Router Reset and Admin/PW Not working
I'm trying to get to my router through my webbrowser. I put in the address and it asked for my username and password. I left the name blank and tried "admin" as the password but it didn't work.
I tried a whole bunch of different things after that: admin/pw/password/blank and all in different varriations. But still no luck.
I read on the forums here that I shoudl reset my router, so I held in the button for 30 seconds and it reset. I know it did becuase for my computer to get an internet connection it no longer needs the encryption that the router used to have.
Since the router was reset, I went back and tried 'admin' as the password, but it STILL did not work.
Anyone have advice?
Try disabling ALL software firewalls, antivirus software and any Proxy cache settings you have in your Web browsers
Regards Simon
NAS: TS-459 Pro - 3.6.1 Build0302T - 4 x 1TB Samsung HD103SJ : EXT4 - APC ES 700VA UPS
QPKG: WordPress 3.4, TwonkyMedia 6.0.39 QPKG - Zenphoto1.4.2.1 [7802] - phpMyAdmin v3.3.10
Network: Netgear DG834G V4.01.40 - DGTeam Rev. 0849 -> Cisco RV220W 1.0.4.13, Cisco SLM2008, Dlink DSM-520, Xbox360
Similar Messages
-
Our wifi is grayed out on our mini ipad; I have tried resetting network settings and that did not work. Any other suggestions?
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
Cheers, Tom -
My older nano is not working. I have to keep it plugged in all the time because it does not shut off. The buttons only work sometimes and then they scroll and skip forward and backward by themselves. I have checked updates and I have also reset it back to factory and it is not working.
Hello mistymorrill
If after all that you have tried and your iPod nano is still not working, the refer the page below for further options.
Service Answer Center – iPod
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
How do I sign in when I don't know the password? I have tried reset and that did not work.
How do I sign in when I dont know the password? I tried pushing reset and that did not wprk.
Please try the steps mentioned in this article and see if that helps.
If my post answers your question, please mark it as "Accept as Solution" -
Loss of sound (Hard-reset and restore does not work)
Hi,
I loss all sounds on my iPad 2 (currently on iOS 7.04). This is the 2nd time I have had this issue (had it with an earlier iPad) and had to replace the previous one (out of warranty period). Very frustrating as it is about the same time period after purchase. Last time, it seemed like a repeated fault with the iPad and I cannot believe I have the same issue again on a different product. It is an expensive way of having to re-buy every couple of years for no other reason.
It did not happen immediately after an update i.e. it does not appear to be "update" or iOS version-related.
Anyone got any advice please? The facts are as follows (and what I have tried).
When it happened?
I was in iMovie editing a movie when all sound went from the speaker. It continued to work with earphones plugged in, but this is now intermittent. I have no sound on the speaker at all except for when I click sounds on the menu and change the level of ringer alert (which works on the speakers). This seems to tell me that it is a software problem. I have no sound on any applications or internet video or music from iTunes. I cannot survive on the earphones as they only work for a period of time and then they fail (until I take the jack out again when it works again for a period of time before the headphones fail again).
What have I tried?
a) Numerous hard resets
b) changing the side switch's position
c) changing in general settings the side switch settings from lock rotation to mute and back again (repeatedly and in reverse to see if it makes any difference)
d) resetting all settings - this made no difference
e) erase all content and settings - interestingly at the stage when it asked me if I wanted to restore from an iCloud account, it was making sounds (the keyboard clicks - which don't make a sound irrespective of the click setting currently) i.e. appeared to have resolved the issue and as soon as I restored my iCloud back-up, the sound went again.
I would be grateful for any suggestions. This post also includes a recommendation to Apple on improving its product (relating to iCloud backups) as the ultimate solution should not be paying for a replacement for a software issue (to avoid losing all my data permanently).
My musings are that:
a) it is definitively a software issue (on account that the speakers work in certain situations only)
b) it appears to be that the software is corrupted in my iCloud back up
c) it is an issue that happens regularly and is an avoidable issue/cost to Apple's customers that needs to receive higher priority in being addressed as it is built in redundancy for a significant proportion of customers. At the very least, iCloud backups should be capable of being restored in part - is there any way this could be done so we don't lose all of our notes, media etc if the final advice is to "start again". How can it be right to lose all content because of an Apple system software issue? I am pre-guessing this will be the final advice (if I don't want to pay for a replacement iPad)?
