Router issue as well

When I try to open the connect to a network I get the message "The settings saved on this computer for the network do not match the requirements of the network." I came home from vacation with my computer and can no longer access the wireless internet with my laptop! PLease help!!

First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
In the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. Delete your current network (this will remove any old settings). Reboot computer. Return to "Preferred Networks" and re-enter your current network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings". Reboot computer. Your computer should login automatically.

Similar Messages

No airtunes with pppoE due to routing issues?

I just switched to an optical fiber to the home internet connection (which is getting pretty popular here in Japan). Needless to say, the network is very fast, however, I can no longer use airtunes via my airport express network. The airport express stations (both of them) no longer show up in iTunes. My guess is that this is due to a routing issue and the same problem must have been encountered by others before and hopefully solved. The new internet connection uses pppoE to make a connection to the internet service provider. This gives me an internet address of the form 125.197.xx.yy. I still have my airport express set to get an address via dhcp (which the new optical fiber hub provides) and is of the typical private network form 192.168.1.4. When I am connected by pppoE to the internet, my iTunes cannot see my airport express due to routing issues I assume. Is there an elegant solution to this -- can I use my airtunes and the internet at the same time? Would modifying the internet routing help here (I have used this before when I have had multiple interfaces going (e.g. one in a secure local lan and the other supporting an internet connection via ssh to the outside world). Any advise would be much appreciated. I haven't tried asking my airport express to log in via pppoE -- is this the only solution?

Well as I have for my last several posts -- I solved the problem myself. I am pretty sure that the root cause was a routing problem (pretty obvious in fact). By have the airport express base station connect via pppoE itself (I have a remote relay airport express as well) and switching to NAT and DHCP distribution of addresses via the airport express, I can both see my airtunes as well as my ethernet connection. It is a non-ideal solution as I have a fixed IP which would have been convenient to log in from outside to, but I guess I can live with that.

IB Routing issue. Unable to find routing to the corresponding incoming msg

Hi All,
We are facing a Routing issue. The flow of message across the DB is given below.
1) Message will be triggered from 3rd party application to PeopleSoft portal with Service Operation A
2) From portal one more service operation B will be invoked to communicate with CRM
Both the service operations are synchronous. I have tested the Service operation in CRM and I am able to get the results. But in Portal if I test, I am getting the error like
+"Unable to find routing corresponding to the incoming request message"+
I have checked the routing alias name between Portal and CRM data bases and Its same.
could you please give us a clue to debug this further?
Thanks,
Hari.A

You should check which permission list the service operation is attached to, and check if the user has been granted to, Something like the following from the backend :
SELECT   distinct c.roleuser
FROM     psclassdefn a, psroleclass b, psroleuser c
WHERE    a.classid = b.classid
AND      b.rolename = c.rolename
AND      a.classid = '<permission_list>' If nothing is returned for your user, then you could created a new role and give it to the user.
Also, since you are on Peopletools 8.52, all this configuration settings can be done through Integration Network WorkCenter. I wrote articles about that (and you can find something about permission list for a given service operation as well) :
http://gasparotto.blogspot.nl/2012/11/peopletools-852-integration-network.html
Nicolas.

Netcomm N4 Router issues keeps crashing

I am onto my second Netcomm router. First one kept on dropping out the DHCP settings, second one causing issues as well. Customer support is poor so I thought I'd put it out there to see if anyone else has had issues and how to resolve them.
I have two Macs attached via ethernet cables to router.One G4 on Tiger the other G4 on Panther. The settings keep dropping out. I set up the G4 just now,in network it allowed me to set up using DHCP but when I went to set up G5 it will only let me set up manually.
On the router at http//:192.168.1.1 I have set DHCP setup to distribute ip address's from 192.168.1.2 to 192.168.1.234 however they don;t seem to hold- I have keep re-entering everything over sometimes daily. I also have UPnp selected as I use ichat (this helps open ports that I originally had problems with). On the Upnp it has Connection 0 as selected.
What else do I have to do to make it so that I can configure both macs for using DHCP on the router and how do i make it so that it stays instead of dropping out. When it's working it runs great?
Any feedback would be so appreciated!!

