Router not found
Can somebody try and help me please?
Ok here is the problem I have 2 computers in my house. Computer A is the one that I have the Modem and wireless router on. Computer B is the one I have the wireless card in. Computer A was having problems connecting to the internet while Computer B has always been working. We called brighthouse they got the Computer A working then the Computer B will not work. I tried uninstalling the router and wireless cards then restalling then but it is saying that they can not detect a router.
Router model number is: wrt54gs
Router version number is: 6
Wireless card model number is: wmp54g
Wireless card version number is: 4.5
Thanks in advance
Hi,
brighthouse is cable connection, right? in some cases, router will just work automatically with no configuration at all, but there are some cases that u need to enable mac clone on the router for it to work.
Try to ping router...click on start then run, type cmd press ok, then type ping<space>192.168.1.1 if u can get replies good since the router in communicating to the pc...if not there's a problem with the connectivity.
How long have u had the router?
Message Edited by shally on 06-25-2007 07:19 PM
Similar Messages
-
E71 GPS 'route not found' when using device only s...
Hi, earlier today I was getting help to not get AT&T network data charges. I have set everything up per direction but now when I try to search for something and navigate to it I get 'Route not found'. Any ideas how to fix this?
Solved!
Go to Solution.Start with a simple and obvious search string. If you give us an example of a search string that did not work we could have a look at it for you.
-
Hi can anybody help.
I updated my firmware on my N95 recently and now when I try to plan a route a keep getting 'route not found' message.
I can see the local area map when I get a gps connection but if I type in an address , which is not in surrounding area I get the message above. If I move the map pointer in maps around I can move to an area where roads etc disappear.
For example I have my home address in landmarks and my work (approx 10 miles apart) and even though I'm able to see surrounding maps when I'm at either place it will not calculate a route from one to the other.
HelpWe found that the N95 needed to be "on line" before it would calcualte a route.
-
WRT54G3G – "Router not found" when trying to configure broadband cable network
Hi,
I have a WRT54G3G, v.1.1 router. I have used it successfully for ~3 years with mobile Internet (Huawei E800 card). Recently I installed broadband cable network in my place, tried to configure WRT54G3G to work with it and failed…
I tried manual configuration, and I was not able to set it up. I downloaded „Setup Wizard”, and tried all three options:
a) 3G/UMTS or GPRS
b) Broadband WAN Only
c) Broadband WAN and 3G/UMTS or GPRS
Only option a) can be completed successfully. When I try b) or c), I get following message from „Setup Wizard”: „Router not found, Please make sure the router is properly connected and try again.” I am sure I connected all cables as instructed.
When I plug cable network directly to my PC’s Ethernet slot, it is automatically configured, and all is working fine.
Can anyone advise please what to do? Thank you!
Best regards,
Jakub
Solved!
Go to Solution.What is the ip address of your router? It seems like the WRT54G3G is already talking to your modem and is getting the connection properly. Make sure that the WRT is not on the 192.168.1.x segment.
-
Hi friends,
i have created routing for finish product .in MTO senario i went for MRP RUN after sales order is entered. .the corresponding planned order is created . but when itry to convert the planned order to production order a message is coming like <b>routing not found</b>.
so please syuggest what to do?its urgent
feasible answer will be awarded
THANKS & REGARDS
OMOM,
Check whether the routing is having valid status and Usage 1 or 3 - Status - 2 or 4. This you can check in the routing header.
Also check the validity based on Lotsize , whether the sale order quantity is within lotsize mentioned in the header of the routing.
Also check the Validity start date of the routing in the header, the Plannned order start date should be latter than the routing valid start date.
Regards,
Prasobh -
I have read the posts to see if I can find help but everything that has been said I tried.
We have a static ip address 192.168.1--.1-- dashes are actual #'s i left out. I also have mask, gateway, dns servers info. When I run CD say router not found. I also have no connection to internet when all wires are set up properly. "this prevents me form accessing 192.168.1.1 on the internet to change anything. can I take router home and make changes through my home optonline connection and bring back to work. Would that work? Any other ideas.
thanks in advanceIf you are using cable connection in Office also .... then you can take the router at home & configure the wireless router according to Optimum Online .... then again bring it here & connect it ...
Make sure that you should do power cycle .....after connecting the Router here with Modem ..... -
Hi All
well I purchased a 30 day licence on the mapping software and I must say the whole thing seems very buggy when compared to "other" products available.
