Router set up help

i have a dsl modem hooked up to a netgear wireless router wgu-624 in one part of my house and have a linksys wrt-54g setup in another part of my house  and i need to get internet wirelessly to a computer that is wired to the wrt-54g can anybody help me to get this to work ? im lost

The WRT54G will not do the job you described.  The WRT54G is designed to generate a wireless network, not to connect to an existing wireless network.
What you need is a wireless bridge, such as the Linksys WET200 or the WET54G.  Or alternatively, a wireless adapter for your computer.
One other option is that there might be third party firmware that could convert your WRT54G to a wireless bridge.  However, if you use third party firmware, you will void your Linksys warranty.

Similar Messages

  • E3000 Router Lock Out - HELP!!!!

    Ok per tech chat yesterday they told me I'd have to uninstall and reinstall the Cisco Connect Software AFTER resetting my router.  So I uninstalled the software, reset the router (with the power on I assume) and then when I tried to get back into my router I couldn't  The Cisco Connect software tells me that the router is already configured (and doesn't install) and because I had changed the password, there is no easy setup key to use.
    THe error I get from the Cisco Software is:
    Error code: 82BD0100
    Error description: The administrator password is incorrect.
    Model name: unknown
    Model number: E3000
    Serial number: unknown
    Firmware version: unknown
    Operating system: Windows XP SP 3
    Software version: 1.1.10049.0
    Connection type (WAN): unknown
    IP address (LAN): unknown
    IP address (WAN): unknown
    Computer IP address: 192.168.0.102  ==> Becaues my DSL is 192.168.1.1 the router sets itself to 192.168.0.1
    I have tried nothing in the login and admin in the password, I have tried my old admin password and NOTHING works.
    So right now I can't get INTO the router to set up anything, which means I have no idea on the Wireless keys etc.
    Did I reset the router correctly with the reset on the back with it powered on?
    I was on the phone with tech support for like 25 minutes and I have to get on a conference call.
    ANY HELP WOULD BE APPRECIATED in getting this back to where I can get into it.

    Nevermind...I got it.
    I had to connect to the router by itself first (because my DSL modem is 192.168.1.1) and then type in the password in the web interface.  Then I reset the IP to the 192.168.0.* subnet and connected it back up to the DSL modem.  I'm back in but quite a few gyrations.
    Of course the Cisco COnnect software will no longer install but oh well.

  • OWB ProcessFlow (ROUTE/SET STATUS)??

    OWB ProcessFlow (ROUTE/SET STATUS)??
    We are using OWB repository 10.2.0.2.0 and OWB client 10.2.0.2.8. The Oracle version is 10 G (10.2.0.2.0). OWB is installed on Sun 64 bit server.
    I learned that ROUTE/SET STATUS usage in ProcessFlow have some issues. How do we use them?
    I find limited details on this under OWB processflow help.
    Did any one in this forum face such issues?
    Any idea?
    Thanks in advance.
    RI

    Hi,
    Have you tried using an Oracle Scheduled Program to execute the batch, and then just calling the Scheduled Program from OWF?
    Regards
    Steven

  • EA3500 Set Up Help

    I am trying to set up a new EA3500 and am having problems.  I have tried to run the Lynksys software (file version 2.0.12304.0 dated 10/31/2012) and it states it cannot find the router (Error code 0x82BF010F).  I have tried to use the web based set up page and it also does not see the router.  However, the router is working as my wireless devices are picking it up as an unsecured wireless network with the name 88A.
    I have an old Linksys WR54G that is working fine on all of my wireless devises - so I know it is not the computer.
    Any help getting this router set up with a name and password would help.  Thanks

    Thanks for the response.  But the ethernet would not work either.  After working with Linksys support we dtermined that there was a conflict with a Linksys WRT54G.  It appears that everything is working now.

  • My wifi is greyed out my bluetooth n hotspot is not working and its showing problem in resetting all setting plez help.. :(

    my wifi is greyed out ..my bluetooth n hotspot is not working and its showing problem in resetting all setting plez help..

    Hello Prakharfromindia,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/ht1414
    Have a nice day,
    Mario

  • How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?

    How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?
    CS 5.0 launches the internet browser.  > TO SLOW I DONT WANT THIS.
    CS 3.0 uses the local help files > I WANT THIS FOR 5.0.

    You're not speaking to the right forum for your request. Help is a Suite-wide feature and here is the forum where the Help application is discussed, and where the proper Adobe people hang out:
    Community Help Application

  • How to set F4 help for an inputfiled of BSP page?

    hi friends,
    I have to set F4 help for a Field in my BSP page. for this i am doing like this.
    Oninitialization Event....
    tables : t001p ,pa0001 ,t554t.
    data : begin of it,
            awart like t554t-awart,
            atext like t554t-atext,
           end of it.
    data : it_t554s like it occurs 0 with header line.
    parameter : k_pernr like pa0001-pernr.
    data : werks like pa0001-werks,
           btrtl like pa0001-btrtl,
           abs_grp like t001p-moabw.
    clear it_t554s.
    refresh it_t554s.
    select single werks btrtl into (werks ,btrtl) from pa0001
                        where pernr = K_pernr.
    select single moabw into abs_grp from t001p where
                              werks eq werks and btrtl eq btrtl.
    select awart atext from t554t into corresponding fields of it_t554s
                                   where moabw eq abs_grp..
    append it_t554s.
    endselect.
    now it_t554s contails the values to display F4 help in BSP page inputfield.
    how to assign this as F4 help to inputfield....
    I saw some threads. It's getting me to confuse...
    I am new to this topic...
    plz help me.........
    Regards,
    Shankar.

