Router + IOS version recommendation for WCCP

Hello,
I would like to know the recommended list of router + IOS version to deploy load balancing using WCCPv2 with squid web caches or cisco WAEs, initially in a test environment and later for a production environment.
I have used the following routers and learnt that they are deprecated/EOLed.
Cisco 3600, IOS 12.3(1a); Cisco 2600 IOS 12.3(9a)

Hi Govind
You need to bascially validate the amount of bandwidth consumption and the traffic being handled by the router.
Based on the same you can decide on the router platform.
Once you are done with deciding your server platform you can think off going on for the specific ios featuer set which can support WCCP V2 which you can obtain using different tools available out here in CCO.
regds

Similar Messages

  • IOS ver recommendations for WCCP

    Can anyone comment on recommended IOS versions for software based routers (7206VXR) for WCCP? I am looking at the table that suggests the following versions - 12.1(14); 12.2(26); 12.3(13);12.4(10); 12.1(3)T; 12.2(14)T; 12.3(14)T5;12.4(15)T8;15.0(1)M. Is it a minimum code or recommended code? My router is running 12.3(23), which is a GD version and the latest version for 12.3 train is 12.3(26).
    Thanks.

    Hi,
    Cisco started support WCCPv2 on 7200 router series since 12.0(5)T.  So, yes, those are minimum recommended IOS versions from WCCP perspective.
    Regards
    Nat

  • Solaris Version Recommendations for WebLogic 6.0?

    Hi,
    I guess that the larger part of you is using WebLogic on the Solaris
    platform. I am currently planning a migration from WinNT to Solaris and
    I would like to know if there are certain pros and cons for using
    WebLogic 6.0 on either Solaris 2.6, 2.7 or on Solaris 8. From the
    windows world it's quite a good assumption to go for 'newer is better /
    more stable' but I'm not sure if I can transfer this to the Solaris
    world as well.
    Thanks for your input!
    Daniel

    CERT is a security group ...
    Peace,
    Cameron Purdy
    Tangosol, Inc.
    http://www.tangosol.com
    Tangosol Server: Enabling enterprise application customization
    "Daniel Hoppe" <[email protected]> wrote in message
    news:[email protected]..
    Cameron,
    what is 'certs'?
    Cheers,
    Daniel
    -----Ursprüngliche Nachricht-----
    Von: Cameron Purdy [mailto:[email protected]]
    Bereitgestellt: Samstag, 26. Mai 2001 05:28
    Bereitgestellt in: misc
    Unterhaltung: Solaris Version Recommendations for WebLogic 6.0?
    Betreff: Re: Solaris Version Recommendations for WebLogic 6.0?
    ... just remember to check certs regularly, and if you go with an older
    version, start by checking all existing advisories.
    Peace,
    Cameron Purdy
    Tangosol, Inc.
    http://www.tangosol.com
    Tangosol Server: Enabling enterprise application customization
    "Charlie Therit" <[email protected]> wrote in message
    news:[email protected]..
    I'm partial to Solaris 8 because of its improved VM File I/O caching
    algorithm. However, all three have good diagnostic and tuningabilities
    and would work well with WebLogic.
    -Charlie
    Daniel Hoppe wrote:
    Hi,
    I guess that the larger part of you is using WebLogic on the Solaris
    platform. I am currently planning a migration from WinNT to Solaris
    and
    I would like to know if there are certain pros and cons for using
    WebLogic 6.0 on either Solaris 2.6, 2.7 or on Solaris 8. From the
    windows world it's quite a good assumption to go for 'newer isbetter /
    more stable' but I'm not sure if I can transfer this to the Solaris
    world as well.
    Thanks for your input!
    Daniel

  • Cisco router - IOS version issue

    What happend as ISP provider and provide the service but the Cisco router IOS running at low end version. Pls discuss . Thanks

    Sorry, I don't understand the question.  Can you please elaborate?

  • What are the New IOS Versions available for 2960 series Switches?

    Hi all,
    can anybody give the details about it?
    thanks,
    Haribabu.

    15.0(1)SE is the latest-and-greatest IOS.  Unfortunately, I personally wouldn't recommend this to anyone because this version has a memory leak that affects switches even before configs are loaded.
    Next is the 12.2(58)SE2.  This is so-so.  The earlier version has a memory leak similar (not the same) as the 15.0(1)SE but it is triggered differently.
    12.2(55)SE4 is probably the most stable of the "new" versions. 

