Router opens ONLY ROMMON??!!
Hello,
I have a problem i need help with, i got i cisco 2600 series router recently which is used,when i first started it ,the console screen goes only to ROMMON and can't boot from the IOS image, this is what iam getting : and i also wanna make sure that this is not because this is no flash and/or NVRAM in the device installed so i looked up a picture for the back of it online and it looks just like mine so i thought this is normal i attched this picture here with this message...Any ideas?
Thank you.
System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
C2600 platform with 131072 Kbytes of main memory
device does not contain a valid magic number
boot: cannot open "flash:"
boot: cannot determine first file name on device "flash:"
System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
C2600 platform with 131072 Kbytes of main memory
device does not contain a valid magic number
boot: cannot open "flash:"
boot: cannot determine first file name on device "flash:"
System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
C2600 platform with 131072 Kbytes of main memory
rommon 1 >
Duplicate post. :P
Similar Messages
-
Safari (Mavericks) will open only Google-related pages
I have a 13" Retina MacBook Pro running Mavericks... as of this morning, Safari suddenly will open ONLY Google-related pages (e.g., gmail and google maps). All other websites I try result in the gray page that says, "Safari can't find the server."
The other odd thing that happened this morning (preceding use of Safari) was that when I turned on my MBP, the wireless connection would not connect to my home network. That was temporary--it eventually connected to the network, but then even though it was connected to the network, it could not access the internet connection. All of that then resolved itself (I reset modem and router) and those connections resumed functionality. But then I could not access any web pages, as per my comment above, EXCEPT for Google-related pages.
Steps I have already taken in attempt to resolve:
booted in safe mode
cleared Safari cache
Removed all website data
under Proxies on Preferences -> Advanced tab, selected Auto Proxy Discovery
unchecked and re-checked the Fraudulent sites warning check box on Preferences -> Security tab
Does it have something to do with the Google Safe Browsing Service? Seems so odd that ONLY Google pages will load...
Thanks for any help!In Recovery Mode, Safari opened every page I tested--i.e., including non-Google pages.
Just rebooted as usual, and Safari is doing the same thing as before--opening only Google-related pages.
Hold the phone... Hallelujah! I just noticed that my Calendar app had not updated with an event I had entered into Calendar via a different device--it should have updated the Calendar on my MBP, since I use iCloud to keep Calendars in sync. I tried Refreshing Calendar several times--no change.
So then I went to Settings -> iCloud to sign out of my iCloud account and sign back in. It wouldn't let me sign out -- got the spinning ball and eventually had to force quit everything, then restart the computer. Went back to the iCloud settings, was able to sign out, and then it told me I had no Internet connection to sign back in. This wasn't really true, since I was able to connect to my gmail via Safari... I followed the prompts, anyway, to diagnose and reset the network and internet connection. Signed back in to iCloud, and voila, Safari started working! [I'm guessing the issue had less to do with iCloud, and more to do with network settings...?]
Thanks for all of your help. Hope this might help someone else! -
Itunes wont open only exclamation point inside red hexagon in the message
itunes wont open only exclamation point inside red hexagon in the message
I try updating it to itunes 6.04 but the disk image shows no data for itunes. I tried the /by host/ folder and didn't work. i tried forcelly opening in the terminal also and nothing.
After restarting several times now is giving the softwear agreement for itunes message before the message with the exclamation point.
IF ANY ONE COULD HELP, PLEASE! -
I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!
Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.
-
Purchase orders : Open and Completed,Open Only,and Completed Only
Hi Friends,
I have got a new requirement in Existing report I have to add few fields Like :
Slectio screen will be :
Purchase orders :
Open and Completed only
Open Only
Completed Only
When I select open and Completed only, it display only those purchase orders.
if i select Open only, it should display only open purchase orders, Like wise for Completed .
Could you please from which table i can find out the purchase is open and completed, or open only, completed only?
Could provide me the fileds for
Open and Completed only ?
Open Only ?
Completed Only?
Regards,
Xavier.PHi Xavier ,
Purchase orders :
Open and Completed only -- All PO in EKKO Table
Open Only -- Table EKPO for which Final Invoice Indicator(EREKZ) is not set
Completed Only -- Table EKPO for which Final Invoice Indicator(EREKZ) is set
Regards
Ramesh Ch -
Browser will open once and open only one page. It closes but then won't open again. How do i fix it?
