During the logon process, specify the right domain name which is like
@sub.domain.tld.
The GC in location C is available to identify the appropriate Domain Controller for authentication process.
There is no network connectivity issues between location A and C, because after GC located a DC in location A, the logon process will take place between location A and C.
In addition, every site should have good network connectivity with at least another site to keep AD replication healthy. If there are critical errors in your HQ site, we should try
to resolve them.
Here is a related article below for your reference:
What Is the Global Catalog?
http://technet.microsoft.com/en-us/library/cc728188(v=WS.10).aspx
Please feel free to let us know if there are any further requirements.
Amy Wang

Airport Express with Fios router connection issues

I have an Airport Extreme I am using with a Fios router (with the Fios wireless deactivated).
Prior to Fios, I used it with Comcast and never had the following issues:
When accessing the web from any of my Macs after a period of sleep or other disuse, the browsers return a "not connected to the internet" message (this is after the machine has returned to service for a time-- not immediately after waking).
Waiting a few more seconds and then trying again usually connects normally. Again, never did that with Comcast-- on and connected was on and connected.
AppleTV is almost NEVER connected when I go to watch it after a period of disuse. Usually, all maner of resets/restarts are required to get everything talking. I have both an older white ATV as well as the newest black model.
I should add that the Verizon tech knew next to nothing about Apple products when he came out. I ended up going on-line and reading all kinds of posts and arriving at my current configuration. Networking has always been a black hole in my Mac knowledge, so, rather than put all the blame on Verizon, I will say it's highly likely my set-up is not optimal.
Does anyone know how best to set-up this combination? I don't really even know how to tell you how I set mine up to begin with!

Unfortunately, if you have Fios, you really are forced into using their equipment and will have to configure the AirPort Extreme in Bridge Mode to work correctly with the Fios gateway.
Check to verify if the AirPort Extreme is set to operate in Bridge Mode, which would be the correct configuration for your setup.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click the AirPort Extreme and then click Manual Setup
Click the Internet icon at the top of the window
The setting for Connection Sharing should be "Off (Bridge Mode)"
Is that the case?

Cisco Router View issue

Dear All,
I have configured ZFS 6.5 on Netware
I have a Cisco 2500 Router, configured SNMP like -
snmp-server community public RW
snmp-server enable traps snmp
snmp-server enable traps isdn call-information
snmp-server enable traps isdn layer-2
snmp-server enable traps hsrp
snmp-server enable traps config
snmp-server enable traps entity
snmp-server enable traps bgp
snmp-server enable traps rsvp
snmp-server enable traps frame-relay
snmp-server enable traps rtr
snmp-server host 192.168.10.2 public
My ZFS server's ip is 192.168.10.2, i have given Router's Lan ip to
NetExplorer's Router Seed also now my Router is been discovered via ZFS and
it is shown in Atlas View also, I have tried to double click on it, then it
shows Services within Services i can see Switch/Bridge, but by Double
Clicking it a "Unified Port Traffic View" Dialog Box Appears which says,
"Discovery could not retrieve the complete property of this node".
Now what to do by which it should start giving information..
Regards
Vikas

Vjohari,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

HH3 Airport Extreme DNS / router address issues

I have a HH3 hard wired (ethernet) from HH port 1 to the small circle port on the Airport Extreme. The AE extends the network around the house via Airport express and we have done this by creating a new network so we can connect either to the HH or to the AEBS network. The AEBS is set to bridge mode but wrong DNS and router addresses are given out by both HH and AEBS when the AE is turned on (192.1.68.1.2 instead of 192.168.1.254). We can bypass the issue by setting these manually but would prefer not to have to. If I turn the AE off, the HH issues the correct DNS and router addresses. I am asking the same question on the Apple forums but not everyone there is familiar with the HH.

Bizarrely, having tried every configuration on the AE, reminded of something vofsanity said to me in a previous thread, I unplugged a powerline extender and the problem seems to have fixed itself!

Bridge Issue: CS6 Unresponsive, how to make it respond?