We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash ID's to help us learn more about your crash.
#Enter about:crashes in the address bar (that's where you enter your website URL) and press Enter. You should now see a list of submitted crash reports.
#Copy the 5 most recent crash ID's that you see in the crash report window and paste them into your response here.
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes]] article.

Verizon/Time Warner Routing Issue

I've been having trouble logging on to my email through Outlook, IPad, or IPhone. The service provider is Time Warner. Apparently the problem is a routing issue between Time Warner and Verizon and they've had the routing issues for over 2 months and have still not resolved the problem. Since no one at Verizon seems to know anything about this, does anyone have any information as to when the issue will be resolved?

I can sign in using webmail and see my email. But I can't use Outlook, my IPad or IPhone utilities to see my email using TW as a provider. If I'm anywhere else, using any other provider, I can use Outlook, my IPad and IPhone without any problems.
When I called TW, they told me the problem was a routing issue that both TW and Verizon were working on and had been working on for at least 2 months, but no solution yet. They were surprised that no one at Verizon knew this.
Since everything worked fine until a week ago and nothing changed in my settings and Verizon verified that everything was set up correctly, I'm satisfied that this is the issue. My concern is that not one Verizon representative has acknowledged that there is a routing problem between TW and Verizon; especially if the problem has existed well over 2 months. You would think that an issue like this should be shared among all their troubleshooting team.

Routing Issue with 2 Nics on Windows Server 2008 R2

Good Day
My issue is I needed to set up port forwarding for a web server to communicate with our hotels management server to check availability.
Initially the server has a single Nic configured in the 172.26.1.0 /24 network , Its default gateway the Switch vlan interface 172.26.1.1
We have many vlans for all the systems in the hotel and the server also needs to communicate with 3 other servers on different subnets which it does just fine.
I now added an additional adsl line with a managed router which has an interface of 192.168.10.1 /24 , My servers second NIC has the IP address 192.168.10.2 with its gateway being the 192.168.10.1
This 192.168.10.0 network is in a L2 Vlan and the rest of the network does not know it exists. It was working fine then just stopped asfter i added a static route to the server , which i did with RRas... I did this as the server could not communicate with
just one of the servers..
If i disable the 172.26.1.0 NIC the port forwarding works but then obviously the rest of the network goes down.. I know its a routing issue but am lost
please help

Hello,
using multiple default gateways is not a good idea.
See details in http://support.microsoft.com/kb/159168/en-us
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Routing issue- seeing same IPs for two hops

Hello All,
I'm seeing two same IPs in the traceroute output. Is that due to routing issue that nexhop is as the same device for the first time?
Log:
6 10.30.102.26 61.060 ms 10.30.100.142 61.266 ms 10.30.102.26 61.071 ms
7 10.30.102.26 61.139 ms 61.211 ms 10.61.191.2 60.948 ms
Can you guys help me to fix the issue??
Regards,
Thiyagu

Are you load balancing anywhere?
6 10.30.102.26 61.060 ms
   10.30.100.142 61.266 ms
   10.30.102.26 61.071 ms
7 10.30.102.26 61.139 ms 61.211 ms
   10.61.191.2 60.948 ms
HTH,
John
*** Please rate all useful posts ***

Routing Issue with Telia

I think verizon has a routing issue with Telia.

thought I would share this, Telia has admited an issue on their network
Twitter / Telia_service: @Ungvall routing problem? This ...
https://twitter.com/Telia_service/status/179661595276881921
Cached
Similar
Share
View shared post
BTW Apparently @Telia_service had routing problems on both the latest iOS and ... DNS problem and we are working with Akamai for a sollution to this problem

Routing Issue with 3550

I am having a routing issue with a 3550 switch. I have 5 vlans and I need one of the vlans to access a different router based on destination IP rather than our edge router. I have entered a static route on the 3550 that points to the secondary router whenever a certain network is tried to be accessed. My problem is I can't seem to get the traffic to flow correctly. When I trace route an address on the Internet the path shows as expected, the 3550 then my firewall then my edge router. When I trace an address that is on the other side of the secondary router I get the 3550 as the first hop, then nothing. I can ping the address so I know the path is up. What could be the issue? Thanks in advance.

