Router is not being recognized on wireless network

i have had a WRT54GX router for about a year now. but all of a sudden i am unable to connect to my wireless network. i didn't change a thing. my SSID and security are the same. but when i search for wireless networks, it doesn't find mine. i have no viruses or spyware on my computers. i reset the router. still my wireless computers are not seeing it. i didn't move it. the light for wireless is solid green. my wired connections work. i am really dumbfounded by this. could it be that the router is damaged, at least the wireless part. i would appreciate any help.

What wireless card are you using? If you have the Intel Pro Wireless 2200bg, this card is known to have connection problems that were fixed with the latest driver. Go to the Intel web site and download and install the latest driver.
The problems with the 2200bg card became apparent after a recent Windows XP update.

Similar Messages

HP office jet 8600, wireless not working, IP address not being recognized

Purchased new HP office jet pro 8600 N911a. Inserted CD software on relatively new Toshiba laptop using Windows 7, but problem is that printer IP address is not being recognized. Wireless router is Apple airport extreme. Have checked various potential solutions, including the following: deleting software and re-inserting CD, turning off router, computer, printer and resetting, running a wirless network test (no problems found, wireless on and working and connected), ensuring that laptop and printer are on the same wirless network (yes), ensuring that printer IP address is entered correctly, and ensuring that firewall issues are not a problem. Airport extreme settings show this printer's MAC address as a "wireless client" and its IP address as a "DHCP client"; however, when clicking on the "printers" heading in Airport extreme printers, no printers are listed (this is the pane that shows the USB printers connected to your Airport wirless device). Any suggestions would be appreciated

Hi,
Why don't you connect the printer wirelessly to your Airport Extreme?
You may do so by clicking the Wireless icon on the printer screen, click Settings and follow the Wireless Setup Wizard to connect the device, then it should recieve its own IP by using the printer capabilities..
If you prefer to use such a Print Server configuration, you may try using a different USB and check if that may help, otherwise I would suggest you to contact Apple as they know their accessories the best..
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Time capsule not being recognized by network, Airport working fine.

Time capsule is not being recognized by network. Tried unplugging and restarting, but no go. Airport is working fine and network is up and running.

Try just doing a reset to the TC..
An upgrade to lion might just put you into the fire.. even the frying pan is better.
I would suggest you downgrade the firmware on the TC to 7.5.2 as later firmware is more buggy and adds nothing for OS earlier than Lion.. on the contrary it causes more issues.
This will not harm your existing backups.
Are the two computers both connected by ethernet?? Is the connection issue over wireless?
Give a bit more info on the network layout. Mode of the TC.. are any computers using ethernet?

HT201974 I just installed a wireless cable modem for a desktop PC and my MacBook Pro; After installing, I changed the password on the wireless connection at the PC but it is not being recognized by Airport as the new password.

I just installed a wireless cable modem for a desktop PC and my MacBook Pro; After installing, I changed the password on the wireless connection at the PC but it is not being recognized by Airport as the new password. Can anyone help?

Hi twinkytomes,
Welcome to the Support Communities!
The article below may be able to help you with this.
AirPort Utility 6.x: Password-protect your wireless network
http://support.apple.com/kb/PH5119
Cheers,
- Judy

Why can I not add a system in Raid Admin, my raid is not being recognized

I was able to see it a few days ago but now it will not connect, I need to check one of my drives which I am pretty sure needs to be replaced. amber light is on and when I checked it the other day it showed a degraded array and drive 2 was not being recognized. could the cables from the xserve to the raid be bad?
thanks

The XServe RAID uses the ethernet connection for all administration. Make sure the ethernet links are active and that you're in the same subnet (or at least somewhere the XServe RAID can route to).
Did you manually configure the network ports or leave them as DHCP?
If DHCP it's possible that the controller's IP address has changed, in which case you'll need to be on the same local subnet to locate the RAID.

My ipod was connecting to my home wi-fi just fine until I uploaded new music from my Itunes on my laptop. Now my ipod and my iphone will not connect to my wireless network. I've tried resetting the network settings etc... Nothing seems to work. Help!

My ipod (version 6.1.3) was connectiong to my home wi-fi just fine until I uploaded new music from my itunes via my laptop. Now my ipod and my iphone will not connect to my wireless network. I've uplugged my wireless network and reset my network settings etc... nothing seems to work. Please help!

Does the iOS devices connect to other networks?
Does the iOS devices see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Since both iPhone and iPod stopped connecting I suspect a problem with your network.