2 second lag after clicking on any menu item.
4-8 second lag after right clicking on any image.
3 second lag while selecting images with arrow keys.
2 second lag selecting multiple images
My system is high performance:
. 12 Core 3.3Ghz Xeon Processors
. 24GB RAM
. Primary drive is 8 SSDs in a RAID0 configuration
. Dual nVidia Quadro FX5400
. OS: Win7 x64
CS5 and CS5.5 were very “snappy” in responsiveness on this system. CS6 Bridge works fine on my laptop, perfectly responsive.
Once Camera RAW or Photoshop are open, no issue working in these tools, so, the issue is bridge.
Here’s my debugging steps which have not worked to fix the issue:
Installed the latest camera RAW plug in from Nikon. Nikon D800 RAW .NEF files work in windows explorer and in CS5.5.
Installed all windows updates
Installed the lastest nvidia FX5800 card drivers
Uninstalled all Adobe products (reader, media player, etc.)
Uninstalled all plugs ins (HDR, noise, etc.)
Checked there are no fonts on the system (no TTF files)
Uninstalled Office 2013 to make sure there were no system font issues.
Uninstalled all Nikon software except the RAW plug in.
Deleted C:\Program Files\Adobe and C:\Program Files (x86)\Adobe
Searched for any Adobe reference in c:\Users\<my_username>\ (example AppData), and deleted it.
Cleaned the registry of any reference to Adobe or any dll related to Adobe or an Adobe plug in.
Rebooted multiple times.
Re-installed CS6 Master Collection. At this point it did not recognize my raw photos (.NEF from a Nikon D800).
Installed all Adobe Updates.
The updates fixed the camera raw issue
Ran FontTest.jsx – all fonts passed, none failed.
Tried Preferences:
Advanced -> Use Software Rendering : CPU utilization went up, but, no impact on the lag
Startup Scripts : Disabled all but Photoshop CS6
Increased Cache Size, Compacted Cache, Purged Cache, Different Cache organizations, etc.
Does anyone know how to fix this
bob

I talked to support on Thursday and was told that someone would call within 3 days.
Of course no-one did. Adobe have gotten too big and when that happens support becomes bad, very bad.
The last problem I had with bridge was all the 'file type associations' were lost. I thought being a paying customer I will call on their help. Again Crap support, kept telling me the same thing set each one up individually. In the end I found a registry hack that sorted the problem out.
I’m all up for being legal and pay a lot of money on software making sure I am but I do understand that when a large company offers such bad support why people start thinking why pay.
Surely part of the Cloud subscription I pay should enable me to get support others who use the software illegally don’t get. Of course in reality I don’t. I don’t get any useful support.
I have to repeat myself for every department, wait around for calls that never come and hunt the forums for people who seem to do better jobs in informing others of how to solve problems.
I will keep updated on the problem as I know more. I will also like anyone else who is having to problem to message here.