Hello,
in addition to Mahmood´s post, what do you have defined as the next hop for the default route to the secondary router ? If you use an interface on the 3550 as the next hop, make sure that whatever is connected is in the same subnet, otherwise use the IP address of the next hop. So, let´s say your remote network is 192.168.1.0, and the secondary router is connected to FastEthernet0/1, your default route should look like this if the secondary router is in the same subnet (in this example, the IP address of the secondary router would be 172.16.1.2):
interface FastEthernet0/1
no switchport
ip address 172.16.1.1 255.255.255.252
ip route 192.168.1.0 0.0.0.255 FastEthernet0/0
Otherwise, try:
ip route 192.168.1.0 0.0.0.255 172.16.1.2
where 172.16.1.2 would be the address of the secondary router.
Does that make sense ?
Regards,
GNT

Audio tracks playing different audio tracks - routing issue?

I'm having trouble with some routing issues I believe. Here's the deal:
Some audio tracks are playing different audio tracks, when that region is not even in it. For instance:
Track #2 is Soloed. Output is Output 1-2. I hear the audio file that is in Track #1, which is NOT Soloed and I shouldn't even hear. I don't hear anything from Track #2. The only way I can hear Track #2 is by playing it from the audio bin, which obviously isn't going to work out right.
If I drag the audio region of Track #2 to a brand new audio track, I still don't hear anything. Is it possible this audio file(s) got corrupted somehow?
Please help!

Chris Joye wrote:
I'm having trouble with some routing issues I believe. Here's the deal:
Some audio tracks are playing different audio tracks, when that region is not even in it. For instance:
Track #2 is Soloed. Output is Output 1-2. I hear the audio file that is in Track #1, which is NOT Soloed and I shouldn't even hear. I don't hear anything from Track #2. The only way I can hear Track #2 is by playing it from the audio bin, which obviously isn't going to work out right.
If I drag the audio region of Track #2 to a brand new audio track, I still don't hear anything. Is it possible this audio file(s) got corrupted somehow?
Please help!
Check the parameters, in the left side of the arrange page window.
To me, it sounds as if you have a bunch of arrange tracks, which are all playing back through audio track #1.
Cheers

NO HELP WITH ROUTING ISSUES FROM VERIZON

Spend 2 hours with technical support to no avail. Have routing issues where I can’t get from my FIOS residential account to remote web site abroad. Trace route fails at so-0-0-0.XT1.AMS2.ALTER.NET [146.188.14.209]. FIOS technical support is incapable of doing any troubleshooting beyond basic customer premises equipment, refusing to escalate the case to network engineering team. I was basically told by FIOS tech support supervisor {edited for privacy} that this is not Verizon’s problem and no help will be provided. What is even more frustrating that Verizon agents are not capable of receiving emails from customers with details such as trace route.
Is there anyone at Verizon monitoring this and able to help? Just in case, ticket number that I have with Verizon is {edited for privacy}
Here is trace route details.
tracert 212.44.136.226
Tracing route to brserv.bridgetour.ru [212.44.136.226]
over a maximum of 30 hops:
1     1 ms    <1 ms     1 ms Wireless_Broadband_Router.home [192.168.1.1]
2    12 ms     9 ms     9 ms L100.BSTNMA-VFTTP-71.verizon-gni.net [98.118.28
1]
3    16 ms    19 ms    19 ms G0-6-4-1.BSTNMA-LCR-21.verizon-gni.net [130.81.
75.132]
4    45 ms    15 ms     8 ms ae3-0.BOS-BB-RTR1.verizon-gni.net [130.81.151.6
5    19 ms    19 ms    19 ms 0.xe-3-2-0.IL1.NYC9.ALTER.NET [152.63.26.81]
6    21 ms    19 ms    19 ms 0.ge-1-2-0.IL1.NYC12.ALTER.NET [152.63.26.86]
7   107 ms   108 ms   107 ms so-0-0-0.XT1.AMS2.ALTER.NET [146.188.14.209]
8     *        *        *     Request timed out.
9     *        *        *     Request timed out.
10     *        *        *     Request timed out.
11     *        *        *     Request timed out.
12     *        *        *     Request timed out.
13     *        *        *     Request timed out.