  • Most recent iOS version available for 2nd gen iTouch

    What is the most recent version of iOS that can be put on a 2nd generation iPod Touch?  It seems like everything in the app store needs a much newer version of the iOS, and I'm not sure if I can put it on my iPod.  (And I'm sure not going to go out and buy a whole new iPod just to download a video game). It's at version 4.2 right now, and I just updated it.  Also, if the operating system can be updated any further, does anyone have any clue how to do it?  According to iTunes, 4.2 is the latest version, so it won't let me update any further.

    iOS 4.2.1 is the highest version that is compatible with your 2G iPod Touch. It can't be updated any further.
    B-rock

  • NAC Module and Router IOS version

    Hi
    I have recently purchased two NAC modules for our 3845 ISR's. The routers where running IOS 12.4(3c) ip base so i upgraded to 12.4(21)ip base as instructed. The routers still dont recognise the modules. The cisco data sheet says the routers need IOS 12.4(11)T or above and IP base image or above. If i do show inventory i get NAME: "unknown", DESCR: "unknown" PID: NME-NAC-K9.
    Do i need a different IOS image on the routers to activate the modules?
    Thanks

    Yes, you need T-train image: 12.4(11)T or 12.4(15)T or 12.4(20)T.

  • Just got a MacBook, what wireless router do you recommend for me to buy

    besides the Apple Airport Extreme Base Station. Thanks!

    I use and very highly recommend Netgear routers. I use their WGR614 in my mixed Mac/PC/Xbox/Wii network setup and it performs like a charm. It was easy to configure through their broswer configuration setup and does exactly what it is supposed to do - and it cost me all of $40 at Best Buy.

  • Is there a minimum IOS version for windows radius 2012R2

    Hello,
    We use a windows server 2008R2 and NPS for radius authentication of our 887,881 and 891 routers, ASA V8.4, and 3750 switches.
    We are thinking about migrate our radius to windows 2012R2, wich is a new version of NPS.
    do you know if there is a minimum IOS version required for NPS on 2012R2 Windows ?
    Thanks

    Hi,
    Yes NPS will work with Window Server 2012R2 and for the minimum server certificate requirement
    check the below link.
    http://msdn.microsoft.com/en-us/library/cc731363.aspx

  • Wireless Router WRT54G version 7. Connected computer gets disconnected from internet

    I have recently installed a Wireless Router WRT54G version 7 for my home office purpose.
    My home PC and my laptop are connected to it. Especially on my laptop, I have observed frequently getting disconnected from the internet. I need to power OFF the router and power it ON to get the internet connection restored
    Need help to get this problem resolved
    Thanks
    Rohit

    Access set up pageof router .... look for MTU ....change the size from 1500 to 1300 ....click save settings ....
    Click on wireless tab ....change the channel to 11 .....click save settings ....
    Go to advance wireless settings subtab ....
    Beacon interval 75
    RTS & Fragmentation threshold 2306...... click save settings ...
    Click on status check Ip address & firmware version on the same & let me know ...

  • Is it same IOS version for Switch & Router?

    Hi,
    Is it same IOS version for Switch & Router?
    Regards,
    Samuel

    Sam,
    The Latest Version depends upon the Switching platform.
    For example:
    On 2900XL Platform - 12.0(5)WC15
    On 2950 - 12.1(22)EA8
    On 3500XL Platform - 12.0(5)WC15
    On 3550 - 12.2(25)SEE2
    It would be better if you specify the switch platform that you have questions about, so we could point you in the right direction.
    I hope it helps.
    Regards,
    Arul

  • 1841 router ios upgrade from Version 12.4(1c) to c1841-ipbase-mz.151-4.M5?suggest the right memory for this?