SAP Router start issue

Hello All
We are facing the following issue while starting the SAP router. The router just hangs with the following statement in the command prompt.
trcfile dev_rout
no logging active
upon providing trace level 3 and looking into the dev_route file, the following information is found.
Please help in suggesting possible resolution.
trc file: "dev_rout", trc level: 3, release: "742"
Thu Apr 23 19:06:49 2015
NiIHSBufInit: initialize hostname buffer (IPv4)
NiHLInit: alloc host buf (200 entries)
NiSrvLInit: alloc serv bufs (200 entries)
NiIInit: allocated nitab (811 at 00000000041A2610)
NiIInit: host/serv bufs already initialized
SAP Network Interface Router, Version 40.4
Compiled Mar 30 2015 18:27:50
command line arg 0: saprouter
command line arg 1: -r
command line arg 2: -V
command line arg 3: 3
command line arg 4: -K
command line arg 5: p:CN=USCINSAPSVR10, OU=0000454027, OU=SAProuter,O=SAP, C=DE
service   : 3299
routtab   : ./saprouttab
plug-in   : no plug-in
-argument: 'no argument'
clients   : 800
max servers : 1
quelength : 1
maxheap   : 20000000
timeoutL : 5000
tracefile : dev_rout
tracefile limit : 0 byte
tracefile maxcnt : 0
socket buffer size : 32768
logfile   : no logging active
portrange : no portrange active
local address : default address
->> SncInit(prg=0, ini_fname=(NULL), &sec_avail=000000000213F148)
SncInit(): Initializing Secure Network Communication (SNC)
      PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/64/64)
      GetUserName()="um1adm" NetWkstaUser="um1adm"
SncInit(): Trying environment variable SNC_LIB as a
      gssapi library name: "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll".
DlLoadLib success: LoadLibrary("E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"), hdl 0, count 1, addr 0000000010000000
    using "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): failed GetProcAddress("sapsnc_init_adapter") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
        with error 127 = "The specified procedure could not be found."
DlLoadFunc(): successful GetProcAddress("gss_acquire_cred") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_release_cred") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
Thu Apr 23 19:06:49 2015
DlLoadFunc(): successful GetProcAddress("gss_init_sec_context") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_accept_sec_context") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_process_context_token") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_delete_sec_context") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_context_time") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_get_mic") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_verify_mic") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_wrap") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_unwrap") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_display_status") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_indicate_mechs") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_compare_name") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_display_name") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_import_name") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_release_name") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_release_buffer") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_release_oid_set") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_inquire_cred") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_inquire_cred_by_mech") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_inquire_context") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_wrap_size_limit") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_export_sec_context") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_import_sec_context") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_inquire_names_for_mech") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_inquire_mechs_for_name") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_canonicalize_name") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_export_name") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
File "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll" dynamically loaded as GSS-API v2 library.
DlLoadFunc(): successful GetProcAddress("sapcr_get_version") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("sapcr_get_secudir") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
SECUDIR="E:\usr\sap\saprouter" (from $SECUDIR)
The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.1) to SAPCRYPTOLIB 5.x
Product Version = SAPCRYPTOLIB 5.5.5C pl38 (Oct 7 2014) MT,AESNI,NB
<<- SncPDLInit()==SAP_O_K
<<- SncInit()==SAP_O_K
         sec_avail = "true"
->> SncSetMyName(snc_hdl=0000000000000000, myname="p:CN=USCINSAPSVR10, OU=0000454027, OU=SAProuter,O=SAP, C=DE")
<<- SncSetMyName()==SAP_O_K
     in: myname = "p:CN=USCINSAPSVR10, OU=0000454027, OU=SAProuter,O=SAP, C=DE"
NiBufISetParam: set max heap to 20000000
Thu Apr 23 19:06:49 2015
NiSetParamEx: switch NIP_CONNLOCAL off (not supported by platform)
NiSetParamEx: set NIP_SOCK_BUFFER_SIZE 32768
NiMyHostName: hostname = 'USCINSAPSVR10'
main: pid = 13232, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
NiSelICreateSet: new set0
SiSelNInit: allocate 172528 bytes for FI (811)
NiSelIInit: size of set0 is 811
NiICreateHandle: hdl 1 state NI_INITIAL_LIS
NiIInitSocket: set default settings for new hdl 1/sock 508 (I4; ST)
Windows Version 6.1, Build 7601
Running on Windows Vista
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiIBind: hdl 1 bound to 3299 (IP only)
NiIBlockMode: set blockmode for hdl 1 FALSE
NiIListen: state of hdl 1 NI_LISTEN
SiSelNSet: sock 508 added to set pos 0
NiSelIAddMsg: added hdl 1 to set0
SiSelNSet: set events of sock 508 to: rp-
reading routtab: './saprouttab'
<<- SncNameToAclKey_r()==SAP_O_K
     in: name    = "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"
'aclkey ' (addr=0000000003E5FF60, len=86) full hexdump
0x00000 00030401 00080606 2b240301 25010000 ........ +$..%...
0x00010 00443042 310b3009 06035504 06130244 .D0B1.0. ..U....D
0x00020 45310c30 0a060355 040a1303 53415031 E1.0...U ....SAP1
0x00030 12301006 0355040b 13095341 50726f75 .0...U.. ..SAProu
0x00040 74657231 11300f06 03550403 13087361 ter1.0.. .U....sa
0x00050 70736572 7632                        pserv2
NiStrToAddrMask: '194.39.131.34' -> 194.39.131.34/32 (0/0)
<<- SncNameToAclKey_r()==SAP_O_K
     in: name    = "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"
'aclkey ' (addr=0000000003E5FF60, len=86) full hexdump
0x00000 00030401 00080606 2b240301 25010000 ........ +$..%...
0x00010 00443042 310b3009 06035504 06130244 .D0B1.0. ..U....D
0x00020 45310c30 0a060355 040a1303 53415031 E1.0...U ....SAP1
0x00030 12301006 0355040b 13095341 50726f75 .0...U.. ..SAProu
0x00040 74657231 11300f06 03550403 13087361 ter1.0.. .U....sa
0x00050 70736572 7632                        pserv2
addrinfo of 'USCINSAPSVR09':
0: 192.168.120.19:0 Thu Apr 23 19:06:49 2015
'USCINSAPSVR09' <unknown socket type 0> (0-2-0-0-16)
1: 192.168.120.19:0 <unknown socket type 0> (0-2-0-0-16)
NiHLGetNodeAddr: got hostname 'USCINSAPSVR09' from operating system
NiIGetNodeAddr: hostname 'USCINSAPSVR09' = addr 192.168.120.19
NiIGetServNo: servicename '3200' = port 3200
NiStrToAddrMask: '192.168.*.*' -> 192.168.0.0/16 (0/1)
NiStrToAddrMask: '194.39.131.34' -> 194.39.131.34/32 (0/0)
contents of routtab ('./saprouttab', 3 entries):
KT*,*<<- SncAclKeyToName()==SAP_O_K
'aclkey ' (addr=00000000042354D4, len=86) full hexdump
0x00000 00030401 00080606 2b240301 25010000 ........ +$..%...
0x00010 00443042 310b3009 06035504 06130244 .D0B1.0. ..U....D
0x00020 45310c30 0a060355 040a1303 53415031 E1.0...U ....SAP1
0x00030 12301006 0355040b 13095341 50726f75 .0...U.. ..SAProu
0x00040 74657231 11300f06 03550403 13087361 ter1.0.. .U....sa
0x00050 70736572 7632                        pserv2
    out: name    = "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"
p:CN=sapserv2, OU=SAProuter, O= 194.39.131.34/32                *         *
KP*,*<<- SncAclKeyToName()==SAP_O_K
'aclkey ' (addr=000000000423599C, len=86) full hexdump
0x00000 00030401 00080606 2b240301 25010000 ........ +$..%...
0x00010 00443042 310b3009 06035504 06130244 .D0B1.0. ..U....D
0x00020 45310c30 0a060355 040a1303 53415031 E1.0...U ....SAP1
0x00030 12301006 0355040b 13095341 50726f75 .0...U.. ..SAProu
0x00040 74657231 11300f06 03550403 13087361 ter1.0.. .U....sa
0x00050 70736572 7632                        pserv2
    out: name    = "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"
Thu Apr 23 19:06:49 2015
p:CN=sapserv2, OU=SAProuter, O= 192.168.120.19/32               3200      p
P*,* 192.168.0.0/16                   194.39.131.34/32                *         *
******* NI-ROUTER LOOP ********
SiSelNSelect: start select (timeout=-1)