BT help aren't always that helpful, but BT engineers claim that it is a BT sales issue and nothing to do with them seems a bit extreme.
Are you sure your daily speed is 8Mbits, not 8Mbytes? How are you measuring this? Is it the number coming from the BT speedtest?
If it really is 8Mb, then I think it's worth checking with the mods;  at: http://bt.custhelp.com/app/contact_email/c/4951 . But be aware they take 3 working days to reply: sometimes more if busy.

Has anyone with sprint have time/date issues as well as imessage function automatically turning itself off?

has anyone with sprint had time/date issues as well as imessage function automatically turn itself off?

Im having the same problem, I updated my Iphone 4S to 6.1.3, shortly after that my phone had no audio. It was working fine one minute and then stopped. Was listening to music when sound gave out on me. It wont ring, phone just vibrates even after turning off vibration option. I've tried all the options listed and nothing. My phone has never been jailbroken either. If I connect the earphones is works perfectly. On one of my last calls received, phone's ringtone was heard for about 2 seconds before muting and just vibrating. Ringtone sounded perfect, speakers did not sound damaged.
What else could be done? I've read several post regarding this and it seems like Apple has no solution to this yet. Very dissappointed.

Possible internet routing issues driving me crazy!

I've somehow hit a problem accessing a particular favourite website and it seems I may have a routing issue.
I've spoken with a friend who is fairly network savvy and he's suggested I raise a case \ complaint with BT. I thought I'd use this forum to test if I'm missing something I could be doing to fix it before logging a problem with BT Helpdesk!
I've a BT Homehub 2 (Current firmware   4.7.5.1.83.3.5 (Type B) and I can access pretty much all websites I care to look at without any issue at all, however the site I read most days is now no longer viewable on any of my 2 PC's nor my iPhone. When I try to access it I get no error messages at all just a blank white page.
Doesn't matter if I try using IE or Firefox or Chrome browers it's the same result - I just see a blank white page.
The site in question www.celticquicknews.co.uk (or www.celticquicknews.com) and is definitely available, as I can access it when using a site such as http://www.free-internet-organization.tk/ on both my PC's and iphone so I know the web site is up and running and available for browsing but since Thursday lunchtime I've had no joy in being to access that particular site directly wihout resorting to using another middleman site to let me view it.
I have tweeted the guy who hosts the www.celticquicknews.co.uk site and he's said his site is fine but has numerous similar queries around BTINTERNET folks having the same issue as I'm reporting.
I run McAfee Internet Security and having disabled the various firewall \secure browsing functions no improvement still no joy.
I did successfully somehow connect directy to the illusive web site this morning (Sunday 1st May) on my iphone at around 10am, but by the time I boiled the kettle to have a coffeee and sit and read the site it became inaccessable again on my iphone and both my PC's! So what's going on?
www.celticquicknews.co.uk [217.174.253.143]
www.celticquicknews.com [217.174.253.143]
Homehub TCP\IP info is as below which I suspect is of value to the more techincal on the forum:
Broadband network IP address   109.152.154.29
Default gateway   217.32.142.102
Primary DNS   194.72.0.114
Secondary DNS   62.6.40.162
ADSL line status
Connection Information
Line state   Connected
Connection time   0 days, 01:11:16
Downstream   15,978 Kbps
Upstream   1,144 Kbps
ADSL Settings
VPI/VCI   0/38
Type   PPPoA
Modulation   G.992.5 Annex A
Latency type   Interleaved
Noise margin (Down/Up)   5.2 dB / 6.0 dB
Line attenuation (Down/Up)   31.0 dB / 13.8 dB
Output power (Down/Up)   23.6 dBm / 1.7 dBm
C:\>tracert -d 217.174.253.143
Tracing route to 217.174.253.143 over a maximum of 30 hops
1    <1 ms    <1 ms    <1 ms 192.168.1.254
2    15 ms    15 ms    15 ms 217.32.142.102
3    18 ms    17 ms    16 ms 217.32.142.142
4    22 ms    22 ms    21 ms 213.120.163.26
5    22 ms    20 ms    21 ms 217.32.27.30
6    21 ms    21 ms    21 ms 217.32.27.178
7    22 ms    21 ms    21 ms 109.159.250.78
8    33 ms    35 ms    35 ms 109.159.250.13
9    28 ms    28 ms    29 ms 62.172.102.1
10    29 ms    28 ms    28 ms 195.66.224.98
11    33 ms    34 ms    33 ms 88.208.255.61
12    38 ms    32 ms    33 ms 88.208.255.102
13     *        *        *     Request timed out.
14     *        *        *     Request timed out.
15     *        *        *     Request timed out.
16     *        *        *     Request timed out.
17     *        *        *     Request timed out.
18     *        *        *     Request timed out.
19     *        *        *     Request timed out.
20     *        *        *     Request timed out.
21     *        *        *     Request timed out.
22     *        *        *     Request timed out.
23     *        *        *     Request timed out.
24     *        *        *     Request timed out.
25     *        *        *     Request timed out.
26     *        *        *     Request timed out.
27     *        *        *     Request timed out.
28     *        *        *     Request timed out.
29     *        *        *     Request timed out.
30     *        *        *     Request timed out.
Trace complete.
C:\>
I've reset my HH several times over the weekend and am baffled as to how I can somehow have 1 site excluded from my browsing options for no obvious reason other than a suspected internet routing issue.
My iPhone is on ORANGE and when disabling the wireless connection it too is unable to view the site in question so it's a real pain!
Not sure where to go to progress this so any help \ guidance is very much appreciated.......
Solved!
Go to Solution.