HT4623 I started updating my iPhone 3gs but now it is locked and sim is not being recognized by the set

I started updating my iPhone 3gs but now it is locked and sim is not being recognized by the set

Sounds like you had the phone hacked to work on a network other than what the phone was originally locked to. When you updated the software on the phone it reverted back to the lock which makes your sim unusable.

Why is the scanner on my HP1CD560 HP Photosmart Prem C310 Series not being recognized?

Why is the scanner on my HP1CD560 HP Photosmart Prem C310 Series not being recognized in my computer ? I have the same printer/scanner/fax at work and I couldn't get it to scan either. They just keep saying No scanners were detected.
And it tells me on the scanner to do it from the computer!! Ugh!!!!! I need it done yesterday! This ePrint has been very disappointing. Print quality is terrible, it always has errors when I try to print, and I continuously have to go to my so-called wireless printer and hit the home button to wake it up! What good is having wireless if I have to go to it? I might as well plug in! Waste of money and can't afford to buy a different one But any answers would be greatly appreciated.
OS- Windows 7 64-bit

jewlz0001 wrote:
Why is the scanner on my HP1CD560 HP Photosmart Prem C310 Series not being recognized in my computer ? I have the same printer/scanner/fax at work and I couldn't get it to scan either. They just keep saying No scanners were detected.
And it tells me on the scanner to do it from the computer!! Ugh!!!!! I need it done yesterday! This ePrint has been very disappointing. Print quality is terrible, it always has errors when I try to print, and I continuously have to go to my so-called wireless printer and hit the home button to wake it up! What good is having wireless if I have to go to it? I might as well plug in! Waste of money and can't afford to buy a different one But any answers would be greatly appreciated.
OS- Windows 7 64-bit

PC+AX Error - ....Windows is not setup to manage wireless network....

I'm attempting to setup AX with Windows XP. I have a 802.11g Dlink router (DI-524) that I typically connect to using my work laptop. The PC has a direct connection to the router. The AX constantly flashes amber. I tried hard reseting the AX. When I run Airport Admin Utility on my PC the AX does not show up. However, I can see it using my laptop in the wireless connections. When I open Airport Setup Assistant I get the following error "This computer has no wireless interface enabled or Windows is not setup to manage wireless networks on this computer. If you have....."
I'm not sure what do do from here. Appreciate any help.

I have a Qwest wireless modem (model 2701hg-d) and am trying to set up the Airport Express (AX) to use already existing wireless network wirelessly (ie without the ethernet cable). Is this possible?
In order to set it up I have the AX plugged into the modem via an ethernet cable. I have reset the AX and then run the Admin Utility. Once it recognizes the AX I then go to the Airport tab and select 'Join an Existing wireless Network (wireless client)' and then enter in the Network Name exactly as it is spelled in my modem configuration. I check the 'Internet' tab and it says connect using: Wireless Network adn the 'Network' tab is grayed out. Then I hit update and the admin utility no longer lists the AX and the AX light is blinking amber. Not sure what is going on. I am using v6.2 of the firmware.
Do I need to use WDS?
Also, does anyone know if multiple speaker selection is available for itunes pc like it is in itunes mac? Currently I can only play either my computer speakers OR my kitchen speakers.

IMac PowerMac G4 4,5 Airport is recognizing my wireless network but can't log on

I have a iMac PowerMac G4 4,5 and Airport is recognizing my wireless network but when it ask for password it won't let me change it to WPA2 (which is what my network is on). What is wrong??

Some users have obtained an older AirPort base station to use with vintage computing hardware, so their early 802.11b cards could still get whatever level of 'security' without detracting from later wireless systems for newer devices that use a different protocol or frequency. By use of a different wi-fi for the old stuff.
An ethernet splitter or hub device can allow more than one base station to operate. A backward-compatible AirPort extreme from about 2004 could do, if you go there.
{I gave away a very nice 800MHz 17" iMac G4, it didn't see much use. Then I found the new owners had left it unplugged for a year, & with the 1/2AA 3.6V lithium battery dead, it would not start. And they got rid of it...}
Happens I have an original Apple refurbished AirPort Extreme orb last model (the high end in its day) still in the generic brown Apple box; unused and never tested at my end of the road. And that was a spare. Also I found three more used ones in second hand stores, for about $3. each. Alas, the tiny early model AirPort express does a fine job, too. I'm using one as they work with both b/n wi-fi.
Good luck & happy computing!