In the last 24 hours my browser will open only once and go to only one site i choose. after that , i can go to another site but links won't open or anything else. After i close the browser , so i can restart it, it tells me firefox is already open. Problem is it never shuts down in the background. I have to use the task manager to shut it off so i can open it again. Funny thing is that internet explorer, works fine but i don't want to use it. I even tried reinstalling firefox but it did not work. I had to post this on a different computer as well.
https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit
-
All my Adobe Reader (PDF) files are opening only in the secondary monitor by default, as I am workin
I am using Adobe 8 Professional and working on Windows XP. I have been facing an issue lately with opening files in a dual-monitor environment. All my Adobe Reader (PDF) files are opening only in the secondary monitor by default. There are times when I work only in one monitor and when I open a PDF file and want to have a look at it, I have to connect another monitor to view that file, since this file is open in the secondary monitor. It is very disappointing with such instances happening with Adobe (a leading organization). Can you please help so that the Adobe Reader files open in the primary monitor by default?
On a Windows system disable the preview of Windows Explorer.
-
Good afternoon ladies and gentlemen!
My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In the settings Adobe Bridge - in "open RAW-files by double-clicking in Adobe Camera Raw» box is checked. When you try any changes in the settings Adobe Bridge system displays a message:
Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature.
The entire line of Adobe products on my computer updated to the latest updates. Previously, a family of products Adobe Photoshop on your computer is not set. Computer - PC, Windows 7 Enterprises.<moved from Adobe Creative Cloud to Bridge General Discussion>
-
In safari browser cookies is working fine. But when I add the browser url to the screen then the cookies concept is not working. In safari setting cookies is always open only. Can you please provide any information regarding to this?
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you. -
PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?
PS Elements 10 preinstalled on my new computer with Windows 8. It worked fine for a week, now opens once, then won't open again, or doesn't open at all. Adobe gives no support to fix this (they told me to research the answer on their site), yet their info says PS 10 and Windows 8 are compatible. Automatic troubleshooter gives non-compatibility message. Can this be fixed? Have spent many hours trying to figure this out. Uninstalled and reinstalled. Nothing works so far.
Thank you for your help. I tried ctrl-alt-shift, and it worked a few times, but not every time. After trying your suggested fix, here's what I've since found that works - so far - today.Open Task ManagerClose PS Elements 10Close Task ManagerLaunch PS Elements 10 Please keep in mind that I was closing the program the usual way (from the program) all along. I used an older version of PS Elements for years on my old computer (Windows XP), and never had a problem launching or closing the software. This problem came about on a new computer with PS Elements 10 and Windows 8. No other versions of PS Elements were installed on the new computer, nor were any settings brought over from the old computer. Again, thanks for your input. Will keep your suggestion in mind for any future troubles with Adobe products.
A Digiovanni
Date: Fri, 11 Jan 2013 00:51:43 -0700
From: [email protected]
To: [email protected]
Subject: PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?
Re: PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?
created by c.pfaffenbichler in Photoshop for Beginners - View the full discussion
Good day! You may want to post on the Photoshop Elements Forum. http://forums.adobe.com/community/photoshop_elements In general trashing the Preferences (by keeping command-alt-shift/ctrl-alt-shift pressed while starting the application) can be helpful with malfunctions in many Adobe applications. Regards, Pfaffenbichler
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4985553#4985553
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4985553#4985553
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4985553#4985553. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop for Beginners by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
My mum has an iPad 1, the email programme will not open properly. If you click on the icon it opens only for a few seconds but then shuts. In that few seconds you cant select anything that you see on screen. Any ideas? Thanks
If the Reset Ian mentioned doesn't work...
Shut down and restart the Mail app...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red to delete the Mail app from this list.
- Press the home button twice when done.
- Restart the Mail app -
Our company moved from on-premises Exchange 2003 to Office365 and only have 4 Exchange 2003 servers on-prem that we use for Routing email from application servers to Office365. We need to migrate these servers to Exchange 2010 then to Exchange 2013 and
only route email only. Is it possible to upgrade to Exchange 2010 by installing the transport Hub & Mailbox server options only? Our OAB and EWS services come from the CAS servers located on Office365 so we should not need a CAS server to set up Transport
rules or route mail would we? Any assistance with this would be greatly appreciated! - Thanks, DWB
DaveSince it is not internet facing we will not have to worry about configuring an Internet Domain Name when installing the first server, correct? in my planning I was going to
install the Exchange 2010 CAS/Mailbox/Transport Hub roles on one server, then upgrade it to Exchange 2013. Once this is completed I'll then install the 2 mailbox role servers in one Datacenter, and 3 more in our DRP DC. If something happens to the
primary Datacenter I would want it to fail over to the other site. For this I would have to install another CAS/mailbox server in the secondary DC. Would this plan sound about right? Since we moved to Office365 in 2010 I have not had a chance to deal with
actual servers except for the Exchange 2003 servers we still have on-premises. Each of these are located in 4 Regional offices along with single Windows 2008 R2 servers using only the IIS SMTP service for routing mail from on-prem application servers
and print/scanners which email back to the users. The plan is to move to a routing system which will provide both MTA and redundancy if one has an issue.