    hi here my router configuration with memory details,i need to upgrade to 15.1 but i uploaded the 15.1 os by using TFTP server but not upgraded.server returned error?
    Router#show version
    Cisco IOS Software, 1841 Software (C1841-IPBASE-M), Version 12.4(1c), RELEASE SO
    FTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2005 by Cisco Systems, Inc.
    Compiled Tue 25-Oct-05 17:10 by evmiller
    ROM: System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)
    Router uptime is 0 minutes
    System returned to ROM by power-on
    System image file is "flash:c1841-ipbase-mz.124-1c.bin"
    Cisco 1841 (revision 6.0) with 114688K/16384K bytes of memory.
    Processor board ID FHK10411A72
    2 FastEthernet interfaces
    DRAM configuration is 64 bits wide with parity disabled.
    191K bytes of NVRAM.
    31360K bytes of ATA CompactFlash (Read/Write)
    Configuration register is 0x2102
    Router#show flash:
    -#- --length-- -----date/time------ path
    1     13937472 Oct 15 2006 06:32:34 +00:00 c1841-ipbase-mz.124-1c.bin
    2         1821 Oct 15 2006 06:46:38 +00:00 sdmconfig-18xx.cfg
    3      4734464 Oct 15 2006 06:47:28 +00:00 sdm.tar
    4       833024 Oct 15 2006 06:48:00 +00:00 es.tar
    5      1052160 Oct 15 2006 06:48:34 +00:00 common.tar
    6         1038 Oct 15 2006 06:48:58 +00:00 home.shtml
    7       102400 Oct 15 2006 06:49:24 +00:00 home.tar
    8       491213 Oct 15 2006 06:49:50 +00:00 128MB.sdf
    9      1684577 Oct 15 2006 06:50:30 +00:00 securedesktop-ios-3.1.1.27-k9.pkg
    10      398305 Oct 15 2006 06:51:06 +00:00 sslclient-win-1.1.0.154.pkg
    8679424 bytes available (23252992 bytes used)
    Router#dir flash:
    Directory of flash:/
        1  -rw-    13937472  Oct 15 2006 06:32:34 +00:00  c1841-ipbase-mz.124-1c.bin
        2  -rw-        1821  Oct 15 2006 06:46:38 +00:00  sdmconfig-18xx.cfg
        3  -rw-     4734464  Oct 15 2006 06:47:28 +00:00  sdm.tar
        4  -rw-      833024  Oct 15 2006 06:48:00 +00:00  es.tar
        5  -rw-     1052160  Oct 15 2006 06:48:34 +00:00  common.tar
        6  -rw-        1038  Oct 15 2006 06:48:58 +00:00  home.shtml
        7  -rw-      102400  Oct 15 2006 06:49:24 +00:00  home.tar
        8  -rw-      491213  Oct 15 2006 06:49:50 +00:00  128MB.sdf
        9  -rw-     1684577  Oct 15 2006 06:50:30 +00:00  securedesktop-ios-3.1.1.27
    -k9.pkg
       10  -rw-      398305  Oct 15 2006 06:51:06 +00:00  sslclient-win-1.1.0.154.pk
    g
    31932416 bytes total (8679424 bytes free)
    Router#dir nvram:
    Directory of nvram:/
      190  -rw-         633                    <no date>  startup-config
      191  ----           5                    <no date>  private-config
      192  -rw-         633                    <no date>  underlying-config
        1  -rw-           0                    <no date>  ifIndex-table
        2  ----          12                    <no date>  persistent-data
    196600 bytes total (193862 bytes free)

    thank you,
    i have deleted my flash using command "delete flash:"
    before i deleting my IOS i issued show flash: and it lists all files with IOS file.
    after i delete the flash then i downloaded IOS image to flash after that i gave the show flash command and i m only able to see IOS image ,not the below files"i.e:sdmconfig-2811.cfg,es.tar,common.tar,home.shtml,home.tar,128MB.sdf,securedesktop-ios-3.1.1.45-k9.pkg,sslclient-win-1.1.4.176.pkg"
    could you plz tell me what are these files,
    in my new flash i m having my IOS only,the above bolded files are not present.Is it a problem?
    Router#sho flas
    -#- --length-- -----date/time------ path
    1     40617068 May 2 2008 05:38:36 +00:00 c2800nm-advipservicesk9-mz.124-9.T7.bi
    n
    2         2748 May 2 2008 05:49:56 +00:00 sdmconfig-2811.cfg
    3       931840 May 2 2008 05:50:14 +00:00 es.tar
    4      1505280 May 2 2008 05:50:36 +00:00 common.tar
    5         1038 May 2 2008 05:50:52 +00:00 home.shtml
    6       112640 May 2 2008 05:51:06 +00:00 home.tar
    7       527849 May 2 2008 05:51:24 +00:00 128MB.sdf
    8      1697952 May 2 2008 05:51:48 +00:00 securedesktop-ios-3.1.1.45-k9.pkg
    9       415956 May 2 2008 05:52:08 +00:00 sslclient-win-1.1.4.176.pkg
    18186240 bytes available (45830144 bytes used)

  • Router IOS requirements to work with WAAS WCCP?

