Router drops connection when another user joins.

I recently moved and am using a new router and internet setup, everything works fine until my roomate tries to connect, it will immediately drop both me and him and I get a limited access warning when trying to reconnect to the router.
The router in question is a WRT 110 linksys model
it works fine if one of us is logged on and it will work fine if after we get booted I unplug it for about 10 seconds but if one of us is using the internet and the other tries to get access we both get dropped. Scratching my head on this one.
Any help is greatly appreciated

Is it working now? Try to enable MAC cloning and clone your PC's MAC address. That should work.

Similar Messages

WRT300N router dropping connection when browsing pages with Adobe Flash 9 content

My router seems to drop my wireless connection frequently when accessing web pages that contain Adobe Flash 9 content? I cannot find any settings or determine if there is anything I can change on the router to affect my performance? I am up on the latest firmware, so that is not the problem? Any help is appreciated.

I have the exact same problem. It's not every flash page ,just some. Power cycling the router gets it back, but it is getting annoying.
Anybody have any ideas?

I have Words with Friends app on iphone and game on computer. When I try to play with Facebook friends message says" Account Already Connected. This Facebook account has been connected to another user." How can I play game on iphone or my pc?

I have Words with Friends app on my iphone4S and the same game on computer. When I try to play Words with Friends with Facebook on the iphone the message says" Account Already Connected. This Facebook account has been connected to another user." It is connected to my computer. How can I play game on iphone?

Hi Grandmaz5,
If you are having issues connecting to Facebook on your iPad, and you have already troubleshot the Facebook app itself, you may want to check the built-in iOS settings for Facebook; you may find the following article helpful:
iOS: Using Facebook, Twitter, and other social network accounts
http://support.apple.com/kb/HT5500
Regards,
- Brenden

Allowing a user to create/drop tables in another users schema

We have a central shared schema (TEAM). So we can monitor who is doing what users have there own login(USER1, USER2...). Is there a way to allow a user to create/drop objects in another user.
I.e.
SQL> connect USER1
SQL> create team.table1(col1 char(1));
SQL> drop table team.table1:
How can this be set up?
Ben

Here is what you can do, If you want to keep track of what users are doing.
Open the glogin.sql file and set the spool like this
spool /oracle/audit/SID_&_user.logEverytime user logs in it will be populated and you will be able to see who is doing what.
You can remove the write permission on glogin.sql so that no one can modify it.
You also need to create a script like this, which would rename it every time same user would login.
#!/bin/ksh
time=`date +"%b"_"%d"_"%H"_"%M"`
##you need to pass some more variables and while loop to include all the users## ( This is just for an example)
if [ -f /oracle/audit/SID_SYS.log ]
then
mv /oracle/audit/SYS.log /oracle/audit/SYS.log.$time
fiEdit the glogin.sql file with this script information like this
host /oracle/audit/file.kshHope this helps, if you need more information let me know.

WRT160n v3 has slow connection when multiple users are connected

As of last night my router has been producing slow connectivity when multiple users are connected to it, but it's perfectly fine when only one user is connected.
I am on a laptop myself, but we also have a second laptop and a desktop where the modem and router are set up.
I have upgraded the firmware so that is up to date.
We have Comcast Fiber Optics so my internet speed is normally quite fast even when all of my computers are connected.
Some settings that I have that might help resolve the issue:
I am using DHCP Configuration.
My Channel Width is set to 20 MHz and I am using Channel 11.
The Security Mode is set to WPA Personal. I had it on WPA2 Personal but I read that changing to WPA Personal might help and so far it doesn't seem to have done anything.
I set the Beacon Interval to 50, Fragmentation Threshold to 2304, and RTS Threshold to 2304.
Everything else is set to the default factory configuration.
Just today I received a notice that said "Windows has detected an IP Address Conflict", but ever since I reinstalled the Firmware it hasn't come back. I've rebooted both my laptop and the desktop to confirm it hasn't come back as well.
I consider myself to be computer savy, but I just can't figure out what the problem is as I've tried everything that I could think of including reconfiguring my router and restarting my modem as well. This problem has presented itself in the past before but unfortunately I cannot remember what I did to fix it.

Try using inSSIDer to help you find the best channel.
http://www.metageek.net/products/inssider/
If that doesn't help, you can try disabling WMM.
Edit: You should use WPA2 AES security for best performance.

Router drops connection

Hi, I have a WRT300N that acts as a router/DHCP in a small home network. I have a p2p program, DC++, which requires port forwarding to work correctly. I have setup this in the router, port 1412 and the computer ip address to forward to. The problem is that the router drops connection to internet now and then, with 1-2 hrs. intervals which disconnects all hubs and downloads/uploads in DC++. Very annoying indeed. This has never happened with previous routers including a 3com and a Zyxel, so it has to be something with the WRT300N. What can cause this? I'm not sure what information to send with this message, so it's better if you tell me what you need. Thanks in advance, Mattias Sarling

hi... try upgrading latest firmware on the router, go to www.linksys.com/download and download the latest firmware for the router, after upgrading firmware on the router, reset the router back to factory default settings and reconfigure it according to ISP settings, reduce MTU to 1458, try reducing connection on p2p program... also you can enable QoS to manage bandwidth.

