Router cannot Install- Configuration problems?

I have recently bought a WRT54G2 router for my HP Pavilion p6120 desktop computer. The computer had been connected to the internet previously with a DSL modem (a sprint 645 series). I attempted to install the router with the CD(or DVD I didn't look) and my computer told me there was an 'error defining dialog.' In order to rectify this problem, I downloaded the software off the Linksys website. I ran the setup, and all went well until the Configuration step. As it was 'verifying router configuration' another error dialog box appeared, claiming that I had to stop due to an internal error. How can I solve this problem? Thanks a lot, and if you need more information, just ask!

Do not run the setup CD of the router.You can configure the router manually.
If your Internet Service Provider is Cable follow this link
If your Internet Service Provider is DSL follow this link

Similar Messages

Portal7 Install / Configuration problem

I can't seem to install Portal 7 on Solaris 10 x86. After several weeks and all kinds of effort, I have everything running except that I get configuration errors when I try to install Portal.
I'm running it in the Sun app server container (I need to do this as I'm trying to deploy JCAPS eBAM components).
Here is the error:
[#|2007-02-08T10:00:33.724-0800|SEVERE|SJS Portal Server|debug.com.sun.portal.fabric.config|ThreadID=10; ClassName=com.sun.portal.fabric.config.PortalConfigur
ator; MethodName=getMbeanServerConnection; |PSFB_CSPFC0025:Security error getting MbeanServerConnection
java.lang.SecurityException: java.lang.SecurityException: Authentication failed: Authentication Failed!!|login_failed_template.jsp
at com.sun.jmx.remote.opt.security.AdminClient.throwExceptionOnError(AdminClient.java:337)
at com.sun.jmx.remote.opt.security.AdminClient.connectionOpen(AdminClient.java:144)
at com.sun.jmx.remote.generic.ClientSynchroMessageConnectionImpl.connect(ClientSynchroMessageConnectionImpl.java:71)
at javax.management.remote.generic.GenericConnector.connect(GenericConnector.java:177)
at javax.management.remote.jmxmp.JMXMPConnector.connect(JMXMPConnector.java:119)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at com.sun.cacao.agent.JmxClient.getUnknownJmxClientConnection(JmxClient.java:876)
at com.sun.portal.admin.common.util.AdminClientUtil.getJMXConnector(AdminClientUtil.java:114)
at com.sun.portal.fabric.config.PortalConfigurator.getMbeanServerConnection(PortalConfigurator.java:617)
at com.sun.portal.fabric.config.ConfigurePortal.main(ConfigurePortal.java:129)
It seem obvious that I'm getting an Authentication failure, but I can't seem to figure out why. I've double and tripple checked the passwords and connection information.
HELP!

Are you able to login to Portal even once after the install ??
I had the same problem, but I forgot what I did to get out of this (either a reinstall or doing this cacao restart thing). Probably in my case the install passwords expired for amAdmin & puser IDs. Each time I tried to login, LDAP server was logging error saying "password expired".
In any case, when you are trying to authenticate, tail the Directory Server access logs to see whether your bind request is going to the LDAP or not. If it is, see which ID is being used and whether it is succeeding or not.
-GM.

Cannot install configuration profiles using iphone configuration utility, why?

I have several working configuration profiles, which I can distribute both via email and a website.
I'd like to install the profiles through the iPhone Configuration Utility, but I am not able to do so. The devices show up just fine in the list. When I choose the Configuration Profile tab and clicking the install-button on a profile (which will install fine via Email or website) in the list, nothing happens. Regardless of the device beeing out of the box, or activated via iTunes. What am I missing?
I have tried this on several iPad and iPad 2 devices with the latest (4.3.3) firmware installed.