Please help me and all those others with the same avoidable software problem.
Thank you,
PeterThis is an iPad user to user forum, so you are not addressing Apple.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
Cheers, Tom -
i can not seem to figure out why my phone will not turn on i have tried the master reset plugging it into a computer and the wall charger it does not seem to be doing anything can anyone help please
you have to restore the device via itunes
-
Please help
Power the device off and restore it through iTunes.
http://support.apple.com/kb/ht1808 is the article to read, you will need to use the recovery mode section. -
I lost complete power on mynmac pro. Dead. Can you help?
Help with what, exactly? If it will not power up from either battery or adaptor, then take it in for service.
-
Sound, Restarting and Email Msgs not working
Recently I have had problems where the sound just stops working. The profiles are not changing and it works for awhile, but then I start to notice the red light flashing and no sound. The only way to get it back is to do a hard reset (I've found).
Also, my phone decides to restart a lot . . . why and how do I get it to stop?
This morning, going into my messages folder where all my notifications go, I can click on any type of notification to see it, except for the email messages. I click and it just does nothing. I've already tried reseting and this has not worked.
Please help!It's ok, I fixed it.
I got an iPhone 5. Bravo to apple for making me buy another one of their products. -
I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. They did before hooking up the iMac. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas? I have tried unplugging, restarting, and resetting. No luck! Thanks!
You should probalby contact Netgear
-
PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore. Just get an Apple Logo then a flashing blue screen as if it is caught booting up. This has happened twice before and iTunes restore fixed it. But this time device not appearing in iTunes.
Running iTunes for PC. But as stated restore has worked before! Any help greatly appreciated!!Place the device in DFU mode and let iTunes restore the device to factory condition.
-
Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
Cheers, Tom -
Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?
Make sure the silent switch is not set to mute. If you can see the red dot, it is on mute.
It may think you have headphones plugged in, try plugging and unplugging a wired headset a few time.
The next step would be to restore as new.
If none of that works, a warranty exchange would be the resolution. -
G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help! Pressed pmu button already, nothing ,.. Ppc g4 Mac
Should I check the memory cards themselves? Reseat them?
Yes.
Memtest X or Rember to test the RAM.
Reseat is also good.
The iPhone 4 doesn't like USB 1.1 much.
after the update the computer was working well, except for this freeze when ever I connect iPhone.
I'd try USB 2.0 PCI. That's how I connect my iPhone 4s, and have connected all iPhones and iPods, to my G4.
Never an issue.
Can't say the same for USB 1.1.......
The above (previous post) linked PCI card is cheap enough.
Want cheaper, try this:
http://www.amazon.com/Protronix®-5-Port-Controller-Card-Chipset/dp/B005JE2U82/re f=sr_1_2?ie=UTF8&qid=1337472141&sr=8-2
The NEC chipset is the desired chipset, regardless of what OS the maker says is compatible.
OS X has native NEC chipset USB support.
Maybe you are looking for
-
I have an eMac 1.25Ghz with 1GB RAM, running 10.4.9. It just started freezing lately, and it seems to be getting worse. The only way to restart is to hold the power button. I actually got it to freeze while the activity monitor was on, and no unsusal
-
Using Javascript to rasterize a layer and maintain its position with other layers.
Trying to use javascript to rasterize just the contents of a certain layer by its name. It needs to maintain its position. I've sort of cobbled a script, but it keeps moving the rastered art to the top layer. Ex, top down i have Layer 4, RasterizeMe,
-
Importing WebService class into Forms10g
Hi , I want to import webservice from Jdeveloper in Forms10g.I am using Jdeveloper 10.1.3.4 complaint with JDK 1.4. When I import the class in Forms10g from Jdeveloper it gave me error: Importing Class Proxy.classes.oracle.srtutorial.datamodel.proxy.
-
Reset Time Capsule Password - Will No Longer Back Up
Any help greatly appreciated. I changed my TC password and now the machine will no longer back up information. If anyone has experienced this issue, advice would be appreciated.
-
Help with loading pictures in my organizer from elements 9 trial version
I downloaded Trial Version of elements 9 last thursday. Since then I am trying to get someone at Adobe to tell me why, when I open Organizer there are NO pictures from my Pictures Albums. No help from them because they do NOT service "trail version