** Trace file opened at 20150417 112112 Eastern Daylight Time, by disp+work
** Versions SAP-REL 721,0,201 RFC-VER U 3 1459980 MT-SL
ror RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
: Hostname or service of the message server unknown
ST =CONNECTION_PING
HOST =H/192.168.152.50/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001
NAME =OSS
OUP =1_PUBLIC
AP Programm: CL_DSMOP_RFC_WATCHER==========CP (Transaction: )
er: SOLMAN_BTC (Client: 100)
stination: SAP-OSS (Handle: 1, DtConId: 00000000000000000000000000000000, DtConCnt: 0, ConvId: ,)
P RootContextId: 74D4356C5F6B1ED4B6E3593B0548B699, ConnectionId: 74D4356C5F6B1ED4B6E35960B5B7D699, ConnectionCnt: 1
P TransactionId: 5B15E5E476B3F1738EAD74D4356C5F6B
** Trace file opened at 20150417 112113 Eastern Daylight Time, by disp+work
** Versions SAP-REL 721,0,201 RFC-VER U 3 1459980 MT-SL
ror RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
: Hostname or service of the message server unknown
ST =SAP-OSS
HOST =H/192.168.152.50/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001
NAME =OSS
OUP =1_PUBLIC
AP Programm: CL_SM_DATA_SENDER_RFC=========CP (Transaction: )
er: SOLMAN_BTC (Client: 100)
stination: SAP-OSS (Handle: 2, DtConId: 00000000000000000000000000000000, DtConCnt: 0, ConvId: ,)
P RootContextId: 74D4356C5F6B1ED4B6E3593B0548B699, ConnectionId: 74D4356C5F6B1ED4B6E35960B5B7D699, ConnectionCnt: 1
P TransactionId: 5B15E5E476B3F1738EAD74D4356C5F6B
** Trace file opened at 20150417 112113 Eastern Daylight Time, by disp+work
** Versions SAP-REL 721,0,201 RFC-VER U 3 1459980 MT-SL
ror RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
: Hostname or service of the message server unknown
ST =SAP-OSS
HOST =H/192.168.152.50/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001
NAME =OSS
OUP =1_PUBLIC
AP Programm: CL_SM_DATA_SENDER_RFC=========CP (Transaction: )