CREATE/DROP synonyms in another user's schema without ANY privilege

What's the best way to enable a user to create/drop synonyms in another user's schema without doing any of the following?:
1) Granting CREATE/DROP ANY SYNONYM or CREATE/DROP PUBLIC SYNONYM to the synonym creator.
2) Logging in as the user that will own the synonym to create the synonym.
* Although option #2 might be ideal, it would require reworking a lot of code in our environment.
I thought about creating a stored procedure in the syn-owner's schema that issues the "CREATE SYNONYM" DDL command and then granting EXECUTE on this proc to the syn-creator -- but, it's my understanding that it's best to avoid putting DDL inside stored code.
Any ideas?
Oracle version is 10.2.0.4

DBA should recognize"should" is the operative word here :)
One clarification: the user from which the DBA's are planning to revoke the "ANY" privs is an account used internally by one of our ETL tools -- not a developer account. In fact, only the ETL tool itself and the DBA's can log into the account in TST/PRD (developers can log in with it in DEV). Even so, the DBA's still want to revoke "ANY" privs from ALL non-DBA accounts in ALL databases (including DEV). I kind of think that this is overkill, but then again, I don't make the rules here!
Anyhow, it seems that what we need here is the insight of a political scientist rather than that of a DBA. (not that your perspective is not valued!!)
Seems that I'll be going back to the drawing board...
Thanks for your help.

WRT54G ver 6 router drops all existing connections when new computer joins

Hello,
I have a WRT54G version 6 Wireless router that operates fine with one exception. I generally connect to the router from one of three laptops in the house. If one laptop is connected, this existing connection drops as soon as another laptop connects to the router. The connections will automatically reconnect in a 10 seconds or so, but it dumps my VPN connection when it disconnects. I am tired of re-establishing the VPN connection everytime this happens.
Any idea why it is doing this? Better yet, how can I get it to stop?
two of the laptops use Windows XP, the third is Vista.
Thanks,
DM

I don't know exactly what is causing your problem, but clearly you are having some poor wireless connections.
The first thing to do would be to download and install the latest drivers for all of your computer's wireless adapters.
If you still have the problem, then try the following, more or less in order:
First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, microwave ovens, wireless mice and keyboards, wireless speakers, and your neighbor's wireless network. In rare cases, Bluetooth devices can interfere. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.
Also, try to locate the router about 4 to 6 feet above the floor, in an open area. Do not locate it behind your monitor or near other computer equipment or speakers. The antenna should be vertical.
Also, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. If your current network is not listed, enter its info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings".
Some users have reported improved wireless connections by switching to WPA encryption.
If you continue to have problems, try the following:
For wireless g routers, try setting the "Transmission Rate" to 54 Mbps.
If you still have trouble, download and install the latest firmware for your router. After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
Hope this helps.

SCCM remote control keeps dropping out when another network adaptor loses connection

Hey guys,
Hopefully someone will be able to help me out
at work, we are running SCCM 2012, and I use SCCM 2012 config manager to manage the clients etc
We have a particularly annoying issue with SCCM remote control; it constantly drops out when a network connection on the client machine disconnects or changes state, even if its not interface I'm remote controlling through
Here's an example for you:
a laptop with a wired, and wireless connection:
I remote control the machine through the wired network address (lets say 192.168.0.1), but if the wireless connection drops out (someone turns it off or it breaks) the remote control client will kick me off, lock the screen, and I have to wait 20-30 seconds
before it will accept my connection again
This happens with any network adaptor that's installed on the client
Here is a copy of the logs re-creating this issue: https://www.dropbox.com/s/nu4w28d44xky3rg/CmRcService.log
(I've edited it to take out usernames and IP addresses as they are publicly accessible)
So my question, does any one know how to fix this issue? I see it uses WMI, is there anyway to get WMI to ignore an interface?
Thanks heaps,
Harry

This is going to be done by design for security reasons. If the network connect for whatever reason is down the pc will automatically be locked.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Windows 2008 R2 TS VPN connection closed when another user logs in

Hi.
I have a W 2008 R2 Ent. server with TS
I have VPN on the TS configured with a L2TP/Ipsec connection to connect to a customer site
Users will remote into the server, and make a VPN connection (click on shortcut to start VPN) and access the customer's site. This has worked OK for 2 years often with several users logged into the TS via RDP.
Recently users are encountering this problem: User A logs into the TS, makes VPN connection, accesses customer site. User B logs into the TS, user A's VPN connection is broken immediately. It seems to happen every time - not sporadic.
Can I get some suggestions on how to troubleshoot this?
Thanks!

Hi,
The error which you are facing is because of Event Id 20226 (RAS connection termination).
Error 831 (ERROR_FAST_USER_SWITCH)
The connection was terminated because user switch happened.
There are multiple login sessions on the user's computer. The user switched from a login session with an active RAS connection to another session. This resulted in the termination of the connection.
For this you can check that you can limit the connection and tried to switch back the original session and make all new connection again. Please refer “Event ID
20226 — RAS Connection Termination” for more details.
Hope it helps!
Thanks.