My Problem is this, I have downloaded the maps via map loader (2 hours for uk!!) but when I go to plan a route I keep getting route not found!!!! any ideas???hell yea! stop buying **bleep**py **bleep** !
just kiddin`
contact the nokia support and see what`s their opinion about this problem. find the support on www.nseries.com ... i`ve heard that they solve most of the problems -
END point URL for ESB Routing service says NOT FOUND
Hi All,
For the routing services in ESB, The link of WSDL is opening up fine, but the link of endpoint URI for the routing service is failing with the message below message. When i invoke the WSDL using SOAP UI, i get back the the same error message. I tried bouncing the server , but of no help. I also notice that slide directory ESB_Projects gives 404 error on any browser.
So when i click below url for any of the routing service
http://<hostname>:<port>/event/<systemName>/<serviceGroupName>/AddressStandardizeRS
I get below error in browser-
Not Found
The requested URL /event/<System Name>/<Service Group Name>/<Routing Service Name> was not found on this server.
Oracle-Application-Server-10g/10.1.3.1.0 Oracle-HTTP-Server Server at odevsoa.local1.wbcgp.com Port 7777Check if the port of ESB in your server is open.
I think that the port is: 7777
try from ESB server:
wget WSDLURI
if you got the file then the port is closed. -
Connection problems after installing wireless router: frequent "Server not found"
I recently got a Linksys wireless router but since then, a lot of webpages show "server not found" frequently. I can eventually open these if I keep refreshing the page or come back to it later. This only happens to my desktop PC connected by a cable but never happens to our 3 laptops with wireless connection. The LAN cable changed but problem persists. Desktop PC swapped but problem still persists. Is this simply a defective router?
What is the model no of the router...?
Try changing the MTU size to 1350 on the router and power cycle the router and check.. -
Firefox (3.6.10) opens websites when hard wired to router, but when using wireless I get message: SERVER NOT FOUND FIREFOX CAN'T FIND THE SERVER AT SEARCH.AVG.COM. My homepage is http://www.google.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official. My anti-virus is AVG free 8.5.448. What can cause this?
If Work Offline is checked in Firefox File, I can get to Google search site. When I un-check it I still get the Server Not Found messageDid you check the connection settings?
*Tools > Options > Advanced > Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can -
I have updated my IOS to IOS 6 of my iphone 4.
When i ask for route between two famous places, it gives reply that direction not found between places.
I dont understand
Whats thisI had the same experience with a new iPhone 5 that I bought last week. Did not have a chance to measure battery life before the 6.0.2 upgrade installed but I set up my phone exactly like my 4S and immediately started running out of power after short periods. Went to Xmas get together with fully charged 5 and 4S. Heading home the iPhone 5 shut down for low battery and the 4S had 65% power. Both phones had two half phone calls on then and no data usage.
That night I fully charged the iPhone 5 and, without lighting it up, put it on my night table. Next morning I picked it up and looked at battery indicator and I had 42% charge with NO activity!
Tried it again next night and wound up with 37% charge. (Slept longer).
Today I called the carrier and reactivated the 4S. Took the 5 to Apple Store and they kindly gave me choice of new replacement phone or refund. I took the refund. Uniquely, the Apple Store said it was Verizon CDMA phones that were coming back.
The are other strings on this with temporary solutions, but from my experience with 7 firmware changes on an HTC 4G phone the problem will continue because the solution will be hardware caused. We are in the days where RTM means Rush to Market - not Release To Manufacturing.
I fear the only solution is to either wait for the next model (I did not notice a really major change in performance over the 4S in LTE heavy Seattle area) - or switch to another manufacturer.
It might be useful for these forums to indicate if you have a GSM or CDMA phone to see which have more problems.
Discouraged.... -
when I enter my router IP address into terminal I get:
host 192.168.X.X
Host X.X.168.192.in-addr.arpa. not found: 3(NXDOMAIN)
On entering this I get
$ hostname
XXXXX-Mac-Pro-XXXXX.local
But when I try to locate host on local I get same error message as IP address
$ host XXXXX-Mac-Pro-XXXXX.local
Host XXXXX-Mac-Pro-XXXXX.local not found: 3(NXDOMAIN)
I'm not sure what is gong on or why, can anyone shed some light on this?Your DNS server does not have a name for your router's IP address.