Hi,
I have the same problem. After creating profile with only General tab being set up it is failing to install on my iPad.
Profile installation failed
The profile could not be added to device
Any suggestions?
I even erase all content and setting but that didn't help either.
The only alarming thing is that in my Certificate section I have red message:
"This certificate was signed by and untrusted issuer"
Can that effect installation?
If that is the case how to fixed it?
P.S. iPad was purchased from Apple Store.
Regards,

Sol. 8 - Network Install Configuration problems

I have a problem with installing Solaris 8 and trying to install network during install. After all conf. questions are answered and I confirm config I get a network error. The error states that there isn't a network avaliable.
I've also tried installing without network support. Then after install is complete I try to install network functionallity without success.
Have you experience this problem or know a solution?

I am having the same problems but worse yet, I can "ping" any computer within my network or from the internet, however, I can not connect to the internet using Netscape. I have a cable modem and a LinkSys router. With Mandrake 7.1 LINUX, Windows 9X, NT 4.0 or Windows 2000 I can connect to the internet without any problem.
Please help.
Thank you.
Juan Ortiz

I cannot install Discoverer, problem of the OraHome

Hi
I have problem with instalation of the discoverer 3.1 or 3i.
I have instaled the database Oracle8i on default OraHome with name 'OraHome81' and I use more than one OraHome. One for WebDB with name 'OraHomeWDB' and one for OAS 4.0 with name 'OraHomeAS'
I want to install Discoverer on the same maschine but when I create another one OraHome for example with name 'OraHomeDV' it says that Discoverer do not support the nultiple instalation and therfore it cannot be instaled on orahome 'OraHomeDV'. It can be only instaled on orahome 'OraHome81'.
When I install the Discoverer to orahome 'OraHome81' it says that this place "d:\...\orahome81" is stil as orahome for 'Oracle 816 Production' and it cannot be used for orahome for 'nt'
Does anybody know how can I install Discoverer?
null

Look at the note below
PURPOSE
This document describes how to install Discoverer 3.1 for Windows or Discoverer
3i server on machines where Oracle 8i, or another product installed using the
Oracle Universal Installer already exists.
Installing Discoverer when Oracle 8i already installed.
If you try and install Discoverer (either Discoverer 3.1 for Windows or Discoverer
3i Application Server) on a machine where Oracle 8i (or some other product which
uses the Oracle Universal Installer) already exists you will see the following
error message or something similar:
"Discoverer User Edition does not support multiple installations, and therefore
cannot be installed on 'Default_Home'. It can only be installed on 'OraHome8i'.
In order to install Discoverer User Edition, please run Oracle Installer again,
and select 'OraHome8i'as the target location.",
where Default_Home is the name of the standard Oracle home and OraHome8i is the
name of the Oracle Home for Oracle 8i.
If you do as the message says, you then get the error, or something similar:
"The location specified, 'd:\oracle8i', is already used as an Oracle home for
'Oracle 816 Production'. It cannot be used as an Oracle home for 'nt'."
where d:\oracle8i is the directory of OraHome8i.
You need to install Discoverer in a non-8i home; so in the example above, in the
Oracle Home in the Orant directory rather than in the one in the oracle8i directory.
The problem is that in the registry, the value for the Default_home key has been
set to the Oracle 8i home. You need to change this to point to the standard
Oracle home. Back-up your registry before editing it.
- Run REGEDT32.EXE or REGEDIT.EXE from the command prompt to open the registry and
edit it.
- Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ALL_HOMES and change the value
of DEFAULT_HOME from OraHome8i to Default_Home (or whatever is appropriate in
your situation).
- From the 'Oracle for Windows NT' program group, run the Oracle Home Selector
and select Default_Home. The Oracle Home Selector just makes this home appear
first in your path environment variable.
You shouldn't run into this problem if you create the Default_Home before the one
for Oracle 8i. But if Oracle 8i is already installed, you might find it best to
de-install all Oracle products, delete the registry entries and then re-install, but
create the Default_Home first.
Hope this helps
Sreeram

Cannot install configuration profile ipad 2

can not install profile using configuration utlity on ipda2. Worked on first iPad but no other iPad works.

Open iTunes, connect your iPad, click on the iPad in the left-hand column then check for updates.
iOS updates are free for iPads & iPhones. I think early ones for the iPod Touch were paid.

