Router still show ISDN up on "sh isdn ac" command even when ISDN down.
Hi experts,
I encounter a situation where my router still showing the isdn is up (in "sh isdn ac" command) even when the ISDN is down (I shut it down). Is it an IOS bug?
My router is Cisco 3640 with IOS Version 12.3(21). The IOS are currently upgrade from Version 12.2(6a).
The ISDN is a backup for leased line to MPLS. It will first call to MPLS nearest node LAC router, and if that failed, it will call to HQ as a last result.
Thanks.
Azmir.
This has to be a bug. Please check the bug navigator. Also, the show isdn status is showing the clear picture. The layer 3 status is showing as 0 active calls. That means it is not able to clear the isdn call history data.
--Pls rate if useful--
Similar Messages
-
I have a wireless router for my house, and my I-phone can find the network and sign in but it won't show up in airport for my i -mac even when right beside the router. What can I do?
Do you have any videos/movies in the video app?
In iTunes if you right click on the video and select Get Info and go to the Option tap what Media Type is shown? -
I deleted all Apps on iPad as they were associated with an out of date Apple ID (which I have forgotten the password) and I could not update them, but the "App Store" logo still shows that there are 2 to be updated and when I go there I cannot delete. Please assist. Thanks.
Why don't you explain what happens when you try to delete these two apps that are showing that they need updates. You can only delete them if they are actually installEd on the iPad. Are they on the device?
-
iMesssage has stopped using my cell phone number and is only showing email addresses -- in other words, when I text, it is showing up as coming from an email address, even when i use my phone. The laptop and phone are still synchronized and messages are showing on both devices.
I've seen this before and was able to fix in Settings, but that is not working now.
Please help. Thanks.Did you replace your iPhone with some other kind of phone? If your phone number is no longer connected to an active iPhone, you can't use it to message from your Mac.
-
F4580 won't connect to new O2 wireless router - still showing as connected to old one
Wireless light constantly flashes.
It's still connected to the old router even tho that is disconnected but it is recognising & discovering the new router.....
Results of NC page as follows:
802.11 Wireless
Hardware Address (MAC) is showing
Status Disconnected
Connected PC(s)
no IP Address - printer is wired up to a MAC (the HP software is installed on it too) & it prints from that fine but we also use it to print wirelessly from a WIndows 7 Laptop & other Apple handheld devices
Number of 802.11 networks discovered: 1
SSID is new router name
Privacy RSN Auth WPA-PSK Encrypt AES/TKIP Signal -63 WPS Yes
Diagnositcs Summary
Wireless On PASS
Wireless Networking PASS
Network Name (SSID) found FAIL
Security PASS
Printer Settings Consitent with Wiresless Router Settings Not Run
No Filtering Not Run
Connected Not Run
Signal Strength Not Run
Other Networks Detected Not Run
Wireless Networks Detected 2
Downlink Counter 155
Channel Not Run
Configuration Summary
Network Name (SSID) showing old router name
Hardware Address (MAC) showing an address
IP Address Not applicable
Configuration Source Not applicable
Communication Mode Infrastructure
Authentication Type Open System
Encryption 64-bit WEP
Any help would be greatly appreciated :-)Thanks for your response Dean! There is no 'screen' on our printer so I'm a bit perplexed how to do what you have suggested. On top of the printer, left hand side there are button's for:
Power
Cancel
Scan {USB only}
Copy Settings x 2 buttons
Black
Colour
Wireless
Basically all we need to know is how to reconnect the Wireless to the new router. The HP Software is working fine with the Ethernet connected MAC & we have no problems printing directly from that. Once the printer is connected to the new router the other devices will be able to see it & connect.
Thanks! -
I put office for MAC on my macbook air--it somehow shows up twice and documents load out there depending on which one you pick. I need to get all of the office installiations off and reinstall but it appears to leave one out there. When I go to applications I cannot see it but I can see it on the icon line on the bottom of the screen. How can I reinstall Office for Mac so there is only one installation on my computer ?
Unfortunately the information given to you by r8er is incorrect, deleting the Office folder from Applications only partially uninstalls Office.
Here are the correct uninstallation instructions for you.