    solved

  • I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

    I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

    Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

  • HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

    HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

    Hi,
    Can you confirm that you have an Officejet 8500a or Officejet 8500? On the 8500a model, you can set the networks proxy address and port setting from the front panel of the printer (setup>Webservices setup>proxy). If you are unsure what your proxy settings are you'll need to contact your network admin. If your network uses a proxy users name and password for all devices, you need to enter this information along with the proxy address and port in the printers embedded web server. Type the products IP address into an internet brownser window (printer must be connected to the same network as PC). Select the network tab, and than look for the proxy settings option. Enter in the information and click apply. Once the networks proxy information has been correctly inputed into the embedded web server, try printing again. If unsuccessfully, you might try reinstalling the printer software after uninstalling it. Hope this helps!
    I was an HP employee
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

  • Hi, I have a power Mac G5 with an airport card and I am having a hard time connecting to my regular NETGEAR router. Any help, Hi, I have a power Mac G5 with an airport card and I am having a hard time connecting to my regular NETGEAR router.PLs help

    Hi, I have a power Mac G5 with an airport card, MAc OS X 10.5.8, Wireless card is Airport Extreme ( 0x14E4,0x4E ) and I am having a hard time connecting to my regular NETGEAR router.  PLS Help,
    Thanks,
    Mishcadola

    I spent 2750 $ for my 24" iMac (price for my region)...
    And the perfect world of Steve Jobs still close, but never we've been in there!

  • I updated ipad 4.3 to io7 but now when I go to set up it keeps asking me to restore - I have done this from itunes several times but it still gets stuck at this point in set up - help!

    I updated ipad 4.3 to io7 but now when I go to set up it keeps asking me to restore - I have done this from itunes several times but it still gets stuck at this point in set up - help!

    All media and apps should be in iTunes on the computer.  Simply select the content desired to sync to the device and sync it.
    FYI, backups have never included media or apps.
    Downloading past purchases from iTunes

  • I have a iphone 6 wont take all calls says mail box not setup but is set up help please

    i have a i phone 6 wont take all calls says mail box not setup but is set up help please

    Hello ram tough,
    Thanks for the question. After reviewing your post, it sounds like the iPhone is not receiving some calls. Are you having trouble with visual voicemail? I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
    If you can't make or receive calls on your iPhone - Apple Support
    Get help with visual voicemail on your iPhone - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Creating a score set - please help- I'm going crazy

    OK- deep breath ...........I'm trying to create a score set for 4 instruments. I read the manual, then tried everything on p 765........... I started first with the tracks in the Arrange area.- with and without rubber bands - and because this didn't work, I scrubbed this and tried to simply set up thew score in the Score Editor.
    It didn't work. I want to be able to see the music for 4 instruments - at one go -in the score editor. Is this possible ?
    Please someone save my sanity and give me an blow- by- blow account how to achieve this. I've been on this for hours and can't see the wood for the trees now so am going out for a breath of fresh air.
    Kay.

    You can look at the bottom of the arrange page.. But for 4 tracks I would open a score editor window by itself.. The score section is complex and not intuitive to say the least..
    In the score editor, click on the 6th from the left box. it looks like a page of text (when you highlite it will turn blue).. That shows you the whole score, in a tradional page format.. If you still see only one track, double click somewhere other than the track, (space in between). Page will toggle between showing one track/ and all tracks..
    To make life easier if you have many tracks to display = create a 'score set'. Label it, (band etc). reduce the size, 50 - 65% whatever. Then go under File in Logic, page set up.. Select the 90 turn, so now the pages longer side to side. You can see more measures at a time..
    You may want to have several score sets, to help with editing. One of everything. another to show just the piano and guitar, etc. This will make it easier to edit, copy paste between staves etc.
    The score editor is very powerful, if you take the time to figure it out, but documentation is vague

  • I have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

    i have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

    What brand/model USB drive? Is it bus or AC powered?
    On Mail...
    First Quit Mail, then I'd backup these two Mail folders, by right clicking on them in the Finder, then choose Archive/Compress.
    Users/YourUserName/Library/Mail
    Users/YourUserName/Library/Mail Downloads
    (Could be a different folder here if you chose such in Mail Prefs)
    Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
    /Users/YourUserName/Library/Preferences/com.apple.mail.plist

  • SS7: How to display all route sets at once, can it be done?

    BTS10200
    Fairly new to softswitch world. Needing to see what route sets already exist. Is there a command I am missing to dump or show all routesets at once?
    Thank You!

    Additional features can be added by adding a feature, vsc, and service:
    http://www.cisco.com/univercd/cc/td/doc/product/voice/bts10200/bts4_1/provgd/feature.htm
    Here is a list of commonly assigned VSCs:
    http://www.cisco.com/univercd/cc/td/doc/product/voice/bts10200/bts4_5/cli/cp/85apc.htm#

Maybe you are looking for