Appreciate the help....been out for most of the day and checked in to see if any additional posts.
I tried pinging the site and it does seem to resolve OK and also tried accessing site via IP but same issue - blank white page.
>ping www.celticquicknews.co.uk
Pinging www.celticquicknews.co.uk [217.174.253.143] with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Then tried the telnet command "telnet 217.174.253.143 80" and I do not get any errors and as suggested the command prompt goes blank but no matter what I type I get no errors or response from server 217.174.253.143.
My IP address has changed from this morning and sadly still same issue for me.
Internet connection configuration
Connection Information
Connection time
0 days, 10:05:37
Data Transmitted/Received (MB)
10.8 / 29.4
Broadband username
[email protected]
Password
Not configured
TCP/IP settings
Broadband network IP address
86.147.168.198
Default gateway
217.32.142.102
Primary DNS
194.72.0.114
Secondary DNS
62.6.40.162
The tracert comments make sense so that's helped me understand, thanks for checking that out.
So what's the best option for me? Am I wasting BT and my own time logging a case?
I'd not usually bother pursuing this for the sake of a single web site but I'm bemused how this has happened since last week?
Thanks again for all help and guidance.
PJ

Will a 2 port LAG setup between 2 cisco 200-50s create routing issues?

I followed this guide. http://sbkb.cisco.com/CiscoSB/GetArticle.aspx?docid=caae365b755f46f5989177cb68216304_Link_Aggregation_on_Cisco_Series_Managed_Switches.xml&pid=2&converted=0 and linked ports 2 and 26 on both switches. Outside IT staff seems to think this will cause routing issues if multiple vlans are not involved.