And the icons at the bottom are just shortcuts. -
I have just got a new password and my partner has my old one. I loaded several apps onto my new Ipad. I now have an update on my Oxford Dictionary App. It will not update using my new ID and password and will not update using my former ID and password. All I get is "cannot connect to Itune Store. If I delete App and reinstall under new name - no problem with other apps- but I don't want to pay another $59.00 for the Dictionary. How do I get Itune store to allow the update?
Purchases are tied to the Apple ID they were purchased with. If you use a new ID, you have to buy again.
-
My wireless connection does not always work. At home even standing next to router I will get a message stating I cannot join. My lap top in the next room will be connected just fine.
I would Update firmware of The router
-
BT Exchange upgrade - Homehub still shows as ADSL1...
Hi,
I've had an email last week saying my line would be upgraded today as the exchange has been upgraded. My router was reset earlier but my home hub stats still appear to be showing plain old ADSL. I was under the impression the modulation should show ITU-T G.992.5 and my upstream speeds would improve slightly, but everything seems the same as before. Do I need to do anything at my end for the changes to take place? The hub is a recently fitted 2.0A to replace a faulty 2.0B hub if that is of any help.
Regards
Mike
ADSL line status
Line state
Connected
Connection time
0 days, 0:29:59
Downstream
5,056 Kbps
Upstream
448 Kbps
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
5.9 dB / 20.0 dB
Line attenuation (Down/Up)
48.0 dB / 28.5 dB
Output power (Down/Up)
19.8 dBm / 12.6 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
2453 / 0
CRC Errors (Down/Up)
36 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
11
Solved!
Go to Solution.Hi, I did try a search but it seams that others with a similar issue resorted to contacting the mods to resolve this after being told various things. I'm trying to be patient, but after receiving another email this morning from bt...
Hello,
Good news
This is to let you know that we've now upgraded your line and you should now have an improved, more consistent broadband connection, and maybe a speed increase.
You can find out more at bt.com/networkupgrade
Which is great news but the router still shows ADSL Max even after a reset so I'm still not showing any benefits of the exchange upgrade. Has anyone else had this letter and what were your experiences in the upgrade process. There is a lot of confusion over this but I can't find anything definitive. Do I need to contact a mod or is the initial process for after the upgrade for the modem to have a number of successful days connection before it changes? I'm sure someone out there knows.
Thanks
Mike -
I updated my Ipad with IOS7.1.1. After more then 12 hours, the screen still show the white Apple logo. How can I shut it down or reboot it?
It works really well.
Thank you for your tip.
Alain -
Nokia E72 voice mail icon shows even when I have n...
I have a new Nokia E72 UK edition and am with Orange UK network.
The voice mail notification icon in my E72 always shows in the bottom right of the screen even when I have no voice mail, and have deleted all the messages. This is really annoying, especially as for a while it worked fine.
I tried disabling voice mail notifications, switching the phone on and off, then enabling them again but still no joy.This is quite a common problem on orange UK. It's actually oranges fault.
Some of the following things have been known to clear the fault:
Placing the sim into another non-orange unlocked phone, then checking the voicemail. When put back into the orange phone the icon has gone.
Calling customer services and requesting an over-the-air sim update, this nearly always solves it.
Calling or visiting an orange store and getting the sim card replaced.
Message Edited by psychomania on 12-Jan-2010 02:18 PM -
My iphone shows I've used 839 mb of memory even when I delete most emails how do I fix?
The question has been answered but not that you like to hear.
You have been using an iPhone since 2011 with an iCloud ID that is not yours, how do you explain that?
I saw a message that said your phone was lost and erased, and I was asked to activate my iPhone with my Apple ID.
Since you know it was lost but not by you, you have an iPhone that is not legitimate. Your receipt may get you out of trouble with the police but that doesn't make the iPhone yours.
Activation Lock cannot be bypassed and if the your story is true then you should sort it out with Best.
Read this: http://support.apple.com/kb/HT5818 -
When Primary link restore back route still learn via CE_HQ instead MPLS
Hi Sir,
Please refer my issue as below and attachment for log captured;
1) When primary link down at CE_Branch_1, it will triggered the ISDN to CE_HQ to communicate.
2) When the primary is up again at CE_Branch_1, the ISDN will be disconnected.
3) At CE_HQ, when show ip route the 10.106.15.0 network still appear in static route instead of OSPF route. Hence, LAN user at CE_Branch_1 will not able to access HQ anymore.