You DNS server does not have a name for XXXXX-Mac-Pro-XXXXX.local
You can use ping XXXXX-Mac-Pro-XXXXX.local to get the IP address. You can use other utilities to get the IP addresses of devices on your network, such as Bonjour Browser or WakeOnLan -
I can't access router address. "404 not found"
With my Linksys cable modem and wireless router hooked up and running properly, I can't access the router address. I get "File 404 not found" and "The requested URL was not found on this server. " It is the same address as in the Network Preferences window. The wireless router works great and all computers in the network have fast internet access but my boys want to "tweak" the port settings on the router and can't get to them. I've tried resetting the router every way possible but to no avail so I'm wondering if I don't have something
set properly on the network page of OSX. Any help would be appreciated.
Mac-Mini Mac OS X (10.4.4) 1 GB Mem, Pioneer DVR Dual LayerOkay, sometimes routers go weird...so, unplug the router for at least a minute, then plug it back in. When it finishes the startup sequence, try logging in again.
If you ever do get in, there is a firmware update available for your router. The firmware might be corrupted (happens a lot).
http://www.linksys.com/servlet/Satellite?c=LCASupportC2&childpagename=US%2FLayout&cid=1166859837401&packedargs=sku%3DWRT54G&pagename= Linksys%2FCommon%2FVisitorWrapper&displaypage=download#versiondetail -
Server not found
Firefox can't find the server at www.google.com.
* Check the address for typing errors such as
ww.example.com instead of
www.example.com
* If you are unable to load any pages, check your computer's network
connection.
* If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
== This happened ==
Every time Firefox opened
== Approx Feb/Mar 2010Go t0 the following address and post your hardware details and problems you are encountering. Very helpful, knowledgeable folks there.
http://www.practicallynetworked.com/ -
Hello,
I have a Cisco IPS4255 that will not boot an image. I'm seemingly successfully completing a TFTPDNLD each time, but it keeps rebooting with the cannot find image in \ error.
Here is a detailed snap shot:
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
#1- I TFTP image to device which automatically starts the output below:
ENABLING IO-APIC IRQs
Setting 14 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 14 ... ok.
Setting 13 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 13 ... ok.
..TIMER: vector=0x31 pin1=2 pin2=0
testing the IO APIC.......................
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 3000.1599 MHz.
..... host bus clock speed is 200.0105 MHz.
cpu: 0, clocks: 2000105, slice: 1000052
CPU0<T0:2000096,T1:1000032,D:12,S:1000052,C:2000105>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xff648, last bus=4
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.2
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P3) -> 23
PCI->APIC IRQ transform: (B0,I31,P0) -> 16
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B2,I1,P0) -> 18
PCI->APIC IRQ transform: (B3,I1,P0) -> 24
PCI->APIC IRQ transform: (B3,I2,P0) -> 24
PCI->APIC IRQ transform: (B3,I2,P1) -> 25
PCI->APIC IRQ transform: (B3,I3,P0) -> 26
PCI->APIC IRQ transform: (B3,I3,P1) -> 27
PCI->APIC IRQ transform: (B4,I2,P0) -> 16
PCI->APIC IRQ transform: (B4,I3,P0) -> 17
PCI: Cannot allocate resource region 0 of device 00:00.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
Journalled Block Device driver loaded
keyboard: controller not found
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SER
IAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
RAMDISK driver initialized: 16 RAM disks of 30720K size 1024 blocksize
loop: loaded (max 8 devices)
lpc: version 0.1 (Mar 4 2005)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: TOQHIBA THLCD512MBA, CFA DISK drive
hdb: QalDisi QDAF@-510, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 484848 sectors (248 MB) w/2KiB Cache, CHS=481/16/63
hdb: attached ide-disk driver.
hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
hdb: 484848 sectors (248 MB) w/1KiB Cache, CHS=481/16/63
Partition check:
hda: hda1 hda2 hda3 hda4
hdb: hdb1 hdb2 hdb3 hdb4
ide: late registration of driver.
SCSI subsystem driver Revision: 1.00
i2c-core.o: i2c core module version 2.8.7 (20040611)
i2c-dev.o: i2c /dev entries driver module version 2.8.7 (20040611)
i2c-proc.o version 2.8.7 (20040611)
i2c-i801 version 2.8.7 (20040611)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 26522k freed
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 136k freed
init started: EXT2-fs warning: checktime reached, running e2fsck is recommended
BusyBox v1.00-rc1 (2005.03.04-09:39+0000) multi-call binary
init started: BusyBox v1.00-rc1 (2005.03.04-09:39+0000) multi-call binary
Starting pid 10, console /dev/ttyS0: '/etc/init.d/rcS'
Recovery version 1.13
Started on Sun Mar 7 05:17:41 UTC 2010
Full system recovery
A
Please press Enter to activate this console.
tarting pid 86, console /dev/ttyS0: '/bin/sh'
BusyBox v1.00-rc1 (2005.03.04-09:39+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
#2- I’m not a unix/linux person so I don’t have the knowledge to fix the “hdx” errors above, so after reboot it goes to “rommon”
Booting system, please wait...