Hello,
VLANs are not required for LAGs to function properly. Once you configure the LAG members you can configure the LAG as a trunk port with multiple VLANs, and access port with just one, or even a routed port with an IP address on it.
As long as both sides of the LAG are configured the same way there won't be an issue. Since these switches are Layer 2 only, they don't even do any kind of routing, so your outside IT may have meant a layer 2 loop, which will happen with multiple connections between the same switches. But when you configure them as a LAG is treats those links as the same connection, so there is no layer 2 loop either.
Hope that helps,
Christopher Ebert - Advanced Network Support Engineer
Cisco Small Business Support Center
*please rate helpful posts*

Internet/Router issues and new "secure email"

I'm supposed to have a 35MPS internet plan. When I switched to the higher speed plan, I paid for the Verizon router and installation. I have both a Mac and Windows 7 Laptops as well as an older netbook. To say that the wireless connectivity sucks would be complimentary. I've used the automatic troubleshooter....I've looked through forums and followed advice on settings etc...with no joy. Before I "upgraded" I had my own belkin n router. Even though the router is downstairs in an office , with the belkin, I could connect on my back deck and all but the furthest upstairs rooms in the house. Since I "upgraded" the wireless won't stay connected with line of sight 8 feet from the router so we have cables trailing thru the living room. For the brief moments when wireless is connected it is slower than dial-up. The cabled connection seldom exceeds 10MBPS ( this is where they tell me the plan is "up to" 35MBPS")
We have a mountain home with DSL and a VERY basic wireless router. Both the Mac and PC connect effortlessly and even my very untechsavvy wife mentioned how much faster the 3MPBS DSL service is than FIOS. Her next question "Tell me again why are we paying so much for FIOS?"
The latest debacle (forget that companies choose to not learn from others mistakes, think Netflix here) is the new secure email settings. I updated my Mac and my android in strict compliance with the Verizon directions and for a few minutes all was well. Today I can't connect through my android. An "authentication error receiving" message show up with a note to check my settings only I HAVEN"T CHANGED MY FLIPPING SETTINGS! Now I have to go in and re-enter my account password several times a day to get into my email account when the PW is stored in my phone! I consantly have to rest the Mac as well. (Hmmm no yahoo, gmail issues and they are free....)
To be fair I haven't called in the issue with the wireless connectivity because I have called before on other issues and frankly I don't have the time to wait on hold. The last time I had a "technical problem" with my service I ended up telling the tier 2 tech how to fix the problem.
As a Quality Assurance /Customer Service professional, the one thing I can tell Verizon is that there is no marketing campaign that will overcome word of mouth reports on poor service and response. I installed FIOS years ago when it was first available in my neighborhood. Service was reliable, customer service responsive and capable. That all seems to have gone by the wayside to improve the bottom line. Volume can go a long way to masking attrition for quite a while, but it isn't sustainable. The cable companies in my area have an even worse reputation which is the only reason I've not yet left...and that's a really crappy reason to stay.
I understand that it's the processes and the system which are hosed up. The poor CS reps are customer facing and they take it on the chin for every corporate decision viewed as stupid by customers. There may be a few really bad customer service reps, but the majority of CS reps DON’T come to work to see how many customers they can **bleep** off. CS Reps are only as good as the process under which they must work. When working with organizations and speaking with CS reps one question I always ask is "How long would you put up with what you put out if you were dealing with another company?" Then I suggest that the leaders/managers attempt to call in with a problem using only the same avenues available to paying customers.
Companies should also must realize that the "cancellation fee" they threaten people with is usually about a month and a half worth of service. After that it's money back in the consumers pocket, or more likely into competitions pocket and not in Verizon’s pocket. It’s the principle of the fee that keeps customers hanging on.
Now that I’ve vented if anyone can tell me a better router to use than the one Verizon gave me, I’m all ears. I really don’t care about remote accessing my DVR.

NavyCPORet wrote:
...Before I "upgraded" I had my own belkin n router. Even though the router is downstairs in an office , with the belkin, I could connect on my back deck and all but the furthest upstairs rooms in the house...
...Now that I’ve vented if anyone can tell me a better router to use than the one Verizon gave me, I’m all ears. I really don’t care about remote accessing my DVR.
Since you already have the Belkin and know that it works well, I would suggest hooking that up to the Verizon-supplied router and using that. Turn off the wireless from the Verizon router.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Router issue as well

Similar Messages

Maybe you are looking for