Dave -
Photoshop CS5 opens only once!
I have photoshop CS5, it's trial now. Everytime I install it, it opens only once then everytime I open it again it just immediatly closes. The only thing that gets it to work again is uninstalling it then reinstalling, which gets it to work also 1 time no more. Someone told me it's caused by wrong serial jumber, but I'm on trial.
I have Windows XP SP2, AMD Phenom II X2 550, Built-in GFX 760G "I think it's ATI 3000 or 3200"
Any help would be great as I can't really use it by uninstalling-reinstalling everytime.Something to try, if you're willing to go through the installation one more time...
When you get it open, go into Edit - Preferences - Performance, and disable OpenGL.
If it continues to work after that, check for updated video drivers.
There's a registry tweak that will prevent it from even trying to use OpenGL... It's in a set of optional files for CS4, but it can be modified to work for CS5 by changing all occurrences of 11.0 to 12.0. Search for DisallowOpenGLWindows_ON_D on this site.
-Noel -
FIREFOX OPEN ONLY HALF ON MY LAPTOP SCREEN REST IS BLANKC
firefox with yahoo home page opens only half way on the laptop screen. That is first half of the laptop screen is blank while the yahoo window will start on 2nd half horizontally. all web sites will also be displayed on half of the screen (2nd half). in case of other browsers such as internet explorer or chrome all web windows will display fully on the screen.I tried to uninstall and reinstall the Firefox but the problem has persisted. so much so i have stopped using FIREFOX FOR BROWSING. KINDLY HELP IN TRACING THE FAULT.
-> Tap ALT key or press F10 to show the Menu Bar
-> go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. Now do this:
-> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
-> go to View Menu -> Zoom -> click "Reset"
-> go to View Menu -> Page Style -> select "Basic Page Style"
-> go to View Menu -> Toolbars -> unselect All Unwanted toolbars
-> go Tools Menu -> Clear Recent History -> ''Time range to clear: '''select EVERYTHING''''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies & Cache''' -> click "Clear Now"
-> go to Tools Menu -> Options -> General -> ''When Firefox starts : '''select "Show My Home Page"''''' -> Type the address of the website which you want to be your HomePage e.g. http://www.google.com
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Use custom settings for history"''' -> REMOVE Checkmark from "'''Permanent Private Browsing mode'''" -> place CHECKMARKS on:
1) Remember my Browsing History 2) Remember Download History 3) Remember Search History 4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
-> REMOVE CHECKMARK from CLEAR HISTORY WHEN FIREFOX CLOSES
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
You can enable your Known & Trustworthy Add-ons later. Check and tell if its working. -
Anyone, pls help - my ipad is not opening, only apple logo is flashing on and off... :( pls help
anyone, pls help - my ipad is not opening, only apple logo is flashing on and off... pls help
Have you tried rebooting your iPad?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that does not work, you can try restoring your iPad iOS Software.
iTunes: Restoring iOS software - Support - Apple
Make sure that you read the article all the way through and pay attention to the last part that talks about using recovery mode.
Maybe you are looking for
-
Aggregates on Non-cumulative InfoCubes, stock key figures, stock, stocks,
Hi..Guru's Please let me know if anybody has created aggregates on Non-Cumulative Cubes or key figure (i.e. 0IC_C03 Inventory Management.) I am facing the problem of performance related at the time of execution of query in 0IC_C03.( runtime dump ) I
-
ALV - access to protected method
Hello, I have a object from class "CL_GUI_ALV_GRID" and want to change the protected attribute "EVT_DELAYED_CHANGE_SELECTION Constant Protected" with the method CALL METHOD alv_grid->SET_DELAY_CHANGE_SELECTION EXPORTING time
-
Portege R600 Built-in HDD Error
My Portege R600 has been working fine until today when it came up with the message "Built-in HDD error" when I switched it on. It then lists the following: Intel(R) Boot Agent GE v1.3.24 PXE-E61: Media test failure,check cable PXE-MOF:Exiting Intel B
-
When I try to launch my copy of PSE it tells me that licensing for this product has stopped working. Error code 150:30. Restarting does nothing. Any ideas? Thanks!
-
Hello, I have a need where based on the contact method the time zone field needs to remain grayed out. For e.g. in the code snippet below, if user select pref_method as 'EMAIL' then the TIME_ZONE field needs to be UPDATE NOT ALLOWED. If the user sele