Any resolution to 10.4.10, wireless router/encryption issues?

Like many others, I upgraded to 10.4.10 and soon began experiencing connecting to the Internet problems on my ATT/2WIRE gateway/router using WEP encryption as well as kernel panics.
Having had my MBP for only two months, I did not have many files so I did a Erase/Install using the disks (v. 10.4.8) that came with the laptop. Immediately after this procedure, I updated to 10.4.9, did permission repairs. The gateway/router issue and the kernel panics with 10.4.10 were gone. Without having installed anything else, I did the combo update to 10.4.10 again (did permission repair before and after) and after the double reboot, I was able to reach the Internet. I then went on to battery and sure enough the Internet connection was lost after about 10 minutes. Then came the kernel panic. I resorted to doing another Erase/Install and updating only to 10.4.9 and since then, no problems at all, even on battery.
I've read through the discussions on this but did not see if there was a resolution. Would 10.4.10 v1.1 resolve this issue? Or is this something that 2WIRE would need to update their firmware?

Welcome to Apple Discussions!
Most likely 2Wire needs to upgrade their firmware. There is still a chance one of these other solutions on my FAQ* might work too:
http://www.macmaps.com/WIFI1048.html
* Links to my pages may give me compensation.

Adobe Bridge issue with index.html files

Hi, I have a perplexing problem.... Three weeks ago, I created a web photo gallery in Bridge. I transferred it to my website via FTP and it worked like a charm. Three days later I created another web gallery transferred it to my website using my ftp and the address of what I uploaded takes me to a blank page. I contacted my web hosting support and was told it looks like an issue with my index.html file. Here is a link to the gallery that is working: www.janieblanchard/com/galleries/prettylights/index.html
Here is the link to the site that is not working:
www.janieblanchard.com/galleries/macrogallery/index.html
Any advice would be so helpful, I've spend too many hours trying different galleries and uploading multiple times.
Thanks!

What exact camera make and model?
What specific, exact version of Adobe Camera Raw (ACR) plug-in?
What specific, exact versions of Bridge and of Yosemite?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Network Issues with Macbook Pro Retina will Apple Router solve issues?

