Router Linksys RV082 - firmware update?? latest or not??

Do Cisco recommend me running the latest firmware update? Im just an individual who uses it for like a small web-/FTP-/Mail-server, etc...
What are the recommodations? Personally I would have updated to the latest...but what are actually the Cisco recommendations?

Thanks for ur informative answer.
How do I find out which version I have of this router? I see you have v1 and v2 and v3...on mine it says nothing on the hardware (router) about which version it is.
I assume its here (URL below) where I see which one is the latest for each version, correct???
http://www.linksysinfo.org/index.php?threads/latest-official-cisco-firmware-for-small-business-routers.33233

Similar Messages

  • I have an ipad2 and we purchased an HP office jet 6600.  I can not connect to print.  In searching the net, I have been advised to get the firmware update but can not find it.  Can you advise?

    I have an ipad2 and we purchased an HP office jet 6600.  I can not connect to print.  In searching the net, I have been advised to get the firmware update but can not find it.  Can you advise?

    Is the HP on the airprint list?
    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
     Cheers, Tom

  • 'MacBook Pro EFI Firmware Update (v2.3)' not installing

      'MacBook Pro EFI Firmware Update (v2.3)' not installing
            I've tried multiple times now to install this update. When I do, it downloads and my computer will restart around 5 times with the 'beep' the first time. Once its finished the restarts and resumes normally, I check the Software Update via the Apple menu and it still appears in the list of updates.
    What's the cause of this and what can I do to resolve this?

    Is your machine plugged in when you do this?  The firmware update will not take place unless your system is plugged in.  You'll just get a black screen that flashes a few times and it will eventually boot regularly back to what it was.  If the firmware is installing, you'll see a progress bar at the bottom of your display.

  • Router WRT54G, after firmware update to 1.02.0, internet not connect.

    Hello,
    (sorry by my english)
    WRT54G V6 - the connection to Internet is hang.
    After making a "Firmware Update 1.00.9 - 1.02.0" the connection to Internet I must do it in manual form, and it is hang in intermittent form.
    With Firmware 1.00.9, it does not happen east error.
    My internet connection is ADSL.
    As I can solve this?
    Thanks.

    Wizzard,
    Having the same problem here.  After updating the firmware the wireless connection to the network is unstable.  After rebooting the laptop most of the time I get "Low or no connectivity" message.  Sometimes it connects and dies after a few minutes.  And sometimes it connects and stays connected until shut down.
    What do you mean by "u have to reset it for 30 seconds and then reconfigure it"?  Do you mean you actually have to reset the router to default settings and reconfigure, or just power down and bring it back up?
    Thanks,
    Stas

  • WRT1900AC - 2118 Error on Router Settings and Firmware Update

    I bought a WRT1900AC in June and it has worked great. I was able to configure it fine after buying it with no problems. I wanted to make an update recently so I logged in and found that I couldn't access the router settings. When I tried I would get an error 2118.
    At first I only got the error when clicking on "Connectivity" but was able to access "Troubleshooting". I powered off/on the router and everything still worked at this point except I was now getting the error on all router setting options Connectivity, Troubleshooting, firmware update msg that would display at the top of the admin panel. I tried more reboots/resets and nothing error error error.
    I contacted Linksys support and after being on the phone ALL day they deteremined that the router must be defective. I brought the router back to best buy and they gave me a new one. Now I bring this one home and right out of the box the msg I get is "Your router was not successfully setup" and the error at the bottom is error 2118. I have tried rebooting/resetting and I can never get past this screen. After a reset I have tried to choose to configure manually and am able to login to the admin panel but I get the exact same error as with the original one error 2118 on any of the Router setting options and again it is displaying that there is a firmware upgrade available but I get the error 2118 and I click on "update". I have even followed the instructions on trying to use TFTP to update the firmware but all I get is "Unable to get a response from the server". 
    Right now the status is my internet works and my wireless works but only with the orginal network name and password since I can't change it.
    FYI - Tech support kept pointing to my browser but I have tried from several devices and same issue.
    Tried from:
    winxp - IE8, firefox, chrome
    windows7 - ie, firefox
    ubuntu 12.04 - firefox
    ubuntu 10.04 - firefox
    Cleared caches and rebooted on all and same issue on all. My last linksys router went 7years 0 problems, ah man this sucks if anyone can help I would be grateful.