    Can some help me with up to date switch and router IOS requirements to work with WAAS WCCP configuration? There used to be a Cisco document explaining that but I can't find it any more.
    Here is out WAAS 4.2.3 deployment in the network:
    Data center: Cat6500 Sup720-3B running IOS 12.2(18)SXF12a will do WCCP L2 redirection. I've seen minimum Sup720 IOS requirement of 12.2(18)SXF13 in one place and 12.2(18)SXF16 in another, but there are also examples of using 12.2 (18) SXF5. Which one is the latest Cisco recommendation?
    Remote sites: 3825 and 3845 routers (some are running 12.4 T train and some are in 12.4 main line) will do WCCP GRE redirection to WAE's. One of the routers will use a WAE-NME-522 module. Others are WAE applicances. Again, what are the latest Cisco recommendations?
    Another question: for an IOS release, does it matter which package to use, such as advanced IP services, enterprise services, or SP services?
    Thanks a lot.

    Here you go.
    http://www.cisco.com/en/US/partner/prod/collateral/contnetw/ps5680/ps6870/white_paper_c11-608042.html
    For IOS release, you will need a package that has WCCP support.
    Hope this helps.
    Regards.
    PS: Please mark this as Answered, if this answers your question.

  • 3750X iOS license required for routed ports

    Hi all,
    I've been tasked with installing our new Internet router. I have a stand-alone WS-C3750-24P-L with LAN base. I need a routed port to establish connection with our ISP. I've purchased IP Base licensing and applied it, and copied the ipbase iOS to flash, but I get "Error: hardware not supported by firmware. Try loading never software instead." on boot.
    Is my process faulty? Am I not understanding the requirements necessary for routed ports? Or do I simply need a newer iOS version? I'm using 122-58.SE1.
    Sorry for the basic question, and thanks in advance for any help you can provide.
    Len

    Are you sure that you loaded the right IOS (hopefully you didn't upgrade your switch with an iOS ... )? In the title you write about an 3750X, but in the text you mention a (to my knowledge non-existent) non-X model. Please show the exact filename that you downloaded and also a "show version".
    And the 3750-X with IPBase supports routed ports.
    Don't stop after you've improved your network! Improve the world by lending money to the working poor:
    http://www.kiva.org/invitedby/karsteni

  • 3560 IOS version for IPT + duplex settings?

    Hi! Need a recommendation of which IOS version to use for a 3560 w inline power to be used with ip telephony. Also does the ip phones work well with duplex set to auto?

    You check after the IOS ver 12.1(11). This will support IPT

Maybe you are looking for

  • How can I generate a real-time highchart from my database data?

    I have looked several links; however, I couldn't find a working demo showing how to implement a highchart using data from a database. Objective: I want to generate a real time highchart line graph getting data from my database. What I want is very si

  • How can I set SWF to scale to screen

    Hi all, I am working with Flash CS5 (AS3) on an iMAC running 10.6.8 I have finished my Flash presentation which is set for a large monitor. My file is 1920x1080. How can I get the SWF to scale to a smaller monitor if needed? When I output an HTML fil

  • THIngs I wish my Iphone could do

    Well I have had my iphone for a week now and so far pretty good. My wish list of things I want my iphone to do...(if anyone knows how to do it would be great) 1 send pictures via text messaging and also email (I loved this option on my palm) 2 be abl

  • Getting an error when i am execution an BI query

    Hi Expert, I am getting an error when i am execution an BI query using ABAP. Its Giving me this Error  "The Info Provider properties for GHRGPDM12 are not the same as the system default" and in the error analysis it saying  as bellow. Property Data I

  • Stop and start charging without cause.

    My macbook stops charging and the red light in the cable plug turns off. After a sec the light turns on, but green, and in the battery icon reads "no charging". After a sec, the light in the cable plug turns into red and the macbook starts recharging