Router looses conection when rebooting laptop

Hi, i have a wrt54g, with a cable modem connection, and every time y reboot my laptop the internet connection is lost. I get a message "connection limited or null", my IP address is not static, can these affect? Thanks

hEy!
actually,,even if your laptop is not set to static it is supposed to get the connection automatically after reboot....
when you hardwire the laptop to the router is it behaving the same way? or if you are connected to another wireless network is it also behaving the same way?

Similar Messages

Wireless Router WRT160N wired to desktop, I loose internet when wireless laptop is off.

I have the wrt160n v2 wireless router, it does not work for me.
If my XP wireless laptop is only powered ON the Vista desktop internet wired will work, I am not wired or wireless using the laptop, not in internet, only powered on.
If the laptop is off I have no internet on the desktop, still plugged thru the router.
The laptop is used and I was unsure if the built in wireless was new enough so I bought a card to go in it for wireless.
When everything is on all is well for playing on the internet times two computers, but if you turn off the laptop I have to plug the internet directly into the desktop to continue in the internet.
I started to work with tech support yesterday and they are hard to understand. I did bring in the newest firmware and still have the problems.
Can anybody help me, I really don't have the time to be on the phone for hours figuring this all out.
Thanks
Jackie
Solved!
Go to Solution.

Well thank you for my promotion to deity status!!!
Unfortunatley my REAL boss at my REAL job probably doesn't read these forums!!!!
And I wish everyone that was having this problem with 160Nv2 firmware could get some kind of compensation from Linksys, but again, unfortunately, I have no control over that, not being a Linksys employee...I had a Cisco CCNA once, but it expired.....and that is as close as I will ever probably come....
Tomato 1.25vpn3.4 (SgtPepperKSU MOD) on a Buffalo WHR-HP-G54
D-Link DSM-320 (Wired)
Wii (Wireless) - PS3 (Wired), PSP (Wireless) - XBox360 (Wired)
SonyBDP-S360 (Wired)
Linksys NSLU2 Firmware Unslung 6.10 Beta unslung to a 2Gb thumb, w/1 Maxtor OneTouch III 200Gb
IOmega StorCenter ix2 1TB NAS
Linksys WVC54G w/FW V2.12EU
and assorted wired and wireless PCs and laptops

I am using the latest iTunes on my laptop without iCloud. I would like to use a different computer on my network at home but I'm afraid I will loose evrything when I install iTunes

I am using the latest iTunes on my laptop without iCloud. I would like to use a different computer on my network at home but I'm afraid I will loose evrything when I install iTunes

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

HT2404 do you loose any info on laptop when you upgrade osx to mountain lion

do you loose any info on laptop when you upgrade osx to mountain lion?

You should not; however, I would not upgrade without having a full backup - just in case.

Hi my iph4s wont turn on or off and seems to be zoomed into a particular part of the screen, loads normally when rebooted the phone. what is wrong with it? and how would i go abouts fixing it?thanks

hi my
iph4s wont turn on or off and seems to be zoomed into a particular part of the screen, loads normally when rebooted the phone. what is wrong with it? and how would i go abouts fixing it?
also recovery mode shows up as a red icon instead of a blue one, not jail broken or had any third party alterations
thanks

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

ITouch only connects to Wi-Fi conflicts when the laptop is connected

When the laptop is connected to the WLAN the iTouch connects and browses with no problem at all. Problem is that when the laptop is NOT on oe NOT connected the iTouch WILL see the wifi signal but refuses to connect. this is obviously a major pain. My friends iPhone finds and connects to the home network without issues - ie regardless of whether the laptop is on or off.
can anyone suggest a remedy? My iTouch is only 24hrs old!
thanks in advance, DM

Here's what's happening in my case. I have a siemens se567 router. I have a LAN with three computers using it. It's encrypted WEP64 bit. Everything is working fine except the new itouch. It connects, shows a strong signal, but won't allow the browser to connect to the internet. It do not have numbers under the DNS or the router. The Apple people I have spoken to tell me it's the router, and to talk to my adsl provider. The adsl provider tells me it's an apple software problem, they can't help. I can connect to any unencrypted wireless network. I can't even manually put in the router numbers. I have unplugged the router several times, but this doesn't help. I'll try your suggestion for "other" and see if that works. Thanks.

WRT110 loses connection when second laptop connects

One laptop can be connected to the router at a time and have absolutely no problems. The problems occur when one laptop is already connected to the router and another one tries to connect to the router as well. When this happens the router completely loses it's connection to the internet. The only way I have found to fix this is to unplug and restart the router, which I shouldn't have to do every single time we want to use the internet. Sometimes it takes restarting it a couple times for it to work. Does anyone have any idea why this happens or what I can do to fix it?
Solved!
Go to Solution.