Dropped connection when using Desktop and laptop

I have a Motorala cable modem connected to a Linksys 10/100 5-port Work Group Switch. I have my desktop connected to this switch and have a WRT5G Wireless Router connected also. The problem is that when my lap top is connected to the internet, the desktop does not connect and vice versa. When the desktop is connected, the laptop shows that there is a wireless connection, but the browser comes up saying no connection. Any advice?

Why exactly do you have this setup? The normal setup would be cable modem connecting to router. Computers (wired and wireless) connecting to router.
How exactly do you "connect" your desktop or laptop to the internet? What do you do to get a connection?
What you have is two devices connected directly the modem and thus your ISP. Unless the modem is actually a modem/router this won't work if your ISP does not allow more then 1 internet connection at a time.
I suspect this slightly setup is the actual problem. If you use the desktop, the desktop gets the IP address from the ISP. Now the desktop is using internet connection through the modem. Thus, your router cannot connect to the internet nor your laptop.
When your router connects to the internet it gets the IP address from the ISP. Again, the desktop cannot get an IP address anymore because the internet connection is already used.
The normal setup is that the internet port of your router is connected to the modem. The purpose of a router like the WRT is to share a single internet connection among several computers - wired and wireless.
Therefore I would suggest you connect the internet port of the WRT to the modem directly and hook up the desktop to a LAN port of the WRT. You can also connect the switch to a LAN port. Now desktop and laptop share the internet connection established by the WRT.

Fix for Airserver or Reflector ( drops connection when call comes in )

Hey Guys
Today i am using AirServer and it works great to be able to show your IPad on you PC or MAC. The problem is that i am sharing a app that does a voice and video call and when the call connects it drops connection of the sharing on the MAC / PC. Once the Phone / Video connection is ended Airserver comes back up and works like advertised. (I just tried Reflector and they both work the same). Don't know if this a securty thing in IOS or not might be ? Any work arounds ? I already sent emails to both Airserver and Reflector. Open to other products if needed.
Does anyone know a solution which might work to be able to share the IPad / IPhone on PC / Mac and not drop the connection. If solution only works on a Mac that is fine as well.
Device
IPad 2 running IOS 7.0.4
Displaying to the following:
AirServer version 1.9.4.0 Windows on Win 7 32 bit.
AirServier version 4.8.1 on Mavericks on a Mac Book Air.
Thx
Dave

Still have the problem does anyone know a fix for this by chance ?>
Anyone know of a application or way to use a lightning to hdmi into a PC or Mac that would allow to show just half of the of the real estate on your monitor ( Similer to Airserver ?). I assume i need some capture card basically i want to be able to show half the screen with my IPAD and show a browser on the other half of the screen.
BTW I am using a IPad Air now running IOS 7.04 same thing.

Problem when another user update record.

Hi All,
i am using jdev 11.1.1.5.0
use case: i have create one adf table which is based on vo where a column claimed_by.
i have add a where clause in vo
where claimed_by is null.
default value of claimed_by is null. when user claimed particular record claimed_by contain id of that user.
now problem is that when two user access same vo at same time. suppose first user claimed a record with id 1 then claimed_by column of table update with 1.
but in second user window same record still show.
so i want if record already claimed by another user and second user attempt to claim same record which is already claimed in mean time. then proper error message show to user like "this record already claimed by another user".
is there possible with change indicator in claimed_by attribute or history column ?
or any other way to do this.

Hi Arun,
i have already read this blog. And i know about JBO-25014: Another user has changed the row with primary key oracle.jbo.Key[x]
but in my use case i don't want this exception occur that's way i have set property reset after update and insert.
but it is not work for me.
my concern is that-
when one user claimed record and set claimed_by column and after that when second user claim same record a proper error message display to user.

How to make one user get locked to edit when another user is editing??

Dear friends,
In the webdynpro application option is given to controll the editability of the UI elements using edit button.When the same application is logged in by another user for ex: B , he should get a prompt saying user A is editing the page.
How to implement this ??and what is the best approach for this please advice.
Thanks in advance.

The best way I could think of and what we implemented is:
Creatin a DB Lock Object around data which you want to work upon.
Requesting a lock when some one opens up a session for editing, if granted then go in edit mode else go in display\ read only mode with a message.
Release lock after save.
Regards
Manas Dua

How to refresh ViewObject from database when another user has changed data?

Hello, I use oracle database server 9.0.2 and JDeveloper 9.0.3 and I am developing a JClient application. I have JTable which is bound to a certain view object based on one entity and this is shared between many users. If a user inserts or updates a row in the viewobject (using for example the table) and commits changes, another user can not see the the inserted row while the underlying viewobject executeQuery() call.
What I need is to refresh data for all users if one of them inserts or updates date. Is it possible?
What I was able to think of was to use timer and executeQuery in certain period of time. Is there any better way? I mean kind of event which is fired when underlaying data has been changed?
Thank you in advance!

So you're saying there is no way for a client application to receive notice from the database that a table has been updated? It seems like this would be a valuable feature, and in fact I could very much use such a feature right now.

Router drops connection when another user joins.

Similar Messages

Maybe you are looking for