I do not want to switch wireless networks

No, Airport Utility, I do not want to switch wireless networks to get my Time Capsule mounting again. This is because if I switch wireless networks, the network will go spinning its little time wheel of nothingness forever and ultimately report that it cannot find the Time Capsule it switched for. On the other hand, if I choose not to switch, it insists that there's nothing to be done with the Time Capsule that's right up top, all by itself, in the Airport wireless devices in the network.
All I want is for my Time Capsule to stop having these fits where it decides it won't join the network that already exists, that is already quite happy, and that it does not need to be the base station for. What is the problem that keeps making it go off into these fits where it won't join the network and won't let any network join it? And why does this keep happening? And what will stop it short of throwing the Time Capsule out the window?

Due to logistics, I attempted to configure via wireless connection. The AirPort utility recognized the AirPort Express only after I pressed the reset button on the Express. It then showed up and I went through the setup dialogs regarding joining an existing network (my Airport Extreme) which it found. I configured the Airport Express using no security, as I was not sure which to choose and I was told there was an issue with my older Mac and working with the newer security protocol. The dialog box indicated that the configuration was complete, "The settings for this Airport Express have been successfully updated.. You can close the window or wait for the Airport Express to restart." I waited for about 5 minutes and it did not restart. I then closed and reopened the AirPort utility and it indicated that it could not locate any wireless devices, neither of the AirPort devices showed up. I tried relaunching the AirPort Utility several time with the same results. I then rebooted my machine and launched the AirPort Utility; it identified my Airport Extreme but not the AirPort Express.
In order to connect via ethernet I would have to remove the AirPort Express from the location from which I intend to use it and connect it adjacent to my computer. What about losing or changing supposed retained settings by unplugging and moving each time? The ethernet connector currently runs between my cable modem and my AirPort extreme. This means getting a 2nd cable or disconnecting my AirPort Extreme to use the existing cable. Do I need to have this connected when trying to configure the AirPort Express? By turnoff the wireless I think you mean using the software to turn it off and not pulling the wireless card in my computer. I am a little confused why the AirPort Utility can only identify the AirPort Express only after I press the reset button on the Express.
Thanks for your help.

Ipod touch not being recognized by itunes now

i have a friend who has an ipod touch....everything had been going fine for him and then all of a sudden it was not being recognized any more....what caused this? he did say that he had done an update but i'm not sure what version he has....could this possibly be the problem.....does anyone an a fix for this?

I think Apple is having a problem at the moment, my Ipod touch was always fine syncing until the new update! (Even on older itunes version, I could'nt sync since new update came out) It just isnt recognizing the device...
Ive done all that Apple says to do, none of which helps at all, I reckon its thier own side of the problem they need to fix...

IPod touch not being recognized by iTunes on my MacBook, and on 2 other PCs

Hello,
After scouring the web and these discussion forums to no avail, I've decided to post my problem. I downloaded iTunes 8.0 yesterday, and updated the firmware on my iPod Touch to 1.1.5. I tried connecting my iPod, and nothing happened. It is not being recognized by my MacBook. So, I tried using another USB iPod connector, and nothing happened. I tried using a firewire connector, and nothing happened. Frustrated, I tried connecting to my one roommate's HP laptop and see if it would get recognized there - no. I then tried on my other roommate's laptop. The device was recognized to be USB, but iTunes wouldn't go ahead and try and reformat it. I'm starting to lose my mind! I've tried resetting the iPod touch itself loads of times to no success. I've tried restarting while having the iPod connected to the computer, and still nothing.
What should I do now?

Sorry about not getting to you on the quick-fast, but we aren't Apple employees.
What ended up being the solution you needed, as you said, you couldn't find any information already posted on this problem, so documenting your fix may help someone in the future.

Why isn't my iPod 6th generation not being recognized by iTunes?

Why isn't my iPod 6th generation not being recognized by iTunes?

Did you alresady try these suggestions? iPod not recognized in iTunes and Mac desktop and iPod not appearing in iTunes

TS3716 ipod nano is not being recognized by iTunes.

My ipod nano 2nd generation (and working perfectly) is not being recognized by iTunes.
Any suggestions?

Does the iPod work OK?
Have you tied resetting the iPod? Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
Next would be to place the iPod in recovery mode and then restore via iTunes. If iTunes does not see the iPod then the iPod is not usable. For recovery mode:
iPhone and iPod touch: Unable to update or restore

Router is not being recognized on wireless network

Similar Messages

Maybe you are looking for