4) When sho ip route vrf COURTS at PEWBRF1, you can notice network 10.106.15.0 is still learned via 202.178.128.70 and not 178.28.0.20.
5) Have tried to manipulate the route-map with set local-preference = 50 and set weight = 0 for network 10.106.15.0 that being redistributed from OSPF into MPBGP at PEWBRF1 still doesnt help. Furthermore, I encounter the route have become RIB-Failure when show ip bgp vpnv4 vrf COURTS.
6) At CE_HQ, there is floating static route being configured to point to CE_Branch_1s LAN, ip route 10.106.15.0 255.255.255.0 128.1.1.15.
7) When show ip bgp vpnv4 vrf COURTS 10.106.15.0 and show ip route vrf COURTS 10.106.15.0 at PEWBRF1 the route 10.106.15.0 still prefer to come from CE_HQ. This is the problem, now the CE_HQ can not reach CE_Branch_1.
Please advise.Folks, this is typical working when using OSPF. Using OSPF the down bit is set on LSA (not all of them but I dont need to go down that far). Because the router is redistributing the static routes into OSPF the PE router shall receive the routes via the mpls cloud from that redist point. It will then get them back from the original PE-CE but these will never come in. You have GOT to configure sham-links between any area (PE)s that have a backdoor between them. If the ISDN line is using OSPF then what happens is that the routes across the ISDN line appear as "O" routes and the routes from the PE-CE conenction appear as "IA" routes. Hence the ISDN line is the preferred path. Read up on sham-links as they go into the real detail of why this happens. Once you get used to what is happening it all rather makes sense. :-)
-
I am having an issue where my airport extreme is saying there is no connection to the internet but still shows a green light and the status lights on the cable modem are all good. This is affecting both wired and wireless connection.
Today I had an issue where my iMac (wired) and other wireless devices could not connect to the internet but my work PC (windows 7 and also wired) was connected fine...in fact I was on a VOIP call at the time and had no issues. The only way I have of resolving this issue is to power cycle the airport by unpluging it.
Also, during this time I am unable to access the airport base station through via the airport utilities on my iMac, iPhone, or iPad.I had the same experience yesterday when my airport extreme is green, cable modem has no problem and no internet on wired iMac or no WiFi. After talking to the cable company, there is nothing wrong with the cable modem and the line, the problem is in the System Preference>Network>Advance>DNS of the iMac. I don't know why as it seems like someone just turn my entire set up upside down. The only thing that I can relate to is that I was trying to figure out with Back To My Mac feature in iCloud between office and home.
In the Network, my DNS server somehow is 10.0.1.1 which is internal Apple IP. Take that out and you would see the actual DNS Servers from the providers.
Also when I look at the airport extreme through airport utilities, in Network setting the Router mode is Off (bridge mode). Once change this and everything is good to go. -
How do i update my location as i have moved and it still shows my old place
i moved from wa to fl and my ipad still shows my location as wa how do i fix this
For location the wifi only iPad uses the location of nearby wifi routers that are in Apple's database. You do not have to be connected to the network/router to use that router's location. Thus, it appears that Apple has not yet updated their database. Apple continuously updated their database based on info they obtain from iPhones. No one has been able to find a way to inform Apple of a router or correct is location.
Maybe you are looking for
-
How to install PVM guest in ov 3??
hi I am little bit of confused about what kind of guest i will be able to install on this server : its a 64 bit, Hyper Technology enabled but it does not have VT/AMD-V enabled so i cant be use at fully virtualized guest. so my question, in this circu
-
Beginner question on labview and transducer
i'm trying to understand what a transducer does and what labview can do to it. are these assumption correct? 1) with labview, i can change the frequency of sound waves emitted from a ultrasonic transducer. if i want maximum amplitude of the sound wav
-
I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).
-
Query performance is slow for only 500 objects- CMS timeout
When a report is initially scheduled, I only have the job id as a key to determine the status of what happens to the report. Yes, the job id is not indexed - but the others are. What other fields can i use? I am only retrieving 500 records. SELECT
-
Browser support for RoboHelp 9 WebHelp / not working on IE7
Does Adobe have an official list of what browsers are compatible with RH9's WebHelp? My output works fine on IE9, but in IE7 the TOC is blank and the search doesn't work.