    Thank you so much for replying.
    Working from win7 IE11
    -windows firewall disabled
    -antivirus software firewall disables
    -disabled anitvirus software
    -disabled  browser security add-ons
    -cleared browser cache & ran ccleaner
    -added linksyssmartwifi.com and 192.168.1.1 to compatibility view
    tried accessing linksyssmartwifi.com and am getting "Your router was not successfully setup"
    tried steps when connected from wifi or LAN Port 1
    Have tried the same steps but selected to configure manually so I could login with local access. I can access any of the Smart Wifi Tools but I can't access anything under "Router Settings' ie: Connectivity, Troubleshooting, Wireless or Security. I get the error 2118 so even though I have downloaded the firmware update to my desktop I can't upload to router since I can't access that page. Also if I click on the New Firmware available click here link I get the same 2118 error.
    When I click on details of the 2118 error it reads:
    http://linksys.com/jnap/router/GetWANStatus2 : {} -- Status: 200 OK Content-Type: application/json; ...

  • 5530 firmware update found but not compatible?

    Hi, 
    the phone is a french 5530 (no fimlock, no netlock, a free phone), a firmware update is found from nokia, i can download it from the phone. Then it restarts the phone, and a white screen appears with the update bar. But then it just restarts and on the home screen the message appears that it is not compatible with my network provider? I really want to update... but how?

    I'm having exactly the same problem. I even tried downloading via laptop, but it wont complete the installation.
    I am so sick of my phone freezing or switching itself off I have just rang my contract supplier and they are going to arrange to get a new phone sent out. I did ask if I could have a different make of phone as I don't have much confidence in this one, but they will only exchange for the same.
    Let's hope a new phone solves the issues!

  • Mac mini EFI Firmware Update 1.7 Not supported on system.

    I am attempting to install the Mac mini EFI Firmware Update 1.7 on my 2012 Mac Mini (just purchased) to solve my flickering display problem.  When trying to install the update, it states that the software is not supported on my system.  I am connected directly to my HP 2311x monitor by a HDMI cable.  I can't seem to find an alternative solution to this problem.

      Model Name: Mac miniHere's the information in my System Report:
      Model Identifier: Macmini6,1
      Processor Name: Intel Core i5
      Processor Speed: 2.5 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache (per Core): 256 KB
      L3 Cache: 3 MB
      Memory: 4 GB
      Boot ROM Version: MM61.0106.B04
      SMC Version (system): 2.7f1
    Hope this helps.

  • 10.4.6/firmware update and sync not working? No, .mac is down

    I went to sync .mac this morning, and I guess it was the first time since installing the firmware update and 10.4.6. It first said another computer with the same name was registered, then hung. Next time it said it was not registered and proceeded to sync very slowly then exit with errors. After a reboot there was still trouble. Then I thought to check and found on .mac that the sync service was down since yesterday, and remains down.
    Funny how I thought my system was acting crazy when it was the .mac system itself that's experiencing problems.
    Mark

    I got my bookmarks to sync this morning, but nothing else would.

  • Router Linksys RV082, RV016 https problems

    Problemas con Cisco Linksys RV082 y RV016, en paginas que manejan https, ejemplo www.logmein.com al iniciar sesión me regresa de nuevo a la pagina inicia de inicio de sesión, al investigar encuentro que es una posible suplantación de identidad, por la fucnión que tiene el RV de balancear la carga ya que cambia de un modem a otro modem que este mas libre, esto es uno de los problemas con los que me encontrado y aun no he podido solucionar en un buen tiempo, conocera alguien como arreglar este problemon.
    Gracias de antemano.
    Problems with Linksys RV082 and RV016 Cisco in pages that handle https, eg when logging www.logmein.com returns me back to the Home page of login, I find it when investigating a possible identity theft, the fucnión VR has the load balance as it changes from a modem to another modem that is more free, this is one of the problems I found and I have not been solved in a while, someone will know how to fix this big problem .
    Thanks in advance.

    Enrique,
    On the RV082:
    System Management-> Dual-WAN
    Change to Load Balance (Auto Mode) At the bottom of the page you will now see Protocol Binding
    Select HTTPS [TCP/443~443] from the dropdown
    Select the source IP or IP range: (i.e. 192.168.1.100 to 150) This will bind HTTPS for any LAN device that uses an IP in this range.
    Select the Destination IP: Usually leave at 0.0.0.0 to 0.0.0.0 for ALL destinations
    Select the Interface to bind the protocol to (WAN1 or WAN2)
    Check the Enable box and Add to list. Save Settings at bottom of page.
    On the RV016:
    System Management-> Multi-WAN
    Look for Interface Setting and select Edit for WAN1.
    Follow the steps from above.
    Please let us know if this helps or if you need further assistance.