CISCO SYSTEMS
Embedded BIOS Version 1.0(10)0 03/25/05 22:42:05.25
Low Memory: 631 KB
High Memory: 3968 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 00 00 8086 2578 Host Bridge
00 01 00 8086 2579 PCI-to-PCI Bridge
00 03 00 8086 257B PCI-to-PCI Bridge
00 1C 00 8086 25AE PCI-to-PCI Bridge
00 1D 00 8086 25A9 Serial Bus 11
00 1D 01 8086 25AA Serial Bus 10
00 1D 04 8086 25AB System
00 1D 05 8086 25AC IRQ Controller
00 1D 07 8086 25AD Serial Bus 9
00 1E 00 8086 244E PCI-to-PCI Bridge
00 1F 00 8086 25A1 ISA Bridge
00 1F 02 8086 25A3 IDE Controller 11
00 1F 03 8086 25A4 Serial Bus 5
00 1F 05 8086 25A6 Audio 5
02 01 00 8086 1075 Ethernet 11
03 01 00 177D 0003 Encrypt/Decrypt 9
03 02 00 8086 1079 Ethernet 9
03 02 01 8086 1079 Ethernet 9
03 03 00 8086 1079 Ethernet 9
03 03 01 8086 1079 Ethernet 9
04 02 00 8086 1209 Ethernet 11
04 03 00 8086 1209 Ethernet 5
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(10)0) #0: Fri Mar 25 23:02:10 PST 2005
Platform IPS-4255-K9
Management0/0
Link is UP
MAC Address: 000f.f775.7e24
Use ? for help.
rommon #0>
#3- If the TFTP is rerun the entire cycle starts again.The IPS 4255 sensor appliance has only a single 512 MB internal CompactFlash module for storage by-default, so this part of the output you posted is interesting:
hda: TOQHIBA THLCD512MBA, CFA DISK drive
hdb: QalDisi QDAF@-510, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 484848 sectors (248 MB) w/2KiB Cache, CHS=481/16/63
hdb: attached ide-disk driver.
hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
hdb: 484848 sectors (248 MB) w/1KiB Cache, CHS=481/16/63
As it appears that two (2) 256 MB ("248 MB") storage devices are being detected (despite the model of the first even containing "512MB" in its name).
I'd recommend double-checking that there is nothing installed in the "External compact flash device" slot located on the back of the appliance. See here for reference: http://www.cisco.com/en/US/docs/security/ips/7.0/installation/guide/hw_installing_4240_4255.html#wp2726
If there is a CompactFlash module installed there, eject and remove it, then power-cycle the appliance and attempt the re-image ("recovery") process once more. If the boot output still contains the same errors for hda and hdb, then it is probably a failing/failed CompactFlash module, so an RMA will likely be necessary to resolve.
Maybe you are looking for
-
LASERJET P2015-PROBLEMS WITH PAPER FEED
We have a HP LaserJet P2015 in the office. When the paper reaches the halfway point, the printer makes a horrible sound and will not feed the paper. Anybody have any suggestion?
-
Hi for all. I'm need create a object with "dynamic" name. For example Object ABCi = new ... where i is a indice. Please, help-me
-
Panel Width Stays Fixed in 64-Bit but not 32-Bit
Hello all, I've recently installed Configurator 1.0 and created my first panel as a collection of menu commands and tools I most often use. The panel is 800x130 (HxW) pixels. I'm running Vista 64 Ultimate with PS CS4 32-bit & 64-bit installed, and ha
-
ITunes screws up sort order and randomly screws up volume level
I'm really starting to regret replacing my 5g video with the classic. The video out issue is one problem, but my biggest issue is my Media Monkey isn't compatible and I had to go back to iTunes. First off I hate using iTunes to manage content. The fo
-
WLC 5508 , AP client dhcp address different from WLAN interface VLAN subnet?
Hope the title makes sense, here's my situation: I have multiple businesses on 1 WLC 5508, there's a LAG to my core switch with seperate interfaces for each, broken up by vlans. My question is: if i have a WLAN setup to use interface "Company A" whic