I had this issue for a long long time. The one thing that I have found to help combat this issue is to make sure that if you are using Vista that IPv6 is off. For some reason when either my roommates desktop, laptop or my laptop has this one it will crash the network. To do this in Vista
1. Click in Control Panel
2. Click View Network status and tasks or Network Connections if you are in classic view
3. Click Manage Network Connections
4. Right click on your Wireless or Hardwire connection however you are connecting to the router and go to Properties
5. Uncheck Internet Protocol Version 6.
6. Hit ok.
7. Reconnect the device to the network.
Initally it may crash the network. Allow the network 5 minutes to attempt to come back up on its own. If this does not work then go ahead and unplug and replug in the router. After the first crash for me it did not happen again.
Hopefully this will help with some of your problems. This is the only thing that I could find to combat the issues that you are describing. With this off we are able to run my laptop, his laptop, his desktop, an xbox360, and a blue-ray player on the network no problem. Good luck and if you have any questions please ask!
Message Edited by bigguy_132 on 01-30-2009 11:09 AM

I can't access to wi fi even though i have a good signal and the router is working properly (my laptop works perfectly)

i can't access to wi fi even though i have a good signal and the router is working properly (my laptop works perfectly)

Try rebooting the router and see if that helps. unplug it from power for about 30 seconds and then plug it in again.
You can also try restarting your iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Linksys router wrt54g works with pc laptop but not mac desktop

i have a linksys router wrt54g. using my pc laptop i configured the router with a wep password. my pc laptop asked for the wep once and has no problems connecting everytime i turn it on. my older(powermac2,1) desktop (mac os x) asked for a wep password i entered one of the four given me by the router and it worked. on later attempts to access the router i have been unsucessful. i am asked for a wep password and when i enter it i am told the password is not correct. when i reset the router, airport has no problem connecting but i have no security. also i can't access the router online like i can with the pc laptop.
can anyone help???
Mac OS X (10.4.8)

try a "$" before your password

How to get sound when my laptop is hooked to my tv w/hdmi cable?

how to get sound when my laptop is hooked to my tv w/hdmi cable? it's a hd tv and my mac's os 10.6.8
tried using an external speaker both w/the computer and then the tv, but neither worked......
Message was edited by: bevmex

Hi,
Open windows Control Panel, open Device Manager and open up Display Devices - make a note of the hardware listed here i.e. ATI, NVidia or Intel.
Next, connect your notebook via HDMI to your Tv. Right click the speaker icon in the Taskbar and select Playback Devices. Left click once ( just to highlight the entry ) the HDMI Output that has the same name as your display adapter and then click the Set Default button - see if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

10.8.1 disables monitors when rebooting in 10.6.8

I just updated Mountain Lion to 10.8.1, When I reboot in my preferred OS (still 10.6.8), I lose the Apple Cinema Display driver and another driver for a cheaper Hanns-G monitor. Before updating to 10.8.1, while in 10.6.8 both monitors worked fine (for years). Each OS is installed on different volumes.
Today that changed. Before I rebooted into 10.8 I had two working monitors when booted in 10.6.8. After updating 10.8 to 10.8.1 I had 2 working monitors in 10.8.1. When I set my startup disk to be 10.6.8 the drivers appear lost (the Apple display works, but with a different looking driver) and the Hanns-G monirot is on, but black!
To test if the monitor was actually working I rebooted into 10.8.1 and both monitors were fine. When rebooted to 10.6.8, the Hanns-G was on, but black.
Does anyone have any idea what's happened? I don't understand how one OS can somehow affect another, even though they both reside on different volumes on different hard drives.
Thanks,
MartyP

Turns out I had to delete from both the Applications folder and an external drive that had a copy of the installer on it. Update notification didn't disappear until I deleted both, emptied trash, and ejected the external drive.

The strap of my bag broke when my laptop was in it, now it is making a buzzing noise all the time and sometimes get a bit warm. I have warranty with protection plan, how do I fix it?

The strap of my bag broke when my laptop was in it, now it is making a buzzing noise all the time when I am using it. I have warranty with protection plan, how do I fix it?

Take it in and have it assessed. They do not have to know about the bag incident unless the explicitly ask for the specific details (like when you are being questioned by a TSA screener, LEO, etc.). As far as you know, the noise started up and it is getting warm. With luck it is just an unbalanced fan that needs replacement.

I downloaded carbon copy. transferred entire internal hd to new replacement HD thru USB. computer booted from replacement hrdrive. then installed replacement hard rive into iMac. when rebooting imac did not recognized new replacement hd.

i downloaded carbon copy. transferred entire internal hd to new replacement HD thru USB adapter kit. computer booted from replacement hrdrive. then i erased the internal hardrive and reloaded the operating system.( i needed to find out if the hard drive was bad or virus/worm was the cause). then installed replacement hard drive into iMac. when rebooting, imac did not recognized new replacement hd. i also upgraded memory at the same time. ok what did i do wrong. do i have to remove the new replacement hardrive to extract the data.

It should not matter. CCC will "clone" the recovery partition as well, but not knowing exactly what operation you had CCC perform it is difficult to know what may have gone wrong - it has many customizable options and you have to choose the correct one.
I have performed the same transplant as you described and didn't have a problem, but if your Mac is not recognizing the internal HD you really have no choice other than to reinitialize it as suggested. After that, install OS X, upgrade to Mountain Lion if required, and migrate your old account(s) from your backup.
my backups have backups.
I assume you didn't mean that literally. Have redundant backups - don't "back up your backups".

Need a router to conect ipad to a telstra 4G usb Sierra wireless "AirCard 320U

need a router to conect ipad to a telstra 4G usb Sierra wireless "AirCard 320U

You need a MiFi. Talk to your cell provider.

I have similar problem, but mine doesn't sound like a loose screw, more like the battery or vibration component is loose. When I shake the phone left to right abit I can feel that it's around the top area. Very annoying, besides that it works fine. Gonna

I have similar problem, but mine doesn't sound like a loose screw, more like the battery or vibration component is loose. When I shake the phone left to right abit I can feel that it's around the top area. Very annoying, besides that it works fine. Gonna go to apple tomorrow maybe to ask.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Router looses conection when rebooting laptop

Similar Messages

Maybe you are looking for