Hi, I just purchased a Macbook Pro Retina 15" and have been having major WIFI/Internet issues. Slow connections, constant spinwheel of death, half loading pages if the website has a lot of images (Facebook, etc). Sometimes I have to wait a fair bit of time and they may eventually load, or I'll have to close the browser and reload the page.
In the area I live in, Bell offers only Fibe 5.1 (802.11 g/b) at this time. I wondered if I purchased a separate router with an 802.11n connection (and disabled the router on the 2Wire modem from Bell), would this solve my issues or is Fibe 5.1 just unable to handle the new "n" technology/speed. I'd like to utilize this computer the way it was meant to be used, but the internet connection that I have leaves much to be desired. Bell won't be upgrading in my area for at least 6-12 months from what they tell me and I refuse to switch to Robbers (I mean Rogers).

I hate to go into a long rant but you may be able to fix your problem by just changing the channel on your 2wire router from ma Bell. They all come with the channel set to a default setting of channel 6 change it to 10. If you are in a high traffic area and they are all set on six you see where this is going. I have a 2 Wire in a high traffic area and I changed mine and it worked like a charm.
Hope this helps
Don Morgan

Bridge issues with opening photos in photoshop

Today I shut down my computer and when I opened it I can't open pictures from bridge to photoshop. It only gives me preview as an option. I have a Mac. I reset preferences and that didn't fix it. Any suggestions.

Me too. After upgrade I am unable to download epubs from jw.org directly to ibooks. Checked my moms and hers is the same. Very upsetting to have to go the long way by syncing to itunes on my pc to get recent literature. Who's issue: Apple or JW? What changed? Who needs to fix it? Who to ask? Don't take the update until this is resolved!! HELP!!!

Verizon Quantum Gateway Router settings issue related to printing and wifi cameras?

Hi,
I have a Verizon Quantum Gateway router and I just did a fresh install of Windows 8.1 Pro x64 and am downloading and installing my printer drivers. I connect the printer to the wifi network, 100% sure it is connected and settings are set to wireless lan. I've had this printer for a while. Doing the setup - it cannot find the printer.
Related: I bought a 2 pack of Motorola Focus66 wifi cameras to watch my dogs when I'm gone. I can connect to the cameras when I'm on my ipad's Verizon Wireless LTE connection, but when I'm at home connected to my same Verizon Fios wifi I cannot view cameras. Yes - the camera and apps support local and remote connections.
I have turned the firewalls all the way off and this does not fix the problems, so I'm believing it is in the router settings. Any suggestions?

I had a wifi network running at my house with a PC, Laptop, 5 iphones an iPad, and an XBox all running with no issues.. I got the "Upgrade" of the Gateway router and I can connect those devices to the network but WiFi printing is screwed up and Air Printing the apple devices is totally dead.. cannot see the printer. The customer support are completely a waste.. they suggested I pay for "Premium Support" At this point I've invested a solid 10-15 hours trying to get this setup and talking to Verizon and its just a mess.

CCM 4.1 route list issue

We are trying to transfer a calls to an after-hours call center. Unfortunately we are getting a fast busy when we attempt to forward. When I run 'debug isdn q931' I can see the reason we are getting a fast busy is the number prefix is incorrect. It's trying to forward the number with our 7 digit prefix in front of the calling number. So our 7 digit prefix is 989-2525 and the calling party for example is 909-656-2222, so when it trys to forward the call it shows the calling party as '98925259096562222' which is why we get a fast buy. The 7 digit prefix 989-2525 is defined in the Route List Configuration, which has to be set otherwise I'm unable to call inbound. What's adding the prefix? Sometimes I'll see the calling party as '98925259892525' and the call does go through.

Heya Carlo!
When you say check if they are the same configured, you are referring to them both having the same selected partitions? I'm able to call the call center from my phone with the correct calling party number.
I'm using a translation pattern where I have a CTI port configured in the Called Party Transform Mask. Under Called Party Transformations I have:
Discard Digits: NONE
Called Party Transform Mask: 2600 <---- this is the CTI port I have configured
Prefix Digits (Outgoing Calls): BLANK
Calling Party Transformation settings are blank.
As for the Route Pattern, I have one configured using the route pattern* 9.1909[2-9]XXXXXX where the discard digits is set for PreDot. I'm actually thinking the issue with discarding digits incorrectly is in the route pattern, still reading up on that part now. What do you think with this info provided?

Router Bridge Issue

Similar Messages

Maybe you are looking for