CS4 to CS5 Upgrade has install/configuration problems ???

(My system is running Windows 7 Pro 64-bit )
Awile back I purchased:
Adobe Premiere Pro CS4 (FULL version) on the Installable DVD's.
...and just recently, last week, I decided to bite the bullit, and go for the 64-bit CS5 version upgrade.
Adobe Premiere Pro CS5 (Upgrade version) -downloadable option (its cost $299.00 US)
Method 1./ Now, this seemed to be more of an installation/config issue for me. but after I ran the CS5 upgrade, it did NOT
upgrade/change any of my Desktop icons/links ?
In other words, the same old CS4 Icons were on the desktop.
Instead, I had to goto C:\Program Files\Adobe\...CS5\..., and then create a shortcut to the CS5 executable onto my Desktop?
Method 2./
ok, this so-called CS5 upgrade option obviously dos NOT work right.
So, I completely UN-installed CS4 and CS5, and started from scratch again, but this time I simply installed just
the CS5 Upgrade binaries.
Well that seemed to work fine, and it also seemed to ievennstall all the 64-bit CS5 modules, though it also created some extra CS4 directories in C:\(x86)Program Files\Adobe... ? why would it do that ?
ok, well has anyone else also experienced any of this upgrade weirdness. ?
Note: I verified my Windows 7 64-bit was up-to-date, and I also "updated" CS5, actually it updates itself.
I have also had a couple "BLUE-screenies", and crashes" in CS5, none of which, in Windows I can really tell what is going on ?, and I never had these issues on CS4 on this same PC.?
I called the 1-800 number for Adobe Technical Support and basically they said the CS5 upgrade that I purchased should have worked fine. uhmmm ya'd think eh?
So, I thought this forum might be more "aware", and/or helpful regarding my Upgrading woes.
any thoughts, would be appreciated.
Thankyou.
Rick.

An Adobe upgrade is an upgrade by price, only. What I mean is that you're buying a new, fully separate version of the Adobe software from whatever your previous version was, and upon installation, your previous version is left intact (hence the reason your icons did not change--CS4 was still installed).
An update, on the other hand (which is what the program automagically did), actually does replace files, but only in the version that you're updating. A semantic issue, perhaps, but an important distinction.
You can run CS4 and CS5 side-by-side if you like, but if you want to be rid of CS4 and maintain only CS5, you need to uninstall CS4--or preferably, reinstall from the OS up. I always like to start fresh when a new suite comes along.

Adobe Acrobat Custom Install Configuration Problem

I am trying to deploy Adobe Acrobat 8 Professional using the Adobe Customization Wizard 8. I noticed that if I just install the product off the CD, while accepting the defaults, the installation shows up under Add/Remove Programs as Adobe Acrobat 8 Professional and has an installation size of just over 1 GB.
I also customized the installation using the Customization Wizard and after that install I noticed that the application shows up in Add/Remove Programs as Adobe Acrobat 8 Professional English, French, Deutch. In addition, the installation size is almost 2 GB.
What am I missing in my customization? Is there a setting for additional languages that I am not seeing somewhere that also uses twice the amount of hard drive space?

There is a help document from adobe regarding Exit code 6 and Error: DW050
Here are the links for those documents : (These documents are for CS5, CS5.5 and applicable to CS6 also)
https://help-internal.adobe.com/content/help/en/creative-suite/kb/errors-exit-code-6-exit. html
https://help-internal.adobe.com/content/help/en/creative-suite/kb/installation-error-dw050 -dw020-cs5.html
If all other applications are running fine, than try the Acrobat cleaner tool to remove any leftover files from this link( http://labs.adobe.com/downloads/acrobatcleaner.html ) and than try to Install Acrobat XI Pro on your computer.

Good afternoon.I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninst

What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear

You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.