  • Toshiba 32RL853B firmware update - many features not available

    So after downloading the drivers only to find there is no USB option to upgrade my Regza 32 RL853B, and several failed network download attempts to upgrade the TV firmware, because the overair option is greyed out.
    I finally got a fast enough network connection (internet is woeful where we live), to download the upgrade,
    When it was installed, I expected the Youtube XL to be replaced with something that works.
    I expected an option to be able to join a tablet as I have seen reference to this being possible and have even downloaded an IOS app.
    I even thought I might be lucky enough to get Netflix or some such apps added to the software available.
    Did I expect to much?
    To be honest there appears to be absolutely no change!
    What should I have expected from this upgrade?

    I dont know if you expected too much but usually you can find all the firmware information details and changes on this page.
    [Firmware update information for Consumer Products (TV and DVD/BD)|https://portalcp.toshiba-tro.de/documents/10781/5bafb15d-5e41-46b9-97d2-57dfc56c7699;jsessionid=04184C1F761F1E9B360BF7A6D2 B25D79]
    Unfortunately, for the Smart TV 32RL853B firmware changes are not listed on the page :(

  • EFI firmware update 1.0 not installing

    When I try to install EFI firmware update 1.0 on an Intel Xserve running 10.4.11, the installation proceeds normally and prompts me to reboot upon completion. However, the boot ROM version remains unchanged (XS11.0080.B00) after the machine reboots. Does anyone have any idea why this could be happening? The machine is not booting from a RAID volume, incidentally.

    Apparently, it is necessary to manually power up the machine by holding down the power button until the indicator light flashes in order to activate the firmware update; power cycling the machine remotely with ipmitool does not activate the update. This is not mentioned in Apple's online instructions located at http://docs.info.apple.com/article.html?artnum=306590

  • My MacBook pro did a firmware update now will not accept my password

    My Skype account was hacked so I changed the password for my computer too I did a firmware update the computer started up and went to a black screen asking for my password it does not accept the new or old passwords. I have tried resetting the password with the snow leopard install disc but it will not recognise it and ejects. Please help

    Try image capture (in your applications folder) - or the finder - if neither of these see the card uyou need to try a USB card reader - once you get yoru photos off use the camera format command to erase and reformat the card
    a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card --  I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
    LN

  • SMC-firmware update 1.4 not recognized

    Recently I downloaded the SMC-firmware update 1.4 because my new L-shaped MagSafe power adapter was not working with my computer. For a day or so, I was relieved because the update appeared to fix the charger, but then it stopped working altogether again. After trying multiple methods to fix this (unplugging the adapter, trying different outlets, resetting the SMC, etc.), I discovered that my computer was still running SMC version 1.27f3. I've tried downloading the update manually, but every time it says that my computer doesn't need it. Any advice on how I can actually update the SMC?

    It turns out my adapter was actually broken. I went to the Apple store and they replaced it with a new one. The guy at the Genius Bar said the SMC update was only for MacBooks and that the L-shaped adapters should work with MacBook Pros.

  • When will the firmware update for the Note 4 be released to support the Gear VR?

    I will need to look at purchasing on another device on another carrier depending on timing.    (Cross checking the Oculus and Samsung dev boards as well)

    Mihos wrote:
    Note 4 update just showed up for my phone a few minutes ago.  Installing now. They really need to communicate these things with the support agents so they can communicate better with us.  We need information to make decisions.  I can say right away, a Verizon device will never be my lead platform for development for this reason alone. Especially when the script for response leads to a link to a page that has nothing to do with phones, much less firmware update information.  This is, in fact, the NJ5 update, so it should work, I will verify for the support techs and the community when I get back to the lab. (I eat lunch sometimes, contrary to popular belief.)  Thanks for whoever prioritized this internally.
    Apparently it was JUST released. http://www.droid-life.com/2014/12/10/verizon-galaxy-note-4-update-vru1anj5/

  • After firmware update ipod touch not working with my Sony Home Theater DAV HDX287WC any suggestions

    Is there a solution to play music from my iPod touch on my Sony Home Theater System DAV HDX 287WC after recent firmware/software upgrade? However, I am still able to play music through my ipod classic, but I am really missing the the functionality of the iPod touch with my home theater system.

    - Check to see if there is a firmware update for the theater system
    Sometimes this works but sometimes an IOS update breaks compatibility.
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

Maybe you are looking for