Cannot install itunes 11.1.3 to my windows vista home premium 32-bit. After it finishes the download that it verifies the file I get a message saying "this file cannot be downloaded". What could the problem be??? I uninstalled my itunes and tried again

Cannot install itunes 11.1.3 to my windows vista home premium 32-bit. After it finishes the download that it verifies the file I get a message saying "this file cannot be downloaded". What could the problem be??? I uninstalled my itunes and tried again and keep getting the same message. Please help !

See Troubleshooting issues with iTunes for Windows updates.
For downloading issues see the further information area and use a different browser and/or the direct links.
tt2

Steve Jobs obviously was "the man" because every update or install now gives me problems... i can no longer download anything to my iphone.. giving me errors of "cannot install at this time" and i get an error installing itunes on my other laptop... wth?!

Steve Jobs obviously was "the man" because every update or install now gives me problems... i can no longer download anything to my iphone.. giving me errors of "cannot install at this time" and i get an error installing itunes on my other laptop... wth is going on!??!
ok so the download problem with my iphone.. what could be the cause of that? ive restarted and deleted the "undownloaded app" over 10 times already. and restarted the iphone 10 times... next thing i know i cant install itunes on my laptop.... geez man..
obviously there is a fix which someone will help... but why should i have to go through all that crap to install a so called uncomplicated software... when you think about it this really shouldnt even be an issue.
normally if the thing dosent work. normally with most programs you just uninstall the uncompleted software and just reinstall and everything is usually good to go.. help!

ive never had any problems with ap[ple products in the past... this is a first and a stupid problem if you ask me

I cannot install itunes on my windown 7 laptop. Error says "computer not modified". Please help me with this problem.

I cannot install Itunes and Icloud on my Sony Vaio Laptop - Window 7. Error says " computer/system not modified". Please help me with this problem.

Hello there, jag123059.
The following Knowledge Base article offers up some great steps to follow for resolving issues with installing iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I cannot install iTunes 10.5. Problem is that there are rest of installations. I uninstalled all iTunes, Quicktime, Bonjour, Apples components, but problem goes on. I run WIN XP SP 3 32 BITS. I accept ideas to solve, thanks.

I cannot install iTunes 10.5. Problem is that there are rest of installations. I uninstalled all iTunes, Quicktime, Bonjour, Apples components, but problem goes on. I run WIN XP SP 3 32 BITS. I accept ideas to solve, thanks.

A bit of repetition, mainly for the benefit of anyone else with the same issue. In your case the "for older video cards" version might be worth a try.
When cleaning folders you need to check both the Program Files and Program Files (x86) folders, which you may well have done but didn't mention in the detail above.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if Apple Mobile Device Support won't install normally.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

On a MAC G4, WITH OS 10.5.8, I DOWNLOADED 3.6.8, BUT I CANNOT INSTALL IT. IT SAYS I DO NOT HAVE SUFFICENT PRIVILEGES. WELL, IT'S MY COMPUTER AND I AM THE ADMINISTRATOR ON IT. HOW DO I FIX THIS PROBLEM SO I CAN INSTALL FIREFOX 3.6.8??

On a MAC G4, WITH OS 10.5.8, I DOWNLOADED 3.6.8, BUT I CANNOT INSTALL IT. IT SAYS I DO NOT HAVE SUFFICENT PRIVILEGES. WELL, IT'S MY COMPUTER AND I AM THE ADMINISTRATOR ON IT. HOW DO I FIX THIS PROBLEM SO I CAN INSTALL FIREFOX 3.6.8??
== I DOWNLOADED UPDATE 3.6.8

Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading...

Cannot install iTunes on my Win7Pro PC for several months after a long time w/o problems. Uninstalled iTunes Bonjour with no improvement. Help?

Since October 2011 I cannot update iTunes when I receive an Apple UD notice (Win7Pro PC). I have also lost communication with my iPod Touch. In all cases I have attempted to download the latest version of iTunes. Yeasterday I uninstalled iTunes & Bonjour. I still cannot install iTunes. What can be done to allow iTunes to install?

If you want to do complete reinstall, please follow following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Router cannot Install- Configuration problems?

Similar Messages

Maybe you are looking for